Transcript
MK-100 TRACKER TILE SAW OWNER’S MANUAL & OPERATING INSTRUCTIONS
CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below. The Serial Number is located on the left side of the blade guard.
SERIAL NUMBER: NOTE: For your (1) one year warranty to be effective, complete the warranty card (including the Serial Number and mail it in as soon as possible.
EXPLODED VIEW AND PARTS LIST EXPLODED VIEW:
MK-100 TRACKER
Revision 02/03, Effective Date February 12, 2003
Page 39
EXPLODED VIEW AND PARTS LIST PARTS LIST:
Item A A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A11a A12 A13 A14 A15 A16 A17 A18
Description Accessory Pack Wrench, 15/16 Closed End Curtain, Splash Bracket, Splash Curtain Wingscrew, 1/4-20 X 1/2 Washer, 1/4 SAE Flat Pump, 115v Water Fitting, Plastic, 1/4 FNPT X 1/4 BARB Hose, Vinyl, 1/4 ID Clamp, Flow, 1/4-1/2 Owner’s Manual, Water Pump Rip Guide (comp) Screw, 1/4-20 X 3/4 Thumb Blade, MK-100, 10 X 060 X 5/8 Owner’s Manual, MK-100 TRACKER Carton, Accessory Pack, 101 Foam, Accessory Pack Carton Card, MK Warranty Registration Label, Do Not Return Sell Sheet, Tile Accessory
Qty 1 1 1 1 1 1 1 2’ 1 1 1 1 1 1 1 1 1 1 1
Part # n/a 134684 134841 152571 151888 151915 151271 128397 132951 154394 155745 134551 150991 154380 153366 154022 155037 157063 156915
B B1 B2 B3 B4
Carton Carton, 100 Insert, Carton, Cutting Head Insert, Carton, Accessory Pack Pallet, 101, Plastic
1 2 1 1
n/a 158541 158542-1 158542-2 158767
C-E
Assembly, Frame
-
n/a
C C1 C2 C3 C4 C5
Frame Frame, 101 Pan, Plastic, 101 Pin, 3/16 X 3/8 Roll Plate, Adjustment Plug, Rubber Drain
1 1 2 2 1
n/a 153003 150634 151783 151758 153439
D D1
D3 D4 D5 D6
Post Post, DC, 101, MK Red (comp) Post, DC, 101 (raw) Shaft, 10.63” Pivot, 101 Steel, 1 Dia C1045 CDS Screw, 3/8-16 X 1/2 Socket Head Set Plate, Support Screw, 3/8-16 X 2 1/2 Washer, 3/8 Split Lock
1 1 1 .92’ 1 1 2 2
n/a 158438 158437 153254 156193 153710 155671 156030 150925
E E1 E2 E3
Stop, Cutting Head Kit, Stop, 10” Cutting Head Stop, 10” Cutting Head Screw, 1/4-20 X 1 1/4 Hex Head Cap Washer, 1/4 Split Lock
1 1 1 1
157728-MK 157728 157145 152591
D2
MK-100 TRACKER
Revision 02/03, Effective Date February 12, 2003
Page 40
EXPLODED VIEW AND PARTS LIST Item F-J F F1
F2 F3 F4 F5 F6 F7 F8 F9 G G1 G2 G3 G4 G5A H H1 H2 H3 H4 H5 H6 H7 H8 H9 H10 H11 H12 H13 H14 H15 H16 H17 H18 H19 H20 H21 H22 H23
Description Assembly, 115V Cutting Head, MK-100
Qty 1
Part # 158225
Belt Guard Belt Guard, MK-100 (comp) Belt Guard, MK-100 logo (raw) Insert, 3/8-16 AVK Bracket, Inner Belt Guard, 100/101/101Pro Screw, 1/4-20 x 3/4 Hex Head Cap Screw, 1/4-20 x 1 Hex Head Cap Washer, 1/4 Split Lock Washer, 1/4 SAE Flat Belt, 260J6 Micro-V Knob, 3/8-16 X 1.5 MK Adjustment Washer, 3/8 SAE Flat
1 1 2 1 3 1 4 4 1 1 1
n/a 158319-00 158318-00 158193 158611 152370 152676 152591 151915 158194 156770-2 150923
Blade Guard Blade Guard, 101/115 (comp) Blade Guard, MK logo (raw) Elbow, 1/8 MNPT X 1/4 BARB 90° Brass Tube, Water Tubing, Stainless Steel 1/4 OD X .028 wall Screw, 5/16-18 X 1/2 Socket Head Set Label, Tile saw Serial #, No Mark
1 1 1 1 2 .75‘ 3 1
n/a 153659 152508 154652 155389 152579 152607 157249-01
