Transcript
Moyra - 145 19W RGB - Optic 45° Model No: MOY.039.28.US Date:
Project:
Fixture Type:
Specifier/Rep:
C ompliance LM-79-08 and LM-80-08 Certified by
Availab le for International sp ecificat ion s b y ad d in g 'INT' at t h e en d of t h e exist in g Mod el # In t ern at ion al sp ec sh eet s are availab le u p on req u est
Model:
MOY.039.28.US
Installation:
Indoor and Outdoor Recessed Drive over Fixtues
Housing:
117.5mm / 4 5/8" CAS.0061.99 Required
Light Color:
RGB
Color Temperature:
RGB
Fixture Finish:
Satin Stainless Steel
Fixture Material:
Aluminum Anticorodal Alloy UNI 6060 Anodised
Diffuser:
PMMA
Optic:
45°
Lamp Type:
RGB Power LED
Number of LEDs:
9
Total Wattage:
19W
Lamp Voltage:
24Vdc
Lamp Life:
50,000 hrs at 70% of lamp lumen output with IES LM-80. For optimized perfomance follow instruction sheet.
IP Rating:
IP67
Diameter:
145mm / 5 11/16"
Height:
91.6mm / 3 5/8"
Weight:
1700g / 59.96oz
Breaking Strength:
IK08
Screws:
Stainless Steel AISI 316L (TORX TX 25 + PIN)
Exact Measurements: Metric
Additional Details Recessed into floor; Constant voltage supply 24Vdc DMX or DALI dimmable, parallel connection - Power Supplies and Control gear are not included see components, for wiring diagram see downloads ,On request, LEDs are available also in Red, Blue, Green colors. Requires Housing Box to be ordered separately.
30 Tycos Dr. Toronto, ON Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319 www.zaneen.com,
[email protected]
Page 1 of 2
Moyra - 145 19W RGB - Optic 45° Model No: MOY.039.28.US Date:
Project:
Fixture Type:
Specifier/Rep:
Gasket:
Silicone Rubber,Telfon,Neoprene
Power Supply:
Constant voltage supply 24Vdc dimmable, parallel connection (Not Included)
Control Gear:
Sold separately (see components)
Load Resistance:
1500kg / 3306lbs - Roll over
Lumen Chart Photometric File
Power
Color Temperature
Nominal Lumen
Actual Lumen
MOY.039.28
19W
RGB
661
368
MOY.039.28 R
19W
RGB (Red)
173
118
MOY.039.28 G
19W
RGB (Green)
400
240
MOY.039.28 B
19W
RGB (Blue)
87
50
Accessories Moyra - Housing Box - 145mm - [CAS.0061.99] -- 145mm / 5 11/16" Housing Box
System Components Moyra - Housing Box - 145mm - [CAS.0061.99] -- 145mm / 5 11/16" Housing Box DMX /0-10V Control Gear - 24Vdc - 3 Channels - [ECO.0038.99] -- Constant Voltage Dimmable Dali/PWM Interface Control Gear - 3 Channels - [ECO.0049.99] DMX Splitter - 1 input / 3 Output channels - [ECO.0020.99] USB -DMX / RDM Interface - [ECO.0041.99] Power Supply - constant voltage 24Vdc - 10W - [ALI.0059.99] -- Main Voltage Constant 24Vdc - 120÷240V - 10W - 50/60Hz Power Supply - constant voltage 24Vdc - 25W - [ALI.0060.99] -- Main Voltage Constant 24Vdc - 120÷240V - 25W - 50/60Hz Power Supply - constant voltage 24Vdc - 20W - [ALI.0103.99] -- Main Voltage Constant 24Vdc - 90÷264V - 20W - 50/60Hz
Available Sizes and / or Lamping Moyra - 145 19W RGB - Optic 45° - [MOY.039.28.US] -- 9 RGB Power LED, 2W - 24Vdc Moyra - 180 39W RGB - Optic 45° - [MOY.043.28.US] -- 17 Power LED, 2W - 24Vdc
30 Tycos Dr. Toronto, ON Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319 www.zaneen.com,
[email protected]
Page 2 of 2
Wiring Diagram Reference
R
Date:____________________________ Project:_______________________________ Fixture Type: ______________________ Specifier/Rep:__________________________ Wiring diagrams and electrical connections
The new lighting systems, that use light sources in a LED solid state must be connected to the main voltage through electronic devices that maintain the critical parameters of operation constant. With Leds in particular, the current values that pass through the light source must remain constant and if necessary measurements are not taken to keep these parameters constant, the LED will tend to absorb higher currents resulting overheating triggering a vicious mortal cycle of the semiconductor. Because of this physical-electric phenomenon the systems with LED technology need very sophisticated control devices compared to the traditional sources. The current control can be integrated into the power supply or can be placed between the power supply and the LED system. In this case the Led connection should be done in series with a maximum quantity of 10/12 Led that can be connected In the most evolved systems the control electronic can be split and integrated directly on the PCB together with the Leds; here the connection can be done in parallel with a 24V dc power supply and without any limit of the quantity of Leds that can be connected To facilitate the user in consulting this catalog, in this section there is a list of all the diagrams of connection between control gears , interfaces and power supplies, as well as the combination of the correct power supplies / control gear and lighting systems showing the article codes.
Important note: Suggested maximum distance from driver: 30ft (using 18 AWG solid copper wire) Disclaimer: Distances, type of wiring and gauge must be determined by a certified professional to avoid “voltage drop” problem.
Maximum 9m (30 ft)
+
+
-
+
-
+
-
+
-
+
-
+
-
Serial connection
Maximum 9m (30 ft)
+
+
-
+
-
Parallel connection
30 Tycos Drive, Toronto, Ontario, Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319, www.zaneen.com
[email protected]
Wiring Diagram Reference
R
Date:____________________________ Project:_______________________________ Fixture Type: ______________________ Specifier/Rep:__________________________
P
DMX/DALI - Parallel connection for RGB 24Vdc dimmable systems
DMX interface
IN
OUT Power supply
IN
+ -
OUT Power supply
+ -
LED
LED
LED
RGB
RGB
RGB
OUT R G B
LED
LED
RGB
RGB
RGB
LED
LED
LED
OUT Power supply
IN
+ -
RGB
RGB
24Vdc
ECO.0047.99
ALI.0076.99 ALI.0074.99 ALI.0072.99
BUS IN/OUT
DMX control gear ECO.0048.99 *
OUT R G B
BUS OUT
DMX Interface DALI converter IN
ECO.0038.99
DMX Interface DALI converter IN
LED
Power supply codes
DALI converter ECO.0049.99
RGB IN
BUS IN/OUT
BUS OUT
DMX / DALI Controller
* PC only needed for programming
30 Tycos Drive, Toronto, Ontario, Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319, www.zaneen.com
[email protected]
