Transcript
Fiber Optic Rack Mount Enclosures I N
S T
A
L
L
A
T
I
O
N
I N
S
T
R
U
C
T
I
O
N S
B Mount bracket
C #10 screw
Step 1. Install rack mount brackets onto the enclosure using #10 screws.
D #12 screw
Step 2. Mount to a 19” rack using #12 screws.
H Locknut
A Cable management spool K Warning label E Saddle
J Grounding lug I
PEM stud
G Circuit Identificantion label
Step 3. Install !ber saddles in slots on the front tray. Secure cable management spools on the rear using screw nuts. Apply warning and circuit identi!cation labels.
Optional: If splicing or grounding is required then install a splice tray or grounding lug. Splice tray is sold separately.
A Spool L
Tie
MPO cassettes
Note: The MPO cassettes do require more room, so the spools will need to be removed.
888-ASK-4ICC © Copyright 2014, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved.
Note: Be sure to route cable around spools and apply hook and loop ties. Add slack to allow the tray to slide out.
[email protected]
icc.com MSR-0532-RevA
Fiber Optic Rack Mount Enclosures I N
S T
A
L
L
A
T
I
O
N
I N
S
T
R
U
C
T
I
O
ICFOR204BK
ICFOR306BK
ICFOR412BK
4 panel, 2 RMS*
6 panel, 3 RMS*
12 panel, 4 RMS*
N S
*1 RMS (rack mount space) = 1.75”H 3 panel
6 panel
12 panel 4 pcs.
A
Cable management spools
4 pcs.
4 pcs.
B
Rack mount brackets
4 pcs.
4 pcs.
4 pcs.
C
#10-32 x 3/8 bracket screw
12 pcs.
12 pcs.
12 pcs.
D
#12-24 rack screws Circuit identi!cation label
4 pcs.
4 pcs.
8 pcs.
1 pc.
1 pc.
1 pc.
E F
Circuit identi!cation label hanger
2 pcs.
2 pcs.
2 pcs.
G
Plastic !ber saddles
7 pcs.
7 pcs.
7 pcs.
H
1/4-20 locknut
1 pc.
1 pc.
1 pc.
I
1/4-20 x 1/2 PEM® stud Grounding lug Warning label
1 pc. 1 pc. 1 pc.
1 pc. 1 pc. 1 pc.
1 pc. 1 pc. 1 pc.
J K L
Hook and loop ties
10 pcs.
10 pcs.
10 pcs.
M
8” plastic tie wraps
4 pcs.
4 pcs.
4 pcs.
F
E
A
T U
R E
S
A
C
B
E
D
F G K H I
A N D
J
L
M
B
E
N E
F
I
T S
I E
S
• Provides a safe and clean environment for installing !ber on racks • Slide out tray swing-down front transparent "exi-panel door • High quality material allows for strength and durability
O P T
LC HD 10G Fiber Adapter Panel ICFOPL161G • • • •
6 LC quad aqua adapters, 24 fibers
LC to LC 10G aqua adapters Metal sleeves Supports multimode
I O
N
A
L
A C
LC HD 10G Fiber MPO Cassettes ICFC24ML1G 6 LC quad aqua adapters, 24 fibers ICFC12ML1G 6 LC duplex aqua adapters, 12 fibers • LC to MPO • 10G aqua adapters • 50/125µm (OM3) • Metal sleeves • Supports multimode
888-ASK-4ICC © Copyright 2014, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved.
C
E
S
S
O
R
LC 10G Fiber Jumpers 1
ICFOJ1G6zz Simplex ICFOJ1G7zz1 Duplex • LC to LC • 50/125μm (OM3) • OFNR riser rated cable • Supports multimode
Splice Tray ICFOSTFM12 • Supports 12 fiber splices ICFOSTFM24 • Supports 24 fiber splices
Length (zz1) = 01, 02, 03, 05, 07, 10 meters
[email protected]
icc.com MSR-0532-RevA
