Transcript
MPEG HD Mediaplex DMP-9624M
HD Encoder & Modulator Latency 800ms Chroma Format 4:2:0 Resolutions 1080i
Introduction
Feature
CASTWIN’s the professional and hi-class product combining low delay high definition encoder and 8-VSB (ATSC) or QAM Modulator. It is adopting high technology and very effective to make whole digital transmission system compact and easy to control with front VFD. Moreover, it supports both MPEG-2 and MPEG-4 AVC so that operator can select the format and use.
• • • • • • •
Competitiveness • Cost effective as integrated modulator and up-converter • Excellent option for operators who competitively pursue the best performing encoding device with high resolution • Best option for real time encoding with low latency • Able to secure space with compact and light weight design • Make operators pay for less installing fee as offering quick and easy setup
• • • • • • • • • .
Component, Composite, HDMI, HD/SD-SDI video inputs. Digital, Analog and Serial Digital embedded audio inputs. 5.1 channel SPDIF audio optical input. Low latency as 800ms Additional 1xASI input for supporting of insertion of externally generated PSIP into the transport stream. Selectable MPEG-2 HD or MPEG-4 AVC HD real-time video encoding. Simultaneous outputting of 1xRF and 1xTransport . stream(ASI) with UDP/IP or RTP/IP transport stream CBR or VBR outputs. Dolby Digital (AC-3), MPEG-1 Layer Ⅱ, AAC, HE-AAC audio encoding. User selectable resolution and bit-rate, output frequency. Supports internally generated TVCT & CVCT . Supports EIA-708 closed caption insertion via HD-SDI(SMPTE 334). Control and monitoring via web browser, front panel or SNMP Phase Noise VHF -105 dB@20KHz, UHF -103 dB@20KHz Frequency Range : 50MHz ~ 870 MHz Excellent RF Output performance
Options • ATSC(8-VSB) Modulation • QAM(Annex A,B and C) Modulation
www.hoseotel.com
MPEG HD Mediaplex DMP-9624M Specification Video Input Analog Input Digital Input
Component , Composite HDMI , SDI
Resolutions
480i29.97/30, 576i25, 720p50/59.94/60, 1080i25/29.97/30
Aspect Ratio
4:3, 16:9
RF Output Frequency Range Impedance Output Level Level Control Range MER After Equalizer MER Before Equalizer Phase Noise
Audio Input Analog
Digital Optical
Input Freq. Range Impedance Input Sampling Rate Input
1 Stereo(2channel) 20Hz ~ 20KHz 600 Ω/ 20KΩ AES-EBU Embedded SDI/HDMI 32,44.1,48 KHz SPDIF(5.1 Channel) (pass through
Adjacent Channel Carrier/Attenuation Characteristic Spurious Return Loss Frequency Response Frequency Tolerance Group Delay PCR Jitter
50~870 MHz 75 Ω 55 ± 5 dBmV 0 ~ -15 dB 42 dB 37 dB VHF -105 dB@20KHz UHF -103 dB@20KHz ≤ -45 dB (Out of band) ≤ -63 dB ≥ 17 dB ± 0.5 dB ± 2 ppm ± 20 ns ≤ ± 200 ns
TS Output TS Input Transport Stream Packet Format
Transport Stream TS Bit Rate ASI 1 Port 188 Byte
Packet Format
Video Encoder Encoding Encoding Rate Chroma Format Bit Rate Mode Latency
MPEG-2 HP@HL, MP@HL , MP@ML MPEG-4 AVC HP@L4 , MP@L3 MPEG-2 : 2~25 Mbps MPEG-4 AVC : 0.5~25 Mbps 4:2:0 CBR,VBR 800ms~
Audio Encoder Sampling Rate Dolby Digital® AC-3(5.1CH) MPEG-1 Layer II MPEG-4 AAC-LC MPEG-4 HE-AAC v1 MPEG-4 HE-AAC v2
Ethernet Interface Type Protocols IP TS Output Output Ethernet type Format IP Address Format TS Bit Rate TS Packet Rate
32, 44.1, 48KHz 128,192,256,384 Kbps 192,224,256,320,384 Kbps 32~384 Kbps 32~192 Kbps 32~96 Kbps
General Power Requirements Power Consumption Weight Operating Temperature Dimension(W x H x D)
ASI 1 port MPEG-2 : 2~25 Mbps MPEG-4 AVC: 0.5~25 Mbps 188 Byte
10/100Base-T SNMP
1 Port 10/100 Base-T UDP/IP, RTP/IP Multicast, Unicast MPEG-2 : 2~25 Mbps MPEG-4 AVC : 0.5~25 Mbps 188 Byte
AC 90~230V, 50/60Hz Max. 100W 4kg -10~50°C 482 x 44 x 383 mm
Configuration
Head Office / Laboratory
Factory
# 722-8 YukSam-Dong, Kangnam-Gu, Seoul, Korea TEL : +82 2 6005 9101 FAX : +82 2 3453 8338 E-MAIL :
[email protected]
#684-1 Dungchun-Dong, Kangseo-Gu, Seoul, Korea TEL : +82 2 6005 9075 FAX : +82 2 3453 8338 E-MAIL :
[email protected]
www.hoseotel.com
