Transcript
Front panel relay sockets (1) Quick Go/No‐Go Indication (5) PASS/FAIL dual color (Red/Green) LED status (5) Easy to connect alligator clamp connectors (3) with 4‐ft cables (6) No Battery Required Easy to see (red) test button (4) Convenient 4‐ and 5‐pin selector switch (2)
WARNING: Risk of Electrocution. Keep hands and fingers away from metal probe clamps and relay insertion points CAUTION: Read, understand and follow Safety Rules and Operating Instructions in this manual before using this product. Do not attempt to repair unit. There are no user serviceable parts. Do not expose the unit to extreme temperatures or high humidity Do not use the unit if it is wet or damaged Do not apply more than the rated current and voltage Do not operate with the case open This symbol, adjacent to another symbol or terminal, indicates the user the user must refer to the manual for further information. This symbol, adjacent to a terminal, indicates that, under normal use, hazardous voltages may be present Double insulation
Safety
• • •
• • • •
Features
5. 6.
4.
3.
1. 2.
Coil resistance Surge suppression Open/closed contact integrity Contact cycling test for intermittent failure detection Loaded contact continuity Relay close‐to‐open time
Turn the vehicle’s ignition OFF. Carefully connect the meter’s alligator clamps to the vehicle’s 12V battery for power. First connect the Black cable to the ground post (negative ‐) and the red to the positive (+) post. Relays are plugged directly into the face of the meter for testing. Choose the socket configuration (there are three) that matches the relay under test. Use the 4‐pin/ 5‐pin slide switch to match the relay under test. Press the TEST button for 2‐3 seconds to perform the test. Read the Pass/Fail LED indicator status light for test result.
Quick Go/No‐Go testing indicates the status of a common 4‐ or 5‐pin automotive relay. The AUT100 tests the following conditions:
Operating Instructions
Dimensions and Weight Cable lead length
AUT100-EU-EN V1.0 07/13
www.extech.com
All rights reserved including the right of reproduction in whole or in part in any form
Copyright © 2013 FLIR Systems, Inc.
ISO 9001 Certified
FLIR Commercial Systems, Inc., 9 Townsend West, Nashua, NH 03063 USA
Technical Support: Option 3; E‐mail:
[email protected] Repair & Returns: Option 4; E‐mail:
[email protected] Product specifications are subject to change without notice Please visit our website for the most up‐to‐date information www.extech.com
Support Lines: U.S. (877) 439‐8324 International: +1 (603) 324‐7800
FLIR Systems, Inc. offers repair and calibration services for the Extech Instruments products we sell. NIST certification for most products is also provided. Call the Customer Service Department for information on calibration services available for this product. Annual calibrations should be performed to verify meter performance and accuracy. Technical support and general customer service is also provided, refer to the contact information provided below.
Calibration, Repair, and Customer Care
FLIR Systems, Inc. warrants this Extech Instruments brand device to be free of defects in parts and workmanship for one year from date of shipment (a six month limited warranty applies to sensors and cables). If it should become necessary to return the instrument for service during or beyond the warranty period, contact the Customer Service Department for authorization. Visit the website www.extech.com for contact information. A Return Authorization (RA) number must be issued before any product is returned. The sender is responsible for shipping charges, freight, insurance and proper packaging to prevent damage in transit. This warranty does not apply to defects resulting from action of the user such as misuse, improper wiring, operation outside of specification, improper maintenance or repair, or unauthorized modification. FLIR Systems, Inc. specifically disclaims any implied warranties or merchantability or fitness for a specific purpose and will not be liable for any direct, indirect, incidental or consequential damages. FLIR’s total liability is limited to repair or replacement of the product. The warranty set forth above is inclusive and no other warranty, whether written or oral, is expressed or implied.
Coil Resistance Contact Resistance threshold Operating Temperature Storage Temperature Altitude Relative Humidity
Automotive Relay Tester
20 to 500Ω 200mΩ o 0 to 50 C (32 to 122°F) o ‐20 to 60 C (‐4 to 140°F) 2000m (7000 ft.) maximum o 80% to 31 C, decreasing linearly to o 50% at 50 C 128 x 68 x 30mm (5” x 2.7” x 1.2") 181g (0.4 lbs.) 1.2m (4 ft.)
Warranty
Specifications
Model AUT100
USER GUIDE
