Transcript
For more information, please visit the product page.
date
11/29/2012
page
1 of 3
MODEL: PJ-068B-SMT │ DESCRIPTION: MID MOUNT DC POWER JACK FEATURES •mid mount for low profile applications •fully shielded •high current rating
SPECIFICATIONS parameter
conditions/description
min
typ
rated input voltage rated input current contact resistance
between terminal and mating plug between terminal in a closed circuit1
insulation resistance
at 500 Vdc
voltage withstand
at 50/60Hz for 1 minute
5
A
50 30
mΩ mΩ MΩ
0.3
terminal strength
any direction for 10 seconds
operating temperature
-25
life
500
Vac
3
kg
500
g
85
°C
5,000
RoHS
units Vdc
100
insertion/withdrawal force
Notes:
max
16
cycles
yes 1. When measured at a current of less than 100 mA / 1 kHz 2. Add suffix “-TR” to the model number for tape & reel packaging
SOLDERABILITY parameter
conditions/description
min
typ
max
units
reflow soldering
see reflow profile
255
260
265
°C
270 260 250 240 217 180 120 120
60 50 °C
70 60
140 120
250 180
240
Time (second)
cui.com
340 300
380 360
430 420
480
For more information, please visit the product page.
CUI Inc │ MODEL: PJ-068B-SMT │ DESCRIPTION: MID MOUNT DC POWER JACK
date 11/29/2012 │ page 2 of 3
MECHANICAL DRAWING units: mm[inches] TOLERANCE: X.X ±0.2mm X.XX ±0.1mm X.XXX ±0.05mm
SHIELD A SHIELD B
MATERIAL
PLATING
terminal 1
brass
silver
terminal 2
copper alloy
silver
terminal 3
brass
silver
stopper
C.R. steel
nickel
shield-A
brass
nickel
shield-B
stainless steel
plastic
PA6T
10.0 0.394 11.8 0.465
4.15 0.163 0.9 0.035 (4 PLCS)
STOPPER
9.1 0.358
2.3 0.091 (4 PLCS) 3.7 0.146
4.55 0.179
1.00 0.039 10.9 0.429
4.25 0.167 0.2
0.75 0.030 (2 PLCS)
4.25 0.167 0.2
5.90 0.232
11.1 0.437
13.8 0.543 9.7 1.00X2.40 (2 PLCS) 1.50X2.90 (2 PLCS) 1.20
1.60 0.063 (2 PLCS)
1.40 0.055
3.05
0.70X1.80 1.20X2.30 2
2 1.90
6.05 12.6 0.496 0.3
13.10
13.1 0.516 0.3
1
12.6 5.4
5.7 5.7 0.224
5.45 0.215
1.40
1
3
3
4.35 PCB EDGE
1.00 0.039
PCB LAYOUT TOP VIEW
3.05 (2 PLCS) 9.9 10.9 12.6
R0.5 (2 PLCS) 1.20X1.90 0.70X1.40
1 3 2
Schematic MATING PLUG Jack Insertion Depth: 8.2 mm
cui.com
Model
Center Pin
PJ-068B-SMT
ø2.5 mm
For more information, please visit the product page.
CUI Inc │ MODEL: PJ-068B-SMT │ DESCRIPTION: MID MOUNT DC POWER JACK
date 11/29/2012 │ page 3 of 3
REVISION HISTORY rev.
description
date
1.0
initial release
05/04/2011
1.01
updated spec, added jack insertion depth
10/23/2012
1.02
added TR package option
11/29/2012
The revision history provided is for informational purposes only and is believed to be accurate.
Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899
Fax 503.612.2383 cui.com
[email protected]
CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Mouser Electronics Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
CUI Inc.: PJ-068B-SMT-TR
