Multi Tuner V2 Installation And Setup Guide

Transcript

Product Specifications Multi Tuner V2 Installation and Setup Guide Feature Description Tuners Two independent AM/FM tuners. One expansion slot. AM Antenna Input 300 Ohm twin-lead spring terminals for stripped wire. Antenna shared between Tuners 1 and 2. FM Antenna Input 75 Ohm coax female “F” connector. Antenna shared between Tuners 1 and 2. XM Antenna Input (available with C4-XMOD model only) XM Antenna Input. XM Radio has been granted Part II type approval for this receiver. Outputs L/R line-level Audio Output on RCA connectors per tuner. SPDIF Digital Coax per tuner. Features and Benefits • Triple tuning capability—Sends out up to three audio signals, including two AM/FM signals and an optional XM® satellite radio signal. An XM antenna is supplied and required with the optional XM module. • Multi zone versatility—Handles a family’s radio needs simultaneously with one component. • XM option available—Subscribes to 150+ channels of satellite radio. Features include: • Over 150 channels coast-to-coast • All music channels 100 percent commercial-free • Music, news, talk, sports and entertainment • Digital quality audio • Many commercial-free channels XM requires a monthly subscription from XM Satellite Radio. To subscribe, contact XM at www.xmradio.com or at 1-800-XMRADIO (800-967-2346). • Data rich—Incorporates RDS support for FM, the Multi Tuner V2 can display any station-specific or media-specific information supported by the radio station, such as station name, artist name, or song title. • Compact rack size—Rack-mountable component integrates easily with other audio equipment. • Control4 network integration—Provides immediate control and easy updates through supported user interfaces (Control4 keypads, touch screens, and on-screen menus). • Single point of control—Controls up to three separate radio streams using one simple LCD interface. FM Performance Supported Models • • C4-TUN2-E-B Multi Tuner V2 C4-XMOD Optional XM Module (ships separately) Box Contents • • • Control4 Multi Tuner V2 AC Power Cable Multi Tuner V2 Installation and Setup Guide (this document) Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. Read and keep these instructions. Heed all warnings and follow all instructions for this product in this and other Control4® documents included with or related to this product. Improper use of this product may result in potential electric shock. Do not use this product near water. Never spill liquid of any kind on this product. Clean this product only with a damp or dry cloth. Do not use liquid cleaners or aerosol cleaners to clean the product. Install this product according to the manufacturer’s instructions. Install this product according to the National Electrical Code ANSI/NFPA 70 and the prevailing local codes and requirements. This product is designed for IT power systems with phase-to-phase voltage 120V, 240V, or 277V. This product should be operated with the type of power indicated on the marked label. If you are not sure of the type of power available, consult your Control4 dealer or local power company. Slots and openings on a cabinet rack, and components used with this product are provided for ventilation, reliable operation, and protection from overheating of the product. These slots and openings must not be blocked or covered. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. Never push objects of any kind into this product through cabinet slots because they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Only use the attachments and accessories included with this product or recommended by Control4. Do not allow anything to rest on the power cord. Do not install or place this product where people will walk on the cord. Do not use extension cords with any products in a Control4 system. If applicable, unplug this product during lightning storms or when unused for long periods of time. This product must be installed by qualified professionals only. Do not attempt to service this product yourself except as noted in this guide. Opening or removing covers of internal components may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged or frayed in any way; for example, a power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into this product, this product has been exposed to rain or moisture, this product does not operate normally, or this product has been dropped. Home Network Requirements Ensure that your home network solution is in place before starting your system setup. The multi tuner can be controlled through Ethernet. Antenna Requirements: • • Ensure that a proper AM/FM antenna is installed before beginning your system setup. For XM systems, install the XM antenna before beginning your system setup. Tuning Range 76.0 MHz - 108.0 MHz Sensitivity (50 ohm) 2.2 mV EMF AM Suppression 50 dB Audio Stereo Separation 25 dB Audio THD (1 Khz) < 0.5% AM Performance Front and Rear Panel Descriptions Back Panel (Model C4-TUN2-E_B with C4-XMOD Option Installed) 1 2 3 5 4 7 8 9 6 1 AC Power Inlet—for supplied power cord only. 2 FM Antenna port—for FM radio reception. 3 AM Antenna port—for AM radio reception. 4 Ethernet port—RJ-45 for a 10/100 BaseT Ethernet connection. 5 AM/FM Audio Out ports—RCA style Left and Right line-level analog audio out to connect to an audio amplifier. 6 SPDIF Coax Digital Audio Out ports—for digital audio out to connect to an audio amplifier. Tuning Range 149 – 23000 Khz Sensitivity 38 mV EMF Audio S/N 56 dB Audio THD (1 Khz) < 0.5% 7 XM Antenna port—for XM satellite radio reception. THD (1 kHz) 0.7 % 8 SIgnal-to-Noise Ratio 50 dB XM Audio Out ports—RCA style for left and right analog line-level out for connection to an audio amplifier. XM Performance (C4-XMOD only) Depends on XM subscription and your area. 9 XM SPDIF Coax Digital Audio Output. Display 4-line LED backlit LCD Communications IEEE 802.3 10/100 Ethernet, RJ-45 jack Power Requirements 115/230 VAC, 60/50 Hz, 5 Watt Maximum, 0.05A Dimensions H x W x D: 3.5” x 17.0” x 15.9” (89 x 432 x 404 mm) Weight: C4-TUN2-E-B (with 2 AM/FM tuners only) Weight: 9.9 lbs. (4.50 kg) Shipping Weight: 13.75 lbs. (6.25 kg) Front Panel 1 2 3 Install the Multi Tuner V2 1 Plan your Audio Out connections: You can connect to up to three amplifiers, audio switches, or receivers/pre-amp. Buttons—Provides access to menu options displayed on the LCD. 2 Set the Multi Tuner V2 in an A/V rack or another installation location. Select Dial—Scroll through list items and options displayed on the LCD or make selections. Also used during setup to ID device. 