Multilayer Baluns, Hhm Series Hhm1710d1 For Bluetooth & Ieee802.11b/g Terminal Functions

Transcript

(1/53) Multilayer Baluns, HHM Series HHM1710D1 For Bluetooth & IEEE802.11b/g SHAPES AND DIMENSIONS/CIRCUIT 1.6±0.1 5 1 2 TERMINAL FUNCTIONS 0.6±0.1 6 4 0.8±0.1 6 1 2 3 4 5 6 Balanced output 50Ω 1 2 3 0.3±0.1 0.1±0.1 0.25±0.1 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.25 6 5 4 1 2 3 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 0 to 0.1 0 to 0.1 0.25 0.6 0.3 0.6 4 Unbalanced input 50Ω 3 0.55±0.1 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 50Ω 2400 to 2500MHz 10dB min. 180±10deg 0±2.0dB 1.2dB max. –40 to +85°C –40 to +85°C 4000pieces/reel 7 0. 0.3 Dimensions in mm FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 50Ω RETURN LOSS Return loss (dB) 0 AMPLITUDE BALANCE 1: 2400.0MHz –12.04dB 2: 2500.0MHz –12.30dB –5 –10 1 –15 2 –20 –25 2100 2200 2300 2400 2500 Frequency (MHz) 2600 2700 Insertion loss (dB) INSERTION LOSS 0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 2100 2200 Amplitude balance (dB) ø0.3 Through-hole 5 4 3 2 1 0 –1 –2 –3 –4 –5 2100 2200 1: 2400.0MHz 0.41dB 2: 2500.0MHz 0.57dB 1 2 2300 2400 2500 Frequency (MHz) 2600 2700 PHASE BALANCE 1 1: 2400.0MHz –0.88dB 2: 2500.0MHz –0.88dB 2 2300 2400 2500 Frequency (MHz) 2600 2700 Phase balance (deg.) 0.3 205 200 195 190 185 180 175 170 165 160 155 2100 2200 1: 2400.0MHz 177.06deg. 2: 2500.0MHz 177.94deg. 1 2 2300 2400 2500 Frequency (MHz) 2600 2700 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (2/53) Multilayer Baluns, HHM Series HHM1711D1 For Bluetooth & IEEE802.11b/g SHAPES AND DIMENSIONS/CIRCUIT 1.6±0.1 1 5 2 TERMINAL FUNCTIONS 0.6±0.1 6 4 0.8±0.1 6 Balanced output 100Ω 1 2 3 0.3±0.1 0.1±0.1 0.25±0.1 1 2 3 4 5 6 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.25 6 5 4 1 2 3 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 0 to 0.1 0 to 0.1 0.25 0.6 0.3 0.6 4 Unbalanced input 50Ω 3 0.55±0.1 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 100Ω 2400 to 2500 MHz 10dB min. 180±10deg 0±2.0dB 1.2dB max. –40 to +85°C –40 to +85°C 4000pieces/reel 7 0. 0.3 ø0.3 Through-hole Dimensions in mm FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 100Ω RETURN LOSS Return loss (dB) 0 1: 2400MHz –13.62dB 2: 2500MHz –12.33dB –5 –10 –15 AMPLITUDE BALANCE 1 2 –20 –25 Amplitude balance (dB) 0.3 –30 2100 2200 2300 2400 2500 2600 2700 2800 Frequency (MHz) 0 1: 2400.0MHz –0.5 –0.82dB –1.0 1 2 2: 2500.0MHz –1.5 –0.87dB –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 2100 2200 2300 2400 2500 2600 2700 2800 Frequency (MHz) PHASE BALANCE Phase balance (deg.) Insertion loss (dB) INSERTION LOSS 5 1: 2400.0MHz 4 –0.45dB 3 2: 2500.0MHz 2 –0.21dB 1 0 2 –1 1 –2 –3 –4 –5 2100 2200 2300 2400 2500 2600 2700 2800 Frequency (MHz) 205 1: 2400MHz 200 179.9deg. 195 2: 2500MHz 190 179.8deg. 185 180 2 1 175 170 165 160 155 2100 2200 2300 2400 2500 2600 2700 2800 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (3/53) Multilayer Baluns, HHM Series HHM1712D1 For Bluetooth & IEEE802.11b/g SHAPES AND DIMENSIONS/CIRCUIT TERMINAL FUNCTIONS 0.6±0.1 6 5 4 1 2 3 6 0.8±0.1 1.6±0.1 Balanced output 150Ω 2 3 0.3±0.1 0.1±0.1 0.25±0.1 1 2 3 4 5 6 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.25 6 5 4 1 2 3 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 0 to 0.1 0 to 0.1 0.25 0.6 0.3 0.6 4 Unbalanced input 50Ω 1 0.55±0.1 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 150Ω 2400 to 2500 MHz 10dB min. 180±10deg 0±2.0dB 1.2dB max. –40 to +85°C –40 to +85°C 4000pieces/reel 7 0. 0.3 ø0.3 Through-hole Dimensions in mm FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 150Ω RETURN LOSS Return loss (dB) 0 AMPLITUDE BALANCE 1: 2400MHz –20.89dB 2: 2500MHz –20.10dB –5 –10 –15 –20 –25 1 2 Amplitude balance (dB) 0.3 –30 2100 2200 2300 2400 2500 2600 2700 2800 Frequency (MHz) 0 1: 2400MHz –0.5 –0.74dB 2 –1.0 1 2: 2500MHz –1.5 –0.69dB –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 2100 2200 2300 2400 2500 2600 2700 2800 Frequency (MHz) PHASE BALANCE Phase balance (deg.) Insertion loss (dB) INSERTION LOSS 5 1: 2400.0MHz 4 –0.33dB 3 2: 2500.0MHz 2 0.04dB 1 0 2 –1 1 –2 –3 –4 –5 2100 2200 2300 2400 2500 2600 2700 2800 Frequency (MHz) 205 1: 2400MHz 200 173.3deg. 195 2: 2500MHz 190 172.2deg. 185 180 175 1 170 2 165 160 155 2100 2200 2300 2400 2500 2600 2700 2800 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (4/53) Multilayer Baluns, HHM Series HHM1713D1 For Bluetooth & IEEE802.11b/g SHAPES AND DIMENSIONS/CIRCUIT 1.6±0.1 5 1 2 TERMINAL FUNCTIONS 0.6±0.1 6 4 0.8±0.1 6 1 2 3 4 5 6 Balanced output 200Ω 1 2 3 0.3±0.1 0.1±0.1 0.25±0.1 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.25 0.25 6 5 4 1 2 3 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 0 to 0.1 0 to 0.1 0.6 0.3 0.6 4 Unbalanced input 50Ω 3 0.55±0.1 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 200Ω 2400 to 2500 MHz 10dB min. 180±10deg 0±2.0dB 1.2dB max. –40 to +85°C –40 to +85°C 4000pieces/reel 7 0. 0.3 ø0.3 Through-hole Dimensions in mm FREQUENCY CHARCTERISTICS Unbalance 50Ω/Balance 200Ω RETURN LOSS 1: 2400MHz –21.65dB 2: 2450MHz –23.21dB 3: 2500MHz –18.84dB –5 –10 –15 –20 –25 2000 3 2200 1 2 2400 2600 Frequency (MHz) 2800 INSERTION LOSS Insertion loss (dB) –2 –3 –4 2000 1: 2400MHz 0.19dB 2: 2450MHz 0.40dB 3: 2500MHz 0.62dB 3 1 2 2200 2400 2600 Frequency (MHz) 2800 210 1: 2400MHz –0.87dB 2: 2450MHz –0.85dB 3: 2500MHz –0.85dB –0.5 –1.0 1 2 3 –1.5 –2.0 –2.5 –3.0 2000 4 3 2 1 0 –1 PHASE BALANCE 0 2200 2400 2600 Frequency (MHz) 2800 Phase balance (deg.) Return loss (dB) 0 AMPLITUDE BALANCE Amplitude balance (dB) 0.3 1: 2400MHz 172.52dB 2: 2450MHz 171.75dB 3: 2500MHz 171.05dB 200 190 180 170 1 2 3 160 150 2000 2200 2400 2600 Frequency (MHz) 2800 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (5/53) Multilayer Baluns, HHM Series HHM1720A1 For EGSM SHAPES AND DIMENSIONS/CIRCUIT 1.6±0.1 5 1 2 TERMINAL FUNCTIONS 0.6±0.1 6 4 0.8±0.1 6 4 Unbalanced input 50Ω 3 1 2 3 4 5 6 Balanced output 200Ω 1 0.55±0.1 5 2 3 0.3±0.1 0.1±0.1 0.25±0.1 Dimensions in mm RECOMMENDED PCB PATTERN 0.25 0.25 6 5 4 1 2 3 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 0 to 0.1 0 to 0.1 0.6 0.3 0.6 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 200Ω 880 to 960 MHz 10dB min. 180±10deg 0±1.0dB 1.4dB max. –40 to +85°C –40 to +85°C 4000pieces/reel 7 0. 0.3 ø0.3 Through-hole Dimensions in mm 0 –5 –10 –15 –20 –25 –30 –35 –40 750 AMPLITUDE BALANCE 1: 880MHz –17.13dB 2: 920MHz –29.59dB 3: 960MHz –23.22dB 1 3 2 800 850 900 950 1000 1050 1100 Frequency (MHz) Insertion loss (dB) INSERTION LOSS 0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 750 1 800 5 4 3 2 1 0 –1 –2 –3 –4 –5 750 1 800 2 3 1: 880MHz –0.12dB 2: 920MHz 0.07dB 3: 960MHz 0.23dB 850 900 950 1000 1050 1100 Frequency (MHz) PHASE BALANCE 2 3 1: 880MHz –1.07dB 2: 920MHz –0.93dB 3: 960MHz –0.91dB 850 900 950 1000 1050 1100 Frequency (MHz) 200 Phase balance (deg.) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 200Ω RETURN LOSS Amplitude balance (dB) 0.3 1: 880MHz 177.24deg. 2: 920MHz 176.73deg. 3: 960MHz 176.16deg. 190 180 1 2 3 170 160 750 800 850 900 950 1000 1050 1100 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (6/53) Multilayer Baluns, HHM Series HHM1726L1 For PDC800/Tx+Rx SHAPES AND DIMENSIONS/CIRCUIT TERMINAL FUNCTIONS 0.6±0.1 5 4 1 2 3 6 0.8±0.1 1.6±0.1 6 Balanced output 100Ω 2 3 0.3±0.1 0.1±0.1 0.25±0.1 1 2 3 4 5 6 Unbalanced Port GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.25 6 5 4 1 2 3 This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 0 to 0.1 0 to 0.1 0.25 0.6 0.3 0.6 4 Unbalanced input 50Ω 1 0.55±0.1 5 ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 100Ω 893 to 958 MHz 10dB min. 180±15deg 0±1.5dB 1.0dB max. –40 to +85°C –40 to +85°C 4000pieces/reel 7 0. 0.3 Dimensions in mm Return loss (dB) FREQUENCY CHARCTERISTICS Unbalance 50Ω/Balance 100Ω RETURN LOSS 0 1: 893MHz –5 –23.34dB –10 2: 958MHz –15 –23.27dB –20 –25 2 1 –30 –35 –40 –45 –50 700 750 800 850 900 950 1000 1050 1100 Frequency (MHz) Insertion loss (dB) INSERTION LOSS 0 1: 893MHz –0.5 2 1 –0.32dB –1.0 2: 958MHz –1.5 –0.31dB –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 700 750 800 850 900 950 1000 1050 1100 Frequency (MHz) AMPLITUDE BALANCE Amplitude balance (dB) ø0.3 Through-hole 5 1: 2400MHz 4 0.89dB 3 2: 2500MHz 2 –0.67dB 1 1 0 –1 2 –2 –3 –4 –5 700 750 800 850 900 950 1000 1050 1100 Frequency (MHz) PHASE BALANCE Phase balance (deg.) 0.3 205 1: 2400MHz 200 182.27deg. 195 2: 2500MHz 190 182.13deg. 185 180 1 2 175 170 165 160 155 700 750 800 850 900 950 1000 1050 1100 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (7/53) Multilayer Baluns, HHM Series HHM1731A2 For DCS/Tx+Rx SHAPES AND DIMENSIONS/CIRCUIT 1.6±0.1 1 5 2 TERMINAL FUNCTIONS 0.6±0.1 6 4 0.8±0.1 6 Balanced output 200Ω 1 2 3 0.3±0.1 0.1±0.1 0.25±0.1 1 2 3 4 5 6 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.25 6 5 4 1 2 3 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 0 to 0.1 0 to 0.1 0.25 0.6 0.3 0.6 4 Unbalanced input 50Ω 3 0.55±0.1 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 200Ω 1710 to 1880 MHz 10dB min. 180±10deg 0±2.0dB 1.2dB max. –40 to +85°C –40 to +85°C 4000pieces/reel 7 0. 