Transcript
Most Advanced PICMG SBC Based on Dual Intel® Pentium® III Processors with Intel Graphics and Ethernet Solutions (RIMM memory Supported)
Support Socket 370 Dual Pentium® III processor up to 800MHz or 1GHz ◆ Support two channel RDRAM memory up to 2GB ◆ Support C&T 69000 chip ◆ On board Intel 82559 10/100 base-T Ethernet ◆ Support Ultra DMA/33/66 IDE mode ◆ Fully compliant with PCI Bus spec V2.2 ◆ Full-sized all-in-one SBC with PICMG 2.0 compliant ◆ Reserve space around IDE interface connector to fit DOM (Disk-On-Module) ◆ Fully support ATX function with WOL, Modem-Ring On, K/B & Mouse wake-up ◆ ISA64 driving capability ◆
World's First Fully Integrated SBC with AGP Display, 10/100 Base-T Ethernet and Ultra-160 SCSI Functions
Support Socket 370 type Intel® Pentium III or Celeron™ processors with Bus clock up to 133 MHz ◆ Support up to 512MB (max.) of SDRAM ◆ Intel 82559 10/100 Base-T Ethernet ◆ Adaptec 7892 Ultra-160 SCSI on board ◆ Support 2D/3D graphics display ◆ Support Ultra DMA33/66 IDE mode ◆ Fully PCI Bus spec V2.2 compliant ◆ Full-sized all-in-one SBC with PICMG 2.0 compliant ◆ eserve space around IDE interface connector to fit DOM (Disk-On-Module) ◆ Fully support ATX function with WOL, Modem-Ring On, K/B & Mouse wake-up ◆ Support 4MB Video display cache memory ◆ ISA64 driving capability ◆
* All brand names and trademarks are the properties of their respective owners.
* Specifications are subject to change without notice.
World's First PICMG Dual-processor AIO SBC, Based on the Pentium® III Xeon™ Processor Support 100MHz FSB Slot 2 Pentium® III Xeon™ processors up to 500MHz ◆ Adopt specially designed CPU braces to make the board more rugged ◆ Intel® 440GX AGPset supports up to 2GB SDRAM with 100MHz memory bus ◆ ECC (Error Checking & Correction) & DIMM SPD (Serial Presence Detect) ◆ One DiskOnChip socket for booting Windows NT directly ◆ System monitoring and protection support ◆ Support three VRM 8.3 to have the best stability ◆
"Intel Applied Computing Platform Provider" is a marketing program from Intel. Please visit the following web site for detail:
http://developer.intel.com/platforms/applied/acpp/providers.htm
Advanced PICMG SBC with On-board AGP VGA, Based on the Dual Socket 370 Processor
Advanced PICMG Dual-processor SBC with ISA64, Based on the Intel®Pentium® III Processor
Support dual Socket 370 Celeron™ processors to FC-370 with bus clock up to 100MHz ◆ Support 1GB Max. SDRAM with ECC function ◆ Full-sized AIO SBC with PICMG 2.0 compliance ◆ Fully compliant with PCI Bus spec. V2.1 ◆ PC'98 & Year 2000 compliant ◆ ISA64 driving capability ◆ One bulit-in DOC socket for flash memory disk
Support dual Slot 1 processors with bus clock up to 100MHz ◆ Support 1GB Max. SDRAM with ECC function ◆ Full-sized AIO SBC with PICMG 2.0 compliance ◆ Fully compliant with PCI Bus spec. V2.1 ◆ PC'98 & Year 2000 compliant ◆ ISA64 driving capability ◆ Adopt special SBC holding architecture and thermal solution to make the board more rugged ◆ Support DOC, DOM and ATX function
◆
◆
