Transcript
Lavatory Faucets Widespread with CER-TECK® ceramic structures
Model No: 23C634 COMPLIES WITH:
SPECIFICATION:
• CSA certified • Complies to ASME A112.18.1/CSA B125.1 • Verified compliant with 0.25% weighted average Pb content regulations • Verified compliant with 0.25% weighted average Pb content regulations • Indicates compliance to ICC/ANSI A117.1 • Outlet options 2, 3, 4 and 7 are EPA WaterSense listed • (Contact Delta Representative for State and/or Local Approvals)
• Two handle widespread lavatory faucet • 152 to 305mm (6" to 12") adjustable centers • Polished chrome plated finish trim • CAST BRASS bodies 1/2" CAST BRASS spout or 3/8" IPS BRASS PIPE Rigid/Swivel • 4Gooseneck Spout • Metal hold-down package • Color indexed metal handles with vandal resistant screws • CER-TECK® 1/4 turn ceramic structures • Widespread with CER-TECK® ceramic structures R2 - Gooseneck spout-4.5" radius -Standard rigid/swivel field • Spout: installation-Vandal resistant .090" wall thickness(R2) • Outlet#: 3 - Vandal Resistant 1.5 gpm (5.7L/min) Flow Control Aerator 4 - 102 mm (4") Blade Handles- ADA Compliant-Sanitary Hoods• Handle#: Metal-Color indexed-Vandal resistant screws • Heavy Duty Rigid/Swivel Inline (R2) Gooseneck Spout Less Pop-up OPERATION: • Not Available
(Dimensional drawing on following page)
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference. Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced January 09, 2015.
Page 1 of 2
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - (317) 848-1812 Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - (905) 712-3030
- 1.0.19997
Model No: 23C634
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference. Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced January 09, 2015.
Page 2 of 2
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - (317) 848-1812 Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - (905) 712-3030
- 1.0.19997
Widespread Lavatory Faucets 6"-12" Centers Specification: (example)
23C334
• Two handle widespread lavatory faucet • 152 to 305mm (6" to 12") adjustable centers • Polished chrome plated finish trim • CAST BRASS bodies • 4 1/2" CAST BRASS spout or 3/8" IPS BRASS PIPE Rigid/Swivel Gooseneck Spout • Metal hold-down package • Color indexed metal handles with vandal resistant screws • CER-TECK® 1/4 turn ceramic structures and … with … (add product variation required) with … (add outlet required) with … (add handle required) with … (add suffix -LS if required – See Back Page) with … (add suffix -TI if required – See Back Page)
DESCRIPTION
23C644
Engineer/Architect Approval Model Specified: Approval: Date:
PRODUCT NO.
®
Widespread Lavatory Faucet 23C
PRODUCT VARIATION
HANDLE
OUTLET
4
4
4
0
0
0
1
1
1
2
Vandal Resistant 1.5 gpm (5.7 L/min.) Laminar w/Agion® Antimicrobial
2
102mm (4") Hooded Blade Handles (4)
3
Vandal Resistant 1.5 gpm (5.7 L/min.) Flow Control Aerator
3
76mm (3") Hooded Lever Handles (4)
4
4
Standard 1.5 gpm (5.7 L/min.) Flow Control Aerator
4
102mm (4") Blade Handles, Sanitary Hoods (4)
5
5
Vandal Resistant 0.5 gpm (1.9 L/min.) Flow Control Non-Aerating Spray Outlet
5
152mm (6") Wrist Handles, Sanitary Hoods
2 3
6
Cast Spout Less Pop-up (No Pop-up Hole)
Heavy Duty Rigid/Swivel Inline (R2) Gooseneck Spout Less Pop-up (1) (3)
6
6 Smooth End, Laminar Flow Control in Base of Gooseneck Spout 1.0 gpm (3.8 L/min.) (2)
7
7
8
8
8
9
9
9
(1) Available Optional Rigid/Swivel Spouts. These spouts can ONLY be added to BASIC PRODUCT Option No. 6. (2) This outlet can ONLY be added to BASIC PRODUCT Option No. 6. (3) 120º Limited Swing Spout available. Add Suffix -LS. Refer to www.specselect.com for individual models.
