Transcript
EN0H-1115GE23 R1116
Filter
MiniPlus FF06 Rinsable fine filter
APPLICATION Rinsable MiniPlus FF06 fine filters ensure a continous supply of filtered water. The fine filter prevents the ingress of foreign bodies, for example rust particles, strands of hemp and grains of sand and thus reduces the probability of corrosion. Sediment collected at the bottom of the filter bowl can simply be removed by rinsing the filter. Compact in size, these filters were designed to fit where space is limited.
APPROVALS •
DVGW
SPECIAL FEATURES •
Simple assembly
•
Filtered water supplied even during reverse rinsing
•
Shock resistant clear synthetic material filter bowl enables easy checking of filter contamination
•
Filter and complete filter bowl are replaceable
•
Body with female and male threads
•
All materials are ACS approved
•
All materials are KTW approved
•
Approved by TÜV LGA for low noise, Group 1 without limitations
TECHNICAL DATA Media Medium: Connections/Sizes Connection sizes: Pressure values Max. operating pressure: Operating temperatures Max. operating temperature medium: Specifications Installation position:
Drinking water 1/
2"
- 11/4"
16.0 bar 40 °C
Horizontal with filter bowl downwards
Note:
The filter is constructed for drinking water installations. In case of a process water application the filter has to be proven individually.
Product Specification Sheet • EN0H-1115GE23 R1116 • Subject to change
1
MiniPlus FF06 - Rinsable fine filter
CONSTRUCTION Overview
3
Components Threaded connections (option AA) Housing with female and male threads, without threaded connection Fine filter in clear filter bowl
4
Ball valve
1 2
Materials Brass Dezincification resistant pressed brass Stainless steel, shockresistant, transparent synthetic material filter bowl Brass (Ball Valve body), Stainless steel (ball), Plastic (handle)
Not depicted components Double wring wrench Plastic
METHOD OF OPERATION
INSTALLATION GUIDELINES
The fine filter is composed of a body and a rinsable fine filter insert.
Setup requirements •
Install in horizontal pipework with filter bowl downwards
During normal operation, water flows through the filter mesh to the body outlet. To rinse the filter, the ball valve is opened which discharges the dirt particles. A continous supply of filtered water is available also during the rinse cycle.
•
Install shut-off valves
•
These filters are armatures which need to be maintained regularly
TRANSPORTATION AND STORAGE
•
Ensure good access
–
Keep parts in their original packaging and unpack them shortly before use. The following parameters apply during transportation and storage: Parameter Environment: Min. ambient temperature: Max. ambient temperature: Min. ambient relative humidity: Max. ambient relative humidity
Value clean, dry and dust free 5 °C 55 °C 25 % *
This position ensures optimum filter efficiency
–
Degree of contamination can be easily seen with clear filter bowl
–
Simplifies maintenance and inspection
•
The installation location should be protected against frost
•
Related to the EN 806-2 it is recommended to install the filter immediately after the water meter
•
In order to avoid flooding, it is recommended to arrange a permanent, professionally dimensioned wastewater connection
85 % *
*non condensing
Installation Example
2
Product Specification Sheet • EN0H-1115GE23 R1116 • Subject to change
MiniPlus FF06 - Rinsable fine filter
TECHNICAL CHARACTERISTICS kvs-Values Connection sizes: kvs-value (m3/h):
15 4.0
20 5.8
25 10.4
32 10.4
Pressure drop characteristics
DIMENSIONS Overview
Parameter Connection sizes: Internal threads: Weight: Dimensions:
Flow value at ∆p=0.5 bar: DVGW registration number: Note:
Values R G kg L I h m3/h
1/ " 2 1/ " 2
3/ " 4 3/ " 4
0.7 1.0 140 158 80 90 158 180 1.27 2.27 NW-9301CM0399
1" 1" 1.3 179 100 180 7.0 -
11/4" 1.5 197 105 180 7.0 -
All dimensions in mm unless stated otherwise.
Product Specification Sheet • EN0H-1115GE23 R1116 • Subject to change
3
MiniPlus FF06 - Rinsable fine filter
ORDERING INFORMATION The following tables contain all the information you need to make an order of an item of your choice. When ordering, please always state the type, the ordering or the part number. Options The valve is available in the following sizes: 1/2", 3/4", 1" and 11/4". • standard - not available
Connection type:
Threaded male connections, filter mesh size 100 μm Without connections, filter mesh size 100 μm
Note:
... = space holder for connection size
Note:
Ordering number example for 1" and type AA valve: FF06-1AA
FF06-...AA • -
FF06-...EA •
Accessories Description VST06B Connection set
Dimension
Part No.
1/ " 2 3/ " 4
1" 11/4"
VST06-1/2B VST06-3/4B VST06-1B VST06-11/4B
1/ " 2
ZR06K
Solder connections
ZR06K
Double ring wrench For removing filter bowl (no fig.)
4
- 11/4"
Product Specification Sheet • EN0H-1115GE23 R1116 • Subject to change
MiniPlus FF06 - Rinsable fine filter
Spare Parts MiniPlus FF06 Fine Filters from 1997 onwards Overview
Description
5
2 3 4
Environmental & Energy Solutions Honeywell GmbH Hardhofweg 74821 MOSBACH GERMANY Phone: (49) 6261 810 Fax: (49) 6261 81309 http://ecc.emea.honeywell.com
1
Dimension
Part No.
1 Clear filter bowl with sieve 100 μm and mesh carrier 1/ " KF06-1/2A 2 3/ " - 1 1/ " KF06-1A 4 4 2 O-ring set for mesh carrier (10 pcs.) 1/ " 0903127 2 3/ " - 1 1/ " 0903128 4 4 3 Replacement sieve (5 pcs.) 1/ " 100 μm AS06-1/2A 2 3/ " - 1 1/ " 100 μm AS06-1A 4 4 1 50 μm /2" AS06-1/2C 3/ " - 1 1/ " 50 μm AS06-1C 4 4 4 O-ring set for filter bowl (10 pcs.) 1/ " 0901246 2 3/ " - 1 1/ " 0901499 4 4 5 Connection set threaded connection 1/ " VST06-1/2A 2 3/ " VST06-3/4A 4 1" VST06-1A 11/4" VST06-11/4A
Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Z.A. La Pièce 16, 1180 Rolle, Switzerland by its Authorised Representative Honeywell GmbH EN0H-1115GE23 R1116 Subject to change © 2016 Honeywell GmbH
