Preview only show first 10 pages with watermark. For full document please download

Mobile Radio Universal Adapters Interface For Mobile Two Way Radios

   EMBED


Share

Transcript

Mobile Radio Universal Adapters Interface for Mobile Two Way Radios C6001 / 40447G-04 Product Bulletin FE ATURE S A ND BE NE FIT S Positive Action Push-to-Talk Switch (Momentary) 6 Pin Screw-on Connector prevents unintentional disconnect Listen Level Control, detented Sturdy Belt Clip Rugged RFI Shielded Coil Cord - 15’ extended TE CH NIC AL DATA C6001 Belt Station Adapter H6000 Series Headset + C6001 Adapter + Connector Kit + Wire + Radio D ES CRI P TI O N The Model C6001 Utility Radio Adapter provides interface between any David Clark Series 6000 Noise Attenuating Headset and a mobile radio system. The Model C6001 is compatible with most mobile radios. It is not compatible with radios that provide less than 5VDC bias on the microphone audio line. The adapter is generally attached to the wearer’s belt but can be used in any convenient location. Select a location that allows freedom of movement while providing access to the PTT switch. The C6001 requires a technician to wire a cable to the back of the radio at it’s accessories connector. The other end of the wire connects to a panel mount connector. Mounting and wiring information is on page two of this document. Each individual radio has it’s own set up for the accessories connector and this information can be obtained from the radio’s service and/or operator manual(s). The C6001 then plugs into the panel mount connector. In order to properly install this adapter you will need the following parts: 18352G-22 Connector Kit for bulkhead mounting 09271P-13HA000 6 Conductor Shielded Cable (per foot) or equal 13238P-01 Protective cap (Optioal) 360 Franklin Street, Box 15054, Worcester, MA 01615-0054 Tel: 800-298-6235 Email: [email protected] Web site: www.davidclark.com c 2012 David Clark Company Incorporated Technical data subject to change without prior notice. Current data available at www.davidclark.com Fax: 508-753-5827 Made in USA 19520P-79(5/12) TE CH NIC AL DATA 360 Franklin Street, Box 15054, Worcester, MA 01615-0054 Tel: 800-298-6235 Email: [email protected] Web site: www.davidclark.com c 2012 David Clark Company Incorporated Technical data subject to change without prior notice. Current data available at www.davidclark.com Fax: 508-753-5827 Made in USA 19520P-79(5/12)