Transcript
Multi Purpose Dash Camera User Guide
Important Information Please Read Before Use! • Safety Warnings: Do not operate the product while you are operating the vehicle, as it may cause accidents. Please park your car in a safe place before operating the product. • Motorists, as well as operators of emergency or service vehicles, are expected to exercise all due caution using this product, and to obey all applicable traffic laws. • Security of Your Vehicle: Before leaving your vehicle, always remember to conceal this device in order to reduce the possibility of break-in and theft. • Privacy Warnings: This product may not be used to violate the privacy rights of others. In no way will Green Collections/ Ojocam be responsible for inappropriate or illegal use of this product. It is the sole responsibility of the buyer to consult legal counsel for the interpretation of any laws applicable to the area of intended use of this product. • Avoid exposing this product to dusty, dirty, or sandy areas to reduce the risk of damaging components. • Do not disassemble or modify the product. Doing so may lead to electric shock from the high-pressure internal components. • Do not drop or otherwise inflict impact on the product. Impact may damage internal components. • Do not clean the product with chemicals, cleaning solution, or high-concentration detergent. Clean it gently with a soft, slightly damp cloth.
| English
Table of Contents Package Contents ...................................................... 2 - 3 Installation ....................................................................... 4 Operation .................................................................... 5 - 8 Insert SD Card ............................................................. 5 Charging the Device ................................................... 5 Dash Cam Mode vs. Action Cam Mode ..................... 6 To Start Recording ...................................................... 7 To Start / Cancel Emergency Recording ...................... 7 To Enable / Disable Audio Recording ........................ 8 To Power Off Device .................................................. 8 Video Playback ........................................................... 8 Menu Settings .................................................................. 9 Connect to a Computer / TV .......................................... 10 Transfer files to PC ................................................... 10 WiFi Feature & Smartphone App .................................. 11 Local .................................................................. 12 - 15 Internet ...................................................................... 16 Internet Setup ................................................................. 17 Motion Detector / G-Sensor Setting .............................. 18 Technical Speifications .................................................. 19 Troubleshooting ............................................................. 20 Customer Service ........................................................... 21 English | 1
Package Contents
Package Contents
• Micro USB Cable (12 feet power only)
GPS Receiver Slot Lens
• Dash Cam (OC-0900)
Micro HDMI Port Speaker • Micro USB Cable (1 foot)
• Suction Cup Mount • Lanyard
• Lanyard Mount
Tripod Connector Mic Status Indicator
• Cigarette Lighter Adapter
• Tripod Connector
LCD Panel
Micro SD Card Slot
Power/Menu Button Record Button
16GB
MICR O
SD
Micro USB Port
Emergency Button
• 16GB Micro SD Card (optional) • User Guide
2 | English
English | 3
Installation
Operation
Mounting the Device
Inserting a MicroSD Card
To achieve optimal performance from your camera, we recommend mounting on the front of the windshield, behind the rearview mirror. This will minimize the impact on the drivers’ line of sight. You will also need to keep the camera centered, and angle the bracket to optimize the camera’s view.
Mounting Steps: 1. Peel the plastic film off the suction cup.
2. Screw the tripod connector onto the base of the suction cup mount.
3. Slide the dash cam onto the tripod connector.
Before initial use, insert a microSD card, as shown in the picture (suggested at least 4GB, up to 64GB). Press it in until you hear a click. To remove the memory card, push the memory card forward gently until you hear a click. The card should release.
microSD card
Micro SD Card Setup When SD card is used for the first time, or is reformatted in camera, user should allocate memory for Action Cam Mode and Dash Cam Mode.
4. Turn on the camera, loosen the angle locking ring and adjust the angle.
5. Press the suction cup firmly onto the windshield.
6. Push down the lever to lock the suction cup in place.
Go to [Setup] [ Camcorder Settings] Adjust slide bar and press [Format] button to complete SD card setup.
Charging the Unit
7. Plug the 12 foot Micro USB cable into the camera.
4 | English
8. Plug the power cord into the cigarette lighter adaptor.
9. Do a test drive and make sure the camera is recording.
Fully charge camera for initial use by: • Car charger • PC USB port • USB adapter (not included) During charging, when the camera is on, screen shows battery icon or status indicator flashes in orange. When camcorder is fully charged, the indicator turns off.
English | 5
Operation
Operation
Dash Cam Mode vs. Action Cam Mode
Operation
Ojocam 0900 has two recording modes for different applications: Action Cam: Shoot normal videos. Dash Cam: Continuous loop and emergency videos. Comparison between modes: Mode Record type Record trigger
Video Clip File Size Display info.
