Transcript
Mobile Mixer Stand
instruction sheet
#357006
ASSEMBLY INSTRUCTIONS CAUTION insPect contents iMMeDiAteLY AnD FiLe cLAiM With DeLiVerinG cArrier For AnY DAMAGe. SAVE YOUR BOX AND ALL PACKING MATERIALS. You Are resPonsiBLe For DAMAGe to Your unit iF returneD iMProPerLY PAcKeD.
Parts List #11
#
#1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17
#1 #2 #3 #4
#7 #6 #5
#11
#9
#12
qty
..1 ..2 ..1 ..4 ..2 ..2 ..2 ..2 ..1 ..2 ..6 ..4 ..4 ..4 ..4 ..4 ..4
part
description
. . . 330126. . . . table top . . . 348345. . . . Leg channel . . . 315463. . . . tray slide rack . . . 315461. . . . Leg . . . 300699. . . . caster . . . 300698. . . . caster with Brake . . . 317646. . . . Front Fitting . . . 317647. . . . corner Fitting . . . 317663. . . . side-to-side crossbrace . . . 317643. . . . Front-to-back crossbrace . . . 300794. . . . #8 x 1⁄2˝ screw . . . 377798. . . . 3⁄8 - 16 x 1⁄2˝ hex cap screw . . . 305010. . . . Flat Washer . . . 306122. . . . Lock Washer . . . 306137. . . . cap nut . . . 300962. . . . 1⁄2 - 13 x 11⁄2˝ Bolt . . . 311243 . . . . 5⁄16 - 24 set screw
#10
#8
#13
#14
#15
#16
#17
(actual size of hardware)
(continued on page 2)
eG10021
revised 10/12
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com • Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100 • Fax: 302/653-2065 eagle Foodservice equipment, eagle Mhc, specFAB®, and retail Display are divisions of eagle Group. ©2012 by the eagle Group
Mobile Mixer Stand ASSEMBLY INSTRUCTIONS Step 1 - Assemble rack (Item #3) and set aside. Item #13 #305010 flat washer
Item #14 #306122 lock washer
Item #15 #306137 cap nut Item #12 #377798 bolt
Item #16 #300962 bolt
Step 3 - Slide legs through crossbrace subassembly and snug set screws.
Step 2 - Assemble crossbrace subassembly. Item #8 corner fitting Item #10 crossbrace
Item #9 crossbrace
Item #8 corner fitting
Item #10 crossbrace Item #7 front fitting
Item #4 leg
Item #7 front fitting
Loosen set screws in casting pieces, insert crossbrace, and secure with 5/32˝ allen wrench.
crossbrace subassembly
Item #17 #331243 set screw
Loosen set screws in casting pieces, insert legs, and secure with 5/32˝ allen wrench.
(continued on page 3)
Page 2
Mobile Mixer Stand ASSEMBLY INSTRUCTIONS Step 4 - Attach tabletop. • Turn tabletop upside-down, taking care not to scratch the surface. • Insert legs into gussets. • Tighten all screws. Note: Open end of crossbrace faces the front of the table.
tabletop (upside-down)
Secure legs into gussets with Item #17 #311243 set screws provided, using 5/32˝ allen wrench.
Step 5 - Turn rack assembly (from Step 1) upside-down and attach to tabletop channel frame.
rack assembly (upside-down)
tabletop channel frame Item #11 #300794 screw
(continued on back page)
Page 3
Mobile Mixer Stand ASSEMBLY INSTRUCTIONS
Step 6 - Attach casters to assembly. Tighten knurled nut until applicator starts to expand. Insert caster into leg. If caster is not snug, tighten knurled nut more.
knurled nut
When caster is snug in leg, use a 2˝ wrench to tighten bottom nut.
bottom nut
(End) Fully assembled unit.
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com • Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100 • Fax: 302/653-2065 eagle Foodservice equipment, eagle Mhc, specFAB®, and retail Display are divisions of eagle Group. ©2012 by the eagle Group
