Transcript
storage solutions
Network Appliance ™ NearStore ® R200 Specifications Product Highlights Operating System Standard Software Features
Network Appliance Data ONTAP™ 6.5 software Integrated automatic RAID manager, Snapshot™, telnet, e-mail alerts, NIS, DNS, SNMP, FilerView®, NDMP; typical system start-up in 10 minutes NFS V2/V3 over UDP or TCP, PCNFSD V1/V2 for (PC) NFS client authentication, Microsoft® CIFS, VLD, HTTP 1.0, HTTP 1.1 virtual hosts Fibre Channel Protocol (FCP) for SCSI; fabric-attached and direct-attached; iSCSI SnapRestore®, SnapMirror®, SnapVault™, SnapDrive™, MultiStore™, SnapLock™, DataFabric® Manager, Virtual File Manager™, ApplianceWatch™ for HP Openview and Tivoli
Network Protocol Support SAN Protocol Support Licensed Software Products Standard Hardware Features
19" rack-mount enclosures, hot-plug disk drives, redundant hot-plug cooling fans and power supplies, full-duplex 10/100Base-T Ethernet on board, Compact Flash™, diagnostic LEDs/LCDs, 16 A x 4 220 V 42U 19" cabinet (recommended) Max. (and default): 12 data + 2 parity; min.: 1 data + 2 parity Note: Two-drive root volumes to be configured with single-drive parity (RAID4)
RAID Group Sizes
16TB (56 disk drives)
ATA Disk Drive Capacity Supported1
Right-size (usable) capacity of 274.4GB
NearStore Specifications
Min. Configuration
Max. Configuration
8.1TB 2 28
96.7TB 24 336
1/9 6GB 256MB
6/112 6GB 256MB
8 5 compatible PCI slots Copper: 4 expansion cards max. Fiber: 5 expansion cards max. 4 expansion cards max. 3 expansion cards max.
7 5 compatible PCI slots Copper: 4 expansion cards max. Fiber: 5 expansion cards max. 4 expansion cards max. 3 expansion cards max.
Optional Host Attach for SAN (total): Dual-Port FCP Adapter (fiber)
2 compatible PCI slots 2 expansion cards max.
2 compatible PCI slots 2 expansion cards max.
Optional Tape Adapters (total): Dual-Port LVD/SE SCSI Single-Port FC-AL copper Dual-Port FC-AL fiber
7 compatible PCI slots
7 compatible PCI slots
3 expansion cards max.
3 expansion cards max.
System Storage Capacity Raw Storage Capacity Number of DS14mk2 AT Shelves Number of Disk Drives Volumes (min./max.) Min. of 1 RAID Group per Volume ECC Memory Nonvolatile Memory Available PCI-X Slots2 Optional Network Connectivity (total): Single-Port Gigabit Ethernet (copper or fiber) Dual-Port Gigabit Ethernet (copper or fiber) Quad-Port Gigabit Ethernet (copper)
NearStore Environmental Specifications
Min. Configuration
Max. Configuration
AC Power/Current Storage Engine Storage (per DS14mk2 AT)
100 to 240VAC 100–120/200–240VAC
System Current Rating Storage Engine Storage (per DS14mk2 AT)
6.0 to 12.0 A 3.5 to 7.0 A
System Current, Actual Storage Engine Storage (per DS14mk2 AT)
2.0 to 3.8 A 3.95 A
Per 8TB Capacity Increment
System Power, Actual Storage Engine Storage (per DS14mk2 AT)
1,042 W
8,544 W 330 W 356 W
712 W
System Thermal Rating Storage Engine Storage (per DS14mk2 AT)
3,556 Btu/hr
29,160 Btu/hr 1,126 Btu/hr 1,215 Btu/hr
2,430 Btu/hr
hardware Network Appliance hardware gives you the industry’s most flexible, reliable, and scalable storage solutions, with easy administration and built-in redundancy for maximum data availability and protection.
Max. Volume Size
NearStore Environmental Sepcifications (cont.)
