Preview only show first 10 pages with watermark. For full document please download

Mt500d - Challenger

   EMBED

Share

Transcript

Specifications Essential Efficient ˜ ˜ Engine EEM Electronic Engine Management Memo engine speeds – ˜ Engine Block Heater š š ˜ ˜ Right Hand Shuttle – š Transmission lever on TMC Console ˜ – Transmission lever on TMC Armrest – ˜ Cruise speeds – ˜ MT500D Transmission Power Direction Shuttle SPECIFICATION SHEET Essential Cab Operator environment Automatic Air Conditioning – š Air Suspended seat ˜ – ˜ Automatic Air Suspended seat š Super Deluxe Air Suspended seat – š Radio, MP3 - SD card slot - USB š ˜ Radio, CD - MP3 - Bluetooth - USB - Equalizer – š Telescopic, electrically adjusted heated mirrors – š TMC Display with Video and ISOBUS – š Dual Control – š One-Touch headland management – š AutoGuide ready or Full AutoGuide – š Mechanical controls of spool valves ˜ – Electrical and Mechanical controls of spool valves – ˜ Multifunction Joystick – š Loader ready tractor with Multifunction Joystick – š • Users can choose the specification to suit. For cost effective power and performance are the Essential models, while Efficient versions provide higher levels of comfort, control and extra features • Advanced six cylinder AGCO POWER™ high displacement engines are developed specifically for agricultural applications and high sulphur diesel. Engine Power Management provides a boost of up to 25hp • Robust, well proven AutoPower VI™ transmission provides superior, clutch-free changing of 24 speeds in both directions with a wide range of automatic modes to enhance efficiency and the driving experience • Superb new cab structure creates a spacious quiet and cool workplace with new Tractor Management Centre and joystick control Chassis & Hydraulics Power Beyond - P,T,LS couplers – ˜ Integrated front linkage š š Integrated front PTO š š 4WD OptiRide suspended front axle š š Electrical equipment Worklights on Handrails and rear fenders – ˜ Road lights on Handrails š š Night Breaker™ Xenon lights š š ˜ = Standard š = Optional – = Not available • Five models in the Challenger MT500D Series with powers from 150hp to 255hp (max. ISO) provide exceptional productivity and economy in a wide range of tasks from heavy draft applications through to delicate top work Efficient Cab • Exceptionally strong, lightweight chassis plays helps produce superb power to weight ratio, with a long wheel base to enhance traction and output while saving fuel • Powerful, strong three-point linkage coupled with a powerful hydraulic system and versatile PTO make the most of the MT500D’s pulling power Every effort has been made to ensure that the information contained in this publication is as accurate and current as possible. However, inaccuracies, errors or omissions may occur and details of the specifications may be changed at any time without notice. Therefore, all specifications should be confirmed with your Challenger Dealer or Distributor prior to any purchase. Visit the Challenger Site: www.challenger-ag.com or for Challenger Merchandise: www. challengerstore.com Challenger® is a registered trademark of Caterpillar Inc. and is used under licence by AGCO. © AGCO Limited. 2012 | CD5891 / 0812 • AutoGuide™ automatic steering option cuts overlaps and misses to increase productivity while saving save fuel and inputs. AGCOMMAND™ telemetry option provides comprehensive remote monitoring and fleet management. Smart Machines. Serious Results. Specifications MT525D MT545D MT565D MT585D MT595D Type AGCO POWER™ 66WI-4V 140 (103) 165 (121) 185 (136) 220 (162) Standard Optional 150 (110) 175 (129) 200 (147) 235 (173) 255 (187) 175 (129) 200 (147) 220 (162) 260 (191) 280 (206) Cat 2 Drawbar, ladder with clevis and pintle pin PTO power @ 2,100-rated rpm SAE (kW) 110 (80) 130 (95) 150 (110) 180 (132) 195 (144) PTO 660 740 880 1,030 1,049 Speed modes (rpm) - Essential 1,145 Speed modes (rpm) - Efficient 745 840 Number of cylinders / Displacement (litres) 980 1,120 6 / 6,6 6 / 7,4 340 470 AutoPower VI™ Robotised Semi Powershift – 40km/hr Category 3 Ranges Maximum lift capacity (kg) 4 Robotised Ranges / 6 Powershifts No. of gears 24 Forward x 24 Reverse 36x36 / 48x48 36x36 / - Min Speed with creeper / supercreeper 0,26 / 0,07km/hr 0,26km/hr / - Open Centre (OC) or CCLS Closed Centre Load Sensing (CCLS) 100 (OC), optional 57 (OC) or 110 (CCLS) 110, optional 150 Hydraulics Available flow rate per spool valves (L/min) 92 3 or 4 Mechanical Max No of Spool valves & controls - on Efficient version 2 Electro Hydraulic controlled by