Transcript
Mirka Product News 2017 Our stand D 65 in Hall 17
www.mirka.com
2017
2017
Gets you closer. For perfection. Introducing the smart Mirka® DEOS. Powered hand sanding.
Mirka MirkaDEROS DEROS353CV and 383CV Everything you thought you knew about sanders just became history. Imagine the perfect surface. Thanks to the new Mirka® DEOS electric sander, you can obtain that flawless end-result easier and quicker than ever before. By getting you closer to the surface, we bring your sanding experience to a completely new level — you will never go back to hand sanding again.
LIGNA 2017 | Hannover 22.-26.5.2017
Mirka® DEOS is the result of combining our experience with listening to the sanding community. We have taken your needs and requirements one step further — beyond your expectations.
Mirka DEOS – Direct Electric Orbital Sanders ®
This powerful and compact direct electric orbital sander is the newest member in the Mirka electric sander family. The very low profile design, only 101 mm height, gives a high maneuverability and helps deliver precise and efficient sanding performance. A built in electronic motor brake and a smooth, easy to operate lever for controlling the motor speed makes the work easy. At the same time the optimised ergonomics enable a comfortable grip. The small and light sander is naturally equipped with a brushless motor. It possesses also a separate on/off switch for easy and safe handling. This direct orbital sander is together with Mirka® DEROS the smartest tool on the market; Mirka® DEOS features an integrated vibration sensor and Bluetooth low energy technology.
Technical specifications
Mirka® DEOS 353CV
The vibration sensor makes it possible to view the current vibration level through the myMirka app. An in-app purchase allows the follow-up of the daily vibration exposure. The low profile and small size make Mirka® DEOS 353CV ideal for sanding of profiles and hard-to-reach areas. The compact Mirka® DEOS 383CV, on the other hand, is ideal for body filler and primer sanding applications. In combination with Mirka´s net abrasives the tools offer fast, efficient and dust-free sanding performance.
Mirka® DEOS 383CV
Size
70 x 198 mm (3 x 8”)
81 x 133 mm (3 x 5”)
Mains frequency
50/60 Hz
50/60 Hz
Power input
250 W
250 W
Voltage mains supply
220 – 240 V ~
220 – 240 V ~
Speed
5,000 – 10,000 rpm
5,000 – 10,000 rpm
Orbit
3.0
3.0
Weight
1.0 kg
0.97 kg
Height
101 mm
101 mm
Noise level LpA
71 db(A)
69 db(A)
Vibration level
2.6 m/s2
2.6 m/s2
Dust system
Central vacuum ready
Central vacuum ready
LIGNA 2017 | Hannover 22.-26.5.2017
2017
2017
Abranet® Ace HD
– with ceramic grains makes heavy-duty work easy The latest addition to the net abrasive family, Abranet® Ace HD, is durable and tough with ceramic grains. The strong net structure resists high wear and tear and the ceramic grain offers superior cutting performance on various surfaces. The improved woven
mesh backing increases the lifetime of the abrasive, and makes the sanding process faster. The open net construction in combination with a dust extractor enables a dust-free sanding experience. Abranet® Ace HD comes in coarse grits: P40, P60 and P80.
Abranet® Ace HD Technical specifications Bonding
Resin over resin
Grain
Ceramic
Coating
Closed
Colour
Brownish
Grit range
P40–P80
Backing
PA net
LIGNA 2017 | Hannover 22.-26.5.2017
Available as • Discs and Rolls Applications • Paint stripping • Various wood types • Composites • Metal • Soft and resinous materials
Mirka® Roundy Hand-Sanding Block and Kit – an ergonomic and dust-free tool for improved productivity We proudly present our new hand sanding block, the Roundy Dust-Free Hand Block. This new block can be used together with Abranet® 150 mm (6”) discs for dust-free sanding or with 15-hole paper or film discs. As the same sized abrasive can be used with both the Roundy hand block and the Mirka® DEROS electric sander, there is no need for keeping both discs and strips with you.
Key features • Universal – can be used with both net and 15 hole 150 mm discs • Dust-free – when used together with net products + dust extractor system • Ergonomic – low design and shaped out for fingers • Practical – abrasive on sides to get into corners and hard-to-reach areas • Unique design – enables use of 150 mm discs for manual dust-free sanding Roundy Kit content • Roundy dust-free hand block • Vacuum hose 20 mm x 4 m • 5 x 150 mm Abranet P120 • 5 x 150 mm Abranet P180 • 5 x 150 mm Abranet P240 • Adapter for use with 28 mm x 4 m hose
LIGNA 2017 | Hannover 22.-26.5.2017
2017
2017
From the creator of... dust-free perfection.
LIGNA 2017 | Hannover 22.-26.5.2017
LIGNA 2017 | Hannover 22.-26.5.2017
2017
2017
Work Station for Dust Extractor 1230 There was a need on the market for a compact shelf and hook system based on the new Mirka® Dust Extractor 1230 -series. Straight forward functionality has been the emphasis in the development phase of the work station.
