Transcript
MOBILE VIDEO STUDIO
MS-2800
Quick Start Guide www.datavideo-tek.com
Table of Contents Warnings & Precautions ............................................................................................................. 2 Packing List ................................................................................................................................ 3 Introduction ................................................................................................................................ 4 Transportation & Placement ....................................................................................................... 5 Opening the case ....................................................................................................................... 5 Unpacking the SE-2800 Control Panel Keyboard ...................................................................... 6 Setting up the 17” monitor .......................................................................................................... 6 Front Overview ........................................................................................................................... 7 Rear Overview............................................................................................................................ 8 MS-2800 Link Map ..................................................................................................................... 9 MS-2800 Fully loaded Link Map ............................................................................................... 10 System Connection Diagram .................................................................................................... 11 Configuration ............................................................................................................................ 12 Specification ............................................................................................................................. 13 Service & Support .................................................................................................................... 16
1
Warnings & Precautions 1. Read all of these warnings and save them for later reference. 2. Follow all warnings and instructions marked on this unit. 3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this unit in or near water. 5. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious damage. 6. Slots and openings on the cabinet top, back, and bottom are provided for ventilation. To ensure safe and reliable operation of this unit, and to protect it from overheating, do not block or cover these openings. Do not place this unit on a bed, sofa, rug, or similar surface, as the ventilation openings on the bottom of the cabinet will be blocked. This unit should never be placed near or over a heat register or radiator. This unit should not be placed in a built-in installation unless proper ventilation is provided. 7. This product should only be operated from the type of power source indicated on the marking label of the AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your local power company. 8. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord will be walked on, rolled over, or otherwise stressed. 9. If an extension cord must be used with this unit, make sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the extension cord’s rating. 10. Make sure that the total amperes of all the units that are plugged into a single wall outlet do not exceed 15 amperes. 11. Never push objects of any kind into this unit through the cabinet ventilation slots, as they may touch dangerous voltage points or short out parts that could result in risk of fire or electric shock. Never spill liquid of any kind onto or into this unit. 12. Except as specifically explained elsewhere in this manual, do not attempt to service this product yourself. Opening or removing covers that are marked “Do Not Remove” may expose you to dangerous voltage points or other risks, and will void your warranty. Refer all service issues to qualified service personnel. 13. Unplug this product from the wall outlet and refer to qualified service personnel under the following conditions: a. When the power cord is damaged or frayed; b. When liquid has spilled into the unit; c. When the product has been exposed to rain or water; d. When the product does not operate normally under normal operating conditions. Adjust only those controls that are covered by the operating instructions in this manual; improper adjustment of other controls may result in damage to the unit and may often require extensive work by a qualified technician to restore the unit to normal operation; e. When the product has been dropped or the cabinet has been damaged; f. When the product exhibits a distinct change in performance, indicating a need for service.
2
Packing List 1
x
Goose neck LED light
1
x
Goose neck MIC
4
x
Tally LED TD-1 with
4
x
Black Velcro 36cm
4
x
GPI Cable Stereo 1.2M
4
x
Headphone
4
x
ITC-100SL
4
x
XLR Cable + CON 20M
5
x
120mm cable tie
10
x
200mm cable tie
10
x
Anti-vibration screw + M5*10 washer
1
x
Y type USB cable
2
x
2.5" HDD enclosure
10
x
Screw M3*4mm
2
x
ISO screw 2*6mm
2
x
HD sticker
4
x
Blank sticker
1
x
AC Power Cord
1
x
MS-2800 Quick Start Guide
1
x
SE-2800 Quick Start Guide
1
x
PD-2 Quick Start Guide
1
x
HDR-70 Quick Start Guide
1
x
TLM-170H series Instruction Manual
1
x
ITC-100 Instruction Manual
1
x
RP-31 Instruction Manual
1
x
AD-100 Instruction Manual
3
Introduction MS-2800, the newly integrated Mobile Video Studio with cutting edge products from Datavideo, is a premier choice for live video production and high quality, reliable recording. Offering innovative solutions to satisfy the need for mobility and controlling multiple cameras at same time on the field or in the studio, MS-2800 includes, HD/SD Digital Video Switcher, Intercom Unit, HD/SD Recorders, 17.3” LCD Screen Monitor, Vector Scope Monitors, Power Centers, Audio Delay Box, and different types of Real Panels with XLR, SDI, and HDMI connectors for flexible applications.
