Transcript
AUTOMATIC GRILL SHUT-OFF 1-HOUR TIMER INSTRUCTIONS Model # 3092A
Rated up to 100,000 BTUs / Max temperature 125°F
Fit the Automatic Grill Shut-Off Timer in the gas supply line before the grill. The timer accommodates 1/2" NPT piping (both ends). Important:
Ensure you connect the gas supply to the side marked “IN” on the timer (see photo). It MUST NOT be fitted within 18" of the grill, or it will overheat, causing damage to the timer and may result in a leak.
Timer setting mark (shown here in OFF) Gas flow direction (to grill)
Use pipe joint compound on male fittings attached to the timer. To use, set the dial (turn clockwise) to the desired time to shut off. The 3 one hour increments (any position The dial dialisismarked markedin in 3 twenty minute increments (any in between is an estimate of that hour). Theset timer dialThe will timer auto position in between is an estimate of that time). rotate and will shut off supply when dial will(counter-clockwise) auto rotate (counter-clockwise) andthe willgas shut off the gas the dialwhen reaches (i.e. the OFF time is completed). supply the OFF dial reaches (i.e. the time is completed). Important:
When using the timer for periods of less than one hour, you must first set the 1 hour twenty minutes, you must firstdial settothe dial (to to activate), then (counter-clockwise) to the 20 minutes (toreturn activate), then return (counterdesired amount time. This will ensure proper clockwise) to theofdesired amount of time. This timer operation. See Fig.operation. 1-1. will ensure proper timer See Fig. 1-1.
Gas supply side
Grill side
Turn past 20 minutes to activate
Fig. 1-1
Time settings: 20-60 minutes
ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746 REV 0- 1508270830
L-C2-485
AUTOMATIC GRILL SHUT-OFF 1-HOUR TIMER INSTRUCTIONS Model # 3092A
Rated up to 100,000 BTUs / Max temperature 125°F
Fit the Automatic Grill Shut-Off Timer in the gas supply line before the grill. The timer accommodates 1/2" NPT piping (both ends). Important:
Ensure you connect the gas supply to the side marked “IN” on the timer (see photo). It MUST NOT be fitted within 18" of the grill, or it will overheat, causing damage to the timer and may result in a leak.
Timer setting mark (shown here in OFF) Gas flow direction (to grill)
Use pipe joint compound on male fittings attached to the timer. To use, set the dial (turn clockwise) to the desired time to shut hour increments (any position off. The The dial dial isismarked markedinin3 one 3 twenty minute increments (any in between is an estimate of that hour). Theset timer dialThe willtimer auto position in between is an estimate of that time). rotate and will shut and off the supply when dial will(counter-clockwise) auto rotate (counter-clockwise) willgas shut off the gas the dialwhen reaches (i.e. the OFF time (i.e. is completed). supply the OFF dial reaches the time is completed). Important:
When using the timer for periods of less than one hour, you must first set the 1 hour twenty minutes, you must firstdial settothe dial (to to activate), then (counter-clockwise) to the 20 minutes (toreturn activate), then return (counterdesired amount time. This will ensure proper clockwise) to theofdesired amount of time. This timer operation. See Fig.operation. 1-1. will ensure proper timer See Fig. 1-1.
Gas supply side
Grill side
Turn past 20 minutes to activate Time settings: 20-60 minutes
Fig. 1-1
ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746 REV 0- 1508270830
L-C2-485