Advanced PICMG SBC with on-Board AGP VGA, Based on the Pentium® III Processor
Supports single Slot 1 processors with bus clock up to 100MHz ◆ Support up to 512MB Max. SDRAM with ECC memory support ◆ Full-sized AIO SBC with PICMG 2.0 compliance ◆ Fully compliant with PCI Bus spec. V2.1 ◆ PC'98 & Year 2000 compliant ◆ ISA64 driving capability ◆ Support AGP VGA/Panel display up to 4MB VRAM ◆
High-integrated AIO SBC, Based on the Intel ® Pentium® III or Celeron™ Processor Intel® 440BX AGPset supports 66/100MHz FSB for Socket 370 type Pentium ® III processors up to 800MHz ◆ Support Celeron™ processors up to 600MHz ◆ On-board AGP VGA with 2MB VRAM inside and 10/100 Base-T Ethernet ◆ On-board 4 DIMM sockets support up to 1GB of system memory ◆ PC'98, PICMG 2.0 and PCI V2.1 industrial standard compliant ◆ One DOC socket supports up to 144MB flash memory disk ◆ Adopt DS1687 RTC to support real Y2K compliance ◆ System monitoring and protection ◆
Full Function SBC with Ultra 2 wide SCSI, AGP VGA/100 BaseT Ethernet, Based on the Pentium ® III Processor
Real Rugged SBC with Flash Disk Bank, Based on the Pentium® III Processor
◆
Intel® Pentium III processors (Solt 1) up to 700MHz Intel® 440BX AGPset supports up to 1GB SDRAM with 100MHz memory bus and ECC function ◆ Adopts flush mounted Slot 1 processor architecture ◆ ATI Rage Pro AGP display with 4MB/8MB VRAM ◆ Intel 82558 10/100 Base-T Ethernet ◆ Adaptec 7890 Ultra 2 wide SCSI, fastest disk I/O for 80MB/S ◆ Supports system monitoring & protection, ATX power control and Real H/W Y2K compliant RTC
◆
◆
◆
Intel® Pentium III processors (Slot 1) up to 700MHz Intel® 440BX AGPset supports up to 512MB of SDRAM with 100MHz memory bus and ECC function ◆ Adopt flush mounted Slot 1 CPU processors ◆ Reserve three DiskOnChip sockets to form a flash disk bank ◆ Support Real H/W Y2K compliant RTC ◆ Support ISA high driving capability and ATX power control
Best Cost/Performance S-370 Type PICMG SBC
Intel® 440BX AGPset supports 66/100MHz FSB for Socket 370 FC-PGA Celeron™ or Pentium® III processors up to 800MHz ◆Support up to 1GB Max.registered SDRAM with ECC function ◆One DOC socket supports up to 144MB flash memory disk ◆PC/104 connector and high ISA-bus driving capability ◆Support C&T 69000 PCI VGA display with optional panel solution ◆Support system overheat protection, Real H/W Y2K compliant RTC and ATX power control ◆
Ultra Slim 19" 1U Height Rack-mount Chassis
AIO drive set can hold notebook type CD-ROM, FDD and HDD drives Detachable backplane holder for easy installation ◆ One touch-free reset switch and ON/OFF switch inside the front door for secure access ◆ Five 4cm ball-bearing cooling fans for better ventilation ◆ One slot available, either ISA or PCI ◆ Adopt 150W slim type power supply ◆ Dimension: 483(W) x 431(D) x 44(H) mm
◆
◆
Super Compact 19" 2U Height Rack-mount Chassis
1x5.25"+1x3.5" FDD+1x3.5" HDD drive bays Dual 8cm ball-bearing cooling fans for better ventilation ◆ One touch-free reset switch and ON/OFF switch inside the front panel for secure access ◆ 4 PCI slots for expansion ◆ 250W PS/2 redundant PSU installable ◆ Dimension: 482.6(W) x 430.6(D) x 88(H) mm ◆