0.3 Dimensions in mm Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 200Ω RETURN LOSS 0 1: 1710MHz –5 –13.78dB –10 2: 1795MHz –15 1 –23.34dB –20 3: 1880MHz –25 –24.36dB 2 3 –30 –35 –40 –45 –50 1600 1650 1700 1750 1800 1850 1900 1950 2000 Frequency (MHz) Insertion loss (dB) INSERTION LOSS 0 1: 1710MHz –0.5 –0.95dB 3 –1.0 2 1 2: 1795MHz –1.5 –0.75dB –2.0 3: 1880MHz –2.5 –0.70dB –3.0 –3.5 –4.0 –4.5 –5.0 1600 1650 1700 1750 1800 1850 1900 1950 2000 Frequency (MHz) AMPLITUDE BALANCE Amplitude balance (dB) ø0.3 Through-hole 5 1: 1710MHz 4 –0.45dB 3 2: 1795MHz 2 –0.11dB 1 3: 1880MHz 0 0.23dB 3 2 –1 1 –2 –3 –4 –5 1600 1650 1700 1750 1800 1850 1900 1950 2000 Frequency (MHz) PHASE BALANCE Phase balance (deg.) 0.3 205 1: 1710MHz 200 177.49deg. 195 2: 1795MHz 190 176.67deg. 185 3: 1880MHz 180 175.94deg. 175 1 2 3 170 165 160 155 1600 1650 1700 1750 1800 1850 1900 1950 2000 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (8/53) Multilayer Baluns, HHM Series HHM1732B1 For W-LAN SHAPES AND DIMENSIONS/CIRCUIT TERMINAL FUNCTIONS 0.6±0.1 5 4 1 2 3 0.55±0.1 6 0.8±0.1 1.6±0.1 6 5 4 Unbalanced input 50Ω 1 2 3 4 5 6 Balanced output 100Ω 1 2 3 0.3±0.1 0.1±0.1 0.25±0.1 Dimensions in mm RECOMMENDED PCB PATTERN ELECTRICAL CHARACTERISTICS 15 0. 95 0. 0.25 0.25 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 100Ω 4900 to 5950 MHz 10dB min. 180±10deg 0±2.0dB 1.0dB max. –40 to +85°C –40 to +85°C 4000pieces/reel 0.5 0.2 0.85 0.5 0.3 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. 0.3 Unbal Port Bal Port ø0.3 Through-hole Line width be designed to match 50Ω characteristic impedance depending on PCB material and thickness. Dimensions in mm FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 100Ω RETURN LOSS Return loss (dB) 0 1: 4900MHz –15.19dB 2: 5425MHz –20.34dB 3: 5950MHz –17.78dB –5 –10 –15 –20 1 3 2 –25 Amplitude balance (dB) AMPLITUDE BALANCE –30 4000 4250 4500 4750 5000 5250 5500 5750 6000 Frequency (MHz) 0 1: 4900MHz –0.5 –0.80dB 2 3 –1.0 1 2: 5425MHz –1.5 –0.55dB –2.0 3: 5950MHz –2.5 –0.69dB –3.0 –3.5 –4.0 –4.5 –5.0 4000 4250 4500 4750 5000 5250 5500 5750 6000 Frequency (MHz) PHASE BALANCE Phase balance (deg.) Insertion loss (dB) INSERTION LOSS 5 1: 4900MHz 4 –0.02dB 3 2: 5425MHz 2 0.34dB 1 3: 5950MHz 0 3 0.43dB 2 1 –1 –2 –3 –4 –5 4000 4250 4500 4750 5000 5250 5500 5750 6000 Frequency (MHz) 200 195 190 185 180 1 2 1: 4900MHz 185.81deg. 2: 5425MHz 185.56deg. 3 3: 5950MHz 184.97deg. 175 170 165 160 4000 4250 4500 4750 5000 5250 5500 5750 6000 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (9/53) Multilayer Baluns, HHM Series HHM1733B1 For W-LAN SHAPES AND DIMENSIONS/CIRCUIT 1.6±0.1 5 1 2 TERMINAL FUNCTIONS 0.6±0.1 6 4 0.8±0.1 6 4 Unbalanced input 50Ω 3 0.55±0.1 5 1 2 3 4 5 6 Balanced output 50Ω 1 2 3 0.3±0.1 0.1±0.1 0.25±0.1 Dimensions in mm RECOMMENDED PCB PATTERN ELECTRICAL CHARACTERISTICS 15 0. 95 0. 0.25 0.25 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 50Ω 4900 to 5950 MHz 10dB min. 180±10deg 0±1.0dB 1.2dB max. –40 to +85°C –40 to +85°C 4000pieces/reel 0.5 0.2 0.85 0.5 0.3 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. 0.3 Unbal Port Bal Port ø0.3 Through-hole Line width be designed to match 50Ω characteristic impedance depending on PCB material and thickness. Dimensions in mm FREQUENCY CHARCTERISTICS Unbalance 50Ω/Balance 50Ω RETURN LOSS AMPLITUDE BALANCE Return loss (dB) 1: 4900MHz –14.35dB 2: 5425MHz –24.85dB 3: 5950MHz –17.29dB –10 –15 1 3 –20 –25 2 Amplitude balance (dB) 3 0 –5 –0.5 2 1 1: 4900MHz –0.85dB 2: 5425MHz –0.60dB 3 3: 5950MHz –0.82dB –1.5 –2.0 4000 4250 4500 4750 5000 5250 5500 5750 6000 Frequency (MHz) Phase balance (deg.) Insertion loss (dB) 0 1 2 –1 –2 PHASE BALANCE 0 –1.0 1 1: 4900MHz 0.53dB 2: 5425MHz 0.48dB 3: 5950MHz 3 0.33dB –3 4000 4250 4500 4750 5000 5250 5500 5750 6000 Frequency (MHz) –30 4000 4250 4500 4750 5000 5250 5500 5750 6000 Frequency (MHz) INSERTION LOSS 2 200 195 190 185 180 1 2 1: 4900MHz 183.82deg. 2: 5425MHz 183.40deg. 3 3: 5950MHz 183.69deg. 175 170 165 160 4000 4250 4500 4750 5000 5250 5500 5750 6000 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (10/53) Multilayer Baluns, HHM Series HHM1743L1 For PDC1500/Local SHAPES AND DIMENSIONS/CIRCUIT 1.6±0.1 5 1 2 TERMINAL FUNCTIONS 0.6±0.1 6 4 0.8±0.1 6 1 2 3 4 5 6 Balanced output 100Ω 1 2 3 0.3±0.1 0.1±0.1 0.25±0.1 Unbalanced Port GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.25 6 5 4 1 2 3 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 0 to 0.1 0 to 0.1 0.25 0.6 0.3 0.6 4 Unbalanced input 50Ω 3 0.55±0.1 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 100Ω 1439 to 1468 MHz 10dB min. 180±15deg 0±1.5dB 1.0dB max. –40 to +85°C –40 to +85°C 4000pieces/reel 7 0. 0.3 Dimensions in mm Return loss (dB) FREQUENCY CHARCTERISTICS Unbalance 50Ω/Balance 100Ω RETURN LOSS 0 –5 –10 –15 –20 –25 –30 –35 –40 –45 –50 1300 AMPLITUDE BALANCE 1: 1439MHz –23.16dB 2: 1468MHz –22.98dB 2 1 1350 1400 1450 1500 Frequency (MHz) 1550 1600 Insertion loss (dB) INSERTION LOSS 0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 1300 5 4 3 2 1 0 –1 –2 –3 –4 –5 1300 1: 1439MHz –0.39dB 2: 1468MHz –0.83dB 1 1350 2 1400 1450 1500 Frequency (MHz) 1550 1600 PHASE BALANCE 1 1350 Amplitude balance (dB) ø0.3 Through-hole 1: 1439MHz –0.284dB 2: 1468MHz –0.285dB 2 1400 1450 1500 Frequency (MHz) 1550 1600 Phase balance (deg.) 0.3 205 200 195 190 185 180 175 170 165 160 155 1300 1: 1439MHz 184.8deg. 2: 1468MHz 184.6deg. 1 1350 2 1400 1450 1500 Frequency (MHz) 1550 1600 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (11/53) Multilayer Baluns, HHM Series HHM1748A2 For DCS/Tx+Rx SHAPES AND DIMENSIONS/CIRCUIT TERMINAL FUNCTIONS 0.6±0.1 6 5 4 1 2 3 6 0.8±0.1 1.6±0.1 Balanced output 150Ω 2 3 0.3±0.1 0.1±0.1 0.25±0.1 1 2 3 4 5 6 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.25 6 5 4 1 2 3 This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 0 to 0.1 0 to 0.1 0.25 0.6 0.3 0.6 4 Unbalanced input 50Ω 1 0.55±0.1 5 ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 150Ω 1710 to 1880 MHz 10dB min. 180±10deg 0±2.0dB 1.2dB max. –40 to +85°C –40 to +85°C 4000pieces/reel 7 0. 0.3 Dimensions in mm Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 150Ω RETURN LOSS 0 1: 1710MHz –5 –17.44dB –10 2: 1795MHz –15 –22.31dB 3 –20 1 3: 1880MHz –25 2 –16.51dB –30 –35 –40 –45 –50 1600 1650 1700 1750 1800 1850 1900 1950 2000 Frequency (MHz) Insertion loss (dB) INSERTION LOSS 0 1: 1710MHz –0.5 –0.66dB 2 3 1 –1.0 2: 1795MHz –1.5 –0.59dB –2.0 3: 1880MHz –2.5 –0.65dB –3.0 –3.5 –4.0 –4.5 –5.0 1600 1650 1700 1750 1800 1850 1900 1950 2000 Frequency (MHz) AMPLITUDE BALANCE Amplitude balance (dB) ø0.3 Through-hole 5 1: 1710MHz 4 –0.06dB 3 2: 1795MHz 2 0.24dB 1 3: 1880MHz 0 3 0.52dB 2 1 –1 –2 –3 –4 –5 1600 1650 1700 1750 1800 1850 1900 1950 2000 Frequency (MHz) PHASE BALANCE Phase balance (deg.) 0.3 205 1: 1710MHz 200 175.79deg. 195 2: 1795MHz 190 174.92deg. 185 3: 1880MHz 180 174.27deg. 175 1 2 3 170 165 160 155 1600 1650 1700 1750 1800 1850 1900 1950 2000 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (12/53) Multilayer Baluns, HHM Series HHM1752A1 For W-LAN SHAPES AND DIMENSIONS/CIRCUIT 1.6±0.1 5 1 2 TERMINAL FUNCTIONS 0.6±0.1 6 4 0.8±0.1 6 4 Unbalanced input 50Ω 3 0.55±0.1 5 1 2 3 4 5 6 Balanced output 200Ω 1 2 3 0.3±0.1 0.1±0.1 0.25±0.1 Dimensions in mm RECOMMENDED PCB PATTERN ELECTRICAL CHARACTERISTICS 15 0. 95 0. 0.25 0.25 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 200Ω 4900 to 5950 MHz 10dB min. 180±10deg 0±2.0dB 1.2dB max. –40 to +85°C –40 to +85°C 4000pieces/reel 0.5 0.2 0.85 0.5 0.3 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. 0.3 Unbal Port Bal Port ø0.3 Through-hole Line width be designed to match 50Ω characteristic impedance depending on PCB material and thickness. Dimensions in mm AMPLITUDE BALANCE 2 1: 4900MHz –32.46dB 2: 5425MHz –14.93dB 3 3: 5950MHz –12.46dB –25 –30 1 –35 –40 4000 4250 4500 4750 5000 5250 5500 5750 6000 Frequency (MHz) INSERTION LOSS Insertion loss (dB) 2 1 0 1 2 1: 4900MHz 0.27dB 2: 5425MHz 0.39dB 3: 5950MHz 3 0.38dB –1 –2 –3 4000 4250 4500 4750 5000 5250 5500 5750 6000 Frequency (MHz) PHASE BALANCE 0 –0.5 1 –1.0 Amplitude balance (dB) 3 0 –5 –10 –15 –20 2 1: 4900MHz –0.71dB 2: 5425MHz –0.65dB 3 3: 5950MHz –0.83dB –1.5 –2.0 4000 4250 4500 4750 5000 5250 5500 5750 6000 Frequency (MHz) Phase balance (deg.) Return loss (dB) FREQUENCY CHARCTERISTICS Unbalance 50Ω/Balance 200Ω RETURN LOSS 200 195 190 185 180 1: 4900MHz 181.21deg. 2: 5425MHz 181.81deg. 3: 5950MHz 3 181.62deg. 2 1 175 170 165 160 4000 4250 4500 4750 5000 5250 5500 5750 6000 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (13/53) Multilayer Baluns, HHM Series HHM1752A2 For W-LAN SHAPES AND DIMENSIONS/CIRCUIT 1.6±0.1 1 5 2 TERMINAL FUNCTIONS 0.6±0.1 6 4 0.8±0.1 6 4 Unbalanced input 50Ω 3 1 2 3 4 5 6 Balanced output 200Ω 1 0.55±0.1 5 2 3 0.3±0.1 0.1±0.1 0.25±0.1 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN ELECTRICAL CHARACTERISTICS 15 0. 95 0. 