3 Connect the Multi Tuner V2 audio outputs: Connect to your amplifier, audio switch, or receiver audio inputs using audio cables. 4 Connect the antennas required to support the connected output devices. • AM Antenna: AM loop antenna • FM Antenna: F-type coaxial, 75 ohm impedance • XM Antenna: XM antenna 5 Connect to the Network: • Ethernet: Plug the data cable from the home network connection into the Multi Tuner V2 RJ-45 port (labeled “Ethernet”) and the network port on your wall or at the network switch. 6 Connect to Power: The power cord provided to the back of the Multi Tuner V2 and to the power outlet. Once the power cord is connected, the Multi Tuner V2 will power up. 1 Front Display (LCD)—Displays current tuner settings and LCD menus. 2 3 Back Panel (Model C4-TUN2-E_B) 1 WARNING! Do not expose the apparatus to dripping or splashing. Do not place objects filled with liquids near the apparatus. 2 3 4 AVERTISSEMENT ! N’exposez pas l’appareil à l’égoutture ou à l’éclaboussement. Ne placez pas les objets remplis de liquides près de l’appareil. WARNING! Setzen Sie den Apparat nicht Bratenfett oder dem Spritzen aus. Setzen Sie nicht die Gegenstände, die mit Flüssigkeiten nahe dem Apparat gefüllt werden. WARNING! To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture. 5 AVERTISSEMENT ! Pour réduire le risque du feu ou de choc électrique, n’exposez pas cet appareil à la pluie ou à l’humidité. WARNING! Um die Gefahr des Feuers oder des elektrischen Schlages zu verringern, setzen Sie diesen Apparat nicht Regen oder Feuchtigkeit aus. IMPORTANT! Using this product in a manner other than outlined in this document voids your warranty. Further, Control4 is NOT liable for any damage incurred with the misuse of this product. See “Limited 2 Year Warranty.” IMPORTANT ! Employer ce produit en quelque sorte autre que décrit dans ce document vide votre garantie. De plus, Control4 n’est pas responsable d’aucun dommage encouru avec l’abus de ce produit. Voyez que « a limité la garantie de 2 ans. » WICHTIG! Das Verwenden dieses Produktes in gewissem Sinne anders als umrissen in diesem Dokument hebt Ihre Garantie auf. Weiter ist Control4 NICHT für irgendeine Beschädigung verantwortlich, die mit der Fehlanwendung dieses Produktes genommen wird. Sehen Sie, daß „begrenzte eine 2 Jahr-Garantie.“ WARNING! This CLASS I apparatus must be connected to an AC mains socket outlet that has a protective earthing connection (i.e., third-prong ground conductor). DO NOT DEFEAT THE PROTECTIVE EARTHING CONNECTION! AVERTISSEMENT ! Cet appareillage de la CLASSE I doit être relié à une sortie de douille de forces à C.A. qui a un raccordement de mise à la terre protecteur (c.-à-d., conducteur rectifié parfourche). NE DÉFAITES PAS LE RACCORDEMENT DE MISE À LA TERRE PROTECTEUR! WARNING! Dieser Apparat der KATEGORIE I muss an einen WechselstromHauptleitungseinfaßungsanschluß angeschlossen werden, der einen schützenden Erdunganschluß hat (d.h., Drittzinke geriebenen Leiter). BESIEGEN SIE NICHT DEN SCHÜTZENDEN ERDUNG-ANSCHLUSS! 6 1 AC Power Inlet—for supplied power cord only. 2 FM Antenna port—for FM radio reception. 3 AM Antenna port—for AM radio reception. 4 Ethernet port—RJ-45 for a 10/100 BaseT Ethernet connection. 5 AM/FM Audio Out ports—RCA style Left and Right line-level analog audio out to connect to an audio amplifier. 6 SPDIF Coax Digital Audio Out ports—for digital audio out to connect to an audio amplifier. About the Main Menu When you first power up the Multi Tuner V2, the following System Status screen appears momentarily (similar to the one on the right). The System Status screen is then replaced by the Multi Tuner V2 main menu (shown in the screen to the right). • Tun1—Choose this to manually change a setting on Tuner 1, an AM/FM Tuner. Tun2—Choose this to manually change a setting on Tuner 2, an AM/FM Tuner. XM—Displays only when C4-XMOD is used. Choose this to manually change a setting on the XM Tuner. Setup—Choose this to access the Settings menu. • • • Activate the XM Satellite Radio Service Tuners upgraded with the XM Module Kit require a monthly subscription to the XM Satellite Radio service in order to receive XM radio channels. To subscribe and activate these services: 1 Use the Select Dial to tune the XM tuner to channel 0 and record the XM Radio ID (SDARS ID) that displays in the LCD window. 2 Contact XM Satellite Radio Inc. to subscribe to the XM radio service (see the next section for details). When instructed to do so by XM Satellite Radio Inc., tune the XM tuner to Channel 1 for about 20 minutes. When the tuner begins receiving XM stations, the LCD screen is enriched with station-specific information. 3 4 If the XM tuner is not receiving XM stations after 20 minutes: a b c Move your antenna to a new location. Go to http://www.xmradio.com/refresh/ Tune to Channel 1 again and wait approximately 20 minutes for the LCD screen to refresh. Product Specifications Multi Tuner V2 Installation and Setup Guide Feature Description Tuners Two independent AM/FM tuners. One expansion slot. AM Antenna Input 300 Ohm twin-lead spring terminals for stripped wire. Antenna shared between Tuners 1 and 2. FM Antenna Input 75 Ohm coax female “F” connector. Antenna shared between Tuners 1 and 2. XM Antenna Input (available with C4-XMOD model only) XM Antenna Input. XM Radio has been granted Part II type approval for this receiver. Outputs L/R line-level Audio Output on RCA connectors per tuner. SPDIF Digital Coax per tuner. Features and Benefits • Triple tuning capability—Sends out up to three audio signals, including two AM/FM signals and an optional XM® satellite radio signal. An XM antenna is supplied and required with the optional XM module. • Multi zone versatility—Handles a family’s radio needs simultaneously with one component. • XM option available—Subscribes to 150+ channels of satellite radio. Features include: • Over 150 channels coast-to-coast • All music channels 100 percent commercial-free • Music, news, talk, sports and entertainment • Digital quality audio • Many commercial-free channels XM requires a monthly subscription from XM Satellite Radio. To subscribe, contact XM at www.xmradio.com or at 1-800-XMRADIO (800-967-2346). • Data rich—Incorporates RDS support for FM, the Multi Tuner V2 can display any station-specific or media-specific information supported by the radio station, such as station name, artist name, or song title. • Compact rack size—Rack-mountable component integrates easily