Transcript
MMA10G-KVM-TXM-2: Modular Dual KVM Transmit Gateway
Specifications Function:
Evertz’ MMA-10G is a network based AV distribu on solu on constructed using Evertz’ award winning SDVN (So ware Defined Video Network) architecture. MMA-10G u lizes a highly reliable 10GE/100GE infrastructure for rou ng video and audio and offers unprecedented scalability and reliability.
Modular 10GE KVM Transmitter The MMA10G-KVM-TXM-2 modular 10GE KVM transmit gateway accepts up to two video inputs, audio and USB and transmits them over a 10GE interface. The KVM-TXM is a modular device and is installed in a rack mount modular frame, this approach offers flexibility and density as well as a secure and reliable solu on for moun ng along next to servers. The KVM-TXM provides two HDMI inputs with two local loop out connec ons. USB2 can be sent at full bandwidth over the 10GE interface via the USB type B connec on. Unique to the Evertz MMA-10G series a local Ethernet port allows for Ethernet traffic to be delivered over the 10GE infrastructure. The dual 10GE ports of the KVM-TXM can be used for redundant network applica ons (HOT/HOT) for mission cri cal applica ons.
Advanced HDMI interface The MMA10G-KVM-TXM supports customizable EDID tables to insure the smoothest handoff between the source device and the gateway. The KVM-TXM supports HDCP and therefore can send content protected images without compromising rights management.
Reliable AV Transport Using 10Gbps Ethernet the MMA10G-KVM-TXM encapsulates video, audio, USB2 and Ethernet at the same me. KVM-TXM has two HDMI inputs plus two local loop outs for easy in rack setup of sources. The KVM-TXM can support up to 3480x2160 (UHD) @30 frames/sec or 4:2:0 @60 frames/sec. KVM-TXM supports both embedded audio on HDMI as well as a discrete audio input. The KVM-TXM deliver content without compression, therefore video and audio remain at their highest quality with no latency upon delivery.
Fully integrated with MAGNUM-AV controller MMA10G-KVM-TXM-2 is a managed element of the MMA-10G network which is controlled by MAGNUM-AV. MAGNUM-AV provides simple and unified control of the en re system using Evertz virtual control panels and touch friendly graphical user interfaces (VUE) or via third party control systems.
Remote Monitoring The MMA10G-KVM-TXM-2 can be remotely monitored via SNMP protocol using Evertz award winning VistaLINK Pro NMS so ware suite. VistaLINK allows a single user from a single work sta on complete visibility into the opera on of the MMA-10G eco system. By u lizing VistaLINK PRO the operator can quickly and easily prevent issues from becoming outages.
Modular KVM Gateway: Dual HDMI input, Audio, USB2, Ethernet
Attributes Video Inputs: Supported Res:
2 HDMI + loop out VESA, CEA-816B
Audio Inputs: Audio Level: Audio Input Imp:
1 stereo analog (3.5mm) Line level 25Ω
USB:
USB 2.0 (type B connector)
Ethernet Transport: 1GE (10/100/1000 802.3) Ethernet connector: SFP+ cage (optical or RJ45 SFPs available) 10GE Outputs:
2 SFP+ cages (see ordering options)
Scaling: HDCP Support: HDMI audio: Control Protocols: Control System: In-band control:
No Yes Yes SNMP MAGNUM-AV No (uses 7800FC)
Physical Modular design: Slots: Voltage: Power:
7800 series device, installed in 7800FR 2 12VDC (provided by frame) 25W
Ordering Info MMA10G-KVM-TXM-2: Modular 10GE KVM transmitter, dual HDMI inputs, single analog audio input, & USB 2.0 interfaces
Rear Plate
Ordering Options 7800FR-QT: 7800FC:
Modular Quiet frame, 3RU, 15 slots, dual PS Modular frame controller (required for control)
MMA10G-SFP-1G: SFP+ 1GE MMA10G-SFP-TR85: SFP+, 10GE, 850nm, MMF, 50/125, LC/LC MMA10G-SFP-TR13: SFP+, 10GE, 1310nm, SMF, 9/125,LC/LC, 10Km
MMA10G Series | Network Based AV Distribution
Rev. 2
