Transcript
Product Information
NB1600 Industrial Router for M2M Applications
Applications The NB1600 is typically used in industry, commerce and transportation: Wireless Internet Access Point Protocol Converters Device Server Multi-WAN-Router VPN-Router Remote Access CCTV
Key Features The key functions of the NB1600WIAP are: 3G/HSPA+ connection WiFi/WLAN 802.11 b/g/n Antenna diversity User programmable 2 Ethernet ports Digital I/O ports DIN-Rail or wall mount Extended temperature range
NetBox Software Easy to configure Flexible Firewall Port forwarding OpenVPN Client/Server, IPSec Connection monitoring with automated repair
[email protected] www.netmodule.com
The NB1600 supports one or more WiFi wireless networks and connects them via 2G/3G to the Internet. It can also be used as an industrial firwall or LAN-LAN router with VPN support. The Wireless Internet Access Point (WIAP) provides other devices wireless internet access. With the Multi-SSID function several separated WiFi networks can be operated at the same time. The WiFi interface can also be configured as a client as well as one Ethernet port can be connected to a local network. In this multi-WAN configuration, the device operates as a least cost router with automatic fall-back in the case of a failure. The NB1600-Wireline industrial firewall function separates the local network from the factory lan and allows the connection of a system to a central server using only one VPN connection. Using TCP port 80 for the VPN allows passing most firewalls in a factory or on customer side. Configured as VPN-Router up to 10 VPN connections can be terminated in the device. All configurations and keys can be generated with the NetBox using the powerful web interface. In its role as device server the NetBox can convert both the serial as well as the USB interface to IP to enable remote access to the interface. Any PC which has IP connection to the NetBox can use the remote USB or RS-232 device as if it were directly connected. This allows the use of the original driver will be made possible. The digital I/O can be configured and programmed by any device which is directly attached or from remote. Based on the state change of the input ports an application can be informed, the behavior of the NetBox can be controlled or e.g. a SMS is send to a group of numbers. Using the NetBox SDK a user can program the NB1600 using a simple script to implement all kind of applications. Preprocessing can be done directly on the router, which can save an additional IPC. Other features and services are DHCP server, DNS proxy, Dynamic DNS Agent, SNMP agent, Telnet server, SSH server, Web server and e-mail and SMS. The instrument is operated by the Web Manager or via command line. Firmware update can be easily being performed from remote in a fail safe manner as well configuration update. With the SNMP interface the NetBox can integrated in a network management system for supervision.
Product Information
Features Multimode HSDPA, HSUPA, UMTS, EDGE, GPRS and GSM
Mobile interface
Global connectivity with quad-band 3G (850/900/1900/2100 MHz) and quad-band 2G (850/900/1800/1900 MHz) Data rates: max. 14.4 Mbps downlink / 5.76 Mbps uplink, Power Class 3 (+24 dBm) Antenna connector: SMA female
Operation Modes: Access Point or Client. Max users in Access Point mode: WPA: 54, WPA2: 110 WiFi
Frequency: 2.4 GHz. Supported Standards: IEEE 802.11b: 1-11 Mbps, IEEE 802.11g: 6-54 Mbps, IEEE 802.11n (Draft 7.0): 6.5-150 Mbps Antenna connector: SMA female
Ethernet
2 Ethernet ports, 10/100 Mbps, Auto MDX, bridged or routed Connector type: RJ45 2 digital inputs, maximum input voltage 40 VDC, minimum voltage for level 1 (set): 7.2 VDC, maximum voltage for level 0 (not set): 5.6 VDC. Note: a negative input voltage is not recognized.
Digital I/O
2 digital outputs, limiting continuous current: 1 A, maximum switching voltage 60 VDC, 42 VAC (Vrms), maximum switching capacity: 60 W Connector type: 8 pins of 15-pin terminal block
Serial interface
Protocol: 3-wire RS232 Connector type: 3 pins of 15-pin terminal block
Service interface
USB host interface, providing support for memory devices Connector type: USB type A
Power
Redundant power supply inputs Input voltage: 12V DC to 48V DC (-15% / +20%) Max. power consumption: 5W Connector type: 2+2 pins of 15-pin terminal block
Environment
Temperature range: -25 °C to +70 °C Ingress Protection Rating: IP40
Dimensions, weight
124.2mm x 45mm x 110mm, ca. 450g
MTBF
60'000h
Safety standards
EN60950-1:2006
EMC standards
EN301489-1 V1.7.1, EN301489-7 V1.3.1 (Emission) EN61000-6-2:2005, EN50121-3-2:2006 and EN50121-4:2006 (Immunity)
Type approval
CE according to R&TTE
Order number
Other variants and customer specific configurations possible - please contact us
NB1600 NB1600-W NB1600-U NB1600-UW NB1600-L
Router, industrial firewall, device server, VPN concentrator and gateway WLAN/WiFi router UMTS/3G router UMTS/3G router with WLAN/WiFi LTE/4G router
NetModule AG Meriedweg 11 3172 Niederwangen
T +41 31 985 25 10 F +41 31 985 25 11
NetModule GmbH Frankfurter Strasse 92 65760 Eschborn
T +49 6196 77 99 79 0 Germany F +49 6196 77 99 79 9
[email protected] www.netmodule.com
Switzerland
Errors reserved | 13/09/2012 © NetModule AG | Product Information NB1600