with other audio equipment. • Control4 network integration—Provides immediate control and easy updates through supported user interfaces (Control4 keypads, touch screens, and on-screen menus). • Single point of control—Controls up to three separate radio streams using one simple LCD interface. FM Performance Supported Models • • C4-TUN2-E-B Multi Tuner V2 C4-XMOD Optional XM Module (ships separately) Box Contents • • • Control4 Multi Tuner V2 AC Power Cable Multi Tuner V2 Installation and Setup Guide (this document) Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. Read and keep these instructions. Heed all warnings and follow all instructions for this product in this and other Control4® documents included with or related to this product. Improper use of this product may result in potential electric shock. Do not use this product near water. Never spill liquid of any kind on this product. Clean this product only with a damp or dry cloth. Do not use liquid cleaners or aerosol cleaners to clean the product. Install this product according to the manufacturer’s instructions. Install this product according to the National Electrical Code ANSI/NFPA 70 and the prevailing local codes and requirements. This product is designed for IT power systems with phase-to-phase voltage 120V, 240V, or 277V. This product should be operated with the type of power indicated on the marked label. If you are not sure of the type of power available, consult your Control4 dealer or local power company. Slots and openings on a cabinet rack, and components used with this product are provided for ventilation, reliable operation, and protection from overheating of the product. These slots and openings must not be blocked or covered. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. Never push objects of any kind into this product through cabinet slots because they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Only use the attachments and accessories included with this product or recommended by Control4. Do not allow anything to rest on the power cord. Do not install or place this product where people will walk on the cord. Do not use extension cords with any products in a Control4 system. If applicable, unplug this product during lightning storms or when unused for long periods of time. This product must be installed by qualified professionals only. Do not attempt to service this product yourself except as noted in this guide. Opening or removing covers of internal components may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged or frayed in any way; for example, a power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into this product, this product has been exposed to rain or moisture, this product does not operate normally, or this product has been dropped. Home Network Requirements Ensure that your home network solution is in place before starting your system setup. The multi tuner can be controlled through Ethernet. Antenna Requirements: • • Ensure that a proper AM/FM antenna is installed before beginning your system setup. For XM systems, install the XM antenna before beginning your system setup. Tuning Range 76.0 MHz - 108.0 MHz Sensitivity (50 ohm) 2.2 mV EMF AM Suppression 50 dB Audio Stereo Separation 25 dB Audio THD (1 Khz) < 0.5% AM Performance Front and Rear Panel Descriptions Back Panel (Model C4-TUN2-E_B with C4-XMOD Option Installed) 1 2 3 5 4 7 8 9 6 1 AC Power Inlet—for supplied power cord only. 2 FM Antenna port—for FM radio reception. 3 AM Antenna port—for AM radio reception. 4 Ethernet port—RJ-45 for a 10/100 BaseT Ethernet connection. 5 AM/FM Audio Out ports—RCA style Left and Right line-level analog audio out to connect to an audio amplifier. 6 SPDIF Coax Digital Audio Out ports—for digital audio out to connect to an audio amplifier. Tuning Range 149 – 23000 Khz Sensitivity 38 mV EMF Audio S/N 56 dB Audio THD (1 Khz) < 0.5% 7 XM Antenna port—for XM satellite radio reception. THD (1 kHz) 0.7 % 8 SIgnal-to-Noise Ratio 50 dB XM Audio Out ports—RCA style for left and right analog line-level out for connection to an audio amplifier. XM Performance (C4-XMOD only) Depends on XM subscription and your area. 9 XM SPDIF Coax Digital Audio Output. Display 4-line LED backlit LCD Communications IEEE 802.3 10/100 Ethernet, RJ-45 jack Power Requirements 115/230 VAC, 60/50 Hz, 5 Watt Maximum, 0.05A Dimensions H x W x D: 3.5” x 17.0” x 15.9” (89 x 432 x 404 mm) Weight: C4-TUN2-E-B (with 2 AM/FM tuners only) Weight: 9.9 lbs. (4.50 kg) Shipping Weight: 13.75 lbs. (6.25 kg) Front Panel 1 2 3 Install the Multi Tuner V2 1 Plan your Audio Out connections: You can connect to up to three amplifiers, audio switches, or receivers/pre-amp. Buttons—Provides access to menu options displayed on the LCD. 2 Set the Multi Tuner V2 in an A/V rack or another installation location. Select Dial—Scroll through list items and options displayed on the LCD or make selections. Also used during setup to ID device. 3 Connect the Multi Tuner V2 audio outputs: Connect to your amplifier, audio switch, or receiver audio inputs using audio cables. 4 Connect the antennas required to support the connected output devices. • AM Antenna: AM loop antenna • FM Antenna: F-type coaxial, 75 ohm impedance • XM Antenna: XM antenna 5 Connect to the Network: • Ethernet: Plug the data cable from the home network connection into the Multi Tuner V2 RJ-45 port (labeled “Ethernet”) and the network port on your wall or at the network switch. 6 Connect to Power: The power cord provided to the back of the Multi Tuner V2 and to the power outlet. Once the power cord is connected, the Multi Tuner V2 will power up. 1 Front Display (LCD)—Displays current tuner settings and LCD menus. 2 3 Back Panel (Model C4-TUN2-E_B) 1 WARNING! Do not expose the apparatus to dripping or splashing. Do not place objects filled with liquids near the apparatus. 2 3 4 AVERTISSEMENT ! N’exposez pas l’appareil à l’égoutture ou à l’éclaboussement. Ne placez pas les objets remplis de liquides près de l’appareil. WARNING! Setzen Sie den Apparat nicht Bratenfett oder dem Spritzen aus. Setzen Sie nicht die Gegenstände, die mit Flüssigkeiten nahe dem Apparat gefüllt werden. WARNING! To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture. 5 AVERTISSEMENT ! Pour réduire le risque du feu ou de choc électrique, n’exposez pas cet appareil à la pluie ou à l’humidité. WARNING! Um die Gefahr des Feuers oder des elektrischen Schlages zu verringern, setzen Sie diesen Apparat nicht Regen oder Feuchtigkeit aus. IMPORTANT! Using this product in a manner other than outlined in this document voids your warranty. Further, Control4 is NOT liable for any damage incurred with the misuse of this product. See “Limited 2 Year Warranty.” IMPORTANT ! Employer ce produit en quelque sorte autre que décrit dans ce document vide votre garantie. De plus, Control4 n’est pas responsable d’aucun dommage encouru avec l’abus de ce produit. Voyez que « a limité la garantie de 2 ans. » WICHTIG! Das Verwenden dieses Produktes in gewissem Sinne anders als umrissen in diesem Dokument hebt Ihre Garantie auf. Weiter ist Control4 NICHT für irgendeine Beschädigung verantwortlich, die mit der Fehlanwendung dieses Produktes genommen wird. Sehen Sie, daß „begrenzte eine 2 Jahr-Garantie.“ WARNING! This CLASS I apparatus must be connected to an AC mains socket outlet that has a protective earthing connection (i.e., third-prong ground conductor). DO NOT DEFEAT THE PROTECTIVE EARTHING CONNECTION! AVERTISSEMENT ! Cet appareillage de la CLASSE I doit être relié à une sortie de douille de forces à C.A. qui a un raccordement de mise à la terre protecteur (c.-à-d., conducteur rectifié parfourche). NE DÉFAITES PAS LE RACCORDEMENT DE MISE À LA TERRE PROTECTEUR! WARNING! Dieser Apparat der KATEGORIE I muss an einen WechselstromHauptleitungseinfaßungsanschluß angeschlossen werden, der einen schützenden Erdunganschluß hat (d.h., Drittzinke geriebenen Leiter). BESIEGEN SIE NICHT DEN SCHÜTZENDEN ERDUNG-ANSCHLUSS! 6 1 AC Power Inlet—for supplied power cord only. 2 FM Antenna port—for FM radio reception. 3 AM Antenna port—for AM radio reception. 4 Ethernet port—RJ-45 for a 10/100 BaseT Ethernet connection. 5 AM/FM Audio Out ports—RCA style Left and Right line-level analog audio out to connect to an audio amplifier. 6 SPDIF Coax Digital Audio Out ports—for digital audio out to connect to an audio amplifier. About the Main Menu When you first power up the Multi Tuner V2, the following System Status screen appears momentarily (similar to the one on the right). The System Status screen is then replaced by the Multi Tuner V2 main menu (shown in the screen to the right). • Tun1—Choose this to manually change a setting on Tuner 1, an AM/FM Tuner. Tun2—Choose this to manually change a setting on Tuner 2, an AM/FM Tuner. XM—Displays only when C4-XMOD is used. Choose this to manually change a setting on the XM Tuner. Setup—Choose this to access the Settings menu. • • • Activate the XM Satellite Radio Service Tuners upgraded with the XM Module Kit require a monthly subscription to the XM Satellite Radio service in order to receive XM radio channels. To subscribe and activate these services: 1 Use the Select Dial to tune the XM tuner to channel 0 and record the XM Radio ID (SDARS ID) that displays in the LCD window. 2 Contact XM Satellite Radio Inc. to subscribe to the XM radio service (see the next section for details). When instructed to do so by XM Satellite Radio Inc., tune the XM tuner to Channel 1 for about 20 minutes. When the tuner begins receiving XM stations, the LCD screen is enriched with station-specific information. 3 4 If the XM tuner is not receiving XM stations after 20 minutes: a b c Move your antenna to a new location. Go to http://www.xmradio.com/refresh/ Tune to Channel 1 again and wait approximately 20 minutes for the LCD screen to refresh. Listen to Satellite Radio Set LCD Display Preferences 1 At the main menu, choose Setup. The Settings menu displays with LCD selected (as shown) Satellite Radio delivers an incredible variety of commercial-free music including Pop, Rock, Country, R&B, Hip-Hop, Jazz, Classical and much more, plus coverage of all the top professional and college sports, including play-by-play and expert sports talk and analysis. You also get exclusive entertainment, talk, comedy, family programming, local traffic and weather and news from your most trusted sources. 2 Press the Select Dial. To listen to Satellite Radio on your Satellite-Ready receiver, you’ll need to add either a Sirius or XM Satellite Radio tuner (sold separately). Satellite Radio is available to residents of the United States (except Alaska and Hawaii), Puerto Rico, and Canada. The LCD menu displays. • Brightness—Supported range: 0 to 100 • Contrast—Supported range: 0 to 100 • Backlight (sec)—Supported settings are: • OFF (Always Off) • 5 to 90 seconds (default is 10 seconds) • ON (Always On) Any button push or dial push or turn will turn on the LCD Backlight unless OFF is set. If a specific time is set, this tells the Backlight how long to wait before turning off. If ON is set, the Backlight will remain on. Whether you purchase a Sirius or XM tuner, you’ll need to activate and subscribe to the service to listen to Satellite Radio. Easy-to-follow installation and setup instructions are provided with the satellite tuners. Whichever service you choose, there are a variety of programming packages available, including the option of adding “The Best of Sirius” programming to your XM tuner or “The Best of XM” programming to your Sirius tuner, enabling you to enjoy the most popular programming among both services. The “Best of” packages are not available to Sirius Canada or XM Canada subscribers at this time. Family friendly packages are also available to restrict channels that feature mature programming. To subscribe to XM, U.S. customers should visit www.xmradio.com or call 1-800-XMRADIO (1-800-967-2346); Canadian customers should visit www.xmradio.ca. To subscribe to Sirius, U.S. and Puerto Rico customers should visit www.sirius.com or call 1-888-539-SIRIUS (1-888-539-7474). Canadian customers should visit www.siriuscanada.ca. 3 At the LCD menu, use the Select Dial to highlight an option, then press the dial to enter Edit mode. In Edit mode, only the number to be edited is highlighted. 4 Launch Composer. Connect to a Local or Remote Director: Open the Director project for the controller that will control the multi tuner. For more information, refer to Composer Pro Getting Started. In Edit mode, turn the Select Dial to change a setting, then press the dial again to exit Edit mode. 5 To return to the main menu, choose Exit twice. Add the multi tuner to the system tree: Set a default setting for each tuner from the front panel: a 1 Configure the Multi Tuner V2 Use the Control4 Composer software to add the multi tuner to an existing system and configure it: 1 2 b In the System Design view, highlight the room in the tree where the multi tuner will reside. In the list displayed, double-click the applicable Control4 Multi Tuner V2 model: C4-TUN2-E-B or C4-TUN2-E-B_with_C4-XMOD (if C4-XMOD is installed). The associated Tuner objects now display in the tree in the selected room. Set AV and Network connections: In the Connections view, click the Control/AV tab (on the left). b For each tuner object in the tree—such as Tuner, Tuner 2, or Tuner XM (if using the driver “C4-TUN2-E-B_with_C4-XMOD”)—highlight each one and ensure it is connected to a radio. c For each tuner object in the tree, highlight each Audio Video Output and then drag and drop them one-by-one onto an item in the Input Devices list below. The association displays in both lists. d 4 5 Press the Select Dial on the multi tuner front panel to identify this device to the system. After a brief delay, the network address for this multi tuner is added to the Device list. Verify that multi tuner is an accessible device: Go to the System Design view and highlight the room, then go to Properties tab (top and center) > Audio Video Devices tab (center) to view the Available Audio Sources list for that room. • • • Choose AM or FM to view the first available station. c To change the station, turn the Select Dial or press one of the Seek buttons as needed. d To return to the main menu, press Exit. 2 Set Tuner 2 (TUN2) to an AM or FM channel, just as you did for Tuner 1 (TUN1) in step 1, and then press Exit to return to the main menu. 3 (For tuners upgraded with the XM Module) Set XM tuner (XM) to an XM channel: a Set Up the Radio Stations b To provide users easy access to radio stations throughout the system and to enrich graphical interfaces, use Composer to search for radio broadcasts and refresh Navigator interfaces. 1 Connect to Composer using a Local connection to the Director to which you added the multi tuner. Choose the Media view. 3 Highlight a radio in the Media list (on the left): XM Radio, FM Radio, or AM Radio and then click Search (upper-right). 4 When the dialog box appears, enter your zip code in the box and then click Search. The available stations display in the Search Results list. 5 In the Search Results list, select the stations to be added to the user interfaces (OnScreen Navigator, Wireless Touch Screen, Mini Touch Screen, System Remote Control, and LCD Keypad): Select individually or click Select All. 6 Click OK. The selected stations populate the XM, FM, or AM Radio pane. 7 Repeat step 3 through step 6 for the remaining radios. 8 From the File menu, click Refresh Navigators. Each radio station you selected is now available from within the Navigator interfaces. 9 For XM Tuner models: a Click the System Design view and highlight Tuner XM in the project tree. b On the Properties tab, ensure that the tuner has a good signal and that the SDARS ID matches the Radio ID listed on Channel 0 of the tuner. TUNER 1—Displays the radio station call numbers. It defaults to an FM channel until you set it. AM/FM—Press this button to toggle the tuner dial to either AM or FM stations. When you press the AM menu button, an AM channel displays with the option to toggle to an FM channel. When you press the FM menu button, an FM channel displays with the option to toggle to an AM channel. < SEEK SEEK >—Press these buttons to go to the next available station. EXIT—Press this to return to the main menu. b Now that you have successfully configured the multi tuner, continue to the next section to set up radio stations. 2 Press OK (accept) or CNCL (cancel or revert to previous) to either accept the current address or revert to the previous address. 6 When the address has been set up as desired, the tuner must be reset before the changes will take effect. Press RST to reset the tuner. Regulatory Compliance IMPORTANT! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. The Multi Tuner V2 complies with the standards described in this section c d Press XM to tune in an XM channel. The menu options are: • RCL—View preset channels. • SET—Set a preset channel. • CAT—Display current category. • EXIT—Press this to return to the main menu. To change to another XM channel, turn the Select Dial to scroll through available channels, then press the dial to select the displayed channel. To view XM channels in categories: (1) Press CAT. (2) Press the first and fourth buttons to scroll through available categories. (3) Turn the Select Dial to scroll through the stations available in the current category. (4) Press the dial to select the displayed channel. To return to the main menu, press Exit. Network Settings To view network settings: 1 At the main menu, choose Setup. The Settings menu displays with LCD selected (as shown). 2 Turn the Select Dial to highlight Network , then press the dial. The Ethernet settings display. MAC Address, IP Address, Default Gateway Configuration. 3 When finished viewing, press Exit to return to the Setup menu screen or press Exit twice to return to the main menu. Set the Static IP Address on the Front Panel 1 At the main menu, choose Setup. The Settings menu is displayed. 2 Turn the Select Dial to highlight Network , then press the dial. The Ethernet settings are displayed. 3 Turn the Select dial to highlight the mode, press the dial (to get into Edit mode), rotate the Select dial to change the mode to STATIC, and then press the dial or press OK to save the setting. Product: Multi Tuner V2 (Model # C4-TUN2-E-B; may include Model #C4-XMOD ) The undersigned hereby declares, on behalf of Control4 Corporation, that the above-referenced product, to which this declaration relates, is in conformity with the provisions of: • Council Directive 89/336/EEC (May 3, 1989) on Electromagnetic Compatibility • Council Directive 1999/5/EC (Mar 9, 1999) on Radio & Telecommunication Terminal Equipment (R&TTE) • Council Directive 73/23/EEC (Feb. 19, 1973) on Low Voltage Equipment Safety • Council Directive 93/68/EEC (Jul. 22, 1993) Amending Directives 89/336/EEC and 73/23/EEC and has been tested to the requirements of, and shown to be in compliance with, the following requisite standards: • EN 300 328 V1.7.1 (2006-10), Electromagnetic Compatibility and Radio Spectrum Matters (ERM); wide band transmission systems; data transmission equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques. • EN 55022: 2006 Information Technology Equipment • EN 55024: 1998 + A1: 2001 Information Technology Equipment—Immunity characteristics—limits and methods of measurement • IEC 60065:2001 amendment 1: 2005 Audio Video and similar electronic apparatus. This product is susceptible to RF interference between 5MHz and 20MHz. The Technical Construction File required by these Directives is maintained at the corporate headquarters of Control4, Salt Lake City, Utah, U.S.A. Signed, Brett Molen—Vice President, September 23, 2008 Dansk: Vigtigt! Lederen med grøn/gul isolation må kun tilsluttes en klemme mærket eller Norsk: Apparatet må tilkoples jordet stikkontakt. Suomi: Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan. Svensk: Apparaten skall anslutas till jordat uttag. At the main menu, press TUN1 to tune in an AM or FM channel. The Tuner 1 menu displays. (In this example, the tuner is tuned to an FM channel with the AM menu option to toggle to an AM channel.) • Click the Network tab (on the left), right-click on the tuner with the appropriate address type: IP (center screen), then choose Identify. e 5 Tuner 1 (TUN1) to an AM or FM channel: a In the My Drivers tab (on the right), go to Audio/Video > Tuner and double-click Tuner. a Turn the Select dial to highlight the address you want to change and then press the dial (to get into edit mode). The first octet of the address is selected. Turn the Select dial up or down to change the value. When the desired value is achieved, press the dial to advance to the next octet. Set the Channels from the Front Panel c 3 4 Limited 2-Year Warranty For complete warranty information, including details on consumer legal rights as well as warranty exclusions, visit www.control4.com/warranty. North America Recycling FCC For information on recycling, please go to www.control4.com/recycling. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of this device. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d’interférences nuisibles et (2) cet appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent causer un mauvais fonctionnement du dispositif. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This product has been tested to the requirements of, and shown to be in compliance with, the following requisite standard: Industry Canada This Class B digital apparatus complies with Canada ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Electrical Testing Labs (ETL) This product has been tested by ETL and has been found to be in compliance with: UL 60065, 7th Edition, 2006 + A1; 2006 - Audio, Video and Similar Electrical Apparatus — Safety Requirements CAN/CSA C22.2 No. 60065-03, Ed. 1; Revision: 01/01/2007 Standard for Audio, Video and Similar Electrical Apparatus Europe CE Declaration of Conformity European Contact Information Control4 UK Limited Unit 3, Green Park Business Centre Sutton-on-the-Forest, York YO61 IET, United Kingdom +44 (0) 134781 2300, [email protected] United States Contact Information Control4 Corporation 11734 S. Election Road, Suite 200 Salt Lake City, UT 84020-6432, USA Tel (801) 523-3100 Third-Party Disclaimer Sirius and XM subscriptions are sold separately and are governed by the Sirius Terms and Conditions (see www.sirius.com) or the XM Customer Agreement (see www.xmradio.com). Be sure to read these agreements before you purchase your subscription. Your service and subscription will automatically renew according to the Plan you choose, at the then current renewal rate until you call SiriusXM to cancel. XM tuners and home docks or Sirius tuners (each sold separately) are required to receive the Sirius or XM satellite radio service. It is prohibited to copy, decompile, disassemble, reverse engineer, hack, manipulate or otherwise make available any technology or software incorporated in receivers compatible with the Sirius or XM Satellite Radio Systems. SiriusXM U.S. Satellite Service is available only to those at least 18 years of age in the 48 contiguous USA and DC, with Sirius also available in PR (with coverage limitations), while SiriusXM Internet Radio is available throughout our satellite service area including PR and also in AK and HI. Service available in Canada; see www. siriuscanada.ca or www.xmradio.ca. SELF-INSTALLATION instructions and tips are provided for your convenience. You must determine if you have the knowledge, skills and ability required to properly perform an installation. SiriusXM shall have no liability for damage or injury resulting from the installation or use of any SiriusXM product or third party product. SiriusXM product warranties do not cover the installation, removal or reinstallation of any product. Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. All other marks and logos are the property of their respective owners. All rights reserved. About this Document ©2011 Control4. All rights reserved. Control4, the Control4 logo, the Control4 iQ logo and the Control4 certified logo are registered trademarks or trademarks of Control4 Corporation in the United States and/or other countries. All other names and brands may be claimed as the property of their respective owners. Pricing and specifications are subject to change without notice. Part Number: 200-00094, Rev. D 3/21/2011 Listen to Satellite Radio Set LCD Display Preferences 1 At the main menu, choose Setup. The Settings menu displays with LCD selected (as shown) Satellite Radio delivers an incredible variety of commercial-free music including Pop, Rock, Country, R&B, Hip-Hop, Jazz, Classical and much more, plus coverage of all the top professional and college sports, including play-by-play and expert sports talk and analysis. You also get exclusive entertainment, talk, comedy, family programming, local traffic and weather and news from your most trusted sources. 2 Press the Select Dial. To listen to Satellite Radio on your Satellite-Ready receiver, you’ll need to add either a Sirius or XM Satellite Radio tuner (sold separately). Satellite Radio is available to residents of the United States (except Alaska and Hawaii), Puerto Rico, and Canada. The LCD menu displays. • Brightness—Supported range: 0 to 100 • Contrast—Supported range: 0 to 100 • Backlight (sec)—Supported settings are: • OFF (Always Off) • 5 to 90 seconds (default is 10 seconds) • ON (Always On) Any button push or dial push or turn will turn on the LCD Backlight unless OFF is set. If a specific time is set, this tells the Backlight how long to wait before turning off. If ON is set, the Backlight will remain on. Whether you purchase a Sirius or XM tuner, you’ll need to activate and subscribe to the service to listen to Satellite Radio. Easy-to-follow installation and setup instructions are provided with the satellite tuners. Whichever service you choose, there are a variety of programming packages available, including the option of adding “The Best of Sirius” programming to your XM tuner or “The Best of XM” programming to your Sirius tuner, enabling you to enjoy the most popular programming among both services. The “Best of” packages are not available to Sirius Canada or XM Canada subscribers at this time. Family friendly packages are also available to restrict channels that feature mature programming. To subscribe to XM, U.S. customers should visit www.xmradio.com or call 1-800-XMRADIO (1-800-967-2346); Canadian customers should visit www.xmradio.ca. To subscribe to Sirius, U.S. and Puerto Rico customers should visit www.sirius.com or call 1-888-539-SIRIUS (1-888-539-7474). Canadian customers should visit www.siriuscanada.ca. 3 At the LCD menu, use the Select Dial to highlight an option, then press the dial to enter Edit mode. In Edit mode, only the number to be edited is highlighted. 