Preview only show first 10 pages with watermark. For full document please download

Msd-601 - Videlco Europe Limited

   EMBED


Share

Transcript

Ver.2.0.0 (140305) Digital Multi Switcher (built in scan converter ) MSD-601 RoHS MSD-601 is a Digital Multi-Switcher with 6 inputs and 1 output. This switcher has a built-in scan convertor. The MSD-601 contains 3 digital input ports (2 HDMI, 1 DVI) and 3 analog input ports (2 analog RGB, 1 analog component). Output is one channel distributed in 2 destinations (as HDMI and Cat6 output for extension). Audio signals can be input into 3 digital channels and 4 analog channels. 1 audio line input can be mixed on selected input source and output as digital and analog. Mixing level of each input can be configured separately and also output level can be adjusted. Settings can be configured over external control communication ports such as RS-232C, LAN, and Parallel. In addition, display devices connected to this product can be controlled over RS-232C and CEC using RS-232C, LAN, Cat6 output by registering external commands. Since these external commands have the wait function, contact points for power control of projectors can be changed after the cooling period. External control commands can be executed using DISPLAY POWER switch. ■ Specifications Input signals Item Video HDMI/DVI Analog Formats supported Audio Digital Analog Analog line Output Signals Video HDMI/DVI Digital signals for extension Supported formats Audio Digital Analog Extension limit of cables Digital input / Digital output Functions Procession of analog video Scan converting function Others Description Formats 3 channels VESA (PC) TMDS Single Link, HDCP, TMDS clock: 25 MHz ~ 225 MHz SDTV/HDTV HDMI Deep Color (1) / DVI 1.0 Cable equalizing function, EDID emulating function Connector: HDMI Type A (19 pin) (female) - 2, DVI-I (29-pin) (female) -1 *Analog signals of DVI-I connector unable to use 3 channels (Composite video, analog RGB and analog YPbPr recognized NTSC/PAL automatically) VESA (PC) Composite Video (VBS Signal): 1.0 V[p-p]/75 Ω SDTV/HDTV Analog RGB: 0.7 V[p-p](1.0 V[p-p] when Sync on Green)/75 Ω HS/VS TTL level, CS TTL level, Sync on Green Analog YPbPr: 1.0 V[p-p] (Y) /0.7 V[p-p] (Pb・Pr) /75 Ω EDID emulating function (Dense D-sub15 pin connector only) Connector: Dense D-Sub 15 pin (female)-2, BNC-1 NTSC/PAL VESA (PC): Dot clock 25MHz ~ 162MHz (VGA ~ WUXGA) SDTV/HDTV: 480i/480p/576i/576p/720p/1080i/1080p *WUXGA supported only with Reduced Blanking 3 channels Multi channel linear PCM up to 8 channels Sampling frequency: 32 kHz ~ 192 kHz, Quantization bits: 16 bit ~ 24 bit Reference level:-20 dBFs Max. input level: 0 dBFs Connector: HDMI Type A (19 pin) (female)-2, DVI-I (29 pin) (female)-1 *IN 1/IN 2 (HDMI) used only for digital audio. IN 3 (DVI) to be switched between analog audio L/R 4 channels Stereo L/R Unbalanced signal Input impedance: 24 kΩ, Reference level: -10 dBu Max input level: +10 dBu Connector: RCA pin jack *IN 3 to be switched between digital audio 1 channel Stereo L/R Unbalanced signal Input impedance: 24 kΩ, Reference level: -10 dBu Max input level: +10 dBu Connector: RCA pin jack 1 channel *Distributed output together with digital signals for extension TMDS Single Link, HDCP HDMI Deep Color (1) / DVI 1.0 Cable equalizing function Connector: HDMI Type A (19 pin) (female) 1channel (2) *Distributed output together with HDMI/DVI Connector: RJ-45 (3) Cable: Cat5e/6(UTP straight cable) (4) VESA (PC): VGA/SVGA/XGA/WXGA(1280x768)/WXGA(1280x800)/Quad-VGA/SXGA/ WXGA(1360x768)/WXGA(1366x768)/SXGA+/WXGA+/WXGA++/UXGA/ WSXGA+/WUXGA *WUXGA output with Reduced Blanking SDTV/HDTV: 480i/480p/576i/576p/720p/1080i/1080p 1 channel (Distributed into 2 destinations) * Sound multiplex only when HDMI is output Multi channel of linear PCM up to 8 channels Sampling frequency: 32 kHz ~ 192 kHz, quantization bits: 16 bit ~ 24 bit Reference level:-20 dBFs Max. input level: 0 dBFs Connector: HDMI Type A (19 pin) female-1, RJ-45-1 * Audio signals as same as analog audio L/R 1 channel Stereo L/R Unbalanced signal Output impedance: 75 Ω, Reference level: -10 dBu Max output level: +10 dBu This product outputs audio from analog line mixed to selected channel. * When Multi channel signals are input, this product outputs two chosen audio channels or down mixed audio. Connector: RCA pin jack Max. 10 m ~ 50 m (5) / HDMI: Max. 10 