◆
19" 4U Height Rack-mount Chassis with 9 Drive Bays
19" 4U Industrial Rack-mount PC Chassis for 12 Full-lengthed Cards
19" rack-mount chassis meets EIA RS-310C industrial standard ◆ Rugged construction and design for harsh industrial environment ◆ Nine 5.25" drive bays for RAID & CD-ROM ◆ Three 12cm ball-bearing cooling fans for better ventilation ◆ Modularized PSU back panel ◆ Special design for 14 full-lengthed cards ◆ Dimension: 482(W) x 638(D) x 177(H) mm ◆
3x5.25"+1x3.5" FDD +1x3.5" HDD drive bays Power switch protection offered inside the panel cover to prevent accidental reset or system shut-down ◆ Adopt 330W AT type PSU & PICMG 14-slot backplane ◆ Two 12cm ball-bearing fans provide a better ventilation to the system ◆ 12 full-length card can be installed ◆ Compatible with standard Dialogic voice/fax/modem card ◆ Dimension: 482.6(W) x510(D) x 177(H) mm ◆
◆
19" 4U Height Rack-mount CTI Chassis with 6 Drive Bays
Six 5.25" drive bays for RAID & CD-ROM Three 12cm ball-bearing cooling fans for better ventilation ◆ Traditional rack-mount handles ◆ Modularized back panel for 20-slot Backplane ◆ Front access redundant PSU installed ◆ PS/2 type redundant PSU applicable ◆ Dimension: 482(W) x 638(D) x177(H) mm ◆
◆
19" 5U Height Rack-mount CTI Chassis with 10 Drive Bays
8x5.25"+1x3.5" (or 1xNB CD-ROM+1xNB FDD) drive bays for RAID ◆ Detachable card cage for easy installation ◆ Three hot-swap cooling fans for easy replacement ◆ Modularized function panel for single, dual & quad systems ◆ Adopt PICMG 20-slot backplane ◆ Equipped with 800W (600W+200W) redundant ATX PSU ◆ Dimension: 483(W) x 673(D) x 220(H) mm ◆
19" 2U Height Rack-mount Keyboard Drawer with 12.1" TFT Display
Smart and compact design for rack-mount application 2U (3.5") height to save space ◆ Equipped with 101-key keyboard and touch pad ◆ Support VGA connector for rack-mount PC ◆ Built-in 12.1" TFT display ◆ Dimension: 482(W) x 447(D) x 88.9(H) mm ◆
◆
Ultra Slim 19" 1U Height Rack-mount Chassis
Super Compact 19" 2U Height Chassis
Ultra™ AXe
19" rack-mount chassis meets EIA RS-310C industrial standard Dual cooling fans generate positive air for better ventilation ◆ Easily-installed drive bracket with shock-resistant cushion and well-conductive rubber ◆ Special design for SPARCengine™ Ultra™ AXe processor board ◆ Reserve 2 PCI slot for expansion ◆ Dimension: 482(W) x 610(D) x 44(H) mm ◆
◆
The Most Cost-effective 19" 4U Height Rackmount Chassis
Ultra™ AXi
19" rack-mount chassis meets EIA RS-310C industrial standard 1x5.25"+1x3.5" FDD+1x3.5" HDD drive bays ◆ Dual 8cm ball-bearing cooling fans for better ventilation ◆ One touch-free reset switch inside the front panel ◆ Adopt Micro-ATX type 150W PSU ◆ Special design for SPARCengine™ Ultra™ AXi processor board ◆ Reserve 2 master PCI slots for expansion ◆ Dimension: 482.6(W) x 430.6(D) x 88(H) mm ◆
◆
19" 5U Height Rack-mount CTI Chassis with 6 Drive Bays
Ultra™ AXi
