Transcript
MMM-1
MXLV Microphone Master Module ENGINEER AND ARCHITECT SPECIFICATIONS l
Dynamic Microphone with Push-To-Talk Button
l
Retractable Coil Cord
l
Fully Supervised
l
Adjustable Pre-announce Tone
l
Ready-To-Page LED
l
l l
Local Speaker with Volume Control Recording Output (on TBM-2) Listed, ULC Listed, FM, NYMEA, CSFM, City of Chicago Approved
Description
Engineer and Architect Speci Speci fications
The MMM-1 is an MXLV module which provides a supervised high quality dynamic microphone for the purpose of making live voice announcements. The MMM-1 mounts next to the MKB-2 display/keyboard in the front of the MXLV command console. It includes a microphone with push-to-talk button and retractable coil cord. The microphone, push-to-talk button and coil cord are fully supervised.
The emergency voice alarm system shall include a microphone for the purpose of making live voice announcements. The microphone master module shall mount in the front of the command console and provide a high quality dynamic microphone with push-to-talk button and retractable coil cord. The microphone, push-to-talk button and coil cord shall all be electrically supervised.
The MMM-1 also supplies a ready to page LED which indicates that all selected zones are ready to be paged and that the optional pre-announce tone has expired. The pre-announce tone is a 900Hz signal which is adjustable from 0 to 10 seconds duration in 1 second increments. A local speaker with volume control allows the monitoring of the audio channels.
The module shall also include a ready to page LED which shall indicate that all selected zones are ready to be paged and the optional pre-announce tone has expired. The preannounce tone shall be a 900Hz tone, adjustable from 0 to 10 seconds duration in 1 second increments. A local speaker with volume control shall allow the monitoring of all audio channels.
CATALOG NUMBER
5025
Ordering Information Model MMM-1
Description
Part Number
Microphone Master
500-892079
Installation Instructions
315-092098
Mounting Diagram
Connecting the Cable to the ACM-1
MMM-1 MKB-2
MMM-1
ACM-1
FIGURE 2
FIGURE 1 Mounting the MMM-1 on the MKB-2 Panel
NOTICE: The use of other than Cerberus Pyrotronics detectors and bases with Cerberus Pyrotronics equipment will be considered a misapplication of Cerberus Pyrotronics equipment and as such void all warranties either expressed or implied with regards to loss, damage, liabilities and/or service problems. Cerberus Pyrotronics 8 Ridgedale Avenue Cedar Knolls, NJ 07927 Tel: (201) 267-1300 FAX: (201) 397-7008 Website: www.cerbpyro.com
4/97 5M CPY-IG Printed in U.S.A.
Cerberus Pyrotronics 50 East Pearce Street Richmond Hill, Ontario L4B, 1B7 CN Tel: (905) 764-8384 FAX: (905) 731-9182
April 1997 Supersedes sheet dated 8/94