Action Cam
Dash Cam
Normal Press
Loop in preview Three min. sections
Up to 2 GB 00:06:36 SD card remaining time
Emergency • Car impact (G-Sensor) during • Press loop recording One min. section (30 seconds before and after the event)
2014/01/01 21:06:36 Current date & time
To Start Recording: 1. Power on: to turn on camcorder. Press 2. Record: to start recording. Press Press again to stop. Press
to enter menu settings.
to select [Playback ]. Press Press [Play ] to play the video and press [
] to stop.
4. Return to preview: ] to return. Press [ 5. Power off: for 2 seconds. Press and hold While in recording mode, press To Cancel an Emergency Recording: While in an emergency recording,
• During loop recording, press
to enable/disable audio recording.
• By default, the camera allocates 50% of the microSD card’s memory for Action Cam Mode, and 50% for Dash Cam Mode. This allocation can be adjusted via the settings in the OjoLink smartphone app.
6 | English
REC
3. Playback:
To Start an Emergency Recording:
Note: • Loop recording: Once the memory card is full, the camera will continously overwrite the oldest footage recorded.
Visual Display The camera turns on with live video shown, REC flashes in red while recording.
press
, then
The ! icon flashes on the top of the bar and displays a progress percentage of the locked file being saved. The emergency mode will be stopped and return to normal recording mode.
to confirm.
Note: In Dash Cam Mode, the device will power off when power is disconnected from the unit. A delay in powering off can be specified in the “delay power off” setting in the OjoLink smartphone app.
English | 7
Operation
Menu Settings
To Enable/Disable Microphone while Recording: Press
to turn audio recording on/off
To Power the Device Off: Press and hold
The microphone icon indicates microphone is disabled; otherwise, the audio recording is active.
Playback
Play recorded videos
Action Cam Dash Cam
Switch between Action Cam Mode and Dash Cam Mode
WiFi - Local
Enable/Disable WiFi for wireless connection
WiFi - Cloud
Enable/Disable internet cloud connection
Voice Record
Enable/Disable voice recording (Dash Cam Mode only)
Auto Record
Enable/Disable auto recording when car engine starts (Dash Cam Mode only)
Screen Auto Off
Screen turns off after 60 seconds of nonoperation (Dash Cam Mode only)
Settings
Reset to factory default settings or format SD card.
for 2 second.
to bring up the main menu.
Select
and use buttons to view
Action Cam Dash Cam
The main menu will appera. The playback sceen will appear.
or files.
Using the Playback screen Delete Video Play Video
Descriptions
The device will power off.
Video Playback: If you're currently recording video, you needed to stop recording video to enable playback. Press
Menu Settings
Next Video
Previous Video Back
Note: After 10 seconds of non-operation in menu settings, screen returns to preview.
Ojocam 0900 has eight menu settings. Advanced settings can be set up via OjoLink smartphone APP. In preview, press to enter menu settings. Button functions indicated by . Use navigate menu settings, and
8 | English
to
to go back to preview. English | 9
Connect to a Computer / TV
WiFi Feature & Smartphone App
Connect the camera to a computer
The WiFi feature allows OC-0900 to be accessed from your smartphone, including live view, camera configuration, upload and share videos. Before connecting to wirless for the first time, download and install OjoLink smartphone app from either the Apple App Store or Google Play store. OjoLink has two functions: (1) Local - Direct control (2) Internet - Internet live view
Connect the camera to a computer using the USB to Micro-USB cable (included). By default, your device connects to your PC in Mass Storage mode, and acts like a flash drive. Videos are stored in the MP4 format. These files can be opened with the video player that came with your operating system, or with many third party video players. Videos that are locked are saved in the “Emergency” folder; videos that are not locked are saved in the “DCIM” folder. Note: In Dash Cam Mode, once the memory card gets full, videos that are not locked will be overwritten by the new videos. If you want to save any videos in the DCIM folder, you should copy them to your computer.
(1)
Connect the camera to a TV
The camera can be connected to a HDTV via a Micro HDMI to HDMI cable (not included). The camera screen will be mirrored on the TV screen. 1. Connect Ojocam 0900 to TV via Micro HDMI cable (not included). 2. Turn on camera. 3. Camera screen is mirrored on TV.
OjoLink
Smartphone connects to camera directly via WiFi for remote control, live view, album management and camera setup.
Transfer Files to PC:
1. Connect camera to PC via Micro USB cable. 2. Find video at "My computer\Removable Disk\". 3. Copy, move, delete, and playback videos on PC.
【Local】
(2)
【Internet】
Smartphone
Ojocam 0900
Smartphone connects to cloud server to view live videos uploaded from internet remote camera. Wireless Router
Smartphone
Cloud Server
3G/4G Wireless Router
Ojocam 0900
3G/4G Mobile Hotspot
10 | English
English | 11
WiFi Feature & Smartphone App
WiFi Feature & Smartphone App 4.【Local】function has three function pages: View, Album and Setup.
【Local】Function Before using OjoLink App's【Local】function, ensure camera WiFi is on and the Cloud setting is off. Once WiFi is ready, preview shows camera name (R2-xxxxxxxx) in a few seconds.
View Page Items
Mobile Connects to Camera
Shoot videos or Take photos and files are saved into smartphone "Album\OjoLink\" (Record video and save video into smartphone only)
1. For Android: Turn on [Wi-Fi]. For iOS: Go to [Settings] [Wi-Fi]. Turn on [Wi-Fi] . Select the camera WiFi (R2-xxxxxxxx). 2. Run [Ojocam Link]. 3. Tap【Local】and select the smartphone app to enter【Local】View Page. Tap [ ] to scan again if camera is not found.
Descriptions Shoot videos and files are saved onto microSD card (Record video using camera )
To connect multiple cameras: • Enable Quad-View for multiple live view on smartphone • In Quad-View, select a window for single view. Flip image One way talk (Smartphone to camera)
Album Page Folders
Descriptions View or delete video files recorded in action cam mode View or delete video files recorded in dash cam mode
Setup Page Groups
iOS Settings
Local Main Page
Local View Page
Note: • Smartphone cannot connect to camera while camera is recording. • For first time use, password is not required. User can set camera password in the Setup menu.
12 | English
Descriptions
Camera Settings
Edit name, password, format SD card, resolution etc.
Internet Settings (Cloud)
Edit Email and AP to connect to cloud server. (For internet cloud server connection)
Dashcam Settings
Set motion detector, impact sensor, etc.
Note: 1. In Setup Page, tap [Save] to save settings. 2. Smartphone vedio player may not support SuperHD resolution (1296P).
English | 13
Smartphone App Feature Camera Name Date and Time Resolution
To rename the camera and set a password
Operation Sound Factory Settings Format SD Card
Toggle the dash cam’s button beep on/off
Language
Choose your preferred language for Ojocam 0900
Internet Setting
Here you can register a free cloud account so you can access your camera from your smartphone from any where in the world.
Voice Record
If you do not want the camera to record the audio with its internal microphone, turn this setting off. (Dash Cam mode only)
Auto Record
If this setting is enabled, the camera will automatically start recording when it receives power from the car charger . (Dash Cam mode only) If this setting is enabled, the camera will automatically start recording if it detected movement in view of the camera. Video recording stops when there is no movement.
Screen Auto Off
Synchronize time between smartphone and camera Recording Resolution: FHD is the default value and records in 1080P Full HD. SHD is 1296P Super HD, which provides 3MP playback video. Note that some smartphone don't support 1296P.
Reset camera to factory settings. This videos on the Micro SD card remains intact. Here you can fully erase the video on your SD card, and adjust how much space you want to make available to loop recording in Dash Cam mode. Drag the slider from left to right to set the ratio.
Delay Power Off
Here you can set delay time after power is removed. Select 10 second delay or immediately off.
Impact Sensor
Sets the sensitivity of the impact sensor (G-Sensor). Options include High, Low, and Off. The impact sensor, when triggered, will automatically lock files to prevent them from being automatically detected by continuous loop recording.
14 | English
Cloud Mode Feature To configure Cloud Mode 1. Connect your camera to the smartphone App by using the Local Mode (page 12) 2. Inside the smartphone app, tap on the setup tab at the bottom, and scroll down to “Internet Setting” 3. Using Access Point (AP) tap the button labeled “Click here to Add Cloud AP” 4. Tap WiFi name from the list. If your home network does not show up in the list, tap “other” and enter WiFi name (SSID) and password manually. 5. Tap the “Setup” button in the upper left to go back to setup 6. In the Email Box, Enter your email address. This is needed to help protect your privacy, so only you can access your camera over the cloud. 7. Tap the Green save button and hit OK 8. Exit the smartphone app, and your camera should return to the video preview screen. 9. Turn on the WiFi loud in the Main Menu settings of the camera. 10. After you exit the settings, the camera will show the video preview screen with a green cloud icon in the upper left corner. 11. Make sure your smartphone is now connected to the internet, via the cellular network or via WiFi. 12. Open the OjoLink app, and tap on the Cloud Icon that says “Internet” 13. The camera WiFi ID will appear in the list. The camera's live video will be displayed in a short while. English | 15
Cloud Mode Settings
Cloud and Internet Settings
Camera Cloud Mode Setup Before using internet cloud service, Email and AP needs to be properly set up. 1. Go to [Setup] [ Internet Settings] Edit Email and AP
【Internet】Function Before using OjoLink/Unieye Drive's【Internet】function, ensure camera setup has been completed.
To Connect to Cloud Server Enable [Cloud ] in camera menu to upload streaming video to cloud server. Connection status will be shown on screen.
2. Tap [Save] to complete Email & AP settings.
Status Note: AP (Access Point) can be • Wireless Router or • 3G/4G Mobile Wireless Router or • 3G/4G Mobile Hotspot
Wireless Router
3G/4G Mobile Wireless Router
Descriptions Connection successful. Preview shows [ camera ID.
] and
Login fail: • Invalid AP name or password • Weak WiFi signal or not in WiFi range
3G/4G Mobile Hotspot
Connection fail: • No internet or cloud server is not accessible • Blocked by some firewall
Remote Internet Live View 1. Connect smartphone to internet (via WiFi, 3G/4G). 2. Run [OjoLink] and tap【Internet】. 3. For adding camcorder or using another ] Enter the camera smartphone, tap [ ID and password. 4. Tap camera ID/name to view internet live videos.
16 | English
【Internet】 Mode English | 17
Motion Detector / G-Sensor Settings Motion Detector Setup With the setting enabled, the camera will automactically start recording if motion is detected in the view of the camera. Video recording will stop when there is no movement. 1. Go to APP [Setup] [ Car DVR Settings] Turn on [Motion Detector] Tap [Save]. 2. Press [Home] to exit the setup menu. 3.
will show on screen (Dash Cam Mode only).
4. When power supply turns off or the power cord is disconnected from the camera. [Motion Detector] will pop up Press V to manually activate [Motion Detector] , otherwise [Motion Detector] will automatically activate after 10 seconds Choose X to cancel [Motion Detector].
Technical Specification Model Name Resolution Image Sensor Lens Visual Angle LCD Wireless Compliant Wireless Modes Live Preview in Mobile GPS G Sensor Storage Media Interface Battery Capacity Dimensions
OC-0900 1296P/1080P/30FPS 3 Megapixels Aperture F2.4 160º 2.0" LCD IEEE802.11 b/g Local Mode / Internet Mode WQVGA External GPS Receiver (Optional) 3-Axis G-Force Sensor Micro SD/SDHC/SDXC (Up to 64GB) Micro USB, Micro HDMI 700mAh 1.99 x 2.48 x 0.77 inches (50.5 x 63 x 19.5 mm)
G-Sensor Setup Enable G-Sensor to automatically record viedo when impacts are detcted. Go to APP [Setup] [ Car DVR Settings] Select [G-Sensor], [H]/[L] Tap [Save]. Note : [H] High sensitivity. [L] Low sensitivity.
18 | English
English | 19
Troubleshooting Situation
Note / Customer Service Cause/Solution
Camera cannot turn on • The battery is low, recharge battery Camera is frozen
• Press and hold shutdown; press
Camera cannot record
• No microSD card or microSD card is full (Action Cam Mode). • microSD card cannot be recognized • Format microSD card or replace microSD card
button for 5 seconds to force again to turn on the camera.
• Invalid AP name or password Camera cannot connect • Weak WiFi signal or not in WiFi coverage • Check the internet connection. to AP or cloud server • Connection may be blocked by a firewall Smartphone cannot find camera 【Local】
Smartphone cannot watch live view 【Local】 Smartphone cannot connect to cloud server 【Internet】 Smartphone cannot watch live view 【Internet】 Forget camera password
20 | English
• Camera WiFi is disabled or not in WiFi coverage • Smartphone WiFi is disabled • For iOS users, camera WiFi ID is not selected in WiFi settings. • Tap [Refresh] button on [OjoLink App] • Wait 1-2 minutes for WiFi connection fully established. • Restart both the smartphone and camera and try again. • Weak WiFi signal • Camera is recording • Camera is connected to another smartphone. • Check mobile 3G/4G or WiFi internet connection • The internet bandwidth is insufficient for camera to stream live video. • Enter camera settings menu and select [Settings] [Factory Reset] to reset to default.
Ojocam Customer Service www.ojocam.com Toll Free 1-855-ojocam5 (1-855-656-2265) International 1-626-236-2256 English | 21
Green Collections LLC Toll Free 1-855-ojocam5 International 1-626-236-2256 www.ojocam.com
Printed in China.
Multi Purpose Dash Camera User Guide
Version 2014.10