19" rack-mount chassis meets EIA RS-310C industrial standard ◆ Power On/Off switch with light indicator and a reset switch inside the lockable door ◆ Dual cooling fans generate positive air for better ventilation ◆ Easily-installed drive bracket with shock-resistant cushion and well-conductive rubber ◆ Special design for SPARCengine™ Ultra™ AXi processor board ◆ Dimension: 482(W) x 450.8(D) x 177(H) mm
19" 5U Height Rack-mount CTI Chassis with 10 Drive Bays
Ultra™ AXdp
Ultra™ AXmp
◆
4x5.25"+1x3.5" (or 1xNB CD-ROM+1xNB FDD) drive bays for RAID ◆ Dual 12cm hot-swap ball-bearing cooling fans for better ventilation ◆ One touch-free reset switch and one ON/OFF switch protection cap for secure access ◆ PS/2 redundant PSU installable ◆ Special design for SPARCengine™ Ultra™ AXdp processor board ◆ Dimension: 482.6(W) x 495.3(D) x 221(H) mm
◆
19" 4U Industrial Rackmount PC Chassis for ATX M/B
Adopt modularized function panel for easy installation of multiple systems & redundant PSUs ◆ Power switch protection offered inside the panel cover to prevent accidental reset ◆ Two adjustable positions card retainer allow fitting of multiple types of cards ◆ Two 12cm ball-bearing fans provide a better ventilation to the system ◆ Modularized back panel for easy change of different type ATX M/B ◆ Compatible with standard Dialogic voice / fax / modem card ◆ Dimension: 483(W) x 450(D) x 177(H) mm
◆
8x5.25"+1x3.5" (or 1xNB CD- ROM+1xNB FDD) drive bays for RAID ◆ Detachable card cage for easy installation ◆ Hot-swap cooling fans for easy replacement ◆ 800W(600W+200W)redundant ATX PSU installable ◆ Special design for SPARCengine™ Ultra™ AXmp processor board ◆ Dimension: 483(W) x 673(D) x 220(H) mm ◆
19" 5U Height Rackmount CTI Chassis with 6 Drive Bays for ATX M/B
4x5.25"+1x3.5" (or 1xNB CD-ROM+1xNB FDD) drive bays for RAID Dual 12cm hot-swap ball-bearing cooling fans for better ventilation ◆ Dual card retainer positions ◆ ATX M/B applicable, especially for Big-AT size M/B ◆ One touch-free reset switch and one ON/OFF switch protection cap for secure access ◆ PS/2 redundant PSU installable ◆ Dimension: 482.6(W) x 495.3(D) x 221(H) mm ◆
◆
19" 4U Rack-
Super Compact
Ultra Slim 19" 1U Height Rack-mount Chassis for ATX M/B
19" 2U Height Chassis for ATX M/B
mount Chassis with 9 Drive Bays for ATX M/B
19" rack-mount chassis meets EIA RS-310C industrial standard ◆ 2x5.25"+1x3.5" drive bays ◆ Dual cooling fans generate positive air for better ventilation ◆ Easily-installed drive bracket with shock-resistant cushion and well-conductive rubber ◆ Dimension: 482(W) x 584(D) x 44(H) mm
19" rack-mount chassis meets EIA RS-310C industrial standard ◆ 1x5.25"+1x3.5" FDD+1x3.5" HDD drive bays ◆ Dual 8cm ball-bearing cooling fans for better ventilation ◆ One touch-free reset switch and ON/OFF switch inside the front panel for secure access ◆ Adopt Micro-ATX type 150W PSU ◆ Dimension: 482.6(W) x 430.6(D) x 88(H) mm
19" rack-mount chassis meets EIA RS-310C industrial standard ◆ Nine 5.25" drive bays for RAID & CD-ROM ◆ Three 12cm ball-bearing cooling fans for better ventilation ◆ Best solution for rack-mount server ◆ Modularized back panel for Baby-AT & ATX M/B ◆ Modularized PSU back panel ◆ Dimension: 482(W) x 638(D) x 177(H) mm
