Transcript
Security Engineered Machinery Co., Inc
OPERATIONAL & MAINTENANCE MANUAL SEM Model 1125P/CD Shredder REV: 0
Security Engineered Machinery Co., Inc
NATIONWIDE SERVICE Phone Toll Free 1(800)225-9293 Email:
[email protected] Fax: (508)366-6814 Website: WWW.SEMSHRED.com
***IMPORTANT SAFETY PROCEDURES*** Your new paper shredder incorporates powerful, heavy duty cutting mechanisms, serious and permanent injury may result if proper precautions are not followed.
1. This equipment should never be operated by children or individuals that are untrained or incapable of understanding these safety precautions!
2. Do not reach into the feed opening for any reason! Never insert fingers, hands, other extremities, or objects not meant to be shredded into the feed opening!
3. Do not operate or come in close proximity to this equipment wearing long hair, necktie, loose clothing, or jewelry which may activate a photoelectric on/off switch and/or be pulled into the shredder.
4. Maintenance or repair of this equipment should be performed only be trained, authorized service personnel.
5. Always disconnect electrical power (unplug) before removing or opening the cover or other panels providing access to internal mechanisms.
SPECIFICATIONS Shred Size Sheet Capacity Feed Opening Dimensions Weight
1/8” X 1” *Up to 7 Sheets per Pass 8.75” for paper /505” for CD’s, Credit Cards 13.5”H x 8.75”W x 21”D 32 lbs.
*Results may vary depending on power source, operator/proper maintenance and paper type.
For NATIONWIDE SERVICE CALL 1(800)225-9293 2
Table of Contents READ CAREFULLY BEFORE USING Proper care of your new paper shredder will ensure many years of trouble free operation, with minimum of maintenance or repair. IMPORTANT: Please note that all packaging should be retained by the customer for (30) days from the time of receipt. In the event that this unit needs to be sent back for replacement or repair this packaging will be required to do so. Should the packaging have been discarded before the (30) day requested period, packaging costs will be incurred by the customer. Contents Page No. Safety Procedures…………………………………………………………………………………………..2 Table of Contents…………………………………………………………………………………………..3 Safety Precautions………………………………………………………………………………………..4-5 Installation and Set-up………….…………………………………………………………………..............6 Operation and Feeding …………………………………………………………………………….….....7-8 Maintenance and Cleaning…………………………………………………………………………………9 Troubleshooting.…………………………………..…………………………………………………...10-13 Accessories..............……………………………………………………………………………………….14 Technical Information……………………………………………………………………………………..15 Parts Breakdown……………………………………………………………………………………….16-21
Customer Service Security Engineered Machinery Co., Inc. PO Box 1045 5 Walkup Drive Westboro, MA 01581 Tel: 800-225-9293 Fax: 508-366-6814 E-mail:
[email protected] Website: www.semshred.com Order On-line: GSA Customers: Commercial Customers:
www.fedshred.com www.semshred.com
IMPORTANT Two to three preventive maintenance calls per year are recommended Only authorized SEM service personnel should be allowed to service the shredder.
For NATIONWIDE SERVICE CALL 1(800)225-9293 3
SAFETY PRECAUTIONS
Remove the plug before cleaning the machine! Do not perform any repairs on document shredder
Ensure free access to mains.
For NATIONWIDE SERVICE CALL 1(800)225-9293 4
SAFETY PRECAUTIONS Cont…
When not in use for a longer time switch off.
Do not operate the machine without the safety flap (A)
For NATIONWIDE SERVICE CALL 1(800)225-9293 5
INSTALLATION
Place machine onto the shred bin or cabinet
Plug into the wall socket
For NATIONWIDE SERVICE CALL 1(800)225-9293 6
OPERATION
Turn the main switch to position”I”. The green control light will light (1) ready for operation. Starts automatically when paper, CD/DVD or credit cards are inserted (2). Stops automatically when no further paper, CD/DVD or credit cards are inserted.
Stops automatically if too much paper is inserted (Machine Jams)
For NATIONWIDE SERVICE CALL 1(800)225-9293 7
OPERATION Cont…
Press reverse button (1) and remove paper (2). Reset by pressing the rocker switch to position “I” (3). Re-feed the paper in smaller quantities (4). CD/DVD: Should CD/DVD cause a jam when being destroyed, press the reverse button “R”.
Empty the shred bin when it is full. (Level can be seen in the window (A). Remove and empty the shred bin for CD/DVD.
For NATIONWIDE SERVICE CALL 1(800)225-9293 8
MAINTENANCE AND CLEANING
If the sheet capacity reduces or after the shred bin is emptied oil the shredding mechanism (see picture).
From time to time clean the output area of the cutting head. • Disconnect from mains • Remove paper debris with a brush (DANGER OF INJURY)
For NATIONWIDE SERVICE CALL 1(800)225-9293 9
TROUBLESHOOTING Machine will not start.
Is the machine plugged in?
For NATIONWIDE SERVICE CALL 1(800)225-9293 10
TROUBLESHOOTING Cont..
Is machine placed correctly on the shred bin or cabinet? (A) Is shred bin is pushed in?
Is the switch in position ”I”? Green LED lamp lights up? (1) Insert paper (2)
For NATIONWIDE SERVICE CALL 1(800)225-9293 11
TROUBLESHOOTING Cont..
Feed paper into the center of the feed opening? (Photo Cell)
Machine will not stop. Remove plug from main, clean the photo cell (A) with a small brush.
Machine stops. Overload protection. Cooling down period approximately 10-15 minutes.
For NATIONWIDE SERVICE CALL 1(800)225-9293 12
TROUBLESHOOTING Cont.. Empty the shred bins in sufficient time, at least daily, so that no interference is caused to the cutting heads. If a paper jam, as described on page 7 cannot be corrected, because of an over filled shred bin, the shred bin must be emptied.(See page 8)
None of the above mentioned methods helped to solve the problem Contact our Customer Service at 1(800)225-9293
For NATIONWIDE SERVICE CALL 1(800)225-9293 13
RECOMMANDED ACCESSORIES Environmentally Friendly Oil Part #
For NATIONWIDE SERVICE CALL 1(800)225-9293 14
TECHNICAL INFORMATION
This machine is approved by independent safety laboratories and is in compliance with the EC regulations 2006-95-EG and 2004-108-EG. Sound Level Information: The sound level at the work place is less than the ISO 7779 standard’s maximum permissible level of <70 db (A) The exact technical specifications can be found on the technical specifications sticker on the machine. To claim under guarantee, the machine must still carry its original identification label. Subject to alterations without notice.
For NATIONWIDE SERVICE CALL 1(800)225-9293 15
PARTS BREAKDOWN
For NATIONWIDE SERVICE CALL 1(800)225-9293 16
PARTS BREAKDOWN Cont….
For NATIONWIDE SERVICE CALL 1(800)225-9293 17
PARTS BREAKDOWN Cont….
For NATIONWIDE SERVICE CALL 1(800)225-9293 18
PARTS BREAKDOWN Cont….
For NATIONWIDE SERVICE CALL 1(800)225-9293 19
CONNECTING DIAGRAM
For NATIONWIDE SERVICE CALL 1(800)225-9293 20
WIRING DIAGRAM
For NATIONWIDE SERVICE CALL 1(800)225-9293 21
