Transcript
Juice Encoders / Series EN 9200&EN9400 SDI / HDMI / CVBS Juice EN9200/9400 are a series of high density H.264 HD/SD & MPEG-2 SD real time encoders. This blade type design integrates 4 independent encoders, 1 reMultiplexer, 1 ASI_in, 1 ASI_out, and 1 Gigabit (GbE) TS/IP port. New MPTS could be generated with the built-in reMultiplexer from any combination of services among ASI_in, TS/IP_in and the local encoders. HDMI and HD/SDI inputs are available as factory hardware options. All models provide two TS/IP operation modes. The first is “Full Duplex”, allows one MPTS or SPTS inputted to make up a new MPTS with local encoders, then sends the new one over IP & ASI_out. In the second mode“Multiple output ” which delivers up to five streams over IP. There are four un-stuffed SPTS (lower bit rate but less PCR accurate than normal SPTS, from local encoders) and one MPTS (from internal reMultiplexer) over the IP with different Unicast or Multicast IP addresses. Juice EN9200/9400 series modules can be fitted into our MR9000 chassis (19” x 4RU, 8 slots, Dual power supplies).
Front Panel
Back Panels
EN9400SDI
EN9400H
EN9200CVBS
Key Features Compliant with H.264/AVC Baseline, Main & High Profile @ L4.0 or less & MPEG-2 MP@ML 4 independent AV inputs (SDI, HDMI) Internal reMultiplexer, new MPTS is made up from ASI_inm TS/IP_in & Local Encoders MPTS remultiplexed and 4 local un-stuffed SPTS available over IP Video Input Resolution: 1080i, 720p, 576i, 480i Minimum Video Bit Rate 500Kb/s (Standard PAL or NTSC SD video, while total bit rate ~ 700Kb/s Independent Vertical & Horizontal pixel scale VBR & CBR Audio coding: MPEG1 Layer II, MPEG2/4 AAC-LC SNMP & HTTP WEB for monitoring & control Fit to MR9000
Specification Video Input & compression Coding Video Input Interfaces
4x HDMI, 4x SDI, or 4x CVBS
Coding Profile & Level
H.264/AVC BLP, MP, HP @ L4.0 or less, MPEG-2 MP@ML
Sampling Format
4:2:0, 10-bit, YCbCr
Compression Bit Rate
600K~20Mbps
Video Resolution & Recommend Compression Bit Rate H.264
1080i（1920×1080）@25Hz,29.97Hz,30Hz:SMPTE274M: 1~20Mb/s 720p（1280×720）@25Hz,29.97Hz,30Hz:SMPTE296M: 1~20Mb/s 480i（720×480）@29.97Hz:SMPTE656M: 600K~10Mb/s 576i（720×576）@25Hz: SMPTE656M:600K~10Mb/s
Video Resolution & Recommend Compression Bit Rate MPEG 2
480i（720×480）@29.97Hz:SMPTE656M: 3~10Mb/s 576i（720×576）@25Hz: SMPTE656M: 3~10Mb/s
Video Resolution Down Scaling
Vertical & Horizontal adjustable respectively (frame rate is not scalable)
Aspect Ratio
4:3, 16:9 Selectable
Audio Input & Compression Coding Audio Input Interfaces Coding Standard Sampling Rate Recommend Compression Bit Rate
HDMI/SDI Embedded or Analog MPEG1 Layer II MPEG2 AAC-LC, MPEG4 AAC-LC 48KHz MPEG1 Layer II :32~192Kbps(mono), 64~384Kbps( stereo), MPEG2 AAC-LC, MPEG4 AAC-LC :56~256Kbps(mono), 112~512Kbps( stereo)
DVB-ASI Input Input Interface
BNC Female, 75Ω
Maximum Bit Rate
100 Mb/s
Data Type
Byte
Packet Length
188/204 Bytes
Signal Level
200 ~ 880mVp-p
DVB-ASI Output Input Interface
BNC Female, 75Ω
Effective Bit Rate
120Mb/s
Data Type
Byte
Packet Length
188/204 Bytes
Signal Level
800±80mV
TS/IP Gigabit Ethernet Standard
IEEE 802.3, 10/100/1000 Base-T
Maximum Effective Bit Rate
80Mb/s , 200Mb/s
Encapsulation
SPTS or MPTS
Protocol
UDP, RTP, ICMP, ARP, IGMPv2
Rear Panel options ASI In
1 x BNC Female, 75Ω
Specification SDI In
4 x BNC Female, 75Ω (D
HDMI In
4 x HDMI Socket, 75Ω (D MM-2410EC-H or DMM-2411EC-H, see Model List) 2 x D-Sub15 (with D-Sub 15 to BNC female adapter cablings, total 4 sets of inputs, see Model List) 2 x BNC Female, 75Ω(1 Backup)
CVBS In & Analog Audio In ASI Out
MM-2410EC-S or DMM-2411EC-S, see Model List)
Front Panel Control
1x RJ-45, 10/100 Base-T
TS/IP
1x RJ-45, 10/100/1000 Base-T
LED
1x Power, 4x Encoder Status, 1x ASI/IP Status
IP Reset
Press for 5 second or more to return the default IP address of control port
Reset
Local reset
Others Power
DC 3.3V/5V/12V, from DMM-1000 (8-slot) or DMM-200 (2-slot)
Operating Temperature
0 ~ 40°C
Storage Temperature
-10 ~ 60°C
Operating Humidity
10 ~ 90% (Non-condensed)
TS/IP “Output Only” mode (EN9400H) DMM-2410EC/2411EC Function Block Diagram (Multi-Channel)
HD-SDI In -1 / HDMI In -1 . . .
HD-SDI In -4 / HDMI In -4
H.264 SD/HD MPEG-2 SD Encoder -1
Cable Equalizer -1 /HDMI Receiver-1 . . .
. . .
H.264 SD/HD MPEG-2 SD Encoder -4
Cable Equalizer -4 /HDMI Receiver-4
ASI In
TS Over IP
TS/IP Out (4xSPTS+1MPTS)
TS Processor (MUX&Pass through)
Reset IP Reset LCD/LED
MCU
Control
ASI Transmitter
Handset DMM-1000PS Power Supply
ASI Out *1 ASI Out *2
Power Supply
Model numbers & Order Information EN9200AV
Mode Interface
EN9400H
HD/SD SDI with Embeded Audio Input
EN9200AV+AAC
EN9400H+AAC EN9400SDI+AAC x4
x4
HDMI with Embeded Audio CVBS & Analog Audio
EN9400SDI
x4
x4 x4
ASI TS Input TS/IP (GbE) ASI (1+1) TS Output TS/IP (GbE) Audio AAC-LC Encoding
Function block diagrams
x4
