Transcript
MINIDIGGERS
ES 350 ZT Engine KUBOTA D 1503-M Displacement cc 1499 Power Kw 24,9 - Hp 33,4 Operating weight with cabin Kg 3440
ES 400 ZT Engine KUBOTA D 1803-M Displacement cc 1826 Power Kw 28,4 - Hp 38 Operating weight with cabin Kg 4000
Innovative design, power, speed and maximum stability even in extreme conditions WITHOUT THE APPLICATION of additional counterweights. From Eurocomach quality of design comes another tangible solution: 3,5 e 4 ton zero tail minidiggers ES 350 ZT and ES 400 ZT.
MINIDIGGERS MINIESCAVATORI
MINIDIGGERS
VERSATILITY / EQUIPMENTS
The availability of various configurations allows every operator to choose the right machine for its own needs: standard or long digging arm (+ 35 cm), rubber or steel tracks (with or without rubber shoes cover) and a very big range of digging or loading buckets with traditional or quick coupling. The simple or double effect hydraulic arrangement, a standard device on all our Eurocomach minidiggers, allows the use of a big range of equipments with different specifications: from the demolition hammer to the drill, from pliers to grader buckets; everything can be used by simply acting on a switch placed under the footboard.
Automatic Shift-down
Thanks to an auxiliary hydraulic arrangement, it will also be possible to use the cutter in the most correct and functional way..
This device allows the automatic changement from the second to the first speed when the tractive effort increases, without the intervention of the operator.
MINIDIGGER
COMFORT / VISIBILITY
The new generation of Eurocomach zero tail minidiggers has been studied and manufactured in order to guarantee the operator satisfaction. The cabin is spacious and the operator seat is wide and comfortable. Particular attention was given to the inside of the cabin; panels in ABS are on all internal surfaces, the second speed driving gear is placed on the joystick (and not on the pedal) in order to leave more room on the footboard, the seat is adjustable, the front glass has an opening mechanism given from gas springs, there is an efficient heating and ventilation system and, on request, the air conditioning system for a better thermic comfort during the whole year. In order to guarantee the best access to get into and out of the machine in every situation, the door has been designed with a book opening. If the operator needs to leave the door open, it can be fixed to the anchorage points and in this way it can be kept in the outline of the machine.
MAINTENANCE/ACCES TO SUPPLIES
All there is to do is to open the rear panel and everything is within reach in order to carry out the simple but important maintenance operations without difficulties or waste of time (all filters can be reached easily). Fuel and hydraulic oil tanks have an anti-vandalism closing and are protected by the side hood in a safe and easily accessible position.
MINIDIGGERS
TECHNICAL SPECIFICATIONS OPERATING WEIGHT
ES350 ZT
with rubber tracks and Roll Bar Kg with rubber tracks and cabin Kg Travelling speed Km/h (with “automatic shift down”) Slew speed rpm
ES 400 ZT
3300 3440
3860 4000
2,5 - 4,6
2,5 - 4,6
9
9
ENGINE Type and model Power (2800 rpm) Displacement Number of cylinder Cooling system Consumption Alternator Battery
KUBOTA D1503-M KUBOTA D1803-M Kw (Hp) 24,9 (33,4) 28,4 (38) 1499 1826 cm3 3 3 water water Lt./h 4,2 4,5 V (A) 12 (40) 12 (40) V (Ah) 12 (80) 12 (80)
HYDRAULIC CIRCUIT Type: Pump Pump displacement Pump flow Auxiliary circuit Relief pressure
open center open center pist.var.+ 2 gear pist.var.+ 2 gear cc 2x16,8+11,9+3,5 2x16,8+11,9+3,5 Lt./min 2x40+28+8 2x40+28+8 Lt./min 68 68 Bar 230 230
PERFORMANCES Max digging power (bucket teeth) ISO6015 Max digging power (arm) ISO6015 Traction force Ground bearing pressure
Kgf
2400
3200
Kgf
1950
1950
Kgf Kgf/cm2
3400 0,30
3400 0,35
mm mm mm n°
1550 2467 300 3
1700 2470 300 4
Lt. Lt. Lt. Lt. Lt.
40 42 70 12 7
40 42 70 12 7
DIMENSIONS Width Height Track width Nr. of rollers (each side)
FILLINGS Fuel tank Hydraulic oil tank Hydraulic system capacity Cooling system capacity Engine oil
CONTROLS Bucket, booms, swing Translation Swing Demolition hammer Dozer blade
2 joisticks Servo-assisted levers Servo-assisted pedal Servo-assisted pedal Lever
STANDARD EQUIPMENTS • ES 400 ZT:TOPS (EN 13531) / FOPS (ISO 3449) closed cabin with heating system,front windscreenwiper and washer,predisposition for stereo installation,rear view mirrors ( right and left ). • ES 350 ZT:TOPS (ISO 13531) / FOPS (ISO 3449) Canopy • Rubber tracks • Dozer blade ES 400 ZT 1700 mm ES 350 ZT 1550 mm • Automatic emergency brake on rotation and translation • Predisposition for stereo installation into the cabin • Translation double speed with “Automatic Shift Down” (automatic change down from 2° to 1° gear while increasing the traction stress)
• Digging arm ES 400 ZT 1400 mm, ES 350 ZT 1200 mm • Ignition passkey (universal key for all the locks of the machine) • Rear view mirror (right and left) • Adjustable seat with seat belt • Air dry filter with electric indicator of clogging • Service tools compartment • Spare part book, use and maintenance book and tools chest • Unipolar socket on the dashboard and on the top of the cabin for flashing light • Working light on lifting arm • Cylinders protection (boom and dozer) • Hydraulic circuit for hammer / drill / swinging bucket
OPTIONAL EQUIPMENTS • ES 350 ZT:TOPS ( EN 13531 ) / FOPS ( ISO 3449 ) closed cabin with heating system, front windscreen-wiper and washer, predisposition for stereo installation, rear view mirrors ( right and left ). • ES 400 ZT:TOPS ( ISO 13531 ) / FOPS ( ISO 3449 ) Canopy • Steel tracks • Long digging arm • Air conditioner • Security valves on first second arm and blade • Stereo installation • Hydraulic circuit “High flow” for grass cutter • Grass cutter (width mm 800 and mm 1000) • Working lights and rotating lamp on the cabin
SAMPIERANA
s.p.a.
I - 47026 SAN PIERO IN BAGNO (FC) Via Leonardo Da Vinci, 40 Tel. +39 0543.904211 - Fax +39 0543.903108 www.sampierana.com -
[email protected]
• Certified lifting hook with security valves on first and second arm • Mechanic or hydraulic quick coupling (for buckets or fittings) • Buckets from 300 mm up to 1000 mm • Ditch cleaning buckets from 1000 mm up to 1400 mm (both fixed or swinging) • Trapezoidal bucket • Kg. 95/160 hydraulic hammer with bits • Hydraulic pliers for logs (fix or with 360° hydraulic rotor) • Hydraulic drill with bits from 150 mm diameter up to 350 mm diameter and extension for drill bits (mm 1000) • Electric pump for fuel tank filling
Rivenditore: Dealer :
Ruggeri Grafiche (Mo) printed 10/07
CONCRETE SOLUTIONS. ALWAYS