◆
◆
◆
Ultra Slim 19" 1U Height Rack-mount Chassis
Super Compact 19" 2U Height Chassis
Ultra™ AXe
19" rack-mount chassis meets EIA RS-310C industrial standard Dual cooling fans generate positive air for better ventilation ◆ Easily-installed drive bracket with shock-resistant cushion and well-conductive rubber ◆ Special design for SPARCengine™ Ultra™ AXe processor board ◆ Reserve 2 PCI slot for expansion ◆ Dimension: 482(W) x 610(D) x 44(H) mm ◆
◆
The Most Cost-effective 19" 4U Height Rackmount Chassis
Ultra™ AXi
19" rack-mount chassis meets EIA RS-310C industrial standard 1x5.25"+1x3.5" FDD+1x3.5" HDD drive bays ◆ Dual 8cm ball-bearing cooling fans for better ventilation ◆ One touch-free reset switch inside the front panel ◆ Adopt Micro-ATX type 150W PSU ◆ Special design for SPARCengine™ Ultra™ AXi processor board ◆ Reserve 2 master PCI slots for expansion ◆ Dimension: 482.6(W) x 430.6(D) x 88(H) mm ◆
◆
19" 5U Height Rack-mount CTI Chassis with 6 Drive Bays
Ultra™ AXi
19" rack-mount chassis meets EIA RS-310C industrial standard ◆ Power On/Off switch with light indicator and a reset switch inside the lockable door ◆ Dual cooling fans generate positive air for better ventilation ◆ Easily-installed drive bracket with shock-resistant cushion and well-conductive rubber ◆ Special design for SPARCengine™ Ultra™ AXi processor board ◆ Dimension: 482(W) x 450.8(D) x 177(H) mm
19" 5U Height Rack-mount CTI Chassis with 10 Drive Bays
Ultra™ AXdp
Ultra™ AXmp
◆
4x5.25"+1x3.5" (or 1xNB CD-ROM+1xNB FDD) drive bays for RAID ◆ Dual 12cm hot-swap ball-bearing cooling fans for better ventilation ◆ One touch-free reset switch and one ON/OFF switch protection cap for secure access ◆ PS/2 redundant PSU installable ◆ Special design for SPARCengine™ Ultra™ AXdp processor board ◆ Dimension: 482.6(W) x 495.3(D) x 221(H) mm
◆
19" 4U Industrial Rackmount PC Chassis for ATX M/B
Adopt modularized function panel for easy installation of multiple systems & redundant PSUs ◆ Power switch protection offered inside the panel cover to prevent accidental reset ◆ Two adjustable positions card retainer allow fitting of multiple types of cards ◆ Two 12cm ball-bearing fans provide a better ventilation to the system ◆ Modularized back panel for easy change of different type ATX M/B ◆ Compatible with standard Dialogic voice / fax / modem card ◆ Dimension: 483(W) x 450(D) x 177(H) mm
◆
8x5.25"+1x3.5" (or 1xNB CD- ROM+1xNB FDD) drive bays for RAID ◆ Detachable card cage for easy installation ◆ Hot-swap cooling fans for easy replacement ◆ 800W(600W+200W)redundant ATX PSU installable ◆ Special design for SPARCengine™ Ultra™ AXmp processor board ◆ Dimension: 483(W) x 673(D) x 220(H) mm ◆
19" 5U Height Rackmount CTI Chassis with 6 Drive Bays for ATX M/B