Fingertip, or optional Multifunction Joystick + 2 Mechanical Front Spool valves Up to 2 Essential: Mechanical integrated Joystick, with dedicated mid mounted spool valves Efficient: Use Electro Hydraulic spool valves and Multifunction Joystick Rear Axle Electro-hydraulic 6 / 21 splines Flanged axle Short Bar Axle - 110 x 2480 mm Full-locking, electrohydraulic Optional 3,200 3,200 / 4,000 4,000 1,920 Operator Area Noise level dB(A) 70 Operator seat - air suspension Standard Mechanical cab suspension Optional Transmission Control(s) Transmission lever on Console (Essential) or on Armrest (Efficient) or left hand Power Direction shuttle Guidance & Telemetry Systems Standard AutoGuide Ready Optional - Only Efficient Full AutoGuide from factory Optional - Only Efficient Dimensions & Weight (Weights may vary depending on specification and markets) Wheelbase (mm) 2,888 3,000 Overall Length (mm) 4,900 5,090 Overall Height - from rear axle centreline to top of the roof (mm) with fixed cab 2,110 2,193 Front Axle Approximate Shipping Weight (kg) Fixed front axle 4 wheel drive - High pivot - Standard Max. Allowable Weight (kg) Suspended front axle 4 wheel drive - High pivot - Optional Standard tyres * Manufacturer’s tests 1,900 / 1,600 / 2,000 AGCOMMAND (telemetry) Ready Max No of Spool valves & controls - on Essential version Differential lock 540 / 540eco / 1,000 - optional 540eco / 1,000 / 1,000eco Engine speed @ 1,000 front PTO speed No. of gears with creeper / supercreeper Type 540 / 1,000 540 / 1,000 Integrated Front Linkage and PTO Type Loader hydraulics & controls MT595D 9,300 Engagement Shaft type Transmission Total flow rate (litres/min) 7,100 / 8,100 Optional Engine Speed if PTO at 540 / 540eco / 1,000 rpm 192 Specific fuel consumption (g/kWh) * System type MT585D Cat 3 hook end links Maximum lift capacity (kg) – At ball ends Max ISO engine power @ 1,950 rpm (kW) Fuel tank capacity (litres) MT565D 240 (177) Max engine power with EPM Boost (kW) Maximum engine torque with EPM (Nm) MT545D Type AGCO POWER™ 74WI-4V Cat 2 SAE Drawbar Maximum ISO engine torque (Nm) @1,500 engine rpm MT525D Hitch and Linkage Engine Rated ISO engine power @ 2,100 rpm (kW) Specifications 7,000 7,200 11,500 7,800 8,000 12,500 8,100 13,000 Front 380/85R28 480/70R28 420/85R30 480/70R30 480/70R30 Rear 460/85R38 580/70R38 520/85R42 620/70R42 620/70R42 Specifications MT525D MT545D MT565D MT585D MT595D Type AGCO POWER™ 66WI-4V 140 (103) 165 (121) 185 (136) 220 (162) Standard Optional 150 (110) 175 (129) 200 (147) 235 (173) 255 (187) 175 (129) 200 (147) 220 (162) 260 (191) 280 (206) Cat 2 Drawbar, ladder with clevis and pintle pin PTO power @ 2,100-rated rpm SAE (kW) 110 (80) 130 (95) 150 (110) 180 (132) 195 (144) PTO 660 740 880 1,030 1,049 Speed modes (rpm) - Essential 1,145 Speed modes (rpm) - Efficient 745 840 Number of cylinders / Displacement (litres) 980 1,120 6 / 6,6 6 / 7,4 340 470 AutoPower VI™ Robotised Semi Powershift – 40km/hr Category 3 Ranges Maximum lift capacity (kg) 4 Robotised Ranges / 6 Powershifts No. of gears 24 Forward x 24 Reverse 36x36 / 48x48 36x36 / - Min Speed with creeper / supercreeper 0,26 / 0,07km/hr 0,26km/hr / - Open Centre (OC) or CCLS Closed Centre Load Sensing (CCLS) 100 (OC), optional 57 (OC) or 110 (CCLS) 110, optional 150 Hydraulics Available flow rate per spool valves (L/min) 92 3 or 4 Mechanical Max No of Spool valves & controls - on Efficient version 2 Electro Hydraulic controlled by Fingertip, or optional Multifunction Joystick + 2 Mechanical Front Spool valves Up to 2 Essential: Mechanical integrated Joystick, with dedicated mid mounted spool valves Efficient: Use Electro Hydraulic spool valves and Multifunction Joystick Rear Axle Electro-hydraulic 6 / 21 splines Flanged axle Short Bar Axle - 110 x 2480 mm Full-locking, electrohydraulic Optional 3,200 3,200 / 4,000 4,000 1,920 Operator Area Noise level dB(A) 70 Operator seat - air suspension Standard Mechanical cab suspension Optional Transmission Control(s) Transmission lever on Console (Essential) or on Armrest (Efficient) or left hand Power Direction shuttle Guidance & Telemetry Systems Standard AutoGuide Ready Optional - Only Efficient Full AutoGuide from factory Optional - Only Efficient Dimensions & Weight (Weights may vary depending on specification and markets) Wheelbase (mm) 2,888 3,000 Overall Length (mm) 4,900 5,090 Overall Height - from rear axle centreline to top of the roof (mm) with fixed cab 2,110 2,193 Front Axle Approximate Shipping Weight (kg) Fixed front axle 4 wheel drive - High pivot - Standard Max. Allowable Weight (kg) Suspended front axle 4 wheel drive - High pivot - Optional Standard tyres * Manufacturer’s tests 1,900 / 1,600 / 2,000 AGCOMMAND (telemetry) Ready Max No of Spool valves & controls - on Essential version Differential lock 540 / 540eco / 1,000 - optional 540eco / 1,000 / 1,000eco Engine speed @ 1,000 front PTO speed No. of gears with creeper / supercreeper Type 540 / 1,000 540 / 1,000 Integrated Front Linkage and PTO Type Loader hydraulics & controls MT595D 9,300 Engagement Shaft type Transmission Total flow rate (litres/min) 7,100 / 8,100 Optional Engine Speed if PTO at 540 / 540eco / 1,000 rpm 192 Specific fuel consumption (g/kWh) * System type MT585D Cat 3 hook end links Maximum lift capacity (kg) – At ball ends Max ISO engine power @ 1,950 rpm (kW) Fuel tank capacity (litres) MT565D 240 (177) Max engine power with EPM Boost (kW) Maximum engine torque with EPM (Nm) MT545D Type AGCO POWER™ 74WI-4V Cat 2 SAE Drawbar Maximum ISO engine torque (Nm) @1,500 engine rpm MT525D Hitch and Linkage Engine Rated ISO engine power @ 2,100 rpm (kW) Specifications 7,000 7,200 11,500 7,800 8,000 12,500 8,100 13,000 Front 380/85R28 480/70R28 420/85R30 480/70R30 480/70R30 Rear 460/85R38 580/70R38 520/85R42 620/70R42 620/70R42 Specifications Essential Efficient ˜ ˜ Engine EEM Electronic Engine Management Memo engine speeds – ˜ Engine Block Heater š š ˜ ˜ Right Hand Shuttle – š Transmission lever on TMC Console ˜ – Transmission lever on TMC Armrest – ˜ Cruise speeds – ˜ MT500D Transmission Power Direction Shuttle SPECIFICATION SHEET Essential Cab Operator environment Automatic Air Conditioning – š Air Suspended seat ˜ – ˜ Automatic Air Suspended seat š Super Deluxe Air Suspended seat – š Radio, MP3 - SD card slot - USB š ˜ Radio, CD - MP3 - Bluetooth - USB - Equalizer – š Telescopic, electrically adjusted heated mirrors – š TMC Display with Video and ISOBUS – š Dual Control – š One-Touch headland management – š AutoGuide ready or Full AutoGuide – š Mechanical controls of spool valves ˜ – Electrical and Mechanical controls of spool valves – ˜ Multifunction Joystick – š Loader ready tractor with Multifunction Joystick – š • Users can choose the specification to suit. For cost effective power and performance are the Essential models, while Efficient versions provide higher levels of comfort, control and extra features • Advanced six cylinder AGCO POWER™ high displacement engines are developed specifically for agricultural applications and high sulphur diesel. Engine Power Management provides a boost of up to 25hp • Robust, well proven AutoPower VI™ transmission provides superior, clutch-free changing of 24 speeds in both directions with a wide range of automatic modes to enhance efficiency and the driving experience • Superb new cab structure creates a spacious quiet and cool workplace with new Tractor Management Centre and joystick control Chassis & Hydraulics Power Beyond - P,T,LS couplers – ˜ Integrated front linkage š š Integrated front PTO š š 4WD OptiRide suspended front axle š š Electrical equipment Worklights on Handrails and rear fenders – ˜ Road lights on Handrails š š Night Breaker™ Xenon lights š š ˜ = Standard š = Optional – = Not available • Five models in the Challenger MT500D Series with powers from 150hp to 255hp (max. ISO) provide exceptional productivity and economy in a wide range of tasks from heavy draft applications through to delicate top work Efficient Cab • Exceptionally strong, lightweight chassis plays helps produce superb power to weight ratio, with a long wheel base to enhance traction and output while saving fuel • Powerful, strong three-point linkage coupled with a powerful hydraulic system and versatile PTO make the most of the MT500D’s pulling power Every effort has been made to ensure that the information contained in this publication is as accurate and current as possible. However, inaccuracies, errors or omissions may occur and details of the specifications may be changed at any time without notice. Therefore, all specifications should be confirmed with your Challenger Dealer or Distributor prior to any purchase. Visit the Challenger Site: www.challenger-ag.com or for Challenger Merchandise: www. challengerstore.com Challenger® is a registered trademark of Caterpillar Inc. and is used under licence by AGCO. © AGCO Limited. 2012 | CD5891 / 0812 • AutoGuide™ automatic steering option cuts overlaps and misses to increase productivity while saving save fuel and inputs. AGCOMMAND™ telemetry option provides comprehensive remote monitoring and fleet management. Smart Machines. Serious Results.