Preview only show first 10 pages with watermark. For full document please download

Mount #30540 Yamaha Grizzly 660 4x4

   EMBED

Share

Transcript

Plow Mount Installation Instructions Kit #30540 ATV 02-07 Yamaha Grizzly Auto ATV Yamaha 660660 Grizzly Auto Plow Mount Parts R-Pins Plow Mount Tools Needed: 1) Ratchet w/ 10mm Socket and 13mm Socket 2) Ft. lb. torque wrench 3) Protective eyewear STEP 1 Front bolts Existing threaded hole Rear bolts Remove two short shoulder bolts on front of skid plate and two long shoulder bolts at bottom rear of plate. Gently pull down on front of skid plate and forward to remove. Permanent mount bracket Insert permanent mounting bracket onto ATV frame and align bolt holes with existing threaded holes on ATV frame. Using bolts from kit, attach bracket to ATV frame as shown with 10mm wrench. Torque these bolts to 18 ft. lbs. Replace skid plate - insert rear rst, push and lift up front until it snaps in place. Replace short bolts at front and long bolts under rear. STEP 2 R-pin (rear) Short pin (rear) Long pin (front) R-pin (front) Turn front wheels to side. Hold mount in place under frame, align front holes with mounting bracket and insert long pin all the way through. (Plow mount is now supported by bracket.) Part No. 50140RevB Part No. 50140_D Straighten wheels and at rear of mount, insert short pin through mount hole over the top of frame tube and through mount hole on other side. Install R-Pins on both front and rear mount pins. Installation is complete. Periodically check mount bolts and re-torque if needed. ©Copyright 2006 Agri-Cover, Inc. ALL RIGHTS RESERVED © Copyright 2013 Agri-Cover, Inc. All Rights Reserved 110607 081613