4 Launch Composer. Connect to a Local or Remote Director: Open the Director project for the controller that will control the multi tuner. For more information, refer to Composer Pro Getting Started. In Edit mode, turn the Select Dial to change a setting, then press the dial again to exit Edit mode. 5 To return to the main menu, choose Exit twice. Add the multi tuner to the system tree: Set a default setting for each tuner from the front panel: a 1 Configure the Multi Tuner V2 Use the Control4 Composer software to add the multi tuner to an existing system and configure it: 1 2 b In the System Design view, highlight the room in the tree where the multi tuner will reside. In the list displayed, double-click the applicable Control4 Multi Tuner V2 model: C4-TUN2-E-B or C4-TUN2-E-B_with_C4-XMOD (if C4-XMOD is installed). The associated Tuner objects now display in the tree in the selected room. Set AV and Network connections: In the Connections view, click the Control/AV tab (on the left). b For each tuner object in the tree—such as Tuner, Tuner 2, or Tuner XM (if using the driver “C4-TUN2-E-B_with_C4-XMOD”)—highlight each one and ensure it is connected to a radio. c For each tuner object in the tree, highlight each Audio Video Output and then drag and drop them one-by-one onto an item in the Input Devices list below. The association displays in both lists. d 4 5 Press the Select Dial on the multi tuner front panel to identify this device to the system. After a brief delay, the network address for this multi tuner is added to the Device list. Verify that multi tuner is an accessible device: Go to the System Design view and highlight the room, then go to Properties tab (top and center) > Audio Video Devices tab (center) to view the Available Audio Sources list for that room. • • • Choose AM or FM to view the first available station. c To change the station, turn the Select Dial or press one of the Seek buttons as needed. d To return to the main menu, press Exit. 2 Set Tuner 2 (TUN2) to an AM or FM channel, just as you did for Tuner 1 (TUN1) in step 1, and then press Exit to return to the main menu. 3 (For tuners upgraded with the XM Module) Set XM tuner (XM) to an XM channel: a Set Up the Radio Stations b To provide users easy access to radio stations throughout the system and to enrich graphical interfaces, use Composer to search for radio broadcasts and refresh Navigator interfaces. 1 Connect to Composer using a Local connection to the Director to which you added the multi tuner. Choose the Media view. 3 Highlight a radio in the Media list (on the left): XM Radio, FM Radio, or AM Radio and then click Search (upper-right). 4 When the dialog box appears, enter your zip code in the box and then click Search. The available stations display in the Search Results list. 5 In the Search Results list, select the stations to be added to the user interfaces (OnScreen Navigator, Wireless Touch Screen, Mini Touch Screen, System Remote Control, and LCD Keypad): Select individually or click Select All. 6 Click OK. The selected stations populate the XM, FM, or AM Radio pane. 7 Repeat step 3 through step 6 for the remaining radios. 8 From the File menu, click Refresh Navigators. Each radio station you selected is now available from within the Navigator interfaces. 9 For XM Tuner models: a Click the System Design view and highlight Tuner XM in the project tree. b On the Properties tab, ensure that the tuner has a good signal and that the SDARS ID matches the Radio ID listed on Channel 0 of the tuner. TUNER 1—Displays the radio station call numbers. It defaults to an FM channel until you set it. AM/FM—Press this button to toggle the tuner dial to either AM or FM stations. When you press the AM menu button, an AM channel displays with the option to toggle to an FM channel. When you press the FM menu button, an FM channel displays with the option to toggle to an AM channel. < SEEK SEEK >—Press these buttons to go to the next available station. EXIT—Press this to return to the main menu. b Now that you have successfully configured the multi tuner, continue to the next section to set up radio stations. 2 Press OK (accept) or CNCL (cancel or revert to previous) to either accept the current address or revert to the previous address. 6 When the address has been set up as desired, the tuner must be reset before the changes will take effect. Press RST to reset the tuner. Regulatory Compliance IMPORTANT! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. The Multi Tuner V2 complies with the standards described in this section c d Press XM to tune in an XM channel. The menu options are: • RCL—View preset channels. • SET—Set a preset channel. • CAT—Display current category. • EXIT—Press this to return to the main menu. To change to another XM channel, turn the Select Dial to scroll through available channels, then press the dial to select the displayed channel. To view XM channels in categories: (1) Press CAT. (2) Press the first and fourth buttons to scroll through available categories. (3) Turn the Select Dial to scroll through the stations available in the current category. (4) Press the dial to select the displayed channel. To return to the main menu, press Exit. Network Settings To view network settings: 1 At the main menu, choose Setup. The Settings menu displays with LCD selected (as shown). 2 Turn the Select Dial to highlight Network , then press the dial. The Ethernet settings display. MAC Address, IP Address, Default Gateway Configuration. 3 When finished viewing, press Exit to return to the Setup menu screen or press Exit twice to return to the main menu. Set the Static IP Address on the Front Panel 1 At the main menu, choose Setup. The Settings menu is displayed. 