Subassembly, 115V Cutting Head, MK-100 Head, 10” Cutting (comp) Head, 10” Cutting (raw) Pin, Blade Shaft Lock Spring, Blade Guard Lock E-Ring, 1/4 Retaining Bearing, 17mm X 40mm X 12mm Ball (6203-2NSE) Shaft, Blade 880/101/1080 Steel, 3/4 Dia C12L14 Flange, 2-3/8 Inner Steel, 2-3/8 Dia C12L14 Flange, 2-3/8 Outer Nut, 5/8-18 Hex Pulley, 6J19 X 5/8 Bore Steel, 2.0 Dia C1215 CD Key, 3/16 x 3/16 x 1 1/8 Square Screw, 5/16-18 X 3/8 Socket Head Set, Cup Point Bumper, 1/2 Dia Rubber Screw, 5/16-18 X 1 Hex Head Cap Washer, 5/16 SAE Flat Washer, 5/16 Split Lock Nut, 5/16-18 Hex Screw, 5/16-18 x 2 1/2 Hex Head Cap, Full Thread Pivot, Blade Guard Washer, 3/8 SAE Flat Wingnut, 5/16-18 Nylock Strap, Motor Adjustment Screw, 3/8-16 X 3 1/2 Hex Head Full Thread
1 1 1 1 1 1 2 1 1’ 1 .09’ 1 1 1 1.5” 1 2 1 4 4 4 4 1 1 2 1 1 1
158191 158224 158223 158200 158201 158202 137711 158222 154188 137737 154196 135830 135848 158199 154723 150344 157083 152674 151743 151754 151747 101196 151748 153208 150923 151746 152673 153147
MK-100 TRACKER
Revision 02/03, Effective Date February 12, 2003
Page 41
EXPLODED VIEW AND PARTS LIST Item J J1 J2
J11 J12 J13 J14 J15 J16 J17 J18 J19 J20 J21 J22 J23 J24 J25 J26
Description Assembly, 1.5hp/115V/60Hz GE Motor Motor, 1.5HP\115V\60Hz GE Casting, Conduit Box (comp) Casting, Conduit Box (raw) Gasket, Conduit Box / Motor Screw, #12 X 5/8 Indented Hex Washer Slotted B Cord, 14/3 SJTW X 5-15P X Power Cord, 18/3 SJTW X 5-15R Pump Switch, 20A DPST Toggle, w/ QD Terminals Plate, Toggle Switch Lockout Boot, Toggle Switch Pulley, 6J17 X 5/8 Bore Steel, 1.75 Dia C1215 CD Key, 3/16 x 3/16 x 1-1/8 Square Screw, 5/16-18 X 3/8 Socket Head Set, Cup Point Label, Warning, Read Owner’s Manual, 1-3/4 X 3-3/8 Label, Caution, GFCI, 1 X 2 1/8 Label, Caution, 5 Amp Max., 1 X 2-1/8 Label, MK Service Info., 2 1/8 X 1-13/16 Screw, 10-32 X 3/8 Hex Washer Head Grounding Washer, #10 Internal Tooth Lock Tie, 12 X #10 Clamp Screw, 10-32 X 1 Socket Head Set, Cup Point Nut, 10-32 Hex Washer, 1/2 Internal Tooth Lock Capacitor, 50mF Run, w/ QD Terminals Terminal, 16-14 X .250 90° Female Spade Capacitor, 270-324mF Start, w/ QD Terminals Switch, Overload Protection
K-M
Assembly, Tracker Wheel Table, MK
1
159554
KA KA1 KA2 KA3 KA4 KA5 KA6 KA7 KA8 KA9
Table, Tracker Wheel Assembly, Tracker Wheel Table Table, Tracker Wheel (comp) Table, 100/101 (raw) Wheel, Conveyor Cart Nut, Hex w/ WSHR 5/16-18 Frame, Tracker Wheel Stop, MK Tracker Wheel Table Screw, 10/24 x 1/4 Socket Set – Cup Point Screw, 5/16-18 x 3/4 Hex Head Cap Washer, 5/16 Split Lock Washer, 5/16 SAE Flat
1 1 1 2 2 1 1 2 4 4 4
159554 158962 157597 133090 153942 158937 159652 157522 151369 151747 151754
MA MA1 MA2 MA3 MA4 MA5 MA6 MA7
Dual Roller Wheel Assembly, Dual Roller Wheel Bracket, Dual Roller Wheel Wheel, Roller Screw, 1/4-20 X 1 1/2 Hex Head Cap Washer, 1/4 SAE Flat Nut, 1/4-20 Hex Shim, .004 X 5/16 ID X 1/2 OD
1 1 2 2 2 2 ~4
159549 159548 151799 151914 151915 151893 152519
J3 J4 J5 J6 J7 J8 J9 J10
MK-100 TRACKER
Revision 02/03, Effective Date February 12, 2003
Qty 1 1 1 1 1 2 1 1 1 1 1 1 1.5” 1 2 1 1 1 1 1 2 1 1 2 1 1 1 1 1
Part # 158297 157980 157971 158077 158213 158335 158205 158253 154310 158211 154301 158214 155342 150344 157083 155806 155678 154822 155038 158209 158336 158210 158254 156269 158337 158242 158798 158206 158207
Page 42
