Transcript
Bulletin 11, Issue 3
Export: 2/08/2012
STAFF GAUGE PLATES
MODELS GPF, GPR, GPFN & GPRN
INTRODUCTION Staff Gauge Plates are primarily used to measure the depth of streams or rivers. They are made from aluminium, stove baked enamel, screen printed legend, in 1 metre lengths by 130mm wide, to Australian Standard markings.
SPECIFICATIONS Material: Baked aluminium Dimensions: 1000 x 130 mm Weight: 0.2 Kg Gauge plates are available as follows:
Staff Gauge with metre numbers
Model GPF, Flat, without metre numbers, part number GPF (Note: 5 pairs of 10 mm diameter holes are provided for fixing plate to backing board).
Model GPFN, Flat, with numbered metres, part number GPFN (Note: 5 pairs of 10 mm diameter holes are provided for fixing plate to backing board).
Model GPR, Half round (for clamping on 80mm pipe or pole), without metre numbers, c/w 3 clamps.
Model GPRN, Half round (for clamping on 80mm pipe or pole), with numbered metres, c/w 3 clamps.
Note:
Reverse numbered and different colours staff gauge plates are available on request.
Address: 48-50 Scrivener Street Liverpool, NSW, 2170, Australia
Designed & Manufactured By Hydrological Services Pty Ltd
Ph. 61 2 9601 2022
Fax. 61 2 9602 6971
Web: www.hydrologicalservices.com Email:
[email protected]
Staff Gauge without metre numbers
Distributed By:
