Preview only show first 10 pages with watermark. For full document please download

Mule 610 4x4 Xc 14_mule610xc_en_

   EMBED


Share

Transcript

2014 MULE ™ 610 4x4 XC SIDE X SIDE UTILITY After more than 20 years of service, the Mule name has come to define a whole category of hardworking utility vehicles. Nicknamed the “Bigfoot” MULE, the MULE 610 4x4 XC features enhanced off-road capability – with larger, 26” tires and 12” wheels – and a slew of features designed to complement its newfound off-road ability. CAMOUFLAGE REALTREE APG † 1 1 Fully independent suspension, great for handling uneven terrain. 5 2 26-inch Maxxis Bighorn 2.0 radial tires mounted on 12-inch wheels result in a wider track, enhancing ride stability. Limited slip differential provides great traction with low steering effort. 3 High torque engine perfect for a variety of utility and leisure applications. 4 First vehicle in its class to offer selectable 2WD/4WD. 2 3 4 5 Tilting cargo bed makes unloading easy. Longer front and rear suspension arms provide greater off-road performance. Larger tires give you 1.5“ more ground clearance – now 8.0” – for improved rough terrain capabilities. For more information visit www.kawasaki.ca/14mule6104x4xc 2014 MULE™ 610 4x4 XC SIDE X SIDE UTILITY SUPER BLACK/ VIBRANT BLUE Engine type 4-stroke, air-cooled, Single, OHV Displacement 401cc Bore x stroke 82.0 x 76.0 mm Compression ratio 8.6:1 Carburetion Nikki 6C1026 carburettor Air filter Snorkel-type with 2-stage dry replaceable element Oil filter Automotive-type spin-on canister Ignition Magneto & transistor Take an in-depth tour @ kawasaki.ca/ 14mule6104x4xc View our complete accessory catalogue @ kawasaki.ca/accessories Electrical 12-volt DC; 14-amp hour battery, 17-amp alternator Drive train Kawasaki Automatic Power Drive System (KAPS): high/low forward, neutral, reverse Final drive Gear (selectable 2WD/4WD) with limited slip front differential and dual-mode locking rear differential SUPER BLACK Exhaust Muffler with USFS-approved spark arrestor Special Edition Tire, front /rear AT26 x 9R-12 (Maxxis) Suspension, front Independent, MacPherson strut ACCESSORIES Cab Structures Suspension, rear Unit swing axle, coilover shocks with stepped preload 1 Wheel travel, front/rear 78/79 mm (3.1/3.1 in.) Steering Rack and pinion Tonneau Covers Bed Liners EXTEND YOUR FACTORY PROTECTION Brakes Sealed, four wheel auto adjusting hydraulic drums Skid Plates Fuel capacity 15.5 litres (3.4 gal.) Hard Top Curb mass* 477 kg (1,052 lbs.) Camouflage: 485 kg (1,069 lb) Dimensions (LxWxH) 2755 x 1320 x 1875 mm (108.5 x 52 x 73.8 in.) 2 Kawasaki subscribes to the guidelines of Tread Lightly!, a program dedicated to protecting the great outdoors through education and fostering responsible enjoyment of public lands. 3 Wheelbase 1780 mm (70.0 in.) Ground clearance 205 mm (8.0 in.) ALL 2014 MULE MODELS ARE APPROVED FOR ROLL OVER PROTECTION SYSTEM (ROPS). The structure meets ROPS requirements for wheeled tractors under SAE J1194, 7.1.1, 7.1.2, 7.4 and 7.5. The structure also meets the FMVSS 216 Roof Crush resistance requirement. Cargo bed (LxWxH) 1044 x 900 x 245 mm (41.1 x 35.4 x 9.7 in.) Vehicle load capacity 420 kg (926 lbs.) (including occupants & cargo) 5 Cargo bed load capacity 181 kg (400 lbs.) Towing capacity 500 kg (1,100 lbs.) 4 Turning radius 3.6 m (11.8 ft.) (differential unlocked) Top speed 40 km/h (25 mph) governed KAWASAKI CARES Lights Dual 12V, 35/5W Always wear protective gear appropriate for the use of this vehicle. Never operate under the influence of drugs or alcohol. Protect the environment. The Kawasaki MULE™ utility vehicle is an off-highway vehicle only, and is not designed, equipped, or manufactured for use on public streets; roads or highways. Obey the laws and regulations that control the use of your vehicle. Colour Super Black/Vibrant Blue or Camouflage Realtree APG or Super Black (Special Edition) † Canadian model may not be exactly as shown. Warranty 12 months * Includes all necessary materials and fluids to operate correctly, full tank of fuel (more than 90% of capacity) and tool kit (if supplied) The specifications mentioned here apply to and have been achieved by production models under standard operating conditions. We intend only to give a fair description of the vehicle and its performance capabilities but these specifications may not apply to every machine supplied for sale. Kawasaki Heavy Industries, Ltd. reserves the right to alter specifications without prior notice. Equipment illustrated and specifications may vary to meet individual markets. Available colours may vary by market. 99969-2939E