4x5.25"+1x3.5" (or 1xNB CD-ROM+1xNB FDD) drive bays for RAID Dual 12cm hot-swap ball-bearing cooling fans for better ventilation ◆ Dual card retainer positions ◆ ATX M/B applicable, especially for Big-AT size M/B ◆ One touch-free reset switch and one ON/OFF switch protection cap for secure access ◆ PS/2 redundant PSU installable ◆ Dimension: 482.6(W) x 495.3(D) x 221(H) mm ◆
◆
19" 4U Rack-
Super Compact
Ultra Slim 19" 1U Height Rack-mount Chassis for ATX M/B
19" 2U Height Chassis for ATX M/B
mount Chassis with 9 Drive Bays for ATX M/B
19" rack-mount chassis meets EIA RS-310C industrial standard ◆ 2x5.25"+1x3.5" drive bays ◆ Dual cooling fans generate positive air for better ventilation ◆ Easily-installed drive bracket with shock-resistant cushion and well-conductive rubber ◆ Dimension: 482(W) x 584(D) x 44(H) mm
19" rack-mount chassis meets EIA RS-310C industrial standard ◆ 1x5.25"+1x3.5" FDD+1x3.5" HDD drive bays ◆ Dual 8cm ball-bearing cooling fans for better ventilation ◆ One touch-free reset switch and ON/OFF switch inside the front panel for secure access ◆ Adopt Micro-ATX type 150W PSU ◆ Dimension: 482.6(W) x 430.6(D) x 88(H) mm
19" rack-mount chassis meets EIA RS-310C industrial standard ◆ Nine 5.25" drive bays for RAID & CD-ROM ◆ Three 12cm ball-bearing cooling fans for better ventilation ◆ Best solution for rack-mount server ◆ Modularized back panel for Baby-AT & ATX M/B ◆ Modularized PSU back panel ◆ Dimension: 482(W) x 638(D) x 177(H) mm
◆
◆
◆
The World's First
The World's First Load
Quad. Load Sharing (N+1) Hot-Swap Power Supply
Sharing (N+1) PS/2 Type Hot-Swap Power Supply
Leading Hot-swappable and highly reliable Designed for fault-tolerant computers ◆ Suitable for CTI application ◆ Four load-sharing redundant modules provide total 800W power output (600W output when one fails) ◆ Supports ATX type power input connector ◆ Output: 60A@+5V, 1A@-5V, 24A@+12V, 3A@-12V, 1.5A@+5V SB,
[email protected] ◆ One external IEC socket (for AC power input) cable to fit into the special design of chassis ◆ Dimension: 100(W) x 210(D) x 214(H) mm
◆
State-of-the-art design of redundant P/S True N+1 Load-sharing design Each module has 150W power output ◆ Special front panel and handle design for ease of use ◆ Three load-sharing redundant modules provide total 450Wpower output (300W output when one fails) ◆ Supports ATX type power output connector ◆ Output: 20A@+5V, 12A@+12V, 1A@-5V, 1A@-12V, 1.5A@5V SB,
[email protected] ◆ Dimension: 150(W) x 175(D) x 86(H) mm ◆
◆
◆
◆
The world's Most Compact PS/2 Type - 48V DC/DC Redundant PSU
The 300W PS/2 Type 24V or -48V DC/DC ATX PSU
Two load-sharing redundant modules to provide 450W output ◆ Specially provide 1A@-12V for CTI application ◆ -48V DC/DC converter for telecom applications ◆ Swappable fan to get highly security for 100% mission critical applications ◆ Output: 30A@+5V, 14A@+12V, 0.5A@-5V, 1A@-12V ◆ UL, CSA, TUV, CE approved ◆ Dimension: 150(W) x 140(D) x 86(H) mm
-48V DC input power converter is designed for telecommunication applications ◆ 24V DC input power converter is designed for vehicle applications ◆ Supports ATX type connector ◆ Specially provides 2A@ -12V(max.) for CTI application ◆ Output: 25A@+5V, 10A@+12V, 8A@+3.3V, 1A@-5V, 1A@-12V ◆ Dimension: 150(W) x 140(D) x 86(H) mm ◆
