Transcript
Model
FS-HD4301VP
Features 1-CH HD Passive Video & Power Transmitter & Receiver (12V/24V DC/AC)
•Real‐time transmission •No power required •NTSC, PAL & SECAM video format compatible •Transmit power signal up to 656ft(200m) in pairs • Compatible with all HD‐TVI, HD‐CVI & AHD analog camera •HD‐TVI 720P: 300m,1080P: 200m over UTP cat5e/6 •HD‐CVI 720P: 430m,1080P: 210m over UTP cat5e/6 •AHD 720P: 300m,960P: 200m over UTP cat5e/6 •Male BNC with extended 5.9inch(150mm)mini‐coax pigtail •RJ45 Jack for UTP cable •Built‐in TVS (Transient Voltage Suppressor) for surge protection •Wave Filter Design, Anti‐Static Design •Lightning protection design Grade:III •60 dB crosstalk and noise immunity •Exceptional interference rejection •ABS engineering plastic housing
Overview The FS-HD4301VP is a passive (non-amplified) device that allows the transmission of real-time CCTV HD video signal via cost-effective Unshielded Twisted Paired (UTP) cable. Baseband (composite) signals of any type are supported. Used in pairs, the FS-4301VP eliminates costly and bulky coaxial cable. The FS-HD4301VP is compatible with all HD‐TVI, HD‐CVI and AHD analog camera. The superior interference rejection and low emissions of the FS-HD4301VP allow video signals to coexist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. The FS-HD4301VP has built-in surge suppressor to protect video equipment against damaging voltage spikes. Its crosstalk and noise immunity ensure quality video signals.
Applications • Security Monitoring System • Multimedia Network Teaching System • Medical Monitoring Display System • Industrial Automation Control System • Banking, securities, financial information display system • Remote Network Server Monitoring • Department Store Security • Casino Security • Hospitals, Airports and banks • School Campuses
Wire and Cable Recommendations The FS-HD4301VP is recommended to use with Unshielded Twisted Paired (UTP) wiring from 24AWG through 22AWG..Individually shielded pairs should be avoided, as they reduce the operating range of the systems drastically. Multi-pair cable (25-pair or more) with an overall shield are acceptable. Video signals can coexist in the same wire bundle as telephone, datacom, or low-voltages power circuits. While video may be routed through telephone punch-down block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices MUST BE removed from the pair. For more specific information regarding wire types, gauges and proper installation techniques, please contact us for technical assistance. 1
2
3
4
5
6
7
8
T568A:
White Green
Green
White Orange
Blue
White Blue
Orange
White Brown
Brown
T568B:
White Orange
Orange
White Green
Blue
White Blue
Green
White Brown
Brown
Technical Specifications Model
FS-HD4301VP
Product Name
Single Channel HD Passive Video and Power Transmitter & Receiver
Applied Devices
CCTV cameras, monitors, DVR, switchers, IP encoders, and other CCTV equipment
Video Format
PAL, NTSC, SECAM
Operating Frequency Video
Max Distance Common-mode/Differential-mode rejection Impedance
Wire Type
Power Connector
Protection
Mechanical
Environmental
DC to 42MHz
HD‐TVI 720P: 300m,
HD‐CVI 720P: 430m,
AHD 720P: 300m,
HD‐TVI 1080P: 200m
HD‐CVI 1080P: 210m
AHD 960P: 200m
15KHz to 42MHz
60 dB typ
Coax, Male BNC 75Ω unbalanced
UTP,RJ45
100Ω balanced
Attenuation
1.5 dB typ Max
Network Wiring
One Unshielded Twisted Pair (for each video signal) 24-16 AWG (0.5-1.31mm)
Category Type
2 or better
Impedance
100 ± 20 ohms
DC Loop Resistance
52 ohms per 1,000ft (18 ohms per 100m)
Differential Capacitance
19 pF/ft max (62 pF/m max)
Power Input
No external power required
Power transmission
12V/24V,DC/AC, up to 656ft(200m) via UTP cat5e/6
Video input/output
Male BNC connector
Video input/output
RJ45 Jack
Surge Protection
renewable solid state surge protection
Video Input
2KV(common mode), 10/700us IEC6100-4-5/1955(GB/T 1726, 5-1999)
Video Output
2KV(different mode), 10/700us IEC6100-4-5/1955(GB/T 1726, 5-1999)
Housing
ABS engineering plastic
Body Color
Black
Dimensions(L*W*H)
60.4*29*20.4mm (BNC connector & cable excluded)
Net Weight
60g
Operating Temperature
-20º ~ 70º C
Relative Humidity
0~95% (non-condensing)
Storage Temperature
-40º ~ 150º C
Application Diagram
