Transcript
QUA
TY AND
R UA
AN
TEE
D
PER
G
LI
F
mono•mounts O
RMANCE
®
best for single panel installations www.pizazzsystems.com
install your panels • easily • quickly • securely
Pizazz monomounts are available from:
www.pizazzsystems.com
ALUMINIUM RANGE
.49”
.62”
.74”
Small
Medium
Large
31.55mm
.99”
1.24”
XL
XXL
1.38”
.28” 1.18”
35mm
7mm .24”
30mm
25.20mm
Bright Gold Brass Bright Gold
Brass Satin Gold
Brass Satin Black
extra spacers (D Parts) are available in gloss clear resin in Small, Medium and Large sizes
Brass Bright Chrome
Gloss clear resin A Parts with the E Part options below in Small, Medium, Large and XL sizes
Brass Satin Chrome
HYBRID RANGE
Satin Gold
extra spacers (D Parts) are available in the following colours in all sizes
Satin Black
Satin Chrome
Bright Chrome
Available with the finishes and colours below in Small, Medium, Large, XL and XXL sizes
Aluminium Natural
BRASS RANGE
6mm
8mm
18.85mm
.98”
.20”
15.68mm
12.50mm
25mm
5mm .16”
.79”
4mm
.59”
A Part
15mm
E Part
20mm
extra spacers (D Parts) are available in all sizes D Part dimensions are the same as A Part dimensions
D
.31”
Available with a Natural finish in the following sizes
XL have a Large A Part and an XL E Part.
Black
Clear
White
SA colours are also available and can be seen at www.pizazzsystems.com
Green
Grey
extra spacers (D Parts) are available in the following colours in Small, Medium and Large sizes
Yellow
PT colours - available with a Gloss or Matt finish in Small, Medium and Large sizes
Red
RESIN RANGE
Nickel
extra spacers (D Parts) are available in the following colours in Small, Medium and Large sizes
Silver
Standard colours - available with a Gloss or Matt finish in Small, Medium and Large sizes
Blue
RESIN RANGE
QUA
LI
AR
AN
TEE
D
PER
GU
TY AND
F
mono•mounts O
RMANCE
®
install your panels I easily I quickly I securely
Are A
STANDARD PARTS
+
E Parts which are sold as a set. Optional extra D Parts are sold separately
The internal back wall of A Parts are designed to accommodate the head of an 8 or 9 gauge countersunk screw or bolt.
E Parts screw into A or D Parts.
D Parts screw between A + E Parts.
O P T I O N A L PA N E L
Recommended hole size 11mm = .43”
A
D
E
D
Thread diameter: 9.75mm = .38”
Important: Use approved wall anchors when required.
Thread diameter: 9.75mm = .38”
extra spacers (D Parts) are used to hold more panels and/or increase the standoff distance.
For part sizes, panel thickness and weight capacities, visit www.pizazzsystems.com
Are secured between A + E Parts
SINGLE PANELS
1
monomounts hold panels between A + E Parts
A
E
1 Single panel
Panels are secured between A + D Parts and D + E Parts
MULTIPLE LAYERS Using extra spacers (D Parts) give you more creative options including:
2
• multiple panel layers with different colours and textures
A
1
D
• offsetting some layers
E
1 Front panel 2 Extra panel
• D Parts can also be used to increase the standoff distance
SALES TOOLS
Are available, including the monomount + multimount Display Pack below
Display Pack Bag
Side One
Side Two
For graphic displays, see our patented three part multimount standoff system at: www.pizazzsystems.com Pizazz and monomount are registered trademarks of Pizazz International Limited. © 2015
Application Examples
www.pizazzsystems.com