Transcript
Division Interior
®
MultiViu Flex 4 Data Sheet
Description CAN-capable multifunction Solution Features: › Robust and versatile design › CAN-capability (SAE J1939, CANopen) › Video interface › Analogue and digital input › Protection class IP65 and IP67 Variants Entry T
Basic
FullT
Entry K
BasicK
FullTK
Internal memory
Flash: 1 GByte RAM: 256 MByte
Flash: 512 MByte RAM: 128 MByte
Flash: 1 GByte RAM: 256 MByte
Flash: 512 MByte RAM: 128 MByte
Flash: 512 MByte RAM: 128 MByte
Flash: 1 GByte RAM: 256 MByte
Video input
–
–
1 x analog video
–
–
1 x analog video
Ethernet
–
–
1 x 10/100 Mbit/s
–
–
1 x 10/100 Mbit/s
Touch screen
yes
–
yes
–
–
yes
A/D inputs
–
4
4
–
4
4
Digital outputs
–
3
3
–
3
3
USB 2.0 Full speed
–
1 x on main connector
2 on Front and Rear connector
–
1 x on main connector
2 on Front and Rear connector
–
8 x Softkeys 3 x Hardkeys 1 x Rotating encoder
8 x Softkeys 3 x Hardkeys 1 x Rotating encoder
8 x Softkeys 3 x Hardkeys 1 x Rotating encoder
Keyboard
TU00-0759-5904602
–
–
Technische Änderungen vorbehalten
1014
Technical details subject to change
1-7
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All right reserved in the event of the grant of a patent, utility model or design.
Data Sheet MultiViu®Flex 4 ®
1. Order Numbers
MultiViu Flex 4
A2C59506619
MultiViu Flex 4 Basic
A2C59506620
MultiViu Flex 4 Full T
A2C59506622
MultiViu Flex 4 Basic K
A2C59506623
MultiViu Flex 4 Full TK
A2C59506637
App Builder Full License
A2C59506628
Dashboard mounting kit for MultiViu®Flex 4 Basic and Full T
A2C59506629
Dashboard mounting kit MultiViu®Flex 4 Basic K and Full TK
A2C59506632
Adapter cover for MultiViu®Flex 4 all version
A2C59506634
26 pins Tyco Connector
A2C59506635
Power cable MultiViu®Flex 4 and 7 1,5m
2. Mechanical
® ® ® ®
®
2.1 Dimensions MultiViu Flex 4 Basic and Full T
TU00-0759-5904602
Technische Änderungen vorbehalten
1014
Technical details subject to change
2-7
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All right reserved in the event of the grant of a patent, utility model or design.
Data Sheet MultiViu®Flex 4 2.2 Dimensions Multiviu 4 Basic K and Full TK
TU00-0759-5904602
Technische Änderungen vorbehalten
1014
Technical details subject to change
3-7
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All right reserved in the event of the grant of a patent, utility model or design.
Data Sheet MultiViu®Flex 4 2.3 Housing
Plastic housing, coloured light grey with black rubber frame
2.4 Label
› landscape › standalone › in-dash
2.5 Mounting
Mounting accessories › In-Dash mounting frame › Standalone mounting adaptor for RAM® mounting system
3. Display Type
TFT Color Graphic LCD with LED backlight
Size
4.3”, 95 mm (W) x 53 mm (H)
Resolution
480 x 272 px, WQVGA, 15:9
Colours
16.7 Mio.
Brightness
typ. 400 cd/m²
Contrast Ratio
typ. 400:1
4. Input Devices On Multiviu Flex 4 Entry T, Full T and Full TK 4.1 Touch screen
- analogue resistive (durability 1 million actuations with 6 Nm force)
On Multiviu Flex 4 Entry K, Basic K and Full TK 4.2 Left Keypad 4.3 Right Keypad 4.4 Indicators and Sensors 4.5 Encoder
4 keys with tactile feedback › orange LED backlight › Lifetime 1.000.000 actuations 4+3 keys with tactile feedback › orange LED backlight › Lifetime 1.000.000 actuations Light sensor (not all Versions) 1 Multicolour-LED 3 Status-LED’s optical encoder with 16 mechanical detents and push function lifetime: 1 million cycles
5. Electronics 5.1 Processor platform CPU
Freescale I.MX35®, 532 MHz
Mass storage
1 GByte (approx. 900 MB for customer use)
RAM
128 Mbyte (Basic, Basic K) or 256 Mbyte (Full T, Full TK)
RTC
buffered by gold cap › 65 dB(A) in 30 cm distance › lifetime min. 1000h
5.2 Buzzer 5.3 Interfaces 5.3.1 Power supply Operating voltage range
9 … 36 V DC
Protection
short circuit protection
Overvoltage resistance
48V for max. 2 minutes
Inverse polarity protection
up to -48 V DC for max. 5 minutes
Current consumption (without external load), max TU00-0759-5904602
Power Mode On Low-power Sleep Off
Technische Änderungen vorbehalten
current at 13,5 V DC 430 mA 160 mA 90 mA 0 mA 1014
current at 27 V 240 mA 55 mA 55 mA 0 mA
Technical details subject to change
4-7
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All right reserved in the event of the grant of a patent, utility model or design.