2 Turn the Select Dial to highlight Network , then press the dial. The Ethernet settings are displayed. 3 Turn the Select dial to highlight the mode, press the dial (to get into Edit mode), rotate the Select dial to change the mode to STATIC, and then press the dial or press OK to save the setting. Product: Multi Tuner V2 (Model # C4-TUN2-E-B; may include Model #C4-XMOD ) The undersigned hereby declares, on behalf of Control4 Corporation, that the above-referenced product, to which this declaration relates, is in conformity with the provisions of: • Council Directive 89/336/EEC (May 3, 1989) on Electromagnetic Compatibility • Council Directive 1999/5/EC (Mar 9, 1999) on Radio & Telecommunication Terminal Equipment (R&TTE) • Council Directive 73/23/EEC (Feb. 19, 1973) on Low Voltage Equipment Safety • Council Directive 93/68/EEC (Jul. 22, 1993) Amending Directives 89/336/EEC and 73/23/EEC and has been tested to the requirements of, and shown to be in compliance with, the following requisite standards: • EN 300 328 V1.7.1 (2006-10), Electromagnetic Compatibility and Radio Spectrum Matters (ERM); wide band transmission systems; data transmission equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques. • EN 55022: 2006 Information Technology Equipment • EN 55024: 1998 + A1: 2001 Information Technology Equipment—Immunity characteristics—limits and methods of measurement • IEC 60065:2001 amendment 1: 2005 Audio Video and similar electronic apparatus. This product is susceptible to RF interference between 5MHz and 20MHz. The Technical Construction File required by these Directives is maintained at the corporate headquarters of Control4, Salt Lake City, Utah, U.S.A. Signed, Brett Molen—Vice President, September 23, 2008 Dansk: Vigtigt! Lederen med grøn/gul isolation må kun tilsluttes en klemme mærket eller Norsk: Apparatet må tilkoples jordet stikkontakt. Suomi: Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan. Svensk: Apparaten skall anslutas till jordat uttag. At the main menu, press TUN1 to tune in an AM or FM channel. The Tuner 1 menu displays. (In this example, the tuner is tuned to an FM channel with the AM menu option to toggle to an AM channel.) • Click the Network tab (on the left), right-click on the tuner with the appropriate address type: IP (center screen), then choose Identify. e 5 Tuner 1 (TUN1) to an AM or FM channel: a In the My Drivers tab (on the right), go to Audio/Video > Tuner and double-click Tuner. a Turn the Select dial to highlight the address you want to change and then press the dial (to get into edit mode). The first octet of the address is selected. Turn the Select dial up or down to change the value. When the desired value is achieved, press the dial to advance to the next octet. Set the Channels from the Front Panel c 3 4 Limited 2-Year Warranty For complete warranty information, including details on consumer legal rights as well as warranty exclusions, visit www.control4.com/warranty. North America Recycling FCC For information on recycling, please go to www.control4.com/recycling. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of this device. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d’interférences nuisibles et (2) cet appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent causer un mauvais fonctionnement du dispositif. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This product has been tested to the requirements of, and shown to be in compliance with, the following requisite standard: Industry Canada This Class B digital apparatus complies with Canada ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Electrical Testing Labs (ETL) This product has been tested by ETL and has been found to be in compliance with: UL 60065, 7th Edition, 2006 + A1; 2006 - Audio, Video and Similar Electrical Apparatus — Safety Requirements CAN/CSA C22.2 No. 60065-03, Ed. 1; Revision: 01/01/2007 Standard for Audio, Video and Similar Electrical Apparatus Europe CE Declaration of Conformity European Contact Information Control4 UK Limited Unit 3, Green Park Business Centre Sutton-on-the-Forest, York YO61 IET, United Kingdom +44 (0) 134781 2300, [email protected] United States Contact Information Control4 Corporation 11734 S. Election Road, Suite 200 Salt Lake City, UT 84020-6432, USA Tel (801) 523-3100 Third-Party Disclaimer Sirius and XM subscriptions are sold separately and are governed by the Sirius Terms and Conditions (see www.sirius.com) or the XM Customer Agreement (see www.xmradio.com). Be sure to read these agreements before you purchase your subscription. Your service and subscription will automatically renew according to the Plan you choose, at the then current renewal rate until you call SiriusXM to cancel. XM tuners and home docks or Sirius tuners (each sold separately) are required to receive the Sirius or XM satellite radio service. It is prohibited to copy, decompile, disassemble, reverse engineer, hack, manipulate or otherwise make available any technology or software incorporated in receivers compatible with the Sirius or XM Satellite Radio Systems. SiriusXM U.S. Satellite Service is available only to those at least 18 years of age in the 48 contiguous USA and DC, with Sirius also available in PR (with coverage limitations), while SiriusXM Internet Radio is available throughout our satellite service area including PR and also in AK and HI. Service available in Canada; see www. siriuscanada.ca or www.xmradio.ca. SELF-INSTALLATION instructions and tips are provided for your convenience. You must determine if you have the knowledge, skills and ability required to properly perform an installation. SiriusXM shall have no liability for damage or injury resulting from the installation or use of any SiriusXM product or third party product. SiriusXM product warranties do not cover the installation, removal or reinstallation of any product. Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries. All other marks and logos are the property of their respective owners. All rights reserved. About this Document ©2011 Control4. All rights reserved. Control4, the Control4 logo, the Control4 iQ logo and the Control4 certified logo are registered trademarks or trademarks of Control4 Corporation in the United States and/or other countries. All other names and brands may be claimed as the property of their respective owners. Pricing and specifications are subject to change without notice. Part Number: 200-00094, Rev. D 3/21/2011