Transcript
NBase Communications NC316-2BU Fiber Driver
Features
. . . . .
Dual module powered chassis Accommodates any 316 Expansion Modules Two or Four Port 10/100 switch Rack Desk –Top or wall mount available Management by any SNMP compliant device or software
About the NC316 Fiber Driver Series This document will explain how to properly install the NC316BU-2/AC Fiber Driver. The NC316 Fiber Driver series are designed to accommodate a variety of slide-in modules, which perform different functions such as converting multi-mode to single-mode signals, converting 100BaseTX to 100BaseFX, and many others. Please check our web site (http://www.nbase-xyplex.com/) for more information on the NC316 Fiber Driver series. A variety of optics are available (on the fiber modules), with varying output levels, so you may precisely tailor the unit to meet your distance requirements. The NC316 Fiber Driver comes with an internal auto-ranging power supply unit that allows operation worldwide, without the hassles and limitations of external adapters.
Installation 1. 2. 3. 4.
Place the unit on a flat surface and connect the power cord. Verify that the Module Power LED illuminates. Attach the data cables (please refer to the specific EM316 Expansion Modules Installation Guide for the device specification on the expansion module that was installed on the converter). Install the EM316 expansion module as shown in below.
P/N: 1225003-001, REV. A
PAGE 1 OF 2
NBase Communications NC316-2BU Fiber Driver
Expansion Modules (EM316) Ordering Information STANDALONE CHASSIS FOR MODULES MODEL NUMBER NC316-2BU/xx
FUNCTION
CHASSIS - SINGLE SLOT - INTERNAL PS 95-240V DESKTOP
EXPANSION MODULES FOR NC316-2BU / NC316-4BU / NC316-16BU MODEL NUMBER FUNCTION (AVAILABLE MODEL/CONFIGURATIONS) (xx refers to different models) EM316E/xx RJ45 10BASE TX TO 10BASE FX - ST CONNECTOR (M/MX/S1/S2/S3) EM316F/xx 100BASE TX RJ45 TO 100 BASE FX (M/MX/S1/S2/S3) EM316G/xx CONVERT 1000 BASE FX SX TO LX (S1/S2/S3) EM316A/xx MM TO SM FOR ATM (1/2/3; 1 for S1, 2 for S2, 3 for S3) EM316FD/xx MM TO SM FOR FDDI (1/2/3; 1 for S1, 2 for S2, 3 for S3) EM316O3/xx MM TO SM FOR OC3 (1/2/3; 1 for S1, 2 for S2, 3 for S3) EM316O12/xx MM TO SM FOR OC12 (1/2/3; 1 for S1, 2 for S2, 3 for S3) EM316FSF/xx 100BASE TX RJ45 TO 100BASE FX MM SINGLE FIBER LINK (S2/S3) EM316GSF/xx CONVERT 1000 BASE FX SX TO LX SINGLE FIBER LINK (S2/S3) EM316ASF/xx MM TO SM FOR ATM SINGLE FIBER LINK (S2/S3) EM316FDSF/xx MM TO SM FOR FDDI SINGLE FIBER LINK (S2/S3) EM316O3SF/xx MM TO SM FOR OC3 SINGLE FIBER LINK (S2/S3) EM316O12SF/xx MM TO SM FOR OC12 SINGLE FIBER LINK (S2/S3) NETWORK MODULES MODEL NUMBER
FUNCTION
EM316-4/SW EM316-2SW/xx EM316NM
4 PORT 10/100 ETHERNET NON MANAGED SWITCH 2 PORT 10/100 ETHERNET NON MANAGED SWITCH (M/MX/X1/S2/S3) FIBER DRIVER NETWORK MANAGEMENT MODULE
REPEATING MODULES MODEL NUMBER
FUNCTION
EM316FR/xx EM316GR/xx
F.ETHERNET FIBER OPTIC FULL DUPLEX LINK REPEATER G.ETHERNET FIBER OPTIC FULL DUPLEX LINK REPEATER
Support If you have any questions, please do not hesitate to contact our technical support office at : NBase-Xyplex 295 Foster Street Littleton, MA 01460-2016 Tech Support: (800) 338-5316 E-mail:
[email protected] Fax: (978) 952-4880 URL: http://www.nbase-xyplex.com The most recent version of this manual (in pdf format) may be found on our ftp site: ftp.nbase.com/home/ftp/pub/snmp_agent/manuals
P/N: 1225003-001, REV. A
PAGE 2 OF 2