0.25 0.25 50Ω 200Ω 4900 to 5950 MHz 10dB min. 180±10deg 0±1.5dB 1.2dB max. –40 to +85°C –40 to +85°C 4000pieces/reel 0.5 0.2 0.85 0.5 0.3 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 0.3 Unbal Port Bal Port ø0.3 Through-hole Line width be designed to match 50Ω characteristic impedance depending on PCB material and thickness. Dimensions in mm FREQUENCY CHARCTERISTICS Unbalance 50Ω/Balance 200Ω RETURN LOSS 1: 4900.0MHz –16.16dB 2: 5425.0MHz –18.37dB 3: 5950.0MHz –13.44dB –5 –10 –15 –20 4500 5000 5500 Frequency (MHz) INSERTION LOSS Insertion loss (dB) 1 0 –1 –2 4500 5000 5500 Frequency (MHz) 1: 4900.0MHz –0.88dB 2: 5425.0MHz –0.66dB 3: 5950.0MHz –0.79dB –0.5 –1.0 –1.5 –2.0 –2.5 4500 5000 5500 Frequency (MHz) 6000 PHASE BALANCE 200 0 0.0 –3.0 4000 1: 4900.0MHz –0.01dB 2: 5425.0MHz 0.28dB 3: 5950.0MHz 0.36dB 2 –3 4000 6000 6000 Phase balance (deg) –25 4000 Amplitude balance (dB) 3 0 Return loss (dB) AMPLITUDE BALANCE 1: 4900.0MHz 181.46degrees 2: 5425.0MHz 181.18degrees 3: 5950.0MHz 179.85degrees 190 180 170 160 4000 4500 5000 5500 Frequency (MHz) 6000 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (14/53) Multilayer Baluns, HHM Series HHM1763A1 For EGSM SHAPES AND DIMENSIONS/CIRCUIT 1.6±0.1 1 5 2 TERMINAL FUNCTIONS 0.6±0.1 6 4 0.8±0.1 6 4 Unbalanced input 50Ω 3 1 2 3 4 5 6 Balanced output 150Ω 1 0.55±0.1 5 2 3 0.3±0.1 0.1±0.1 0.25±0.1 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN ELECTRICAL CHARACTERISTICS 0.25 6 5 4 1 2 3 This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 0 to 0.1 0 to 0.1 7 0. Dimensions in mm FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 150Ω RETURN LOSS Return loss (dB) 0 1: 880MHz –14.29dB 2: 920MHz –18.34dB 3: 960MHz –20.62dB –5 –10 1 –20 AMPLITUDE BALANCE 2 3 –25 850 900 950 1000 1050 1100 Frequency (MHz) Insertion loss (dB) INSERTION LOSS 0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 750 800 Amplitude balance (dB) ø0.3 Through-hole –30 750 800 50Ω 150Ω 880 to 960 MHz 10dB min. 180±10deg 0±1.0dB 1.4dB max. –40 to +85°C –40 to +85°C 4000pieces/reel 0.3 0.3 –15 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 1 5 4 3 2 1 0 –1 –2 –3 –4 –5 750 800 1 2 3 1: 880MHz –0.21dB 2: 920MHz –0.04dB 3: 960MHz 0.10dB 850 900 950 1000 1050 1100 Frequency (MHz) PHASE BALANCE 2 3 1: 880MHz –1.03dB 2: 920MHz –0.88dB 3: 960MHz –0.82dB 850 900 950 1000 1050 1100 Frequency (MHz) Phase balance (deg.) 0.6 0.3 0.6 0.25 200 195 190 185 180 175 170 165 160 750 800 1: 880MHz 177.13deg. 2: 920MHz 176.62deg. 3: 960MHz 176.08deg. 1 2 3 850 900 950 1000 1050 1100 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (15/53) Multilayer Baluns, HHM Series HHM1502 For DCS/Local SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.35±0.2 2 3 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm 0.2 This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 0.3 0.8 Balanced output 100Ω 1 2 3 4 5 6 0.3±0.2 RECOMMENDED PCB PATTERN 0.8 4 Unbalanced input 50Ω 3 0.65±0.2 5 ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 100Ω 1662±43 MHz 12dB min. 180±5deg. 0±1.0dB 0.8dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole Dimensions in mm Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 100Ω RETURN LOSS 0 1: 1619MHz –5 –17.64dB –10 2: 1662MHz –15 –18.41dB –20 1 2 3 3: 1705MHz –25 –19.00dB –30 –35 –40 –45 –50 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 2000 Frequency (MHz) Insertion loss (dB) INSERTION LOSS 0.0 1: 1619MHz –0.5 1 2 3 –0.459dB –1.0 2: 1662MHz –1.5 –0.440dB –2.0 3: 1705MHz –2.5 –0.444dB –3.0 –3.5 –4.0 –4.5 –5.0 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 2000 Frequency (MHz) AMPLITUDE BALANCE Amplitude balance (dB) 0.4 5 1: 1619MHz 4 0.162dB 3 2: 1662MHz 2 0.185dB 1 3: 1705MHz 0 0.239dB 1 2 3 –1 –2 –3 –4 –5 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 2000 Frequency (MHz) PHASE BALANCE Phase balance (deg.) 0.3 205 1: 1619MHz 200 181.0deg. 195 2: 1662MHz 190 181.2deg. 185 3: 1705MHz 180 181.1deg. 1 2 3 175 170 165 160 155 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 2000 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (16/53) Multilayer Baluns, HHM Series HHM1506 For W-CDMA/Tx-Rx SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.3 3 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 Unbalanced impedance Balanced impedance 50Ω 100Ω 1920 to 1980, 2110 to 2170MHz 10dB min. 180±10deg. 0±2.0dB 1.0dB max. –40 to +85°C –40 to +85°C 2000pieces/reel Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 0.6 0.9 2 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.8 Balanced output 100Ω 0.3±0.2 0.35±0.2 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 7 0. ø0.3 Through-hole 0.3 Dimensions in mm 0 –5 –10 –15 –20 –25 –30 –35 –40 –45 –50 1700 1 1800 2 3 1900 2000 2100 Frequency (MHz) 4 2200 AMPLITUDE BALANCE 1: 1920MHz –16.83dB 2: 1980MHz –16.30dB 3: 2110MHz –15.09dB 4: 2170MHz –14.72dB 2300 Insertion loss (dB) INSERTION LOSS 0.0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 1700 1 1800 5 4 3 2 1 0 –1 –2 –3 –4 –5 1700 1 1800 2 3 1900 2000 2100 Frequency (MHz) 1: 1920MHz –0.41dB 2: 1980MHz –0.35dB 3: 2110MHz –0.25dB 4: 2170MHz –0.21dB 4 2200 2300 PHASE BALANCE 2 3 1900 2000 2100 Frequency (MHz) 4 2200 1: 1920MHz –0.57dB 2: 1980MHz –0.60dB 3: 2110MHz –0.66dB 4: 2170MHz –0.67dB 2300 Phase balance (deg.) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 100Ω RETURN LOSS Amplitude balance (dB) 0.4 205 200 195 190 185 180 175 170 165 160 155 1700 1 1800 2 3 1900 2000 2100 Frequency (MHz) 1: 1920MHz 183.7deg. 2: 1980MHz 184.1deg. 3: 2110MHz 185.0deg. 4: 2170MHz 185.4deg. 4 2200 2300 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (17/53) Multilayer Baluns, HHM Series HHM1509 For EGSM-DCS/Local SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.35±0.2 2 3 1 2 3 4 5 6 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm 0.2 This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 0.3 0.8 Balanced output 200Ω 0.3±0.2 RECOMMENDED PCB PATTERN 0.8 4 Unbalanced input 50Ω 3 0.65±0.2 5 ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 200Ω 1275 to 1525MHz 10dB min. 180±10deg. 0±2.0dB 1.0dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole Dimensions in mm Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 200Ω RETURN LOSS 0 1: 1275MHz –5 –24.66dB –10 2: 1400MHz –15 –36.83dB –20 3: 1525MHz –25 –29.34dB 1 –30 3 –35 –40 2 –45 –50 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 Frequency (MHz) Insertion loss (dB) INSERTION LOSS 0.0 1: 1275MHz –0.5 –0.642dB 2 1 3 –1.0 2: 1400MHz –1.5 –0.637dB –2.0 3: 1525MHz –2.5 –0.665dB –3.0 –3.5 –4.0 –4.5 –5.0 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 Frequency (MHz) AMPLITUDE BALANCE Amplitude balance (dB) 0.4 5 1: 1275MHz 4 –0.264dB 3 2: 1400MHz 2 0.007dB 1 3: 1525MHz 0 0.205dB 3 2 1 –1 –2 –3 –4 –5 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 Frequency (MHz) PHASE BALANCE Phase balance (deg.) 0.3 205 1: 1275MHz 200 180.2deg. 195 2: 1400MHz 190 180.0deg. 185 3: 1525MHz 180 180.6deg. 3 1 2 175 170 165 160 155 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (18/53) Multilayer Baluns, HHM Series HHM1515B2 For EGSM/Tx-Rx SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.35±0.2 2 3 1 2 3 4 5 6 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm 0.2 This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 0.3 0.8 Balanced output 200Ω 0.3±0.2 RECOMMENDED PCB PATTERN 0.8 4 Unbalanced input 50Ω 3 0.65±0.2 5 ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 200Ω 880 to 960MHz 10dB min. 180±10deg. 0±1.0dB 1.0dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole Dimensions in mm Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 200Ω RETURN LOSS 0 1: 880MHz –5 –22.77dB –10 2: 920MHz –15 –28.21dB –20 3: 960MHz 3 –25 –21.37dB 1 –30 2 –35 –40 –45 –50 800 820 840 860 880 900 920 940 960 980 1000 Frequency (MHz) Insertion loss (dB) INSERTION LOSS 0 1: 880MHz –1 2 3 1 –0.65dB –2 2: 920MHz –3 –0.60dB –4 3: 960MHz –5 –0.63dB –6 –7 –8 –9 –10 800 820 840 860 880 900 920 940 960 980 1000 Frequency (MHz) AMPLITUDE BALANCE Amplitude balance (dB) 0.4 5 1: 880MHz 4 0.060dB 3 2: 920MHz 2 0.060dB 1 3: 960MHz 0 0.069dB 3 2 1 –1 –2 –3 –4 –5 800 820 840 860 880 900 920 940 960 980 1000 Frequency (MHz) PHASE BALANCE Phase balance (deg.) 0.3 200 1: 880MHz 195 179.2deg. 190 2: 920MHz 179.3deg. 185 3: 960MHz 180 179.4deg. 3 2 1 175 170 165 160 800 820 840 860 880 900 920 940 960 980 1000 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (19/53) Multilayer Baluns, HHM Series HHM1516 For DCS-PCS/Tx-Rx SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.35±0.2 2 3 1 2 3 4 5 6 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm 0.2 This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 0.3 0.8 Balanced output 200Ω 0.3±0.2 RECOMMENDED PCB PATTERN 0.8 4 Unbalanced input 50Ω 3 0.65±0.2 5 ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 200 Ω 1710 to 1990MHz 10dB Min. 180±10deg. 0±1.0dB 1.0dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole Dimensions in mm Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 200Ω RETURN LOSS 0 1: 1710MHz –5 –27.78dB –10 2: 1850MHz –15 –21.79dB –20 3: 1990MHz 3 2 –25 –19.00dB –30 1 –35 –40 –45 –50 1600 1650 1700 1750 1800 1850 1900 1950 2000 2050 2100 Frequency (MHz) Insertion loss (dB) INSERTION LOSS 0.0 1: 1710MHz –0.5 –0.580dB 2 1 3 –1.0 2: 1850MHz –1.5 –0.574dB –2.0 3: 1990MHz –2.5 –0.633dB –3.0 –3.5 –4.0 –4.5 –5.0 1600 1650 1700 1750 1800 1850 1900 1950 2000 2050 2100 Frequency (MHz) AMPLITUDE BALANCE Amplitude balance (dB) 0.4 5 1: 1710MHz 4 0.097dB 3 2: 1850MHz 2 0.028dB 1 3: 1990MHz 0 –0.169dB 2 1 3 –1 –2 –3 –4 –5 1600 1650 1700 1750 1800 1850 1900 1950 2000 2050 2100 Frequency (MHz) PHASE BALANCE Phase balance (deg.) 0.3 205 1: 1710MHz 200 179.2deg. 195 2: 1850MHz 190 180.2deg. 185 3: 1990MHz 180 181.2deg. 3 2 1 175 170 165 160 155 1600 1650 1700 1750 1800 1850 1900 1950 2000 2050 2100 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (20/53) Multilayer Baluns, HHM Series HHM1517 For Bluetooth&IEEE802.11b/g SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 TERMINAL FUNCTIONS 0.95±0.1 6 4 +0.1 0.25–0.2 1.25±0.15 6 1 2 0.2±0.2 1 0.3 3 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 2 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.8 Balanced output 50Ω 0.3±0.2 0.35±0.2 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 50 Ω 2400 to 2500MHz 10dB min. 180±10deg. 0±2.0dB 1.2dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole 0.3 Dimensions in mm 0 –5 –10 –15 –20 –25 –30 –35 –40 –45 –50 2100 AMPLITUDE BALANCE 1: 2400MHz –17.71dB 2: 2500MHz –14.48dB 2 1 2200 2300 2400 2500 Frequency (MHz) 2600 2700 Insertion loss (dB) INSERTION LOSS 0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 2100 1 2200 5 4 3 2 1 0 –1 –2 –3 –4 –5 2100 1: 2400MHz 0.65dB 2: 2500MHz 0.61dB 1 2200 2 2300 2400 2500 Frequency (MHz) 2600 2700 PHASE BALANCE 1: 2400MHz –0.75dB 2: 2500MHz –0.93dB 2 2300 2400 2500 Frequency (MHz) 2600 2700 Phase balance (deg.) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 50Ω RETURN LOSS Amplitude balance (dB) 0.4 205 200 195 190 185 180 175 170 165 160 155 2100 1: 2400MHz 178.7deg. 2: 2500MHz 177.6deg. 1 2200 2 2300 2400 2500 Frequency (MHz) 2600 2700 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (21/53) Multilayer Baluns, HHM Series HHM1517A2 For Bluetooth&IEEE802.11b/g SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 TERMINAL FUNCTIONS 0.95±0.1 6 4 +0.1 0.25–0.2 1.25±0.15 6 1 2 0.2±0.2 1 0.3 3 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 2 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.8 Balanced output 50Ω 0.3±0.2 0.35±0.2 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 50Ω 2300 to 2500MHz 10dB min. 180±10deg. 0±2.0dB 1.2dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole 0.3 Dimensions in mm 0 –5 –10 –15 –20 –25 –30 –35 –40 –45 –50 2100 2200 AMPLITUDE BALANCE 1: 2300.0MHz –22.83dB 2: 2500.0MHz –14.48dB 2300 2400 2500 Frequency (MHz) 2600 2700 Insertion loss (dB) INSERTION LOSS 0.0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 2100 2200 5 4 3 2 1 0 –1 –2 –3 –4 –5 2100 2200 1: 2300.0MHz 0.64dB 2: 2500.0MHz 0.61dB 2300 2400 2500 Frequency (MHz) 2600 2700 PHASE BALANCE 1: 2300.0MHz –0.63dB 2: 2500.0MHz –0.93dB 2300 2400 2500 Frequency (MHz) Amplitude balance (dB) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 50Ω RETURN LOSS 2600 2700 Phase balance (deg) 0.4 205 200 195 190 185 180 175 170 165 160 155 2100 2200 1: 2300.0MHz 179.40degrees 2: 2500.0MHz 177.61degrees 2300 2400 2500 Frequency (MHz) 2600 2700 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (22/53) Multilayer Baluns, HHM Series HHM1518A3 For DCS-PCS/Tx-Rx SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.35±0.2 2 3 1 2 3 4 5 6 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm 0.2 This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 0.3 0.8 Balanced output 150Ω 0.3±0.2 RECOMMENDED PCB PATTERN 0.8 4 Unbalanced input 50Ω 3 0.65±0.2 5 ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 150Ω 1710 to 1990MHz 10dB min. 180±10deg. 0±1.0dB 1.0dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole Dimensions in mm Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 150Ω RETURN LOSS 0 1: 1710MHz –5 –20.71dB –10 2: 1850MHz –15 –19.68dB –20 3: 1990MHz 2 3 1 –25 –19.87dB –30 –35 –40 –45 –50 1600 1650 1700 1750 1800 1850 1900 1950 2000 2050 2100 Frequency (MHz) Insertion loss (dB) INSERTION LOSS 0.0 1: 1710MHz –0.5 –0.544dB 1 2 3 –1.0 2: 1850MHz –1.5 –0.580dB –2.0 3: 1990MHz –2.5 –0.611dB –3.0 –3.5 –4.0 –4.5 –5.0 1600 1650 1700 1750 1800 1850 1900 1950 2000 2050 2100 Frequency (MHz) AMPLITUDE BALANCE Amplitude balance (dB) 0.4 5 1: 1710MHz 4 0.265dB 3 2: 1850MHz 2 0.222dB 1 3: 1990MHz 0 0.101dB 2 1 3 –1 –2 –3 –4 –5 1600 1650 1700 1750 1800 1850 1900 1950 2000 2050 2100 Frequency (MHz) PHASE BALANCE Phase balance (deg.) 0.3 205 1: 1710MHz 200 177.8deg. 195 2: 1850MHz 190 178.9deg. 185 3: 1990MHz 180 179.8deg. 3 2 175 1 170 165 160 155 1600 1650 1700 1750 1800 1850 1900 1950 2000 2050 2100 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (23/53) Multilayer Baluns, HHM Series HHM1520 For Bluetooth&IEEE802.11b/g SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.3 3 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 2 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.8 Balanced output 100Ω 0.3±0.2 0.35±0.2 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 100Ω 2400 to 2500MHz 10dB min. 180±10deg. 0±2.0dB 1.0dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole 0.3 Dimensions in mm 0 –5 –10 –15 –20 –25 –30 –35 –40 –45 –50 2100 AMPLITUDE BALANCE 1: 2400MHz –36.54dB 2: 2500MHz –29.13dB 2 1 2200 2300 2400 2500 Frequency (MHz) 2600 2700 Insertion loss (dB) INSERTION LOSS 0.0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 2100 1 2200 5 4 3 2 1 0 –1 –2 –3 –4 –5 2100 1: 2400MHz –0.17dB 2: 2500MHz –0.54dB 1 2200 2 2300 2400 2500 Frequency (MHz) 2600 2700 PHASE BALANCE 1: 2400MHz –0.64dB 2: 2500MHz –0.73dB 2 2300 2400 2500 Frequency (MHz) 2600 2700 Phase balance (deg.) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 100Ω RETURN LOSS Amplitude balance (dB) 0.4 205 200 195 190 185 180 175 170 165 160 155 2100 1: 2400MHz 184.5deg. 2: 2500MHz 184.6deg. 1 2200 2 2300 2400 2500 Frequency (MHz) 2600 2700 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (24/53) Multilayer Baluns, HHM Series HHM1520A2 For Bluetooth&IEEE802.11b/g SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.35±0.2 2 3 1 2 3 4 5 6 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm 0.2 This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 0.3 0.8 Balanced output 100Ω 0.3±0.2 RECOMMENDED PCB PATTERN 0.8 4 Unbalanced input 50Ω 3 0.65±0.2 5 ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 100Ω 2300 to 2500MHz 10dB min. 180±10deg. 0±2.0dB 1.0dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole Dimensions in mm Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 100Ω RETURN LOSS 0 1: 2300MHz –5 –13.77dB –10 2: 2400MHz –15 –13.47dB –20 3: 2500MHz –25 –13.12dB –30 –35 –40 –45 –50 2100 2200 2300 2400 2500 2600 2700 2800 Frequency (MHz) Insertion loss (dB) INSERTION LOSS 0.0 1: 2300MHz –0.5 –0.68dB –1.0 2: 2400MHz –1.5 –0.70dB –2.0 3: 2500MHz –2.5 –0.73dB –3.0 –3.5 –4.0 –4.5 –5.0 2100 2200 2300 2400 2500 2600 2700 2800 Frequency (MHz) AMPLITUDE BALANCE Amplitude balance (dB) 0.4 5 1: 2300MHz 4 0.08dB 3 2: 2400MHz 2 –0.03dB 1 3: 2500MHz 0 –0.23dB –1 –2 –3 –4 –5 2100 2200 2300 2400 2500 2600 2700 2800 Frequency (MHz) PHASE BALANCE Phase balance (deg) 0.3 205 1: 2300MHz 200 185.3degrees 195 2: 2400MHz 190 184.9deg 185 3: 2500degrees 180 184.6deg 175 170 165 160 155 2100 2200 2300 2400 2500 2600 2700 2800 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (25/53) Multilayer Baluns, HHM Series HHM1521 For Bluetooth&IEEE802.11b/g SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.3 3 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 2 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.8 Balanced output 200Ω 0.3±0.2 0.35±0.2 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 200Ω 2400 to 2500MHz 10dB min. 180±10deg. 0±2.0dB 1.0dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole 0.3 Dimensions in mm FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 200Ω RETURN LOSS AMPLITUDE BALANCE 1: 2400MHz –13.08dB 2: 2500MHz –14.96dB –5 –10 –15 1 2 –20 –25 –30 2100 2200 2300 2400 2500 Frequency (MHz) 2600 2700 Insertion loss (dB) INSERTION LOSS 0.0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 2100 1 2200 5 4 3 2 1 0 –1 –2 –3 –4 –5 2100 1: 2400MHz –0.45dB 2: 2500MHz –0.57dB 1 2200 2 2300 2400 2500 Frequency (MHz) 2600 2700 PHASE BALANCE 1: 2400MHz –0.82dB 2: 2500MHz –0.76dB 2 2300 2400 2500 Frequency (MHz) 2600 2700 Phase balance (deg.) Return loss (dB) 0 Amplitude balance (dB) 0.4 205 200 195 190 185 180 175 170 165 160 155 2100 1: 2400MHz 180.7deg. 2: 2500MHz 181.3deg. 1 2200 2 2300 2400 2500 Frequency (MHz) 2600 2700 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (26/53) Multilayer Baluns, HHM Series HHM1521A2 For Bluetooth&IEEE802.11b/g SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.3 3 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 2 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.8 Balanced output 200Ω 0.3±0.2 0.35±0.2 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 200Ω 2300 to 2500MHz 9.5dB min. 180±10deg. 0±2.0dB 1.1dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole 0.3 Dimensions in mm 0 –5 –10 –15 –20 –25 –30 –35 –40 –45 –50 2100 2200 AMPLITUDE BALANCE 1: 2300.0MHz –11.88dB 2: 2500.0MHz –14.96dB 2300 2400 2500 Frequency (MHz) 2600 2700 Insertion loss (dB) INSERTION LOSS 0.0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 2100 2200 5 4 3 2 1 0 –1 –2 –3 –4 –5 2100 2200 1: 2300.0MHz –0.33dB 2: 2500.0MHz –0.57dB 2300 2400 2500 Frequency (MHz) 2600 2700 PHASE BALANCE 1: 2300.0MHz –0.86dB 2: 2500.0MHz –0.76dB 2300 2400 2500 Frequency (MHz) Amplitude balance (dB) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 200Ω RETURN LOSS 2600 2700 Phase balance (deg) 0.4 205 200 195 190 185 180 175 170 165 160 155 2100 2200 1: 2300.0MHz 179.99degrees 2: 2500.0MHz 181.26degrees 2300 2400 2500 Frequency (MHz) 2600 2700 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (27/53) Multilayer Baluns, HHM Series HHM1522A7 For AGSM/Tx-Rx SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.35±0.2 2 3 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 0.3 0.8 Balanced output 50Ω 0.3±0.2 RECOMMENDED PCB PATTERN 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 50Ω 824 to 894MHz 10dB min. 180±10deg. 0±1.0dB 1.4dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole 0.3 Dimensions in mm 0 –5 –10 –15 –20 –25 –30 –35 –40 –45 –50 700 1 750 2 1: 824MHz –23.30dB 2: 859MHz –25.70dB 3: 894MHz –23.32dB 3 800 850 900 Frequency (MHz) AMPLITUDE BALANCE 950 1000 INSERTION LOSS Insertion loss (dB) 0 –1 1 2 1: 824MHz –1.03dB 2: 859MHz –1.01dB 3: 894MHz –1.02dB 3 –2 –3 –4 –5 700 750 5 4 3 2 1 0 –1 –2 –3 –4 –5 700 1 750 2 1: 824MHz 0.120dB 2: 859MHz 0.150dB 3: 894MHz 0.184dB 3 800 850 900 Frequency (MHz) 950 1000 PHASE BALANCE 800 850 900 Frequency (MHz) 950 1000 Phase balance (deg.) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 50Ω RETURN LOSS Amplitude balance (dB) 0.4 200 195 190 185 180 175 170 165 160 700 1 750 2 1: 824MHz 180.2deg. 2: 859MHz 180.4deg. 3: 894MHz 180.4deg. 3 800 850 900 Frequency (MHz) 950 1000 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (28/53) Multilayer Baluns, HHM Series HHM1522B1 For EGSM/Tx-Rx SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.3 3 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 2 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.8 Balanced output 50Ω 0.3±0.2 0.35±0.2 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 50Ω 880 to 960MHz 12dB min. 180±10deg. 0±1.0dB 1.3dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole 0.3 Dimensions in mm 0 –5 –10 –15 –20 –25 –30 –35 –40 700 AMPLITUDE BALANCE 1: 880MHz –23.68dB 2: 920MHz –24.99dB 3: 960MHz –22.03dB 1 800 2 3 900 1000 Frequency (MHz) 1100 1200 Insertion loss (dB) INSERTION LOSS 0.0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 700 5 4 3 2 1 0 –1 –2 –3 –4 –5 700 1 800 2 1: 880MHz 0.45dB 2: 920MHz 0.47dB 3: 960MHz 0.49dB 3 900 1000 Frequency (MHz) 1100 200 1 800 1200 PHASE BALANCE 2 1: 880MHz –0.96dB 2: 920MHz –0.96dB 3: 960MHz –0.97dB 3 900 1000 Frequency (MHz) 1100 1200 Phase balance (deg.) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 50Ω RETURN LOSS Amplitude balance (dB) 0.4 1: 880MHz 180.74deg. 2: 920MHz 180.75deg. 3: 960MHz 180.84deg. 190 180 1 2 3 170 160 700 800 900 1000 Frequency (MHz) 1100 1200 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (29/53) Multilayer Baluns, HHM Series HHM1523B3 For AGSM/Tx-Rx SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 TERMINAL FUNCTIONS 0.95±0.1 6 4 +0.1 0.25–0.2 1.25±0.15 6 1 2 0.2±0.2 1 0.3 3 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 2 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.8 Balanced output 100Ω 0.3±0.2 0.35±0.2 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 100Ω 824 to 894MHz 10dB min. 180±10deg. 0±1.0dB 1.2dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole 0.3 Dimensions in mm 0 –5 –10 –15 –20 –25 –30 –35 –40 –45 –50 700 1 750 2 AMPLITUDE BALANCE 1: 824MHz –19.26dB 2: 859MHz –19.92dB 3: 894MHz –20.00dB 3 800 850 900 Frequency (MHz) 950 1000 Insertion loss (dB) INSERTION LOSS 0.0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 700 1 750 5 4 3 2 1 0 –1 –2 –3 –4 –5 700 1: 824MHz –0.240dB 2: 859MHz –0.310dB 3: 894MHz –0.374dB 1 750 2 3 800 850 900 Frequency (MHz) 950 1000 PHASE BALANCE 2 1: 824MHz –0.85dB 2: 859MHz –0.83dB 3: 894MHz –0.84dB 3 800 850 900 Frequency (MHz) 950 1000 Phase balance (deg.) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 100Ω RETURN LOSS Amplitude balance (dB) 0.4 200 195 190 185 180 175 170 165 160 700 1 750 2 1: 824MHz 181.2deg. 2: 859MHz 181.1deg. 3: 894MHz 181.3deg. 3 800 850 900 Frequency (MHz) 950 1000 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (30/53) Multilayer Baluns, HHM Series HHM1523C1 For EGSM/Tx-Rx SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.35±0.2 2 3 1 2 3 4 5 6 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm 0.2 This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 0.3 0.8 Balanced output 100Ω 0.3±0.2 RECOMMENDED PCB PATTERN 0.8 4 Unbalanced input 50Ω 3 0.65±0.2 5 ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 100Ω 880 to 960MHz 10dB min. 180±10deg. 0±1.0dB 1.1dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole Dimensions in mm Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 100Ω RETURN LOSS 0 1: 880MHz –5 –19.78dB –10 2: 920MHz –15 –21.30dB –20 3: 960MHz 1 2 –25 3 –22.04dB –30 –35 –40 –45 –50 800 820 840 860 880 900 920 940 960 980 1000 Frequency (MHz) Insertion loss (dB) INSERTION LOSS 0 1: 880MHz –0.5 –0.80dB –1 3 2 1 2: 920MHz –1.5 –0.78dB –2 3: 960MHz –2.5 –0.77dB –3 –3.5 –4 –4.5 –5 800 820 840 860 880 900 920 940 960 980 1000 Frequency (MHz) AMPLITUDE BALANCE Amplitude balance (dB) 0.4 5 1: 880MHz 4 0.370dB 3 2: 920MHz 2 0.450dB 1 3: 960MHz 0 3 2 1 0.515dB –1 –2 –3 –4 –5 800 820 840 860 880 900 920 940 960 980 1000 Frequency (MHz) PHASE BALANCE Phase balance (deg.) 0.3 200 1: 880MHz 195 180.7deg. 190 2: 920MHz 180.7deg. 185 3: 960MHz 180 180.8deg. 3 2 1 175 170 165 160 800 820 840 860 880 900 920 940 960 980 1000 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (31/53) Multilayer Baluns, HHM Series HHM1524B1 For EGSM/Tx-Rx SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.35±0.2 2 3 1 2 3 4 5 6 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm 0.2 This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 0.3 0.8 Balanced output 150Ω 0.3±0.2 RECOMMENDED PCB PATTERN 0.8 4 Unbalanced input 50Ω 3 0.65±0.2 5 ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 150Ω 880 to 960MHz 10dB min. 180±10deg. 0±1.0dB 1.0dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole Dimensions in mm Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 150Ω RETURN LOSS 0 1: 880MHz –5 –16.57dB –10 2: 920MHz –15 –16.75dB 3 1 2 –20 3: 960MHz –25 –15.83dB –30 –35 –40 –45 –50 800 820 840 860 880 900 920 940 960 980 1000 Frequency (MHz) Insertion loss (dB) INSERTION LOSS 0.0 1: 880MHz –0.5 –0.68dB 2 3 1 –1.0 2: 920MHz –1.5 –0.66dB –2.0 3: 960MHz –2.5 –0.67dB –3.0 –3.5 –4.0 –4.5 –5.0 800 820 840 860 880 900 920 940 960 980 1000 Frequency (MHz) AMPLITUDE BALANCE Amplitude balance (dB) 0.4 5 1: 880MHz 4 0.250dB 3 2: 920MHz 2 0.260dB 1 3: 960MHz 0 0.279dB 3 2 1 –1 –2 –3 –4 –5 800 820 840 860 880 900 920 940 960 980 1000 Frequency (MHz) PHASE BALANCE Phase balance (deg.) 0.3 200 1: 880MHz 195 178.3deg. 190 2: 920MHz 178.3deg. 185 3: 960MHz 180 178.3deg. 2 3 1 175 170 165 160 800 820 840 860 880 900 920 940 960 980 1000 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (32/53) Multilayer Baluns, HHM Series HHM1524B4 For AGSM/Tx-Rx SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.35±0.2 2 3 1 2 3 4 5 6 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm 0.2 This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 0.3 0.8 Balanced output 150Ω 0.3±0.2 RECOMMENDED PCB PATTERN 0.8 4 Unbalanced input 50Ω 3 0.65±0.2 5 ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 150Ω 824 to 894MHz 10dB min. 180±10deg. 0±1.0dB 1.0dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole Dimensions in mm Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 150Ω RETURN LOSS 0 1: 824MHz –5 –14.15dB –10 2: 859MHz –15 1 –15.89dB 2 3 –20 3: 894MHz –25 –16.78dB –30 –35 –40 –45 –50 750 770 790 810 830 850 870 890 910 930 950 Frequency (MHz) Insertion loss (dB) INSERTION LOSS 0.0 1: 824MHz –0.5 –0.79dB 3 –1.0 2 1 2: 859MHz –1.5 –0.71dB –2.0 3: 894MHz –2.5 –0.67dB –3.0 –3.5 –4.0 –4.5 –5.0 750 770 790 810 830 850 870 890 910 930 950 Frequency (MHz) AMPLITUDE BALANCE Amplitude balance (dB) 0.4 5 1: 824MHz 4 0.220dB 3 2: 859MHz 2 0.240dB 1 3: 894MHz 0 0.256dB 3 2 1 –1 –2 –3 –4 –5 750 770 790 810 830 850 870 890 910 930 950 Frequency (MHz) PHASE BALANCE Phase balance (deg.) 0.3 200 1: 824MHz 195 178.4deg. 190 2: 859MHz 178.3deg. 185 3: 894MHz 180 178.2deg. 1 2 3 175 170 165 160 750 770 790 810 830 850 870 890 910 930 950 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (33/53) Multilayer Baluns, HHM Series HHM1525 For DCS-PCS/Tx-Rx SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 TERMINAL FUNCTIONS 0.95±0.1 6 4 +0.1 0.25–0.2 1.25±0.15 6 1 2 0.2±0.2 1 0.3 3 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 2 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.8 Balanced output 50Ω 0.3±0.2 0.35±0.2 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 50Ω 1710 to 1990MHz 10dB min. 180±10deg. 0±1.0dB 1.0dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole 0.3 Dimensions in mm 0 –5 –10 –15 –20 –25 –30 –35 –40 –45 –50 1600 1 1700 2 1800 1900 Frequency (MHz) 3 2000 AMPLITUDE BALANCE 1: 1710MHz –12.83dB 2: 1850MHz –14.86dB 3: 1990MHz –15.09dB 2100 Insertion loss (dB) INSERTION LOSS 0.0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 1600 5.0 4.0 3.0 2.0 1.0 0.0 –1.0 –2.0 –3.0 –4.0 –5.0 1600 2 1 1700 1800 1900 Frequency (MHz) 3 2000 195 1 1700 1: 1710MHz 0.33dB 2: 1850MHz 0.50dB 3: 1990MHz 0.69dB 2100 PHASE BALANCE 2 1800 1900 Frequency (MHz) 3 2000 1: 1710MHz –0.70dB 2: 1850MHz –0.59dB 3: 1990MHz –0.58dB 2100 Phase balance (deg.) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 50Ω RETURN LOSS Amplitude balance (dB) 0.4 190 185 180 175 1 2 3 1: 1710MHz 179.12deg. 2: 1850MHz 179.33deg. 3: 1990MHz 179.38deg. 170 165 1600 1700 1800 1900 Frequency (MHz) 2000 2100 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (34/53) Multilayer Baluns, HHM Series HHM1526 For DCS-PCS/Tx-Rx SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.3 3 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 2 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.8 Balanced output 100Ω 0.3±0.2 0.35±0.2 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 100Ω 1710 to 1990MHz 10dB min. 180±9deg. 0±1.0dB 0.8dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole 0.3 Dimensions in mm 0 –5 –10 –15 –20 –25 –30 –35 –40 –45 –50 1600 1 1700 2 1800 1900 Frequency (MHz) 3 2000 AMPLITUDE BALANCE 1: 1710MHz –12.72dB 2: 1850MHz –14.63dB 3: 1990MHz –17.14dB 2100 Insertion loss (dB) INSERTION LOSS 0.0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 1600 1 1700 5 4 3 2 1 0 –1 –2 –3 –4 –5 1600 2 1 1700 1800 1900 Frequency (MHz) 3 2000 1: 1710MHz –0.70dB 2: 1850MHz –0.31dB 3: 1990MHz –0.07dB 2100 PHASE BALANCE 2 1800 1900 Frequency (MHz) 3 2000 1: 1710MHz –0.55dB 2: 1850MHz –0.49dB 3: 1990MHz –0.47dB 2100 Phase balance (deg.) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 100Ω RETURN LOSS Amplitude balance (dB) 0.4 200 195 190 185 180 175 170 165 160 1600 1 1700 2 1800 1900 Frequency (MHz) 3 2000 1: 1710MHz 184.3deg. 2: 1850MHz 185.0deg. 3: 1990MHz 185.4deg. 2100 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (35/53) Multilayer Baluns, HHM Series HHM1533 For W-CDMA/Tx-Rx SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.3 3 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 Unbalanced impedance Balanced impedance 50Ω 50Ω 1920 to 1980, 2110 to 2170MHz 10dB min. 180±10deg. 0±2.0dB 0.8dB max. –40 to +85°C –40 to +85°C 2000pieces/reel Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 0.6 0.9 2 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.8 Balanced output 50Ω 0.3±0.2 0.35±0.2 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 7 0. ø0.3 Through-hole 0.3 Dimensions in mm 0 –5 –10 –15 –20 –25 –30 –35 –40 –45 –50 1800 1 1: 1920MHz –16.32dB 2: 1980MHz –18.79dB 3: 2110MHz –26.03dB 4: 2170MHz –33.99dB 2 3 4 1900 2000 2100 Frequency (MHz) AMPLITUDE BALANCE 2200 2300 Insertion loss (dB) INSERTION LOSS 0.0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 1800 1 1900 2 5 4 3 2 1 0 –1 –2 –3 –4 –5 1800 1 1900 2 3 2000 2100 Frequency (MHz) 1: 1920MHz –0.118dB 2: 1980MHz –0.074dB 3: 1880MHz 0.004dB 4: 2110MHz 0dB 4 2200 2300 PHASE BALANCE 3 2000 2100 Frequency (MHz) 4 2200 1: 1920MHz –0.56dB 2: 1980MHz –0.55dB 3: 2110MHz –0.58dB 4: 2170MHz –33.99dB 2300 Phase balance (deg.) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 50Ω RETURN LOSS Amplitude balance (dB) 0.4 205 200 195 190 185 180 175 170 165 160 155 1800 1 1900 2 3 2000 2100 Frequency (MHz) 4 2200 1: 1920MHz 180.9deg. 2: 1980MHz 181.3deg. 3: 2110MHz 181.4deg. 4: 2170MHz 181.3deg. 2300 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (36/53) Multilayer Baluns, HHM Series HHM1534 For W-CDMA/Tx-Rx SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.3 3 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 Unbalanced impedance Balanced impedance 50Ω 200Ω 1920 to 1980, 2110 to 2170MHz 10dB min. 180±10deg. 0±2.0dB 1.0dB max. –40 to +85°C –40 to +85°C 2000pieces/reel Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 0.6 0.9 2 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.8 Balanced output 200Ω 0.3±0.2 0.35±0.2 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 7 0. ø0.3 Through-hole 0.3 Dimensions in mm 0 –5 –10 –15 –20 –25 –30 –35 –40 –45 –50 1700 1 1800 2 3 1900 2000 2100 Frequency (MHz) 4 2200 AMPLITUDE BALANCE 1: 1920MHz –20.12dB 2: 1980MHz –19.10dB 3: 2110MHz –17.18dB 4: 2170MHz –16.73dB 2300 Insertion loss (dB) INSERTION LOSS 0.0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 1700 1 1800 5 4 3 2 1 0 –1 –2 –3 –4 –5 1700 1 1800 2 3 1900 2000 2100 Frequency (MHz) 1: 1920MHz –0.04dB 2: 1980MHz –0.09dB 3: 2110MHz –0.32dB 4: 2170MHz –0.43dB 4 2200 2300 PHASE BALANCE 2 3 1900 2000 2100 Frequency (MHz) 4 2200 1: 1920MHz –0.60dB 2: 1980MHz –0.62dB 3: 2110MHz –0.68dB 4: 2170MHz –0.72dB 2300 Phase balance (deg.) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 200Ω RETURN LOSS Amplitude balance (dB) 0.4 200 195 190 185 180 175 170 165 160 1700 1 1800 2 3 1900 2000 2100 Frequency (MHz) 1: 1920MHz 180.9deg. 2: 1980MHz 181.6deg. 3: 2110MHz 182.7deg. 4: 2170MHz 183.0deg. 4 2200 2300 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (37/53) Multilayer Baluns, HHM Series HHM1536B1 For 3.7GHz SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.35±0.2 2 3 Unbalanced Port GND Balanced Port Balanced Port GND N.C. Dimensions in mm 0.2 This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 0.3 0.8 Balanced output 100Ω 0.3±0.2 RECOMMENDED PCB PATTERN 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 100Ω 3400 to 4000MHz 10dB min. 180±20deg. 0±2.0dB 1.2dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole Dimensions in mm Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 100Ω RETURN LOSS 0 1: 3400MHz –5 –16.17dB –10 2: 3700MHz –15 –18.90dB 1 –20 3: 4000MHz 2 –25 3 –22.04dB –30 –35 –40 –45 –50 3200 3300 3400 3500 3600 3700 3800 3900 4000 4100 4200 Frequency (MHz) Insertion loss (dB) INSERTION LOSS 0.0 1: 3400MHz –0.5 –0.58dB 3 2 1 –1.0 2: 3700MHz –1.5 –0.49dB –2.0 3: 4000MHz –2.5 –0.51dB –3.0 –3.5 –4.0 –4.5 –5.0 3200 3300 3400 3500 3600 3700 3800 3900 4000 4100 4200 Frequency (MHz) AMPLITUDE BALANCE Amplitude balance (dB) 0.4 5.0 1: 3400MHz 4.0 1.00dB 3.0 2: 3700MHz 2.0 0.93dB 1.0 3: 4000MHz 1 2 3 0.0 0.73dB –1.0 –2.0 –3.0 –4.0 –5.0 3200 3300 3400 3500 3600 3700 3800 3900 4000 4100 4200 Frequency (MHz) PHASE BALANCE 200 Phase balance (deg.) 0.3 195 190 185 180 1 2 3 1: 3400MHz 182.26deg. 2: 3700MHz 184.42deg. 3: 4000MHz 186.53deg. 175 170 165 3200 3300 3400 3500 3600 3700 3800 3900 4000 4100 4200 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (38/53) Multilayer Baluns, HHM Series HHM1537 For W-CDMA/Tx-Rx SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.3 3 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 Unbalanced impedance Balanced impedance 50Ω 150Ω 1920 to 1980, 2110 to 2170MHz 10dB min. 180±10deg. 0±2.0dB 1.0dB max. –40 to +85°C –40 to +85°C 2000pieces/reel Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 0.6 0.9 2 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.8 Balanced output 150Ω 0.3±0.2 0.35±0.2 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 7 0. ø0.3 Through-hole 0.3 Dimensions in mm 0 –5 –10 –15 –20 –25 –30 –35 –40 –45 –50 1700 2 1 1800 1: 1920MHz –19.68dB 2: 1980MHz –19.81dB 3: 2110MHz –19.94dB 4: 2170MHz –19.61dB 4 3 1900 2000 2100 Frequency (MHz) AMPLITUDE BALANCE 2200 2300 Insertion loss (dB) INSERTION LOSS 0.0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 1700 1 1800 5 4 3 2 1 0 –1 –2 –3 –4 –5 1700 2 1 1800 3 1900 2000 2100 Frequency (MHz) 1: 1920MHz 0.17dB 2: 1980MHz 0.11dB 3: 2110MHz –0.03dB 4: 2170MHz –0.15dB 4 2200 2300 PHASE BALANCE 2 3 1900 2000 2100 Frequency (MHz) 4 2200 1: 1920MHz –0.58dB 2: 1980MHz –0.60dB 3: 2110MHz –0.64dB 4: 2170MHz –0.66dB 2300 Phase balance (deg.) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 150Ω RETURN LOSS Amplitude balance (dB) 0.4 200 195 190 185 180 175 170 165 160 1700 1 1800 2 3 1900 2000 2100 Frequency (MHz) 1: 1920MHz 179.4deg. 2: 1980MHz 179.7deg. 3: 2110MHz 180.4deg. 4: 2170MHz 180.6deg. 4 2200 2300 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (39/53) Multilayer Baluns, HHM Series HHM1538 For DCS/Local SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 TERMINAL FUNCTIONS 0.95±0.1 6 4 +0.1 0.25–0.2 1.25±0.15 6 1 2 0.2±0.2 1 0.35±0.2 2 3 1 2 3 4 5 6 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm 0.2 This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 0.3 0.8 Balanced output 100Ω 0.3±0.2 RECOMMENDED PCB PATTERN 0.8 4 Unbalanced input 50Ω 3 0.65±0.2 5 ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port 25°C Insertion loss –40 to +85°C Operating Temperature range Storage Packaging style and quantities 50Ω 100Ω 1280 to 1440MHz 10dB min. 180±10deg. 0±2.0dB 0.9dB max. 1.0dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole Dimensions in mm Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 100Ω RETURN LOSS 0 1: 1280MHz –5 –11.78dB –10 2: 1440MHz –15 1 2 –13.29dB –20 –25 –30 –35 –40 –45 –50 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 Frequency (MHz) Insertion loss (dB) INSERTION LOSS 0 1: 1280MHz –1 2 1 –0.702dB –2 2: 1440MHz –3 –0.632dB –4 –5 –6 –7 –8 –9 –10 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 Frequency (MHz) AMPLITUDE BALANCE Amplitude balance (dB) 0.4 10 1: 1280MHz 8 –0.384dB 6 2: 1440MHz 4 –0.069dB 2 0 2 1 –2 –4 –6 –8 –10 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 Frequency (MHz) PHASE BALANCE Phase balance (deg.) 0.3 205 1: 1280MHz 200 179.7deg. 195 2: 1440MHz 190 179.5deg. 185 180 2 1 175 170 165 160 155 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (40/53) Multilayer Baluns, HHM Series HHM1541 For Bluetooth&IEEE802.11b/g SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.3 3 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 2 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.8 Balanced output 50Ω 0.3±0.2 0.35±0.2 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 75Ω 2400 to 2500MHz 10dB min. 180±10deg. 0±2.0dB 1.2dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole 0.3 Dimensions in mm 0 –5 –10 –15 –20 –25 –30 –35 –40 –45 –50 2100 2200 1: 2400MHz –14.45dB 2: 2500MHz –13.63dB 2 1 AMPLITUDE BALANCE 2300 2400 2500 Frequency (MHz) 2600 2700 Insertion loss (dB) INSERTION LOSS 0 –1 –2 –3 –4 –5 –6 –7 –8 –9 –10 2100 1 2200 5 4 3 2 1 0 –1 –2 –3 –4 –5 2100 1: 2400MHz 0.66dB 2: 2500MHz 0.66dB 1 2200 2 2300 2400 2500 Frequency (MHz) 2600 2700 PHASE BALANCE 1: 2400MHz –0.66dB 2: 2500MHz –0.74dB 2 2300 2400 2500 Frequency (MHz) 2600 2700 Phase balance (deg.) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 75Ω RETURN LOSS Amplitude balance (dB) 0.4 205 200 195 190 185 180 175 170 165 160 155 2100 1: 2400MHz 178.6deg. 2: 2500MHz 177.3deg. 1 2200 2 2300 2400 2500 Frequency (MHz) 2600 2700 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (41/53) Multilayer Baluns, HHM Series HHM1541E1 For Bluetooth SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.3 3 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 2 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.8 Balanced output 75Ω 0.3±0.2 0.35±0.2 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 75Ω 2300 to 2500MHz 10dB min. 180±10deg. 0±1.5dB 1.0dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole 0.3 Dimensions in mm 0 –5 –10 –15 –20 –25 –30 –35 –40 1500 1750 AMPLITUDE BALANCE 1: 2400.0MHz –19.36dB 2: 2450.0MHz –21.00dB 3: 2500MHz –22.86dB 2000 2250 2500 Frequency (MHz) 2750 3000 Insertion loss (dB) INSERTION LOSS 0.0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 1500 1750 5 4 3 2 1 0 –1 –2 –3 –4 –5 1500 1750 1: 2400.0MHz –0.06dB 2: 2450.0MHz –0.06dB 3: 2500.0MHz –0.04dB 2000 2250 2500 Frequency (MHz) 2750 3000 PHASE BALANCE 200 1: 2400.0MHz –0.45dB 2: 2450.0MHz –0.47dB 3: 2500.0MHz –0.43dB 2000 2250 2500 Frequency (MHz) 2750 3000 Phase balance (deg) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 75Ω RETURN LOSS Amplitude balance (dB) 0.4 1: 2400.0MHz 176.24degrees 2: 2450.0MHz 176.89degrees 3: 2500.0MHz 177.24degrees 190 180 170 160 1500 1750 2000 2250 2500 Frequency (MHz) 2750 3000 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (42/53) Multilayer Baluns, HHM Series HHM1541E2 For Bluetooth&IEEE802.11b/g SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.3 3 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 2 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.8 Balanced output 75Ω 0.3±0.2 0.35±0.2 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 75Ω 2300 to 2500MHz 10dB min. 180±10deg. 0±1.5dB 1.0dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole 0.3 Dimensions in mm 0 –5 –10 –15 –20 –25 –30 –35 –40 1500 1750 AMPLITUDE BALANCE 1: 2300.0MHz –16.71dB 2: 2400.0MHz –19.36dB 3: 2500MHz –22.86dB 2000 2250 2500 Frequency (MHz) 2750 3000 Insertion loss (dB) INSERTION LOSS 0.0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 1500 1750 5 4 3 2 1 0 –1 –2 –3 –4 –5 1500 1750 1: 2300.0MHz –0.14dB 2: 2400.0MHz –0.06dB 3: 2500.0MHz –0.04dB 2000 2250 2500 Frequency (MHz) 2750 3000 PHASE BALANCE 200 1: 2300.0MHz –0.50dB 2: 2400.0MHz –0.45dB 3: 2500.0MHz –0.43dB 2000 2250 2500 Frequency (MHz) 2750 3000 Phase balance (deg) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 75Ω RETURN LOSS Amplitude balance (dB) 0.4 1: 2300.0MHz 175.68degrees 2: 2400.0MHz 176.24degrees 3: 2500.0MHz 177.24degrees 190 180 170 160 1500 1750 2000 2250 2500 Frequency (MHz) 2750 3000 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (43/53) Multilayer Baluns, HHM Series HHM1544 For W-LAN SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.3 3 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 2 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.8 Balanced output 100Ω 0.3±0.2 0.35±0.2 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 100Ω 5150 to 5350MHz 10dB min. 180±20deg. 0±1.5dB 1.2dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole 0.3 Dimensions in mm 0 –5 –10 –15 –20 –25 –30 –35 –40 –45 –50 5000 1 5100 2 1:5150MHz –14.71dB 2: 5250MHz –14.37dB 3: 5350MHz –14.08dB 3 5200 5300 Frequency (MHz) AMPLITUDE BALANCE 5400 5500 INSERTION LOSS Insertion loss (dB) 0 1 –1 2 1: 5150MHz –0.40dB 2: 5250MHz –0.39dB 3: 5350MHz –0.40dB 3 –2 –3 –4 –5 5000 5100 5 4 3 2 1 0 –1 –2 –3 –4 –5 5000 1 5100 2 1: 5150MHz 0.24dB 2: 5250MHz –0.25dB 3: 5350MHz –0.76dB 3 5200 5300 Frequency (MHz) 5400 5500 PHASE BALANCE 5200 5300 Frequency (MHz) 5400 5500 Phase balance (deg.) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 100Ω RETURN LOSS Amplitude balance (dB) 0.4 205 200 195 190 185 180 175 170 165 160 155 5000 1 5100 2 5200 5300 Frequency (MHz) 1: 5150MHz 185.5deg. 2: 5250MHz 186.2deg. 3: 5350MHz 186.8deg. 3 5400 5500 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (44/53) Multilayer Baluns, HHM Series HHM1545 For 3.7GHz SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 TERMINAL FUNCTIONS 0.95±0.1 6 4 +0.1 0.25–0.2 1.25±0.15 6 1 2 0.2±0.2 1 0.35±0.2 2 3 Unbalanced Port GND Balanced Port Balanced Port GND N.C. Dimensions in mm 0.2 This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 0.3 0.8 Balanced output 50Ω 0.3±0.2 RECOMMENDED PCB PATTERN 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 50Ω 3400 to 4010MHz 10dB min. 180±10deg. 0±1.0dB 1.2dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole Dimensions in mm Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 50Ω RETURN LOSS 0 1: 3400MHz –5 –13.34dB –10 2: 3700MHz –15 1 –19.54dB –20 3: 4010MHz 2 –25 –23.38dB 3 –30 –35 –40 –45 –50 3200 3300 3400 3500 3600 3700 3800 3900 4000 4100 4200 Frequency (MHz) Insertion loss (dB) INSERTION LOSS 0.0 1: 3400MHz –0.5 3 –0.71dB 2 –1.0 1 2: 3700MHz –1.5 –0.51dB –2.0 3: 4010MHz –2.5 –0.49dB –3.0 –3.5 –4.0 –4.5 –5.0 3200 3300 3400 3500 3600 3700 3800 3900 4000 4100 4200 Frequency (MHz) AMPLITUDE BALANCE Amplitude balance (dB) 0.4 5.0 1: 3400MHz 4.0 0.80dB 3.0 2: 3700MHz 2.0 0.72dB 1.0 3: 4010MHz 1 2 0.0 3 –0.52dB –1.0 –2.0 –3.0 –4.0 –5.0 3200 3300 3400 3500 3600 3700 3800 3900 4000 4100 4200 Frequency (MHz) PHASE BALANCE 200 Phase balance (deg.) 0.3 195 190 185 180 1 2 3 1: 3400MHz 182.36deg. 2: 3700MHz 184.22deg. 3: 4010MHz 186.64deg. 175 170 165 3200 3300 3400 3500 3600 3700 3800 3900 4000 4100 4200 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (45/53) Multilayer Baluns, HHM Series HHM1547 For 3.7GHz SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 TERMINAL FUNCTIONS 0.95±0.1 6 4 +0.1 0.25–0.2 1.25±0.15 6 1 2 0.2±0.2 1 0.35±0.2 2 3 Unbalanced Port GND Balanced Port Balanced Port GND N.C. Dimensions in mm 0.2 This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 0.3 0.8 Balanced output 150Ω 0.3±0.2 RECOMMENDED PCB PATTERN 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 150Ω 3400 to 4000MHz 10dB min. 180±20deg. 0±2.0dB 1.2dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole Dimensions in mm Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 150Ω RETURN LOSS 0 1: 3400MHz –5 –13.02dB –10 2: 3700MHz –15 1 –13.71dB 2 3 –20 3: 4000MHz –25 –15.91dB –30 –35 –40 –45 –50 3200 3300 3400 3500 3600 3700 3800 3900 4000 4100 4200 Frequency (MHz) Insertion loss (dB) INSERTION LOSS 0.0 1: 3400MHz –0.5 –0.72dB 3 2 –1.0 1 2: 3700MHz –1.5 –0.62dB –2.0 3: 4010MHz –2.5 –0.59dB –3.0 –3.5 –4.0 –4.5 –5.0 3200 3300 3400 3500 3600 3700 3800 3900 4000 4100 4200 Frequency (MHz) AMPLITUDE BALANCE Amplitude balance (dB) 0.4 5.0 1: 3400MHz 4.0 0.44dB 3.0 2: 3700MHz 2.0 0.21dB 1.0 3: 4000MHz 0.0 1 –0.08dB 2 3 –1.0 –2.0 –3.0 –4.0 –5.0 3200 3300 3400 3500 3600 3700 3800 3900 4000 4100 4200 Frequency (MHz) PHASE BALANCE 200 Phase balance (deg.) 0.3 1: 3400MHz 171.83deg. 2: 3700MHz 175.01deg. 3: 4010MHz 178.27deg. 195 190 185 180 175 170 3 2 1 165 3200 3300 3400 3500 3600 3700 3800 3900 4000 4100 4200 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (46/53) Multilayer Baluns, HHM Series HHM1548A2 For 3.7GHz SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.3 3 0.2 6 5 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 4 1 2 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss 50Ω 200Ω 3100 to 3400MHz 6dB min. Phase impedance at balanced port 177±20deg. Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 0.6 0.9 2 Unbalanced Port GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.8 Balanced output 200Ω 0.3±0.2 0.35±0.2 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 3 50Ω 200Ω 3400 to 4000MHz 9dB min. 178±20deg. at 3400MHz 180±20deg. at 3700MHz 185±20deg. at 4000MHz 1±2.0dB 1±2.0dB 1.5db max. –40 to +85°C –40 to +85°C 1.2dB max. 2000pieces/reel 7 0. ø0.3 Through-hole 0.3 Dimensions in mm FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 200Ω RETURN LOSS 1: 3100MHz –9.33dB 2: 3400MHz –15.69dB 3: 3700MHz –20.23dB 4: 4000MHz –18.49dB –5 –10 1 –15 2 –20 3 4 –25 –30 2500 3000 3500 4000 Frequency (MHz) 4500 5000 Insertion loss (dB) INSERTION LOSS 0.0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 2500 5 4 3 2 1 0 –1 –2 –3 –4 –5 2500 1 3000 2 3 1: 3100MHz 1.33dB 2: 3400MHz 1.45dB 3: 3700MHz 1.43dB 4: 4000MHz 1.37dB 4 3500 4000 Frequency (MHz) 4500 210 2 3 1: 3100MHz –1.22dB 2: 3400MHz –0.64dB 3: 3700MHz –0.48dB 4: 4000MHz –0.58dB 4 1 3000 5000 PHASE BALANCE 3500 4000 Frequency (MHz) 4500 5000 Phase balance (deg.) Return loss (dB) 0 AMPLITUDE BALANCE Amplitude balance (dB) 0.4 1: 3100MHz 177.46deg. 2: 3400MHz 178.37deg. 3: 3700MHz 180.95deg. 4: 4000MHz 183.95deg. 200 190 180 170 1 2 3 4 160 150 2500 3000 3500 4000 Frequency (MHz) 4500 5000 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (47/53) Multilayer Baluns, HHM Series HHM1548C2 For 3.7GHz SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 TERMINAL FUNCTIONS 0.95±0.1 6 4 +0.1 0.25–0.2 1.25±0.15 6 1 2 0.2±0.2 1 0.3 3 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 2 Unbalanced Port GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN 0.8 Balanced output 200Ω 0.3±0.2 0.35±0.2 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 200Ω 3400 to 4000MHz 10dB min. 180±20deg. 0±2.0dB 1.0dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole 0.3 Dimensions in mm 0 –5 –10 –15 –20 –25 –30 –35 –40 2000 1 AMPLITUDE BALANCE 1: 3400MHz –21.13dB 2: 3700MHz –23.86dB 3: 4000MHz –28.98dB 2 3 2500 3000 3500 4000 Frequency (MHz) 4500 5000 Insertion loss (dB) INSERTION LOSS 0.0 –0.5 –1.0 –1.5 –2.0 –2.5 –3.0 –3.5 –4.0 –4.5 –5.0 2000 5 4 3 2 1 0 –1 –2 –3 –4 –5 2000 1 2500 2 1: 3400MHz 0.08dB 2: 3700MHz –0.03dB 3: 4000MHz –0.19dB 3 3000 3500 4000 Frequency (MHz) 4500 5000 PHASE BALANCE 200 1 2500 2 1: 3400MHz –0.54dB 2: 3700MHz –0.51dB 3: 4000MHz –0.60dB 3 3000 3500 4000 Frequency (MHz) 4500 5000 Phase balance (deg.) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 200Ω RETURN LOSS Amplitude balance (dB) 0.4 1: 3400MHz 178.77deg. 2: 3700MHz 183.36deg. 3: 4000MHz 186.80deg. 190 3 2 180 1 170 160 2000 2500 3000 3500 4000 Frequency (MHz) 4500 5000 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (48/53) Multilayer Baluns, HHM Series HHM1548E1 For 3.7GHz SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 TERMINAL FUNCTIONS 0.95±0.1 6 4 +0.1 0.25–0.2 1.25±0.15 6 1 2 0.2±0.2 1 0.35±0.2 2 3 1 2 3 4 5 6 Unbalanced Port GND Balanced Port Balanced Port GND N.C. Dimensions in mm 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 0.3 0.8 Balanced output 200Ω 0.3±0.2 RECOMMENDED PCB PATTERN 0.8 4 Unbalanced input 50Ω 3 0.65±0.2 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 200Ω 3200 to 3925MHz 10dB min. 180±10deg. 0±1.0dB 1.2dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole 0.4 Dimensions in mm FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 200Ω RETURN LOSS Return loss (dB) 0 –5 –10 –15 AMPLITUDE BALANCE 3 1: 3200.0MHz –14.05dB 2: 3562.5MHz –22.40dB 3: 3925.0MHz –13.49dB –20 –25 Amplitude balance (dB) 0.3 –0.5 –1.0 –1.5 0 –1 –2 PHASE BALANCE 200 1: 3200.0MHz –0.71dB 2: 3562.5MHz –0.39dB 3: 3925.0MHz –0.53dB –2.0 –2.5 –3.0 2500 2750 3000 3250 3500 3750 4000 4250 4500 Frequency (MHz) Phase balance (deg) Insertion loss (dB) 0 0.0 1 1: 3200.0MHz 0.11dB 2: 3562.5MHz –0.36dB 3: 3925.0MHz –0.46dB –3 2500 2750 3000 3250 3500 3750 4000 4250 4500 Frequency (MHz) –30 2500 2750 3000 3250 3500 3750 4000 4250 4500 Frequency (MHz) INSERTION LOSS 2 190 180 1: 3200.0MHz 183.83degrees 2: 3562.5MHz 183.93degrees 3: 3925.0MHz 182.50degrees 170 160 2500 2750 3000 3250 3500 3750 4000 4250 4500 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (49/53) Multilayer Baluns, HHM Series HHM1562B For W-LAN SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 Balanced output 100Ω 1 2 3 0.3±0.2 0.35±0.2 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN ELECTRICAL CHARACTERISTICS 15 0. 95 0. 0.25 0.25 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 100Ω 5150 to 5875MHz 10dB min. 180±10deg. 0±2.0dB 1.0 max. –40 to +85°C –40 to +85°C 2000pieces/reel 0.5 0.2 1.10 0.8 0.3 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 0.3 Unbal Port Bal Port ø0.3 Through-hole Line width be designed to match 50Ω characteristic impedance depending on PCB material and thickness. Dimensions in mm FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 100Ω RETURN LOSS Return loss (dB) –10 –15 –20 1 2 4 3 –25 1: 5150MHz –17.131dB 2: 5500MHz –18.741dB 3: 5725MHz –18.20dB 4: 5875MHz –17.67dB –30 –35 5000 5200 5400 5600 Frequency (MHz) 5800 Amplitude balance (dB) 0 –5 AMPLITUDE BALANCE 6000 INSERTION LOSS 2 3 4 –2 –3 1: 5150MHz –0.429dB 2: 5500MHz –0.387dB 3: 5725MHz –0.37dB 4: 5875MHz –0.44dB –4 –5 5000 5200 5400 5600 Frequency (MHz) 5800 6000 Phase balance (deg.) Insertion loss (dB) –1 1 5200 2 3 5400 5600 Frequency (MHz) 4 5800 1: 5150MHz 0.315dB 2: 5500MHz –0.197dB 3: 5725MHz –0.55dB 4: 5875MHz –0.95dB 6000 PHASE BALANCE 0 1 5 4 3 2 1 0 –1 –2 –3 –4 –5 5000 205 200 195 190 185 180 175 170 165 160 155 5000 1 5200 2 5400 5600 Frequency (MHz) 4 3 5800 1: 5150MHz 179.372deg. 2: 5500MHz 180.283deg. 3: 5725MHz 181.41deg. 4: 5875MHz 182.94deg. 6000 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (50/53) Multilayer Baluns, HHM Series HHM1564A4 For AGSM/Tx-Rx SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.35±0.2 2 3 1 2 3 4 5 6 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm 0.2 This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 0.3 0.8 Balanced output 200Ω 0.3±0.2 RECOMMENDED PCB PATTERN 0.8 4 Unbalanced input 50Ω 3 0.65±0.2 5 ELECTRICAL CHARACTERISTICS Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 200Ω 824 to 894MHz 10dB min. 180±10deg. 0±1.0dB 1.0dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole Dimensions in mm Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 200Ω RETURN LOSS 0 1: 824MHz –5 –22.6dB –10 2: 859MHz –15 –26.46dB –20 3: 894MHz 3 –25 1 –20.48dB 2 –30 –35 –40 –45 –50 750 770 790 810 830 850 870 890 910 930 950 Frequency (MHz) Insertion loss (dB) INSERTION LOSS 0.0 1: 824MHz –0.5 –0.66dB 3 2 1 –1.0 2: 859MHz –1.5 –0.62dB –2.0 3: 894MHz –2.5 –0.63dB –3.0 –3.5 –4.0 –4.5 –5.0 750 770 790 810 830 850 870 890 910 930 950 Frequency (MHz) AMPLITUDE BALANCE Amplitude balance (dB) 0.4 5 1: 824MHz 4 0.31dB 3 2: 859MHz 2 0.32dB 1 3: 894MHz 0 3 2 0.338dB 1 –1 –2 –3 –4 –5 750 770 790 810 830 850 870 890 910 930 950 Frequency (MHz) PHASE BALANCE Phase balance (deg.) 0.3 200 1: 824MHz 195 178.2deg. 190 2: 859MHz 178.0deg. 185 3: 894MHz 180 177.8deg. 1 2 3 175 170 165 160 750 770 790 810 830 850 870 890 910 930 950 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (51/53) Multilayer Baluns, HHM Series HHM1570B1 For W-LAN SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 TERMINAL FUNCTIONS 0.95±0.1 6 4 +0.1 0.25–0.2 1.25±0.15 6 1 2 0.2±0.2 Balanced output 100Ω 1 2 3 0.3±0.2 0.35±0.2 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN ELECTRICAL CHARACTERISTICS 15 0. 95 0. 0.25 0.25 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 100Ω 4900 to 5950MHz 10dB min. 180±10deg. 0±2.0dB 1.0 max. –40 to +85°C –40 to +85°C 2000pieces/reel 0.5 0.2 1.10 0.8 0.3 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 0.3 Unbal Port Bal Port ø0.3 Through-hole Line width be designed to match 50Ω characteristic impedance depending on PCB material and thickness. Dimensions in mm AMPLITUDE BALANCE INSERTION LOSS Insertion loss (dB) –1.0 2 1 0 –1 1 2 3 1: 4900MHz 0.14dB 2: 5425MHz –0.02dB 3: 5950MHz –0.19dB –2 –3 4000 4250 4500 4750 5000 5250 5500 5750 6000 Frequency (MHz) PHASE BALANCE 0.0 –0.5 3 Amplitude balance (dB) 0 1: 4900MHz –5 –34.55dB –10 2: 5425MHz –15 –28.50dB 3: 5950MHz –20 –24.48dB –25 3 –30 2 –35 1 –40 –45 4000 4250 4500 4750 5000 5250 5500 5750 6000 Frequency (MHz) 1 2 1: 4900MHz –0.35dB 3 2: 5425MHz –0.19dB 3: 5950MHz –0.30dB –1.5 –2.0 4000 4250 4500 4750 5000 5250 5500 5750 6000 Frequency (MHz) Phase balance (deg.) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 100Ω RETURN LOSS 200 1: 4900MHz 195 179.84deg. 190 2: 5425MHz 181.03deg. 185 3 3: 5950MHz 180 183.81deg. 2 1 175 170 165 160 4000 4250 4500 4750 5000 5250 5500 5750 6000 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (52/53) Multilayer Baluns, HHM Series HHM1582A1 For 2218 to 2458MHz SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 1 0.35±0.2 2 3 Dimensions in mm 0.2 ELECTRICAL CHARACTERISTICS This width is 50Ω. Micro-strip line for 0.4mm thick glass-epoxy substrate. 6 5 4 1 2 3 0.6 0.9 0.3 0.8 Balanced output 200Ω Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. 0.3±0.2 RECOMMENDED PCB PATTERN 0.8 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 200Ω 2218 to 2458MHz 10dB min. 180±10deg. 0±2.0dB 0.9dB max. –40 to +85°C –40 to +85°C 2000pieces/reel 7 0. ø0.3 Through-hole 0.3 Dimensions in mm FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 200Ω RETURN LOSS Return loss (dB) 0 –5 –10 –15 –20 3 1 AMPLITUDE BALANCE 1: 2218.0MHz –16.97dB 2: 2338.0MHz –20.48dB 3: 2458.0MHz –15.61dB 2 –30 Amplitude balance (dB) 0.4 –25 2000 2100 2200 2300 2400 2500 2600 2700 Frequency (MHz) 0 1: 2218.0MHz –0.5 2 –0.60dB 1 3 –1.0 2: 2338.0MHz –1.5 –0.51dB –2.0 3: 2458.0MHz –2.5 –0.61dB –3.0 –3.5 –4.0 –4.5 –5.0 2000 2100 2200 2300 2400 2500 2600 2700 Frequency (MHz) PHASE BALANCE 210 Phase balance (deg.) Insertion loss (dB) INSERTION LOSS 5 1: 2218.0MHz 4 0.19dB 3 2: 2338.0MHz 2 0.37dB 1 3: 2458.0MHz 0 3 0.51dB 2 1 –1 –2 –3 –4 –5 2000 2100 2200 2300 2400 2500 2600 2700 Frequency (MHz) 200 190 180 1 2 3 1: 2218.0MHz 179.06deg. 2: 2338.0MHz 180.68deg. 3: 2458.0MHz 183.02deg. 170 160 150 2000 2100 2200 2300 2400 2500 2600 2700 Frequency (MHz) • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm (53/53) Multilayer Baluns, HHM Series HHM1583B1 For UWB SHAPES AND DIMENSIONS/CIRCUIT 2.0±0.15 5 6 4 +0.1 0.25–0.2 1.25±0.15 6 TERMINAL FUNCTIONS 0.95±0.1 1 2 0.2±0.2 Balanced output 100Ω 1 2 3 0.3±0.2 0.35±0.2 Unbalanced Port GND or DC feed+ RF GND Balanced Port Balanced Port GND N.C. Dimensions in mm RECOMMENDED PCB PATTERN ELECTRICAL CHARACTERISTICS 15 0. 95 0. 0.25 0.25 Unbalanced impedance Balanced impedance Frequency range Unbalanced port return loss Phase impedance at balanced port Amplitude impedance at balanced port Insertion loss Operating Temperature range Storage Packaging style and quantities 50Ω 100Ω 3100 to 4900MHz 10.0dB min. 180±10deg. 0±1.5dB 1.0 max. –40 to +85°C –40 to +85°C 2000pieces/reel 0.5 0.2 1.10 0.8 0.3 1 2 3 4 5 6 4 Unbalanced input 50Ω 3 0.65±0.2 5 0.3 Unbal Port Bal Port ø0.3 Through-hole Line width be designed to match 50Ω characteristic impedance depending on PCB material and thickness. Dimensions in mm 0 –5 –10 –15 –20 –25 –30 –35 –40 –45 2500 AMPLITUDE BALANCE 3 1 3 1: 3100MHz –17.06dB 2: 4000MHz –35.20dB 3: 4900MHz –20.65dB 2 3000 3500 4000 4500 Frequency (MHz) 5000 Amplitude balance (dB) Return loss (dB) FREQUENCY CHARACTERISTICS Unbalance 50Ω/Balance 100Ω RETURN LOSS INSERTION LOSS 1 2 3 –1.5 1: 3100MHz –0.44dB 2: 4000MHz –0.35dB 3: 4900MHz –0.53dB –2.0 –2.5 3000 3500 4000 4500 Frequency (MHz) 5000 5500 Phase balance (deg.) Insertion loss (dB) 1 2 3 –2 3000 3500 4000 4500 Frequency (MHz) 5000 5500 200 –1.0 –3.0 2500 0 –1 PHASE BALANCE 0.0 –0.5 1 –3 2500 5500 1: 3100MHz –0.10dB 2: 4000MHz –0.27dB 3: 4900MHz –0.68dB 2 1: 3100MHz 176.69deg. 2: 4000MHz 175.64deg. 3: 4900MHz 182.12deg. 190 3 180 1 2 170 160 2500 3000 3500 4000 4500 Frequency (MHz) 5000 5500 • All specifications are subject to change without notice. 001-01/ 20070830 /e8balun_hhm.fm