◆
The 300W PS/2 Type Redundant Power Supply
400W+400W/300W+300W True Load-Sharing N+1 Redundant PSU
PS/2 Type Hot-Swap Redundant PSU
◆
The world's most compact PS/2 type redundant power supply ◆ Two load-sharing redundant modules provide total 600W output ◆ Specially provides 1.5A @ -12V for CTI application ◆ Each module has its own fan to expel the heat and is more reliable ◆ Output: 30A@+5V, 14A@+12V, 15A@+3.3V, 0.5A@-5V, 1A@-12V ◆ UL, CSA, TUV, CE approved ◆ AT & ATX power connector optional ◆ Dimension: 150(W) x 175(D) x 87.5(H) mm
◆
Two full 400W/300W load-sharing redundant modules(50%+50%) ◆ Passed the 400W/300W load long time burn-in test (over 72 hrs in 400W burn-in test) ◆ Silver-plated German DIN connector ◆ Meets ATX 2.01 standard ◆ Output: 4005H: 50A@+5V, 15A@+12V, 30A@+3.3V, 1.5A@-5V, 1.5A@-12V 3005H: 30A@+5V, 15A@+12V, 12A@+3.3V, 0.5A@-5V, 0.5A@-12V ◆ Dimension: 353(W) x 201(D) x 105(H) mm
The world's most compact PS/2 type redundant power supply ◆ Two load-sharing redundant modules provide total 500W output ◆ Adopts swappable fans to get high security for 100% mission critical applications ◆ Output: 30A@+5V, 16A@+12V, 20A@+3.3V, 0.5A@-5V, 1.5A@-12V ◆ UL, CSA, TUV, CE approved ◆ BPS-270RD-1 for front loading design ◆ AT & ATX power connector optional ◆ Dimension: 150(W) x 175(D) x 85(H) mm
Slim type of 150W AT/ATX Power Supply
The 450W PS/2 Type ATX PSU
The Most Compact 70W 24V or 12V DC/DC PSU
◆
40.5mm height, best solution 95~135V, 180~265 auto range input ◆ 1U height Chassis ◆ Output: 10A@+5V, 6A@+12V, 1A@-12V, 0.1A@-5V ◆ Dimension: 100(W) x 190(D) x 40.5(H) mm
◆
◆
◆
High efficient design for PS/2 type UL, TUV, CSA and CE approved ◆ Output: 40A@+5V,
[email protected], 17A@+12V, 1.5A@-12V, 0.5A@-5V ◆ Dimension: 150(W) x 140(D) x 86(H) mm
24V DC input power converter is designed for truck applications ◆ 12V DC input power converter is designed for mobile applications ◆ All models are slim and high efficient designed ◆ Output: 7A@+5V, 2.5A@+12V, 0.3A@-5V, 0.3A@-12V ◆ Dimension: 80.6(W) x127(D) x 50(H) mm
Leading
◆
◆
Advanced AIO Panel Board with Ethernet/VGA/Sound Function, Based on the Celeron™ Processor Compact Panel Workstation with 14.1" TFT Display
Supports 4 SIO/2 PIO, 1 KB/1 Mouse and 2 USB ports ◆ Supports 10/100 Base-T RJ-45 Ethernet ◆ Supports IrDA interface ◆ Built-in 16-bit MIC/SPK ◆ Dimension: 188(W) x 135(H)mm
14" TFT LCD display with 1024x768 resolution 6-slot PCI/ISA Bus backplane supported ◆ Front panel NEMA4(IP52) /NEMA12(IP56) complied ◆ Hardened aluminum alloy sealed front panel ◆ Powerful and easy-to-use platform ◆ No sparkle and low radiation ◆ Front panel LCD brightness control ◆ Optional front speakers for multimedia purpose ◆ Optional resistive touch screen ◆ Dimension: 387(W)x355(H)x184.4(D) mm
World's First Panel PC with 14.1" TFT Display, Based on the Intel® Pentium® II Processor
Pentium ® Processor Based Panel PC with 13.3" TFT Display