4
Transportation & Placement The MS-2800 is heavy – approximately 70Kg – Do not attempt to lift or move it on your own. A minimum of 2 people are required to lift or move this product. There are two carry handles on either side of the product, please use these handles to safely share the weight between the people lifting the MS-2800. Always use a trolley to safely transport the MS-2800 over distances of 2 Metres or more. The MS-2800 should be always lifted and placed in an upright position; do not place or try to move the unit in any other way as damage or injury could result. Place the MS-2800 on a strong, stable, flat surface that is capable of supporting the weight. Do not use a folding or single leg table to support the MS-2800.
Opening the case On each side of the MS-2800 case there are wing nut clasps securing the front and rear covers.
Undo each clasp by folding the wing nut out and then rotating it. The clasp can then swing free of the catch. Once undone you can then remove the front and rear covers:
Rear
Front
5
Unpacking the SE-2800 Control Panel Keyboard The SE-2800 Control Panel Keyboard is held in its shipping position by a securing bolt on either side. To lower the Control Panel first remove the securing bolts as indicated below.
The bolts can then be stored on each hinge bracket before lowering the Control Panel Keyboard.
Setting up the 17” monitor Follow the steps below to set up the LCD monitor: - Unfasten the two silver screws on the Left and Right of the TLM-170 drawer handle. - Using the handle pull out the TLM-170 monitor until it clicks into place at the end of its rail. - Now bring the LCD panel into an upright viewing position.
2
1
6
Front Overview Please refer to the individual instruction manual of each item for more details on actual operation.
TLM-170HM: Multi image Preview includes monitoring of input channels, PGM and PVW output
HDR-55 or HDR-70: Record output signall. Removable HDD for easy connection to an editing computer via USB
VSM-100: Record output signall. Removable HDD for easy connection to an editing computer via USB
ITC-100: Intercom/Tally system provides up to 8 channel bi-directional communication with camera crew
SE-2800: Digital video switcher, Two unit design – Control Panel and Base Unit
7
Rear Overview Please refer to the individual instruction manual of each item for further details. Bare Bones MS-2800 rear panel shown - your configuration will be different depending on your order.
RP- 45A: This rack provide up to 8 CVBS outputs by converting a single HD/SD-SDI Video input signal RP-31: The RP-31 is supplied with numbered cables for connecting to the ITC-100. PD-3: Power supply to all the integrated devices RP51: RP-51 is a combination of VP-445 + AD-100 + Two SDI Out and one Multi-view HDMI OUT PD-2: It is able to supply multiple 12V power outputs from a 100-240V AC Input. SE-2800: Digital video switcher, Two unit design – Control Panel and Base Unit
8
MS-2800A Link Map
9
MS-2800B Link Map
10
System Connection Diagram
11
Configuration
12
Specification Monitor LCD Display
17.3” TFT LCD
Resolution Brightness (Luminance) Contrast Ratio
RGB 1600 x 900 pixel 220 cd/m² 500:1
View Angle
Top: 40 deg Bottom: 60 deg Left: 60 deg Right: 60 deg (Using 2U 19'' rack mount to support adjustable view angle)