Data Sheet MultiViu®Flex 4
5.3.2 CAN Interfaces
2 x CAN-Interfaces › ISO 11898, CAN-specification 2.0 B active, › up to 1 Mbit/s (default 250 Kbit/s, 500 Kbit/s, 750 Kbit/s and 1 Mbit/s)
5.3.3 RS232
1 x RS232-Interface
Type
EIA232 (only RxD, TxD, GND)
Speed
max. 115 Kbps
5.3.4 USB
Host 2.0
Main connector
1 x Full speed
On front (only Full TK)
1 x USB slot High speed
5.3.5 Inputs (only Basic and Full)
4 configurable analogue/digital inputs
input impedance
> 3kOhm
resolution
10 bit resolution (1028 digits, 1 digit = 11,7 mV)
Voltage range
0 … 12 V
max. protectable input voltage
36 V DC
protection
short circuit protection
frequency 5.3.6 Outputs (only Basic and Full) short circuit protection
max. signal frequency 50 Hz
up to 36 V DC
Imax
300 mA open drain
RDS,on
< 1 Ohm
RDS,off
> 100 kOhm 1 analog video inputs, 1 Vss camera control output (open drain) for special functionality (mirror, shutter, heating etc.) ampacity 300mA @ 12V DC 1 x 10/100 Mbit/s Base T for Full
5.3.7 Video-Interface (only Full) 5.3.8 Ethernet-Interface
3 digital outputs
6. Connections Main connector
Tyco-AMP 1437288-6 › Mating connector (customer) Tyco-AMP 3-1437290-7 › Mating crimp contact (customer) Tyco AMP 3-1447221-4
Video connector
M12 round connector, female, 5-pole, B-coded acc. to EN 61076-2-101
Ethernet connector
M12 round connector, female, 4-pole, D-coded acc. to EN 61076-2-101
Connector pin out
see chap. 9.
7. Software 7.1 Operating System
Linux, kernel 2.6.28
7.2 Application Programming
MultiViu Flex AppBuilder
8. Testing and Verification
8.1 CE-Compliance
EU Directive 2004/108/EC (EMC) according to EN 12895: Industrial Trucks – Electromagnetic compatibility EN 13309: Construction machinery – Electromagnetic compatibility of machines with internal electrical power supply EN ISO 14982: Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria
8.2 e1s - Type approval
EU Directive 72/245/EWG (Jan-2013)
8.3 Protection Level (IP Code)
IP 6k5 and 6k7 according to ISO 20653: Road Vehicles – Degrees of protection (IP-Code) – Protection of electrical equipment against foreign objects, water and access
8.4 Electrical Requirements
12 and 24V-Systems according to: › ISO 16750-2: Road Vehicles – Environmental conditions and testing for electrical and electronic equipment – Electrical loads › ISO 15003: Agricultural Engineering – Electrical and electronic equipment – Testing resistance to environmental conditions
TU00-0759-5904602
Technische Änderungen vorbehalten
1014
Technical details subject to change
5-7
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All right reserved in the event of the grant of a patent, utility model or design.
Data Sheet MultiViu®Flex 4
8.5 Mechanical Requirements
According to ISO 16750-3: Road Vehicles – Environmental conditions and testing for electrical and electronic equipment – Mechanical loads, Code L ISO 15003: Agricultural Engineering – Electrical and electronic equipment – Testing resistance to environmental conditions › Mechanical Shock: Level 2 › Random Vibration: Level 2 › Sinusoidal Vibration: Level 2
8.6 Climate Requirements
According to ISO 16750-4: Road Vehicles – Environmental conditions and testing for electrical and electronic equipment – Climatic Loads › Operating Temperature Range: -30 … +65°C › Storage Temperature Range: -40 … +85°C ISO 15003: Agricultural Engineering – Electrical and electronic equipment – Testing resistance to environmental conditions
9. Pin out 9.1 Main connector pin out
Pin no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
assignment VCC Ignition Input GND Car GND n. c. n. c. n. c. CAN1H CAN1L CAN2H CAN2L USB_VCC USB_GND USB_DUSB_D+ RS232 RxD RS232 TxD RS232 GND A/DI3 A/DI1 A/DI2 A/DI4 SERV_EN DO3 DO1 DO2
description supply voltage +; terminal 30 ignition input; terminal 15 supply voltage - ;terminal 31 Car GND Not connected Not connected Not connected CAN 1 high CAN 1 low CAN 2 high CAN 2 low USB +5V supply USB supply GND USB Data USB Data + RS232 receive data RS232 transmit data RS232 GND Analog/digital input 3 Analog/digital input 1 Analog/digital input 2 Analog/digital input 4 service enable Digital output 3 Digital output 1 Digital output 2
view on rear side
TU00-0759-5904602
Technische Änderungen vorbehalten
1014
Technical details subject to change
6-7
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All right reserved in the event of the grant of a patent, utility model or design.
Data Sheet MultiViu®Flex 4
9.2 Video connector pin out
Pin no. 1
Round Connector, 5 pins, M12 VidSig+
2
Mirror
3
Camera+
4
Camera -
5
VidSig GND
Video- Connector, M12, female, 5 pins, b-coded, view on rear side
9.3 Ethernet connector pin out
1
Round Connector, 4 pins, M12, acc. To IEC 61076-2-101 TD+
2
RD+
Pin no.
3
TD-
4
RD-
Ethernet Connector, M12, female, 4 pins, d-coded, view on rear side of the A6
TU00-0759-5904602
Technische Änderungen vorbehalten
1014
Technical details subject to change
7-7
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All right reserved in the event of the grant of a patent, utility model or design.
