Transcript
MIGHTY MO CABLE MANAGEMENT SYSTEM
ONE SIZE FITS ALL
Mighty Mo Wall Mount Cabinet
Mighty Mo 3 Clear
Mighty Mo 3 Mighty Mo 4-Mation
www.ortronics.com 800-934-5432 (sales) 877-599-5393
MIGHTY MO 3 CABLE MANAGEMENT RACKS The patented Mighty Mo 3 is a high density racking solution available with your choice of vertical management: interbay with latches or cable management rings. Ortronics patented channel construction protects and conceals your horizontal cabling like no other rack. Mighty Mo 3 has built-in strain relief, bend radius control, and cable routing with floor and ceiling cable access for distribution cables. It will support split equipment shelves and heavy electronic devices. Power strips and other accessories can be mounted to the rear EIA pattern. Mighty Mo 3 can be assembled as a 19" or 23" W (483 mm or 584 mm) rack. No additional hardware is needed. Patent No. Des.: 360,189
7 FOOT PART NO. OR-60400169 OR-60400169-59 OR-60400454 OR-60400454-59
6.5" (165 mm) channel, Black 6.5" channel, Clear 16.25" (412.75 mm) channel, Black 16.25" channel, Clear
OR-60400169 shown in black
OR-60400869-59 shown in clear
Construction: Aluminum Color: Black or Clear Weight: 6.5" channel: 40 lbs. (88 kg) 16.25" channel: 45 lbs. (99 kg) Mounting Space: 44 rack units front and 44 rack units rear Capacity: 500 lbs. (evenly distributed with bottom of rack securely fastened), 800 lbs. (evenly distributed with bottom of rack securely fastened and top of rack braced to a structural building component) Assembly required 8 FOOT PART NO. OR-60400869 OR-60400869-59 OR-60400854 OR-60400854-59
6.5" (165 mm) channel, Black 6.5" channel, Clear 16.25" (412.75 mm) channel, Black 16.25"channel, Clear
Construction: Aluminum Color: Black or Clear Weight: 6.5" channel: 44 lbs. (97 kg) 16.25" channel: 50 lbs (110 kg) Mounting Space: 51 rack units front and 51 rack units rear Capacity: 500 lbs. (evenly distributed with bottom of rack securely fastened), 800 lbs. (evenly distributed with bottom of rack securely fastened and top of rack braced to a structural building component) Assembly required
MIGHTY MO CABLE MANAGEMENT SYSTEM
Top View of Base Angles (when assembled for 19" mounting)
MIGHTY MO 3 SYSTEM ACCESSORIES The Vertical Cable Management Channel’s patent pending design promotes efficient routing of patch or cross connect cables between racks. The channels and hinged latches allow easy access during moves, adds, or changes. The 6" (152 mm) channel is used where two Mighty Mo 3 racks are bolted side by side. It creates a 2" (51 mm) channel between racks for front to back routing of equipment cables and patch cords. Both versions include all necessary mounting hardware. Available in two heights. Note: To order in Clear finish, add -59 to the end of the part number. Patent pending 7 FOOT PART NO. OR-60400433 6" W (152 mm), Black OR-60400435 4" W (102 mm), Black
End Panel The End Panel is used to finish the end of a row of Mighty Mo racks. It mounts flush and provides a surface for the Vertical Cable Management Channel while concealing cables in the rack channel. All necessary mounting hardware is included. For 7 foot racks only. PART NO. OR-60400428 OR-60400496
Cable Management Rings These rings allow efficient routing of patch or cross connect cables between distribution racks. They can be mounted where needed on the front and back of the Mighty Mo 3. Set of 14 includes mounting hardware.
8 FOOT PART NO. OR-60400509 6" W (152 mm), Black OR-60400510 4" W (102 mm), Black
Channel Cover The Channel Cover gives your installation a clean and professional look. It hangs on the front of the Vertical Cable Management Channel without hardware for quick, easy installation and removal. The Channel Cover is available in two widths for 7 foot racks. PART NO. OR-60400434 OR-60400436
PART NO. OR-60400017 2" W x 6" D (51 mm x 152 mm) rings, Black OR-60400017-59 2" W x 6" D (51 mm x 152 mm) rings, Clear
Cable Management Rings These plastic cable management rings flex at the end for easy insertion or removal of cross connect cables. They snap in place on the front and back of the Mighty Mo 3 and Mighty Mo 4-Mation. No hardware needed. Set of 14.
