Transcript
MULTICONTACTS
marechal.com
MULTICONTACTS • High-performance connection. • Large wiring capacity with the same contact. • Quick and easy assembly and disassembly. • Endurance and long life. • Choose your required configuration up to 37 contacts • version available.
PN12C
DSN24C/ DS24C
DSN37C/ DS37C
PXN12C
DXN25C
DXN37C
• Up to 12 contacts (12P or 11P+E) • 16 A / 480 V maxi. • GRP or Metal
• Up to 24 contacts (24P or 23P+E) • 16 A / 480 V maxi. • GRP
• Up to 37 contacts (37P or 36P+E) • 16 A / 480 V maxi. • GRP or Metal
• 12 contacts (11P+E) • 10 A / 220 V maxi. • Metal
• 25 contacts (24P+E) • 10 A / 440 V maxi. • Metal
• 37 contacts (36P+E) • 10 A / 230 V maxi. • Metal
•
•
•
II2 G D Ex e IIC
II2 G D Ex e IIC
II2 G D Ex e IIC
¢¢INDUSTRIAL PRODUCTS PN12C GRP
PN12C Metal
DSN24C GRP
DS24C GRP
DSN37C GRP
DS37C GRP
DS37C Metal
Socket-outlet*
01A4001
09A4001
61B4002
31B4002
61C4003
31C4003
39C4003
Inlet*
01A8001
09A8001
61B8002
31B8002
61C8003
31C8003
39C8003
* Options and accessories are available for these devices. Thank you to refer to our general catalogue for part numbers.
¢¢Ex PRODUCTS PXN12C Metal
DXN25C Metal
DXN37C Metal
Wall mounting socket
06A0001
36D0002
36C0003
Inclined socket
06A7001
36D7002
36C7003
Coupler socket
06A3001
36D3002
36C3003
Wall mounting appliance inlet
06A6001
36D6002
36C6003
Inclined appliance inlet
06A9001
36D9002
36C9003
Plug
06A1001
36D1002
36C1003
Standards compliance Multicontact connectors comply with: • the European Low Voltage Directive 2006/95/EC • the NF C15-100 installation standard • the NF C20-130 crimping standard • the IEC 61984 connectors standard.
Each product is supplied with 1, 2 or 3 bag(s) of 13 contacts depending on the maximum configuration. This allows you to set up the product to suit your needs.
¢¢BAG OF 13 CONTACTS (SUPPLIED WITH INSULATION SLEEVES AND FERRULES) PN12C / PXN12C
DSN24C / DS24C / DSN37C / DS37C / DXN25C / DXN37C
Socket-outlet
01AA213
01AA213
Inlet
01AA113
61CA113
Crimping tool
61CA500
Helavia sleeve expansion tool
61CA400
Bag of 13 heat shrink insulation sleeves
61CA083
marechal.com
Economic and technical advantages Crimping ensures an economical and sustainable solution through installation time saving and quality of connection. • No need for soldering performance qualifications. • High resistance to vibration. • Handling more than 5000 operations: a high durability and quality of connection guaranteed. ¢¢ELECTRICAL FEATURES PN12C GRP or Metal
DSN24C GRP
Voltage
DS24C GRP
DSN37C GRP
DS37C GRP or Metal
480 V
Impulse withstand voltage
PXN12C Metal
DXN25C Metal
DXN37C Metal
220 V
440 V
230 V
5 kV / Pollution degree 3
Contact resistance
‹ 2mΩ
Permitted current range
4-20 mA / 16 A
4-20 mA / 10 A
Rated current per contact (max)
16 A
10 A
Total current carried
≤ 110 A
≤ 230 A
≤ 230 A
≤ 360 A
Wiring
≤ 360 A
1 - 2,5 mm2
Keying positions*
2
1
1
3
3
2
3
3
DSN24C GRP
DS24C GRP
DSN37C GRP
DS37C GRP o Metal
PXN12C Metal
DXN25C Metal
DXN37C Metal
-40°C to +55°C
-40°C to +60°C
-40°C to +55°C
* Delivery of 2 caps for larger number of coding.
¢¢CLIMATIC FEATURES PN12C GRP o Metal
Ambient temperature
-40°C to +60°C
IP protection with plug connected
IP66/IP67
IP66/IP67
IP54
IP66/IP67
IP54 (GRP) IP66/IP67 (Metal)
IP65/IP66
IP66/IP67
IP66/IP67
IP protection with lid closed
IP66/IP67
IP66/IP67
IP55
IP66/IP67
IP55 (GRP) IP66/IP67 (Metal)
IP65/IP66
IP66/IP67
IP66/IP67
PXN12C Metal
DXN25C Metal
DXN37C Metal
Salt, Fog performance
200 hrs minimum connected
Resistance to fluids
Motor oils, petrol, fats, detergents...
¢¢MECHANICAL FEATURES PN12C GRP o Metal
Butt contacts
DSN24C GRP
DS24C GRP
DSN37C GRP
Female contacts: Copper alloy silver plated / Male contacts : silver-nickel tips
Contact protection
Silvering
Load cycles Shock resistance Vibration
marechal.com
DS37C GRP o Metal
› 5000 cycles IK08 (GRP) IK09 (Metal)
IK08
IK08
IK08
IK08 (GRP) IK09 (Metal)
IK09
IK09
Frequency 5-1000 Hz, 1g (90 minutes on each critical frequency) according to IEC 6068-2-6
IK09
ASSEMBLY/DISASSEMBLY
Cable
Ferrule Insulation sleeve
Female contact silver plated
Locking ring
Female socketoutlet casing
Insulator
FAST WIRING
Female contact
• Cable conductors: 1 mm² to 2,5 mm² • Before wiring, equip each conductor with a heat-shrink sleeve or an insulating sleeve. • After wiring, cover the visible portion of the contact with the sleeve. • Crimp the contact with a KNIPEX crimping tool P/N° 61CA500 or a GREENLEE crimping tool P/N° 45505. • Use the 4 mm² footprint whatever the conductor cross-section. • Perform a double crimping in compliance with CEI 60352-2 standard. • Conductors can equally be soldered.
SIMPLE ASSEMBLY AND DISASSEMBLY
Assembly
To insert contacts when they have been wired is simple. Push wired contact into rear of insulator until it stops to complete the installation.
marechal.com
Male contact
Removing tool
• For conductors sizes 1 or 1,5 mm² the ferrules supplied must be used as well as the insultation sleeves. • Conductors can equally be soldered.
Disassembly
To remove, use the tool provided. Push tool from front onto contact until tool stops. Contact is then released at rear of insulator.
Insulation sleeve Male contact silver plated + silver-nickel tips
Male inlet casing
Insulator
Cable
Ferrule
Locking ring
EXAMPLES OF APPLICATIONS
WATER TREATMENT
FOOD INDUSTRY
PEPSI SA SOUTH AFRICA
Food processing: fizzy drinks, fruit juices, savoury biscuits and cereal
R etrofitting factory to Pepsico standards. • Q uick and safe intervention : rapid connection and disconnection of equipment • A utomatic IP66/IP67sealing: resistance to humidity and water spray caused by cutting or cleaning.
FBI BIOME FRANCE
Mobile transportable units for biogas or liquid treatment produced by waste
P ower supply to evaporation module, Cistern supply, Dosing pump. • T ime savings on installation and mobility: mobile units change place every 4 to 6 weeks and use of extension cables equipped with decontactors when facilities are too far from the main storage tank • A utomatic water- and dust-tight sealing in humid and harsh environments •M ultifunction: safety, power and signals.
INFRASTRUCTURES
INFRABEL BELGIUM
Management of Belgian rail network infrastructure
C onnection via cables between the electric cabinets and the maintenance workshops • C ompact design •W orkers safety: socket-outlets with integral switching allows quick disconnection by persons without electrical training • R obustness: material resistance to shock up to IK09 (metal version)
ENTERTAINMENT
COWBOYS STADIUM USA
marechal.com
Football stadium of Dallas
P rovide power to audio systems • R eliability and performance over time through technology of butt contacts • R obustness: resistance of materials to temperature variations (-40 ° C to +100 ° C) • IP66/IP67 automatic water- and dust-tight sealing: resistance to external conditions.
Spain Avda. Carlos Sainz, 7, 1ª planta, oficina 2, 28914 Leganés – Madrid Tel.: +34 91 358 86 12 Fax: + 34 91 358 89 70 e-mail:
[email protected] Italy Via Italia 33, 20060 Gessate (MILANO) Tel.: +39 02 95 38 04 06 Fax: +39 02 95 38 08 58 e-mail:
[email protected] United Kingdom / Ireland Tel: +44 (0) 3330 124 048 e-mail:
[email protected] Benelux Hogehilweg 16-4 1101 CD Amsterdam Zuidoost The Netherlands Tel.: +31 (0)6 52 56 40 81 Fax: +31 (0)84 870 02 13 e-mail:
[email protected]
HEAD OFFICE 5, avenue de Presles F-94417 Saint-Maurice Cedex Phone : +33 (0)1 45 11 60 00 Fax : +33 (0)1 45 11 60 60 e-mail:
[email protected]
marechal.com
Germany / Austria / Switzerland / East Europe / Russia MARECHAL GmbH Im Lossenfeld 8 D-77731 Willstätt-Sand Germany Tel.: +49 (0)7852 / 91 96-0 Fax: +49 (0)7852 / 91 96-19 e-mail:
[email protected]
Middle East Technor Middle East DMCC Unit No.2101, Fortune Executive Tower, Plot No T1 Jumeirah Lakes Towers P.O. Box 392054 Dubai, United Arab Emirates Tel. : +971 4 362 1418 Fax : +971 4 362 1419 e-mail:
[email protected]
Africa SADC area HYCON MARECHAL TECHNOLOGY PO Box 13875 Witfield 1467 Unit A1 Harvard Lane Aero Star Business Park Jet Park Road, Jet Park South Africa Tel.: +27 11 894 7226/7/8 Fax: 086 604 1778 e-mail:
[email protected]
Asia MARECHAL ELECTRIC Asia Pte Ltd 9 Tagore Lane #01-05 9@Tagore Singapore 787472 Tel. : +65 6554 2722 Fax : +65 6455 9077 e-mail:
[email protected]
USA / Canada / Mexico MELTRIC Corporation 4765 W. Oakwood Park Drive Franklin WI 53132 USA Tel.: +1 414 433 2700 Fax: +1 414 433 2701 e-mail:
[email protected]
Australia MARECHAL AUSTRALIA PTY LTD 20 Technology Circuit HALLAM VIC 3803 Tel: +61 1300 661 830 Fax: +61 1300 663 510 e-mail :
[email protected]
For any other country or area, please contact head office.
Enmultis201604 - All rights reserved
MARECHAL ELECTRIC GROUP