m ~ 50 m (5) Digital signals to be extended: 100 m (6) Three dimensional luminance/chrominance separation I/P conversion adjusted to motion, aspect holding function, Picture adjusting function (brightness, contrast, display position, display size) Pseudo seamless (7) Volume adjustment function (Volume of input and output ports can be set separately.) Audio mixing function (selected channel and analog line mixed) Selects pictures without switching audio(retain current audio source) Preset memory function (6 settings and startup settings) Anti-snow function (8) External control commands (32 commands), Key lock function IDK Corporation MSD-601 Ver.2.0.0 (140305) External control RS-232C Others (1). (2). (3). (4). (5). (6). (7). (8). (9). 1 channel D-Sub 9 pin (male) LAN interface 1 channel RJ-45 connector 10Base-T/100Base-TX (Auto Negotiation) Auto MDI / MDI-X PARALLEL input / TALLY output External control 1channel D-Sub37-pin connector (female) PARALELL input: Non-voltage contact (make contact) input, /TALLY output: Open collector output (DC 48 V 50 mA) Display devices controlled using commands output via RS-232C over RS-232C, LAN or Cat6 Supports standard protocols of PJLink (class1) regulated by JBMIA Power control of display devices using CEC (9) Power AC ~ 100 V - 240 V ± 10%, 50 Hz/60 Hz ±3 Hz Power consumption Around 43 Watts Dimensions 430 (W)× 44 (H)× 300 (D) mm (EIA rack 1U, not including projections) Weight 4.2 kg Temperature Operating temperature: 0 °C ~ +40 °C, Storage temperature: -20 °C ~ +80 °C Humidity Operating/Storage humidity: 20 % ~ 90 % (Non Condensing) Shipping group RS-232C cable (1.8 m), Power cord (1.8 m), Rack mount brackets, cable clamps-3 This product supports 30bit/pixel Deep Color (10bit/component). It does not support xvYCC, Lip Sync, 3D, ARC, HEC. If extending DVI mode signals with HDCP, please use HDC- RD 100-B, as OUT B of this product does not support DVI mode with HDCP. RJ-45 (HDC connector) is a connector only for extending digital video and audio signals over Cat5e/Cat6 twisted pair cables. Please use it integrated with IDK’s twisted cable receiver and do not use it for devices such as LAN devices. T568A or T568B (straight wiring). Cat6 cable recommended if transmitting over 50 m. Transmission distance depends on connected equipment. The information above is maximum transmission distance when a cable made by IDK (AWG24) is used and signals (1080p 60 Hz 24bit/pixel (8bit/component)) are transmitted (both inputs and outputs of this product). When connected equipment is not matched to this product or other makers' cables are used, video signal can be unstable or video signals cannot be output, even though transmission distance is within the information above. As some of LCD monitors do not operate stabilized, please have an evaluation before using or ask IDK. Pseudo seamless function switches up videos putting black frames or back color between them. Anti-snow function can fix snowy noise automatically that is a specific symptom of the signal having HDCP, mainly snow noise that arises during starting. Therefore, this function cannot work when snow noise has already occurred before starting or when snowy noise occurs because of bad status of transmission line. Displays that are used with this product must support CEC. Some displays cannot be controlled by this product through CEC. ■ Outside drawings DIGITAL MULTI SWITCHER DISPLAY POWER POWER SWITCHING MODE CHANNEL SELECT IN 1 IN 2 IN 3 IN 4 IN 5 IN 6 V&A OFF MSD-601 MENU /SET VIDEO ON AUDIO OFF ESC IN1 IN2 HDMI IN3 DVI-D(HDMI) IN4 IN5 IN6 R/Pr G/Y(VIDEO) B/Pb HS/CS VS OUT A HDMI OUT B LINK AUDIO IN 3 R AUDIO IN 4 L R AC 100-240V 50/60Hz (FUSE T1.6A 250V) HDMI AUDIO IN 5 L R AUDIO IN 6 L R LINE IN L R FG AUDIO OUT L R UPDATE L PARALLEL / TALLY LAN RS-232C ●Specifications subject to can be changed without prior notice. ● An attached power cord is used only for this product. Please do not use it for other uses. ●"HDMI", logotype of "HDMI", and "High-Definition Multimedia Interface" are trademarks or registered trademarks of HDMI Licensing LLC or registered trademarks in the U.S.A and other countries. ●"PJLink" is a trademark registration or an application for trademark registration in JAPAN, the United States, and other countries and regions. ●JBMIA: Japan Business Machine and Information System Industries Association. IDK Corporation MSD-601