For use with OR-60400433. 6.25" x 77.75" x .875" (158 mm x 1.98 m x 22 mm) For use with OR-60400435. 4.25" x 77.75" x .875" (108 mm x 1.98 m x 22 mm) PART NO. OR-60400614
Cable Runway Support Bracket Plate The Support Bracket Plate mounts to the top of OR-60400429 and provides a mounting location for 12" through 18" ladder racking. Mounting hardware is included. Dimensions: 19" x .125" x 8" (483 mm x 3.2 mm x 203 mm)
6.5" D (152 mm) 16.25" D (412.75 mm)
PART NO. OR-60400430 Black OR-60400430-59 Clear
Vertical Cable Management Channel
1.75" W x 6" D (44.45 mm x 152 mm) Black
Cable Runway Mounting Bracket This bracket mounts to the top of a 6.5" (512.75 mm) Mighty Mo channel and provides a mounting location on the side for 6" through 12" ladder racking. PART NO. OR-60400238
Black
Double Equipment Shelf for Mighty Mo Racks Cable Runway Support Bracket The Bracket mounts on the top of Mighty Mo racks. It provides a mounting surface for the OR-60400430 plate that is 3.75" (95 mm) above the top of the rack for parallel or perpendicular mounting of ladder racking. The bracket uses rack hardware for mounting. PART NO. OR-60400429
For 6.5" channel. 23.25" x 5.5" x 6.2" (591 mm x 140 mm x 157 mm) OR-60400429-59 Clear OR-60400494 For 16.25" channel. 23.25" x 5.5" x 15.95" (591 mm x 140 mm x 405 mm)
This shelf works with Mighty Mo 6.5" D (165 mm) Racks. Dimension: 17.5" x 5.25" x 22" (445 mm x 133 mm x 559 mm). Holds up to 150 lbs (68 kg). 2 pieces, four point mounting. PART NO. OR-60400355 For rack mount applications only, Black OR-60400355-59 Clear
Note: All Ortronics products dimensions are shown by width, height and depth unless specified otherwise.
contact us: 1-800-934-5432 (sales) or 1-877-599-5393
•
w w w. o r t r o n i c s . c o m
MIGHTY MO 4-MATION Mighty Mo 4-Mation Server Rack Ortronics new Mighty Mo 4-Mation Server Management Rack will support almost any server available today. It is the perfect solution for Data Centers, ISP/ASP Installations and Colocation Facilities. Ortronics engineers have given the old “four post“ rack a new dimension with the addition of patent pending adjustable equipment mounting rails. These rails allow the depth of the rack to be adjusted from 6 to 32 inches, independent of the structural members. This makes it possible to mount “half height“ rails on the frame so that equipment with different depth requirements can be mounted on one rack. The rails can also be adjusted after the rack is completely installed! Even more! The Mighty Mo 4-Mation’s base angles are reversible. This allows them to be mounted facing out for a wider stance if the rack is to be free standing, or either of the bottom angles can be turned inward to keep the footprint within a 2 foot square. Raised floor panels in front of and behind a row of Mighty Mo 4-Mation Racks can now be removed—even when the rack is adjusted to hold deep equipment. The Mighty Mo 4-Mation accepts all 3 styles of Mighty Mo cable management. Mighty Mo 4-Mation can be assembled as a 19" or 23" W rack without additional hardware. Patent Pending PART NO. OR-60400224
Construction: Aluminum Frame with Steel EIA Rails. Assembly required. Supplied with 50 12-24 cage nuts and screws Color: Black Weight: 90 lbs. (200 kg) Mounting Space: 44 rack units
Mighty Mo 4-Mation Equipment Shelf The Mighty Mo 4-Mation Equipment shelf has a fixed front flange with an infinitely adjustable rear flange that allows for secure 4 point mounting as deep as 30”. Mounting hardware included. PART NO. OR-60400538
17.25" x 1.7" x 30" (438 mm x 43 mm x 762 mm)
Construction: Aluminum Color: Black Weight: 8 lbs. (3.6 kg) Holds up to 200 lbs (91 kg)
Adjustable EIA Half-Height Rail Kit These Rails mount on the Mighty Mo 4-Mation and adjust so that equipment of different depths can be mounted on the same rack. PART NO. OR-60400222
17.25" x 1.7" x 30" (438 mm x 43 mm x 762 mm)
Construction: Steel Color: Clear Weight: 9 lbs. (19.8 kg) Mounting Space: 23 rack units
Power Strip for Mighty Mo 4-Mation 8 position 20 amp outlet strip with circuit breaker, switch, and 15' (3.81 m) cord. PART NO. OR-50900053
1.5" 24" x 1.5" (38 mm 610 mm x 38 mm)
MIGHTY MO SPEEDNUT Faster Assembly! Now included with every Mighty Mo 3 & 4-Mation! The Mighty Mo Speednut increases the speed and ease of assembly, while adding extra strength to your racks. Hold the Speednut behind the rack while handtightening the bolts in front. Speednut eliminates the need for a second wrench! Finish tightening with a wrench and your rack is ready to load.