Video Input
2 CV / S-Video / HD-YUV / HD & SD-SDI + HDMI (ver 1.1 x 2)
Tally Indication
1
HD/SD-SDI
Standard Bandwidth
CV
YUV
SMPTE 259M-C (270Mbps - 525/625 Component Video) & SMPTE 292M (1.485/1.001 Gbps) > 5.0MHz
Differential of Gain (DG) ＜3％ Differential of Phase (DP) ＜3° S/N:
> 50 dB
Bandwidth
> 5.2MHz
Differential of Gain (DG) ＜3％ S/N:
> 50 dB
Input
1x BNC connector for HD/SD-SDI input 2x XLR connector for audio input
Output
1x BNC connector for HD/SD-SDI pass through output 1x BNC connector for SDI output 1x HDMI connector for HDMI output (1.1)
Others
1x Mini XLR connector for GPI remote control 1x D-Sub(9 Pin) for RS-422 or RS-232 1x IEEE-1394 Port for connection to PC, MAC and HDV device. 1x Phone plug for audio monitor output
Recorder
Interface
Video Input
HD (1080i/50 - 1080/59.94i – 720p/50 – 720/59.94p) SD (480/59.94i, 576/50i)
Audio Delay Audio Input Audio Output Audio Spec
2 x balanced stereo audio, XLR connectors 2 x unbalanced stereo audio, RCA / Phone sockets 2 x balanced stereo audio, XLR connectors 2 x unbalanced stereo audio, RCA / Phone sockets - Bandwidth 20~20KHz < +/- 3dB - S/N Ratio > 70 dB - THD. < 0.1% (This spec must use precision to analyze data inside of signal)
13
Switcher (8CH) Inputs
Outputs
CV Signal
Maximum 8 inputs which can be configured to three options: - 8x HD SDI or 8x SD SDI - 4x CVBS, (2x HDMI and 2x HD-SDI or 2x SD-SDI) - 4x CVBS, (4x HD-SDI or 4x SD-SDI) - 3x BNC output connectors for SDI Outputs - 2x HDMI for Multi screen - RJ-45 for PC Remote controls & Firmware upgrade - 2x BNC for Sync-In and Sync-Out - DB-9 for Console - Serial D-Sub 9 Pin + 1x RS422 - 1x Tally Output D-Sub 25 Pin 12 Channel Open Collector Output - GPI out 1.0 Vpp NTSC / PAL
SD/HD SDI Signal
SD: SMPTE 259M HD: SMPTE 292M
Audio
- Output analog level, balanced audio at impedance 600Ohm 0dB - Digital signal dynamic range for 60Hz mode +20dB - Digital signal dynamic range for 50Hz mode +18dB - S/N: for analog, digital to analog*** -75 dB or higher - B/W: 20 ~20K +/- 3dB - THD:B/W: 20 ~20K < 0.01% - Digital signal sampling frequency 48kHz - Resolution 20bit
Intercommunication Base Unit: MIC / Headset
3.5mm Stereo Jack Socket for combination Headphone / Microphone Headset Impedance 8~600 ohms 100mW(min)
Headphone
¼” (6.3mm) Stereo Headphone Socket Headset Impedance 8~600 ohms 100mW(min)
Light Socket (12V DC)
3 pin XLR connector. Pin2: 12V, Pin3: GND. Light power consumption 12V/100mA (max).
Microphone
3 Pin XLR / ¼” (6.3mm) Jack Microphone Socket Switchable Condenser / Dynamic Input Microphone Level -67dB
Input / Output
Frequency Response THD
550-3.6KHz, < +/-3dB < 3%
S/N
> 50dB
Operating Range
Up to 200m between Base Station and Slave
Slave Unit: Input
5 Pin XLR Connector
MIC / Headset Socket
3.5mm Stereo Jack Socket for combination Headphone / Microphone Headset Impedance 8~600 ohms 100mW(min) Microphone Level -67dB Or 2.5mm Stereo Jack Socket, for Motorola Mobile Phone type headset / microphone
Tally Out Socket
3.5mm Jack Socket to connect to TD-1 Tally Indicator
Tally LED
Bi-Color LED – RED indicates LIVE / AMBER Indicates CUED
Operating Range
Up to 200m between Base Station and Slave
14
Power Center- PD-3 AC Input
DC Output
Protection
Connector
Voltage Range
100~240 VAC
AC frequency
50Hz or 60Hz
Fuse Rating
6A/250VAC
Efficiency(Typ.)
