Transcript
Model 75C3 MULTI-FUNCTION 3U, cPCI I/O CARD Convection Cooled
Features Multiple functions on a single slot 3U cPCI card User can specify three different function modules Control via cPCI Bus and/or Gigabit Ethernet Automatic background BIT testing continually checks and reports the health of each channel Connections via Front Panel, and/or Rear Panel Designed for both Commercial and MIL applications
Conduction Cooled
Conduction or Convection-cooled versions Software Support Kit and Libraries provided
Description
Convection Cooled
The 75C3 is a 3U cPCI multi-function User Signals (Via Front Panel or backplane connectors) I/O and communications card. The motherboard contains three independent module slots, two of which can be Function Function Function populated with a function-specific module Module Module Module and the third with either a combination #3 #1 #2 (KA Combo or REF only) module featuring four multiplexed A/D Module Module Module channels and 28 Discrete I/O channels, resources resources resources or with a reference supply. The enhanced mother-board, using multiple DSPs, enables higher processing power and dedicated control for each module. This Inter Module Bus unique design eliminates the need for multiple, specialized single function cards by providing a single board solution for a broad assortment of I/O, Synchro/ Gigabit Ethernet Resolver, LVDT and other Board Resources signal interface functions that can be PCI Bus controlled either via the cPCI Bus or 10/100/1000Base-T Ethernet. (See available functions on following page.) Additionally, the 75C3 incorporates serial communications modules that support RS232/422/423/485, MIL-STD-1553, CANBus and ARINC 429. Our approach increases packaging density, saves enclosure slots, reduces power consumption and adds continuous background built-in-test (BIT). BIT, a highly beneficial feature, is module specific, always enabled, and continually checks the health of each channel, ensuring optimal system performance. A possible fault is immediately reported and the specific channel is identified, mitigating risk of equipment downtime. Testing is totally transparent to the user, requires no external programming, has no effect on the standard operation of the card and can typically be disabled on a per-channel basis.
75C3 Data Sheet 110 Wilbur Place, Bohemia, NY 11716
Revision A5 Tel: 631.567.1100 / Fax: 631.567.1823
www.naii.com
GENERAL BOARD SPECIFICATION Power: +5VDC
o
o
o
AVAILABLE FUNCTION MODULES A/D Converter
o
●Operating Temp: 0 C to 70 C or -40 C to 85 C
●Size: 100mm x 20mm x 160mm (3U)
Note 1 – Indicates wide selection (See part number in Operations Manual)
Module C1 C2 C3 C4 CA Module F1 F3 F5 J3 J5 J8 Module 61 Module 51 Module K6 (v4) K7 Module D7 Module D8 Module
Channels 10 10 10 10 10 Channels 10 10 4 10 10 4 Channels 3 Channels 3 Channels 16 16 Channels 16 Channels 11 Channels
E7 Module
4 Channels
24 VDC (max) Frequency
32 bit Resolution
L1 Module S1 Module G4 Module G5 Module A4 Module N7, N8 Module P6, PA Module
4 Channels 4 Channels 6 Channels 4 Channels 6 Channels 2 Channels 4 Channels
360 Hz to 20 KHz Frequency 50 Hz to 20 KHz Update rate 16.7 Hz/channel Update rate 2.3 Hz – 2.4 KHz Frequency 100 KHz or 12.5 KHz Operational Modes BC,RT, BM, BM/RT CAN protocol P6=CAN2.0A/B, PA=J1939 Communication
16 bit Resolution 16 bit Resolution 16 bit Resolution 16 bit Input/output RX/TX Onboard RAM 128Kbyte per ch Message Buffer 16K RX/TX Data rate (Sync)
P8 Module V1, V2 Module W1
4 Channels 1, 2 Channels 1