Functionality and features Two hooks designed for Mirka® DEROS / DEOS or Mirka® ROS / PROS / OS Shelf with space for 4 x 150 mm disc boxes. Additional shelves or hooks can be ordered separately. Mirka® Dust Extractor 1230 L PC (Push & Clean) Mirka® Dust Extractor1230 L AFC (AutoFilterCleaning) Mirka® Dust Extractor 1230 M AFC (AutoFilterCleaning)
Dedicated space for Mirka cases or other products Hose storage hook
Mirka® Dust Extractor 1230 – improve your performance Today, health and safety issues are becoming more and more important. Sanding tools and abrasives are made more and more efficient, with focus on dust-free applications. This development places higher requirements on the dust extractors. To meet these demands, the Mirka dust extractor range has been extended with new versions. Mirka® Dust Extractor 1230 L PC is a model that requires manual filter-cleaning, while the two other models (AFC) are equipped with an automatic filter-cleaning system. The efficient filter cleans itself every 15 seconds which clearly improves the performance of the dust extractor. The 1230 dust extractor range is equipped with a highperformance 1200 W motor and a 1-stage turbine that creates 250 mbar suction with an airflow of 4500 l/min. The new 1230 dust extractors include the auto-start function. As the dust extractor only runs when the power tool is in use, thanks to the auto start function, there is less
LIGNA 2017 | Hannover 22.-26.5.2017
noise and at the same time the dust extractor gains a longer lifetime. Bigger wheels significantly improve maneuverability on uneven floor surfaces. Another advantage is that the filter is easy to reach through a separate opening in the back without removing the upper part.
Mirka® Dust Extractor 1230 L/M Technical specifications Voltage mains supply
220 – 240 V ~
Mains frequency
50/60 Hz
Power input
1200 W
Volume flow air
4500 l/min
Vacuum
250 mbar
Noise level, LpA
60 dBA
Tank volume
30 l
Dimension W x D x H
385 x 565 x 565 mm
Weight
14.5 kg
Shelf with space for 4 x 150 mm disc boxes. Additional shelves or hooks can be ordered separately.
Two hooks designed for Mirka® DEROS / DEOS or Mirka® ROS / PROS / OS.
Dedicated space for Mirka cases or other products.
Hose storage hook.
LIGNA 2017 | Hannover 22.-26.5.2017
2017
2017
Mirka® AROS-B 150NV
Mirka® AOS-B 130NV
Mirka® Cordless sanders
Mirka® AIROS robot sander
Mirka is introducing the first small brushless battery driven spot repair sanders. The ergonomic design has been a priority to ensure that the light tool can comfortably be used for long periods without fatigue.
The Mirka Automated Industrial Random Orbital Sander, Mirka® AIROS, is an electric sander in an aluminium housing with a flange for mechanical coupling to robots according to ISO 9409-1. The tool is designed to offer maximum flexibility by enabling all mechanical couplings from standard ISO to be customised by means of an adapter. The motor runs on 48V, making it extra safe for wet sanding.
– battery driven powerful performance
When using a cordless sander the operator can freely move around the object. As no pneumatic hose is needed the risk of the hose causing defects on the surface being sanded is removed. Cordless sanders are more energy efficient compared to pneumatic tools. The sanders do not require oiling, which removes the risk of contamination from compressed air supply.
– the first smart sander for industrial robots
The smallest battery driven spot repair sander on the market, Mirka® AOS-B cordless sander has been awarded with the Red Dot Design Award 2017.
Features and benefits. • Up to 16 hours of use in spot repair sanding operations • No need of hose that will distract the operator • Ergonomic handle • Low noise and vibration level • Easy attachment of backing pad with help of a Quick lock -system • The lithium-ion battery charges in only 45 minutes.
Technical specifications
Mirka® AROS-B 150NV
Mirka® AOS-B 130NV
Battery charger
BCA 108
Voltage
10.8 VDC
10.8 VDC
Input
100 – 240 VAC, 50/60 Hz
Speed
4,000 – 8,000 rpm
4,000 – 8,000 rpm
Charging time
< 40 min (2.0 Ah)
Orbit
5.0 mm (3⁄16”)
3.0 mm (1⁄8”)
Storage temperat. range
–20 ˚C…80 ˚C
Size of pad
Ø 32 mm (1 ⁄4”)
Ø 32 mm (1 ⁄4”)
Charging temperature
– 0 ˚C…40 ˚C
Degree of protection
III
III
Dimension
191 x 102 x 86 mm
Battery pack
BPA 10820
Net weight
0.66 kg
Type
Rechargeable Li-ion 3I(NCM)R19/65
Degree of protection
II /
Battery voltage
10.8 VDC
Capacity
2.0 Ah 21.6 Wh
1
LIGNA 2017 | Hannover 22.-26.5.2017
1
Benefits • Constant rpm: process is more stable, quality level is reproducible, rpm is constant even under high load • Configurable rpm according to needs • Live data from control electronics, possibility to learn about the application and improve the quality of the result based on logged data • No lubrication oil needed in the machine • Specially designed for robotic sanding applications • Customised flanges for most robot types
Mirka® AIROS Technical Data Code
MIA6502011
Size
150 mm (6”)
Power
350 W
Input voltage
90 – 264 VAC
DC voltage to sander
48 VDC
Speed
4,000 – 10,000 rpm
Orbit
5.0 mm
Weight
1.3 kg
Height
113 mm
Size of pad
150 mm (6”)
Ambient operating temperature
0 – 45 °C
Vacuum hose
Ø 27 mm
Communication interfaces
Modbus RTU RS-485 included Profinet - Modbus gateway optional. Other alternatives available.
LIGNA 2017 | Hannover 22.-26.5.2017
Brazil Mirka Brasil Ltda. Canada Mirka Canada Inc. China Mirka Trading Shanghai Co., Ltd Finland & Baltics Mirka Ltd France Mirka France Sarl Germany Mirka GmbH India Mirka India Pvt Ltd Italy Mirka Italia s.r.l. Mexico Mirka Mexicana S.A. de C.V. Russia Mirka Rus LLC Singapore Mirka Asia Pacific Pte Ltd Spain KWH Mirka Ibérica S.A.U. Sweden Mirka Scandinavia AB Turkey Mirka Turkey Zımpara Ltd Şirketi United Kingdom Mirka (UK) Ltd United Arab Emirates Mirka Middle East FZCO USA Mirka USA Inc. For contact information, please visit www.mirka.com
©Mirka Ltd MA052017FG
MIRKA LTD Finland