Up to 80%
DC Voltage
12V / 14.4V / 18V / 25V
Voltage Tolerance
±3%
Rated Current
12V(3.5A) / 14.4V(3A) / 18V(2.5A) / 25V(1.8A)
Current Range
0~3.5A
Rated Power (Max)
AC Overload
45W / one group - 105%~150% rated output power - Protection type: Recovery automatically after fault condition is removed Non-recovery fuse on the AC input outlet
On/Off Switch
Yes (with light switch indicator)
AC In outlet with built-in fuse
AC Inlet for connecting to suitable mains power outlet – 100240VAC. The socket contains a fuse holder fitted with a 6A /250V fuse.
DC Overload
8 Groups DC OUTPUT：(PIN1:GND , PIN2/3:NC , PIN4:VCC) 8 Groups Switch, four options for each group：12V / 14.4V / Slide Switch 18V / 25V DC output LED Color Indicator：Red: 25V / White: 18V / Green: 14.4V / DC Output LED Indicator Blue: 12V 4PIN XLR Female
Misc.
Power Center- PD-2 AC Input
Protection DC Input
Outlet
1x
Voltage
100 - 240VAC
Current Rating
100 – 240VAC MAX 6.3A
Frequency
50Hz or 60Hz
AC Overload
Non-recovery fuse on the AC input outlet
DC Overload
Auto-recovery fuses on each DC output terminal
Number of Input
1x DC 12V (supports non-regulated DC 12V output)
Total Voltage
400W
DC Output
12V±5%, 4x 3A XLR DC Female Jack 12V±5%, 2x 5A XLR DC Female Jack 12V±5%, 2x 10A XLR DC Female Jack * (Two of the outputs can combine the rating to become one 12V±5%, 10A DC outputs) Sequential-On design of each DC output terminal during power on stage by 1 second duration.
Misc.
Selectable of Auto/AC input switch
15
Service & Support It is our goal to make your products ownership a satisfying experience. Our supporting staff is available to assist you in setting up and operating your system. Please refer to our web site www.datavideo-tek.com for answers to common questions, support requests or contact your local office below.
Datavideo Global Website: www.datavideo-tek.com
Datavideo Corporation Tel: +1 562 696 2324
Fax: +1 562-698-6930
E-Mail:
[email protected]
Datavideo Technologies Europe BV Tel: +31-30-261-96-56
Fax: +31-30 261-96-57
E-Mail:
[email protected]
Fax: +44 1457 850 964
E-Mail:
[email protected]
Datavideo UK Limited Tel: +44 1457 851 000
Datavideo Technologies Co., Ltd Tel: +886 2 8227 2888
Fax: +886-2-8227-2777
E-mail:
[email protected]
Datavideo Technologies China Co., Ltd Tel: +86 21-5603 6599
Fax:+86 21-5603 6770
E-mail:
[email protected]
Datavideo Technologies (S) PTE LTD Tel: +65-6749 6866
Fax: +65-6749 3266
E-mail:
[email protected]
Fax: +852-2833-9916
E-mail:
[email protected]
Fax: +33 1 60 37 67 32
E-Mail:
[email protected]
Fax: +91 120 4309121
E-Mail:
[email protected]
Datavideo HK Limited. Tel: +852 2833 1981 Datavideo France Tel: +33 1 60 37 02 46
Datavideo India Tel: +91 120 4309120
All the trademarks are the properties of their respective owners. Datavideo Technologies Co., Ltd. All rights reserved 2018
P/N: G082060638B1 16