7
Flow Rates are at 60 PSI. (4) H & C Temperature Indicator available. Add suffix –TI. Note: Use this page front and back as a product submittal sheet.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
DSP–23C Rev. E DSP–23C Page Rev. 1.C.7 E
Widespread Lavatory Faucets 6"-12" Centers Approvals:
• CSA certified • Complies to ASME A112.18.1/CSA B125.1 • Handles No. 2, 3, 4, and 5 Indicates compliance to ICC/ANSI A117.1 • Outlet options 2, 3, 4 and 7 are EPA WaterSense listed • Verified compliant with 0.25% weighted average Pb content regulations (Contact Delta Representative for State and/or Local Approvals.)
HANDLE TEMPERATURE INDICATORS
FRONT VIEWS
handle temperature indicators “H” (red), “C” (blue). Availaible on handle options 2, 3 or 4 only.
3 73mm (2.9")
76mm (3.0") 53mm (2.1")
89mm (3.5")
102mm (4.0")
4
5
97mm (3.8")
51mm (2.0")
❏ Add suffix “-TI” to Product Number for
96mm (3.77") 102mm (4.0")
2
135mm (5.3") 152mm (6.0")
32mm (1.25") MIN. **3 HOLES
1/2" -14 NPSM
*305mm
27mm (1.06") MAX
152mm (6.0")
118mm (4.7")
(12.0")
* CAN BE CUT IN FIELD TO 152mm (6.0") MINIMUM INLET FOR 3/8" OR 1/2" FLEXIBLE RISER OR 1/2-14 NPSM COUPLING NUT (NOT SUPPLIED)
FLOW RATE vs PRESSURE Outlet Flow Rates
FLOW (L/min.)
FLOW (GPM)
8
2
Outlets #2, 3, 4, 5
7 6
1.5
114mm (4.5")
Outlet #7
C
A
5
A
C
51mm D (2")
D
4
1
3
0
10
20
30
40
50
Line Pressure (psig)
60
70
80
0
Spout Outlets No. 3 & 4 Aerator No. 2 Laminar Flow Outlet No. 5 Low Flow Outlet
OUTLET NO.
2 3 4 5
No. 7 Flow Control
GOOSENECK SPOUT “D”
mm
18 18 17 18
in.
0.69 0.69 0.67 0.69
44mm (1.75")
26mm (1.01")
66mm (2.6")
L
L
10°
.5
2 1 0
CAST SPOUT
GOOSENECK SPOUT #6
2.5 9
44mm (1.75")
26mm (1.01")
44mm (1.75")
**Spout hole 38mm (1.5") maximum diameter.
CAST SPOUT “D”
mm
in.
11 0.45 11 0.45 11 0.45 11 0.45
LIMITED SWING GOOSENECK
FOR OPTIONAL RIGID/SWIVEL & LIMITED SWING SPOUTS See DSP-R/S for detailed specification
❏ Add suffix “- LS” to Product Number
for 120° Limited Swing – Available on #6 Product Variation ONLY
Note: Measurements may vary ± 6mm (0.25") Refer to www.specselect.com for individual models.
Page 1.C.8 DSP–23C Rev. E
DSP–23C Rev. E
GOOSENECK SPOUT ASSEMBLIES SPOUT/OUTLET Gooseneck-Standard (R2) for outlets #2, 3, 4, 5 Gooseneck-Standard (R2) for outlet #7
“A” “C” “L” mm in. mm in. mm in. 114 4.5 104 4.1 170 6.7 114 4.5 97 3.8 178 7.0
Note: Use this page front and back as a product submittal sheet. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
