Transcript
MODEL T250-F16 16 Gauge Straight Finish Nailer
P
P
IMPORTANT! DO NOT DESTROY It is the customer’s responsibility to have all operators and service personnel read and understand this manual.
OPERATING MANUAL AND SCHEMATIC
PARTS LEGEND 1 2 3 4 5 6 7 8 * 9 10 11 * 12 * 13 * 14 * 15 16 17 18 * 19 20 *21 * 22 23 24 * 25 * 26 * 27 * 28 29 30 31 32 * 33 34 35 36 37 38 39 40 41 42
43 44 45 ** 46 *47 48 49 50 51 52 53 54 55 56 57 58 60 61 62 63 64 * 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86
T.H.S.C.S. 1/4-20 x 1/2 Cap Diffuser S.H.C.S. 1/4-20 x 1 Jam Nut Cap Conical Spring Retaining Ring Upper Valve Piston O-Ring, Main Valve Assembly Seal, Main Valve Lower Valve Piston O-Ring, Main Valve O-Ring, Main Valve O-Ring, Main Valve O-Ring,Valve Post, End Plug Post Main Valve S.H.C.S. 10-24 x 1/2 Piston O-Ring, Piston Washer Driver Blade Seal, Sleeve Flange, Sleeve Sleeve O Ring, Sleeve O Ring, Sleeve O-Ring, Sleeve Gasket, Cap Logo, Housing L Housing Logo, Housing R Gasket, Nose Flange Bumper Seal, Driver Blade Flange S.H.C.S. 1/4-20 x 7/8 Hardened Washer Spring S.H.C.S. 10-32 X 5/16 Front Guide Latch Assembly Rail Bracket Assembly Spring, Front Guide Latch
403812 004238 004224 500458 500772 501143 500766 071297 500840 404180 404698 402730 403592 403591 501023 080326 500963 500955 092037 097748 097746 092174 026133 401958 402668 501008 501010 501009 402669 500972 403713 500968 009397 501142 091536 403711 094295 403710 403708 403715 501139 500973 501039
Flat Washer Lock Washer S.H.C.S. - 10-32 x 3/8 Warning Label Spring, W.C.E. Intermediate W.C.E. Guide Block Roll Pin 1/8 x 1-1/8 W.C.E. Assembly Probe Tip Roll Pin Assembly Pivot Pin, front Guide Front Guide Back Plate Grip Handle S.H.C.S. 10-32 x 1 End Plug Belt Hook Lock Nut 10-32 Spring, Valve Pin Valve Pin O-Ring, Valve Body Roll Pin, 1/8 x 1 Valve Body Retaining Washer Lever, Bump Trigger Bump Trigger Roll Pin Pin, Trigger Rail Cover Assembly Retaining Ring Rail Assembly S.H.C.S. 10-24 x 1/2 Nameplate Spring, Follower Latch Pin Latch Pin, Follower O-Ring Roller, Negator Negator Assembly Follower Assembly Follower Tab Wear Strip Sequential Trigger
WEAR EYE AND HEARING PROTECTION
AIR CONSUMPTION CHART
Always wear hearing protection and eye protection devices, including side shields when operating or working in the vicinity of a tool.
.050
.045
DO NOT EXCEED MAXIMUM RECOMMENDED AIR PRESSURE
.040
60
0
120
.040
.035
60
70
80 90 100 110 AIR PRESSURE - PSIG
Operate the tool using only the recommended air pressure. Do not exceed the maximum air pressure marked on the tool. Be sure the air pressure gauge is operating properly and check it at least twice a day.
120
.030
2 2 2 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 4 1 1 1 2 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 2 1
SAFETY INSTRUCTIONS
0
▲ ➔
1 1 6 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 1 1 3 1 1 1
Denotes Normal Wear Items. Make sure Warning Label (500458) is properly affixed. Replace if necessary. Label available at no charge through the Service Parts Dept. Apply Loctite 242 (Blue) Part No. 093500. Denotes New Change
AIR CONSUMPTION - SCFM/FASTENER
* **
501043 500956 501299 403582 500958 402717 404230 404122 091537 404054 404056 090927 092775 092773 404256 500954 015660 501169 405430 404274 403594 402725 405243 500952 402728 091966 500369 500975 501140 500957 501141 402708 500950 403705 402706 091545 402629 405076 403716 403712 501133 401988
T250-F16, 500970
Never use any bottled air or gases such as oxygen to operate the tool since they could cause the tool to explode.
120
6
T250-F16
1 22
2
23
3
24
26 Cap Assembly #500974
500970
25
5
27 57 6
3
28 58 29
Main Valve Assembly #404188
7
62 63 64 65
8 30
9 10
86
31
32
11
68
35 41
38
17 Piston Assembly #501583
70
71
18
19
39 20
Bump Trigger Assembly #501048
36
37 4
69
34
16
15
OPTIONAL:
72
33
14
51
61
66
67
12 13
60
15
21
40
42 43 46
44 45
47
73 85
74 80
75
49 39
78
50
48
76
54
51 53
56
55 52 7
77
79
81 82 83 84
ACCESSORIES Back Plate Insert This insert accommodates 1 1/4" and shorter finish nails. Also prevents nails from tumbling and jamming.
Part No. 1X1210
Lubricants and Loctite Loctite 242 (Blue) Lubricating Oil 16 oz. Lubricaing Oil with Anitfreeze 8 oz. Chemplex 710 Lubricant 1lb.
Part No. Part No. Part No. Part No.
242 Removable
NSF
P/N: 24221
CAUTION: CAUTION: MAY MAY CAUSE CAUSE ALLERGIC ALLERGIC SKIN SKIN REACTION. EYE EYE IRRITANT. IRRITANT. REACTION. Read back back panel. panel. Read
NET NET .34 .34 FL. FL. OZ. OZ. (10 (10 ml) ml)
093500 403720 219090 403734
Degreaser Cleaner Ideal cleaner for all Paslode tools.
For Impulse & Pneumatic Tools ®
Part No. 219086
NET CONTENT: 12 FL ID OUNCES (340 Grams) U CONTEN IDO NETO: 12 ONZAS LIQUÍDAS (340 Gramos)
DANGER: E XT R E M NTENTS U NDER PRELY FLAMMABLE, VAPOR HARMFUL, CAOCK PANEL E S S U R E , S E E O T H E R C A U TIO N S O N B ¡PELIGRO! EX T R E M AD A M E N TE O CIV O, C O N T E NID O B AJ O PR ESIÓN, VER OTIRNAFLAMABLE, VAPOERS ENN EL PANEL AL DORSO S P R E C A U CIO N
Safety Glasses Clear Tinted
Part No. 402510 Part No. 402512
Tool Case Handy carrying case that conveniently stores your tool with room for additional accessories.
Part No. 501152
3-Strip Capacity Magazine Assembly Offers the flexibility to increase the tool’s magazine capacity to 150 nails.
Part No. 219271
➔ 1/4” Swivel Air Fitting
PRINTED IN U.S.A. © 2005, Illinois Tool Works, Inc.
Part No. 501506
P An Illinois Tool Works Company 888 Forest Edge Drive Vernon Hills, Illinois 60061-3105
405646-8 11/05
