Preview only show first 10 pages with watermark. For full document please download

Mychild Moses Basket Stand

   EMBED


Share

Transcript

ROCKING MOSES BASKET STAND Important Information: Before you begin assembly, please read these directions. See next page for important warning statements on this product. After product is assembled make sure all bolts and screws are securely tightened. PRN: AIM-50-0171-KOL [15.11.05] WARNING ! IMPORTANT — Read the instructions carefully before use and keep them for ! ! ! ! ! ! ! ! ! ! future reference. WARNING: Use only on a firm ground which is horizontal, level and dry. WARNING: Do not let other children play unattended near the carry cot and stand. WARNING: Do not use if any part is broken, torn or missing. Only use My Child approved parts. When the stand is not in use, it must be put away. This stand is designed to hold a Moses Basket with a base between 68-79cm long and 30-37cm wide. If you use POWER TOOLS to assemble this product, use on the LOWEST SETTING to avoid over tightening and splitting the wood. To prevent entrapment, do not place the Moses Basket and Stand near to other objects. After product is assembled make sure all screws are securely tightened. Regularly check that fixings are secure. Natural wood product: Clean with damp cloth. DO NOT use bleach, solvents or abrasives. 2 PART LIST BS EN 1466:2004 Colour: Date: Shipment Ref. #: 02-20002 [15.11.04] Model #: This stand is designed to hold a Moses Basket with a base between ROCKING MOSES BASKET STAND 68-79cm long and 30-37cm wide (3) Side Rail (One with Warning Label attached) Part #: 07-35124 (2 pcs) (4) Curved Base Rail Part #: 07-35170 (2 pcs) (5) Dowel Cross Rail Part #: 07-35121 (4 pcs) (1) Leg (2) Leg Part #: 07-35277 Part #: 07-35266 (2 pcs) (2 pcs) (6) Plastic Rail Part #: 07-35100 (2 Pcs) HARDWARE S e t # / : 0 8 0 7 0 0 2 S V Fixtures and Fittings supplied (actual size) Ref. Name QTYE A 55mm Allen Head Screw #07-07000-SV 20 B 30mm Wood Pin #07-35001 4 C 17mm Screw #07-01300 8 mm 10 20 " 30 1" 40 1 " 50 60 2" 2 70 " 80 Head 3" Fixtures and Fittings supplied (not to scale) D Allen Key #07-00001 1 3 ASSEMBLY INSTRUCTIONS 1 3 3 3 B 1a ! Insert Wooden Pins (B) into the top hole on the Side Rails (3) on both ends. Repeat for other side rail. 2 B D Note: Angled edge of legs face outwards as shown with the larger holes for the cross dowels on the same side facing in. 3 3 2 A 1 Place legs with the larger holes facing towards you. 1 2a ! The pilot holes for the plastic strap should face inside. To attach the Side Rail (3) to the Legs (1 & 2) simply line up the wooden pins you inserted in Step 1 into the top hole on the flat surface of the legs. Ensure that you have one (1) leg and one (2) leg as shown in image. Bolt together using the 55mm Allen Head bolt (A) tightening with Allen key (D). Repeat for other side. 3 ! Attach the Curved Base Rail (4) to the leg assembly with four 55mm Allen Head Bolts (A) as shown. Ensure bolts are tightened securely. Repeat for other side. 2 1 4 A A D 1 4 3a 4 ASSEMBLY INSTRUCTIONS 4 D 2 5 A 1 1 5 5 5 4a 5 Insert one of the end of the Dowel Cross Rails (5) into the large hole on the side assembly. The dowel should go into the hole tightly as shown in 4a. Some gentle tapping may be required. Bolt the dowel into place with a 55mm Allen Head Bolt (A) and tighten in place. Repeat for the three other ends of the dowels. ! D 5 1 A 5 2 1 5 5 5a ! 5 Place partially assembled unit on its side as shown. Line up the second side assembly with the four dowels and press together. Ensure the dowels are fully inserted into the holes. Secure in place with four 55mm Screws (A) as shown. 6 ! Attach the Plastic Rail (6) by first lining up the two holes on the end with the two guide holes on the Side Rails (3) as shown in 6a. You will need a Philips screw driver for this task (not supplied). Screw firmly in place. Repeat for other end of plastic rail. When done simply attach the other plastic rail to the other end as shown. 5 6 3 2 C 3 6 3 1 1 C 6 2 C 1 6a 5 Notes: Product Packaging Information Model #: Kooltrade Ltd. 3 Orbital Way, Denton Manchester, M34 3QA Colour: Date: Shipment Ref. #: MADE IN CHINA 6