Transcript
NCC LifeLINK — Network Command Center ENGINEER AND ARCHITECT SPECIFICATIONS l
MXL Network Command Center
l
PC Based Utilizing MS-DOS Platform
l
Control and Monitoring up to 63 MXL Systems
l
700,000+ Points
l
Multiple NCCs in an MXL Global Network
l
Color Event Display
l
Bilingual Operation Support
l
Disk Based History Log with Report Generation
l
Multi-level Operator Password Protection and Log On
l
Networked System Time Synchronization
l
Fully Supervised
l
Printer Supervision
l
Help Menus
l
User Programmable Macros
l
Rack Mount or Desk Mount
l
Key Lock Protected Floppy Disk Drive
l
Listed, ULC Listed, CSFM and NYMEA Approved
Description The MXL network command center (NCC) is a PC based unit which provides the ability to monitor and control up to 63 networked MXL systems. The NCC connects to the MXL’s network via the NIM-1R module. It allows an operator to view and respond to system events as well as generate maintenance reports. The NCC indicates the status of all MXL networked system events in a color text format. The NCC also contains a global system status window which indicates the condition status of each MXL panel in the network. The NCC is capable of operating in various modes, depending upon the desired MXL network systems
architecture. The three UL listed NCC configurations possible are:
NFPA 72 Local — Campus Configuration The NCC is in a monitoring mode ONLY. The remote MXL nodes are configured as standalone 72 Local - Campus panels. Local control is through the MXL’s MKB. The NCC displays the current values of analog voltage, sensitivities, etc. The NCC cannot directly acknowledge, silence, or reset a remote node.
NFPA 72 Local — Highrise Configuration The NCC is the primary control point for a collection of MXL nodes. It is capable of block acknowledge, query, and control of the system. The remote MXL nodes are
CATALOG NUMBER
5041
configured as 72 Local - High rise units and may contain their own annunciators (MKB). No local control is possible at a remote MKB unless its node is out of communication with the NCC.
NFPA 72 — Proprietary Configuration
UL Listed Industrial Computer Requirements Required for NCC-G Upgrading Model**
CP7585-33
CP7585-66
CP7585-100
CPU
486SX-33
486DX2-66
486DX4-100
DOS
5.0 or higher
5.0 or higher
5.0 or higher
RAM
8 MBytes
16 MBytes
32 MBytes
Hard Disk
527 MBytes
1 GBytes
1.5 GBytes
Floppy
2.88 MBytes
2.88 MBytes
2.88 MBytes
Event Logging
Graphics Card
IBM XGA-2
IBM XGA-2
IBM XGA-2
The NCC history log retains all systems events on the PC’s hard disk drive in chronological order. The history log size is dependent on the size of the PC’s hard drive. History archiving indications are given when the log has reached 80% of capacity. Custom history reports can be generated directly from the NCC.
SVGA Monitor Models
CP7574 (19”) CP7573-001 (15”)
CP7574 (19”) CP7573-001 (15”)
CP7574 (19”) CP7573-001 (15”)
Touch Screen Option
CP6784 (19” only)
CP6784 (19” only)
CP6784 (19” only)
Serial Ports
COM1, COM2
COM1, COM2
COM1, COM2
Parallel Ports
LPT1, LPT2
LPT1, LPT2
LPT1, LPT2
Ordering Information
(Monochrome) Printer
PAL-1
PAL-1
PAL-1
The NCC is the primary control point for a collection of MXL nodes. It is capable of top event acknowledge, query, and control of the system. The remote MXL nodes are configured as 72 Proprietary units and may contain their own annunciators (MKB). Control is possible from a remote location using an MKB that is behind a locked door.
Model
Part Number
Description Network Command Center Software Package
500-693196
Installation Manual
315-093194
CP7585-33
UL Listed IBM Industrial Computer*
500-694536
CP7585-66
UL Listed IBM Industrial Computer*
500-693930
CP7585-100 UL Listed IBM Industrial Computer*
500-693929
CP7573-001 UL Listed 15" SVGA Monitor
500-694537
NCC
CP7574
UL Listed 19" SVGA Monitor
500-693931
UL Listed Parallel Printer (Monochrome)
500-692407
CP6784
UL Listed Touch Select Touch Screen for 19” Monitor
500-692877
CP6258
19” Rack Mounting Kit for PC (Requires 1 CP6023)
500-694541
CP6023
19” Rack Mounting Slides
500-692874
CP6024
19” Rack Keyboard Mounting Kit comes with Lock (Requires 1 CP6023)
500-692875
CP6314
19” Rack Mounting Kit for 19” Monitor
500-694538
CP6493
19” Rack Mounting Kit for 15” Monitor
500-694540
CP7647
Glass Optical Filter for 19” Monitor
500-694539
PAL-1
** All the above are IBM industrial computers (UL 864 and UL 1076 listed) Note: To obtain 4 hours of standby power the ICS Lifeline model 9300057 UPS is recommended.
* See descriptions under UL listed industrial computer requirements
Cerberus Pyrotronics 8 Ridgedale Avenue Cedar Knolls, NJ 07927 Tel: (973) 267-1300 FAX: (973) 397-7008 Website: www.cerbpyro.com
9/97 10M CPY-IG Printed in U.S.A.
Cerberus Pyrotronics 50 East Pearce Street Richmond Hill, Ontario L4B, 1B7 CN Tel: (905) 764-8384 FAX: (905) 731-9182
September 1997 Supersedes sheet dated 4/96