Async / Sync Voltage Output +/- 15V Frequency 47 Hz – 20KHz
4 Mbits/s per ch. Current (max) +/- 450 mA/ch. Accuracy +/- 3%
1 Mbit/s per ch. Regulation +/- 1% Voltage 2 – 115 VRMS
32 KB
A/D & Discrete I/O (Slot 3 only)
Module
A/D Channels
Input Scaling
Resolution
Accuracy
Sampling (programmable)
KA
Reference (slot 3 only)
Module W6 W7
4(multiplexed) I/O Channels 28 Channels 1 1
10 VDC Input Range 0 – 50 VDC Frequency 47 Hz – 20KHz 47 Hz – 2KHz
14 bit Output Range 0 – 50 VDC Accuracy +/- 2% +/- 2%
0.1% FS Programmable Input or Output Voltage 2 – 28 Vrms 115 Vrms
3 KHz max Resolution 12 bit Power 5 VA (max) 5 VA (max)
D/A Converter
D/S DLV Discrete I/O
TTL Differential Transceiver Encoder/Counter LVDT S/D RTD Strain Gage ARINC 429/575 MIL-STD-1553 CANBus RS-232/422/485 DC Power Supply Reference
Input Scaling Resolution Accuracy (±) Sampling (programmable) 1.25,2.5,5 or 10 VDC 16 bit 0.05% FS 200 KHz max 5,10,20 or 40 VDC 16 bit 0.1% FS 200 KHz max 0-25 mA 16 bit 0.1% FS 200 KHz max 6.25,12.5,25 or 50 VDC 16 bit 0.1% FS 200 KHz max (Channels 1-6 are C2 type and Channels 7-10 are C3 type) Output Range Resolution Accuracy (±) Settling time 10 or 0-10 VDC 16 bit 0.05% FS 15s max 5 or 0-5 VDC 16 bit 0.05% FS 10s max 25 or 0-25 VDC 16 bit 0.05% FS 10s max 1.25 or 0-1.25 VDC 16 bit 0.05% FS 10s max 2.5 or 0-2.5 VDC 16 bit 0.05% FS 10s max 20 to 100 VDC 16 bit 0.15% FS 350s max Frequency Resolution Accuracy (±) Power 47 Hz – 10 KHz 16 bit 0.1° 0.25 VA / channel Frequency Resolution Accuracy (±) Power 47 Hz – 10 KHz 16 bit 0.2% FS 0.1 VA / channel Input Range Output Range Programmable Notes 0 – 60 VDC 0 – 60 VDC Input or Output Source/sink; contact/volt sense 0 – 80 VDC 0 – 80 VDC Input or Output Individual Isolated Switch Input Range Output level Programmable 0 – 5.5 V TTL/CMOS Input or Output Input Range (422) Input Range (485) Output Range (422/485) -10V to +10V -7V to +12V -0.25V to +5V Signal Voltage Resolution Operation Modes
PART NUMBER DESIGNATION
SSI or A-Quad-B Encoder, Up/Down Counter Accuracy (±) Interface 0.025% FS 2 or 3,4 wire Accuracy (±) Tracking Rate 1 arc-min 190 RPS Accuracy (±) Interface 0.05% FS 2, 3 or 4 wire Accuracy (±) Interface 0.1% FS Conventional 4-arm bridge Message Buffer 256 word Tx/Rx Coupled N7=Transformer, N8=Direct Data rate (Prog) Notes 1 Mb/s max. Bosch® IP Core Data rate (Async) Tx/Rx Buffer Notes Part modem
Power 6 VA (max)
75C3 – XX XX XX X X X X –XX Slot # 1 2 3
MODULE (SLOT) 1& 2 DEFINITION Enter Module Designation (i.e. C1) for each one of slots 1 & 2. Enter “Z0” if slot is not populated
For detailed specifications & complete part number designation, visit www.naii.com to download Operations Manual.
MODULE (SLOT) 3 DEFINITION SLOT 3 can only accept either Module „KA‟ or On-Board Reference (W6, W7). Enter “Z0” if slot is not to be populated.
MECHANICAL P = Rear (J2) I/O only W= P with Wedgelocks
F = Front Panel (J3 & J4) I/O only (PXI chassis compatible) B = Front Panel (J3 & J4) and Rear (J2) I/O
ENVIRONMENTAL C = 0 TO 70 C E = -40 TO +85 C
For Ordering Information:
K = C with conformal coating H = E with conformal coating
Phone – 631-567-1100 Fax – 631-567-1823
ETHERNET 0 = No Ethernet; 2 = Rear I/O Ethernet Connection
ENCODER OUTPUTS FOR SYNCHRO / RESOLVER MODULES 0 = No Encoder outputs 1 = Encoder outputs included for each specified Syn/Rsl measurement module (slot 3 cannot be populated)
SPECIAL OPTION CODE (or leave blank)
75C3 Data Sheet 110 Wilbur Place, Bohemia, NY 11716
Revision A5 Tel: 631.567.1100 / Fax: 631.567.1823
www.naii.com
