Transcript
Technical Datasheet
MPR-ES-1
Managed Ethernet Switch
PMC Switch/NIC for Ethernet Networks
Conduction or Convection Cooled PMC
Features 8 – 10/100 Mbps Ethernet Ports 1 – 10/100/1000 Mbps Port/Uplink 1 – 10/100/1000 Mbps Host Port On-board Magnetics Health Monitoring User-configurable Management Features
Rugged Design (Conformal Coating is available)
Rear I/O Built-in Gigabit NIC
Description
Ethernet
The MPR-ES-1 is a full-featured managed or unmanaged Ethernet switch implemented on a rugged, rear I/O, PMC card. The switch is ideal for embedded networking applications in both conduction and convection cooled systems.
•
The 10-port switch includes eight (8) 10/100 Mbps switch ports and one 10/100/1000 Mbps switch/uplink port brought to the card’s P14 rear I/O connector for use in either “in-chassis” or external networking applications. A second 10/100/1000 Mbps switch port connects to an on-board Ethernet controller that provides the host computer with a direct connection to the switch.
•
This Ethernet switch card can be installed directly into the PMC site of an embedded system. It is also available in a stand-alone rugged Ethernet switch box or factory-integrated into Ballard’s AB2000 Series Avionics BusBox®.
Hardware The MPR-ES-1 is a scalable Ethernet switching solution that combines an advanced Marvell® switch device with on-board magnetics for high-performance and reliable operation. The switch provides IEEE 802.1X MAC-based authentication and support for up to 8K MAC address entries with automatic learning and aging. The Ethernet switch collects information about card and network health, along with temperature data, and makes it available through the host or external GigE ports. The CCPMC form factor allows easy integration with modern embedded computers, including VME, VME-64, cPCI, and VPX systems. Low power consumption and high MTBF ratings make the MPR-ES-1 an ideal choice for rugged, high-availability systems.
• • • • •
Software Driverless unmanaged switch operation API for management functions • Drivers for various operating systems • •
Benefits • • • • • • •
PMC form factor allows easy integration Low cost system expansion and upgrade Rugged design suits demanding applications Expandable through distributed switch architecture Free customer support for product life 3-year limited warranty standard RoHS compliant
Applications • • • •
Operation
•
The MPR-ES-1 operates as a simple unmanaged switch by default without the need for drivers or software. The card can also be set up to operate as a managed switch, where the user can control complex switch operations and gather detailed statistical data.
•
Switch management functions are set using the management API either through the external GigE switch port or through the PCI bus and the card’s built-in host port. Switch configuration settings can be saved to the card, and if desired, the switch is easily reset to factory defaults for unmanaged operation.
IEEE 802.3 compliant Host NIC and switch operation Selectable management interfaces VLAN, QOS and ingress/egress limiting MAC table filtering Port mirroring and trunking Virtual Cable Tester™
•
Ethernet expansion for embedded systems High reliability/high throughput switching Network bridging/segmentation Red/Black network segmentation VoIP and digital video N-redundant network “In-chassis” or external networking
The Avionics Databus Innovators www.ballardtech.com
Specifications
MPR-ES-1 Managed Ethernet Switch Features
System Diagram
General Managed or unmanaged operation (unmanaged by default) 8K MAC address table Switch ports 8 - 10/100/Auto (external) 1 - 10/100/1000/Auto (external) 1 - 10/100/1000/Auto (host) Full/Half duplex Auto crossover detection Independent MAC per port Link/activity LEDs IPv4 and IPv6 operation
Status LEDs (10)
10-Port Managed Ethernet Switch 10/100 Ports (8)
Management Processor
PMC Connectors P11, P12
Host Ethernet Controller
Gigabit Port
Magnetics (8)
Magnetics
PMC Connector P14
Gigabit Port
Magnetics
Management Layer 2/3 support Onboard management processor Multiple management interfaces External switch port PCI bus via host NIC Serial management console VLAN Port based, IEEE 802.1q Quality of Service (QOS) Flexible priority control
Host Ethernet Controller 10/100/1000 Mbps Dedicated PCI interface IPv4 and IPv6 operation
Health Monitoring and Diagnostics BIT (Built-In Test) Temperature monitoring RMON statistics counter Port mirroring Virtual Cable Tester™ Hardware integrated TDR Detects and reports faults Shorts Opens Pair swaps Impedance mismatches
Specifications
Ordering Information
Hardware
Part No. MPR-ES-1 Includes manuals and software CD Conformal coating option available
Universal PCI interface 3.3V or 5V I/O 33 or 66 MHz, 32 bit Component temperature: -40 to + 85 deg C Storage temperature: -55 to +100 deg C I/O Connectors: P14 (rear I/O) Dim: 2.91 x 5.66 inch (74 x 143.75 mm) Weight: 2.3 oz. Power: 5 V @ 1.5 A (idle) 5 V @ 2.2 A (typ) 5 V @ 2.7 A (max) MTBF: 1,680,000 hours IPC class III design and manufacture RoHS 6/6 compliant
Complimentary Products MPR-ES-1: Ethernet switch PMC card described in this datasheet AB2-ES: Rugged Ethernet switch box using the MPR-ES-1 AB2000 Avionics BusBox enhanced with the MPR-ES-1 Ethernet switch Contact factory for details.
Software None required for unmanaged switch operation API and examples for management functions Drivers for NIC available for most operating systems
The Avionics Databus Innovators Aerospace Military Commercial
Y
O
ISTER
AS 9100 ISO 9001
ED
BR181-20110623
G
C
©2011 Ballard Technology Inc. All rights reserved. Printed in the USA. BusBox® is a registered trademark of Ballard Technology, Inc. All other trademarks are the property of their respective owners. Specifications may change without notice.
RE
Ballard Technology is committed to quality and is AS9100 / ISO 9001 registered.
M PA N
Interfaces Embedded Systems Software
11400 Airport Road Everett, WA 98204 USA T 800.829.1553 T 425.339.0281 F 425.339.0915 E
[email protected] W www.ballardtech.com