EZ-Work Panel PC with 12.1" TFT Display, Based on the Pentium® Processor
◆
Supports Pentium® II(Celeron™) processors up to 450MHz ◆ Adopts Intel® 440BX chipset ◆ Adopts 14" TFT panel display ◆ One DIMM socket supports up to 256MB ◆ Adopts C&T 69000 AGP VGA/ panel display (2MB VRA inside) ◆ Supports 10/100 Base-T Ethernet ◆ Built-in 16-bit SPK/MIC ◆ One socket for DOC supports up to 144 MB ◆ Supports two parallel, four serial and two USB ports ◆ Optional resistive touch screen ◆ Dimension: 387(W)x310(H)x89.2(D) mm
◆
Supports Intel® Pentium® processor with MMX technology ◆ Supports two DIMM 16MB~128M SDRAM ◆ Adopts C&T 6555 Chipset (2MB VRAM inside) ◆ Adopts 13.3" TFT panel display ◆ Built-in CD-ROM, FDD and HDD ◆ Built-in PCMCIA Type 3x1 Slot ◆ One PCI/ISA expansion slot ◆ Supports 10/100 Base-T Ethernet ◆ Built-in 16-bit SPK/MIC ◆ One socket for DOC supports up to 144MB ◆ Supports 2 parallel, 4 serial and 2 USB ports ◆ Dimension: 370(W)x280(H)x102(D) mm
Reserves space for PPB withprocessor ranging from Pentium® to Pentium II ◆ Supports 12.1"TFT panel display ◆ Supports 10/100 base-T Ethernet ◆ supports 2 parallel, 4 serial and 2 USB ports ◆ One socket for DOC supports up to 144MB ◆ EZ-Work stand for multi-purpose applications ◆ Membrane LCD brightness control(PPC-5000) ◆ Front speakers for multimedia purpose (PPC-5000S) ◆ Optional resistive touch screen ◆ Dimension: 350(W)x280(H)x65.5(D) mm
14" 1024x768 Color TFT Panel Display Kit
12.1" 800x600 Color TFT Panel Display Kit
6.4" 640x480 Color TFT Panel Display Kit
14" TFT Panel Display XGA, 1024x76 8, 262K colors ◆ 0.278mm x 0.278mm pixel dimension ◆ Reserves space for PPB ( Panel Board), with processors ranging from Pentium® to Pentium II ◆ Built-in Ethernet and 16-bit sound ◆ Built-in 65W universal power supply ◆ PCI/IDE hard disk interface ◆ Dimension: 389(W)x260(H)x82.6(D) mm
12.1" TFT Panel Display SVGA, 800x600, 262K colors ◆ Reserves space for PPB, with processors ranging from Pentium® to Pentium II ◆ Built-in Ethernet ◆ On-board 4 SIO/2 PIO, 1 KB/1 Mouse and 2 USB ports ◆ Built-in 16-bit MIC/SPK ◆ Built-in 65W universal input power supply ◆ PCI/IDE hard disk interface ◆ Dimension: 367(W)x220(H)x66.7(D) mm
Supports Pentium ® II EMC processors up to 4XX/100MHz ◆ Built-in Intel 440BX chipset ◆ Adopts C&T 69000 AGP VGA/panel display (2MB VRAM inside) ◆ One DIMM socket supports up to 256MB ◆ One socket for DiskOnChip supports up to 144MB ◆
◆
◆
◆
◆
◆
◆
◆
◆
6.4" TFT Panel Display VGA, 640x480, 262K colors Reserves space for PPB (Panel Board) with processors ranging from Pentium® to Pentium II ◆ Built-in Ethernet ◆ Four SIO/two PIO, one KB/one Mouse and two USB ports ◆ Built-in 16-bit MIC/SPK ◆ Built-in 65W universal power supply ◆ Dimension:246(W)x160(H)x130.4(D) mm ◆
◆
◆
Portwell, Inc.
American Portwell Technology, Inc.
3F, No.88, Sec.1, Nei-Hu Rd., Taipei, Taiwan, R.O.C. Tel: +886-2-27992020 Fax: +886-2-27991010 E-mail:
[email protected]
41380 Christy St. Fremont, CA 94538 Tel: (510)979-0640 Fax: (510)979-0603 E-mail:
[email protected]
http://www.portwell.com.tw