MIGHTY MO SYSTEM ACCESSORIES CPU Tie Down Kit
Monitor Strap Kit
Ortronics CPU Tie Down Kit includes mounting plates with rubber bumpers which can be quickly attached to the EIA pattern on the front and rear of any rack with a rail depth of from 3" (76.2 mm) to 6.5" (165 mm). The velcro strap with elastic center safely holds the CPU in place against the rubber bumpers. The CPU can be quickly removed for service. Patent pending. PART NO. OR-60400523
The Monitor Strap Kit consists of hook and loop straps which can secure a monitor with a base of any size or shape to Ortronics shelves OR-60400355 and OR-60400538. Installation of the kit is fast and easy, and the monitor screen remains fully adjustable. PART NO. OR-70700126
Includes 4 12-24 mounting screws.
Cable Management Rings
Cable Management Rings
Includes mounting hardware. PART NO. OR-60400062
Black plastic Management rings. Snap-in place, no hardware needed. Package of 2
Pkg. of 2. 2" x 6" (51 mm x 152 mm)
PART NO. OR-60400542
1.75" x 6" (45 mm x 152 mm)
Ceiling Extension Kit for 6.5" Channel Mounts on the top of Mighty Mo II and 3 Racks with 6.5" (165 mm) channels. The kit extends the channels 22.75" (578 mm) above the 7’ (2.13 m) channels and provides a mounting surface for a channel cover (not included). Kit includes 2 extensions and uses rack hardware for mounting. PART NO. OR-60400065
2.81" x 24" x 6.25" (71 mm x 610 mm x 159 mm)
19" Equipment Support Bracket Mounts on the rear of any 19" (483 mm) EIA rack to support the weight of heavy equipment. Especially effective on the Mighty Mo racks where the channel depth is 6.5" (165 mm) or deeper. PART NO. OR-60400383
19" x 1.72" x 1" (483 mm x 44 mm x 3 mm). Includes 12-24 Mounting screws.
19" (483 mm) Rack Mount Power Strips The 8 outlet 20AMP Rack Mount Power Strips are available with or without a switch, and with a standard 3 prong or twist-lock plug design. All 4 Power Strips come with 15' (4.57 m) of cord. PART NO. OR-50900051 OR-50900051-TL OR-50900052 OR-50900052-TL
With switch With switch and twist lock plug No switch No switch, with twist lock plug
Power Strip for Mighty Mo 16 position outlet strip with circuit breaker, switch, and 15' (4.57 m) cord. PART NO. OR-60400381
1.5" x 49" x 1.5" (38 mm x 1245 mm x 38 mm)
Grounding Kit for Racks This kit provides a systems ground for the distribution rack. One grounding kit is recommended for each rack. PART NO. OR-60400010
Cable Management Straps Strips use hook and loop type latching closures. PART NO. OR-70700084-00 12-18" straps (457 mm)
MIGHTY MO CABLE MANAGEMENT SYSTEM
Manage your cabling and your bottom line!
Side Mount Channel
Ortronics 19" EIA Rack
6" x 6" x 77.75" OR-60400226
OR-604004600
Side Mount Channel 4" x 6" x 77.75" OR-60400227
Self Supporting EIA Racks
and 2 top support angle cross members.
Designing a cable management system with an eye on your bottom line? Here's your solution! Ortronics designs performance & flexibility into every system—even if your budget is limited. Our Self Supporting EIA Rack can stand alone or bolt side-by-side. Add our 4 or 6 inch Vertical Cable Management Channels, and you’ve got a solution that delivers standards compliant, optimal routing of patch or cross connect cables. The vertical channels makes the administration of moves, adds and changes a snap! Ortronics 19" (483 mm) and 23" (584 mm) Self Supporting EIA Racks consist of 2 U-channel type uprights 7' (2.13 m) high, 2 base
PART NO. OR-604004600 19" x 7' rack (483 mm x 2.13 m) OR-604044454 23" x 7 rack (584 mm x 2.13 m)
Construction: Aluminum Color: Black Panel Mounting Holes: #12-24 thread, .625" x .625" x .5" (16 mm x 16 mm x 13 mm), universal hole pattern, front and rear. Mounting Space: 44 rack units front and 44 rack units rear Assembly required
•
w w w. o r t r o n i c s . c o m
© 2001 Ortronics, Inc.
contact us: 1-800-934-5432 (sales) or 1-877-599-5393