Min. Configuration
Max. Configuration
Per 8TB Capacity Increment
System Weight Storage Engine Storage (per DS14mk2 AT)
259 lb (117 kg)
1,954 lb (886 kg) 106 lb (48 kg) 77 lb (35 kg)
154 lb (70 kg)
System Height Storage Engine Storage (per DS14mk2 AT)
12 U—20.8" (52.8 cm)
78 U—136.3" (346.2 cm) 6 U—10.3" (26.2 cm) 3 U—5.25" (13.3 cm)
6 U—10.5" (26.7 cm)
Width
19" IEC rack compliant (17", 43.2 cm)
System Depth Storage Engine Storage (per DS14mk2 AT)
22" (55.9 cm) 21.75" (55.2 cm)
Temperature Operating Max. Range Operating Recommended Range Nonoperating
10°C to 40°C (50°F to 104°F) 20°C to 25°C (68°F to 77°F) -20°C to 65°C (-4°F to 149°F)
Relative Humidity Operating Nonoperating
20% to 80% RH, noncondensing 8% to 95% RH, noncondensing, in original container
Operating Acoustic Noise Head Storage (per DS14mk2 AT)
49.5 dBA at 23°C 48.7 dBA at 25°C
Min. Service Clearances Head & Shelves
1.5" (3.8 cm) for bezel, 25" (63.5 cm) front; 40" (101.6 cm) rear
Network Appliance System Cabinet Includes 2 Sets of Dual 16 A, 0 U Power Distribution Units
Accommodates one R200 equipped with 48TB (two cabinets required for 96TB configuration)
AC Power
200 to 240VAC
Current
32 A total—two redundant sets of dual 16 A cables with NEMA L6-20 or IEC 309 connectors
Dimensions (height/width/depth)
200 cm (78.75")/60 cm (23.6")/90 cm (35.4")
Min. Clearances
48" (122 cm) front and rear
Shipping Height
230 cm (90.6")
Weight (empty)
125 kg (275 lb)
NetApp NearStore R200 Storage System Regulations R200 Head Safety
EN 60950, CE, UL60950, CSA 60950, TUV 60950, CB (all national deviations), EN60825-1
R200 Storage Shelf Safety
UL/C-UL; CE; CB (all national deviations)
Emissions
FCC Class A, EN 55022:1998, EN 61000-3-2, EN 61000-3-3, CE, BSMI, AS/NZ 3548, VCCI
Immunity
EN 55024:1998
NearStore R200 FC Switch Support FC Switch Vendor
Model Number
Application
Min. Firmware Level
Brocade
2400
Tape Backup
2.2.2a
Brocade
2800
Tape Backup
2.2.2a
Brocade
SW3200
SAN Connect for Storage & Tape
3.0.2c
Brocade
SW3800
SAN Connect for Storage & Tape
3.0.2c
Brocade
SW3900
SAN Connect for Storage & Tape
4.0.2c
Brocade
SW12000
SAN Connect for Storage & Tape
4.0.2c
Cisco
MDS-9120
SAN Connect for Storage
1.2
Cisco
MDS-9140
SAN Connect for Storage
1.2
Cisco
MDS-9216
SAN Connect for Storage
1.2
Cisco
MDS-9506
SAN Connect for Storage
1.2
Cisco
MDS-9509
SAN Connect for Storage
1.2
McData
3000 Series
SAN Connect for Storage
4.01
McData
4000 Series
SAN Connect for Storage
4.01
McData
6000 Series
SAN Connect for Storage
4.01
NearStore R200 Tape Drive Support Qualified Tape Devices
Interface 3
Exabyte 8900 (Mammoth–1)
LVD SCSI
Exabyte Mammoth–2
LVD SCSI or FC
HP Ultrium (LTO)
LVD SCSI
IBM 3590B & 3590E
FC
IBM ULT3580-TDI (LTO)
LVD or FC
IBM Ultrium-TDI (LTO)
LVD or FC
Quantum DLT 7000
SE SCSI
Quantum DLT 8000
LVD SCSI
Quantum Super DLT-1
LVD SCSI
Quantum SDLT 320
LVD/HVD SCSI
Seagate Ultrium (LTO)
LVD SCSI
Sony AIT-1
LVD SCSI
Sony AIT-2
LVD SCSI
Sony AIT-3
LVD SCSI
Sony GY 8240 (DTF2)
FC
STK 9840, 9840B, and 9940
FC
Recommended Max. Number of Tape Drives per SCSI Channel LVD/SE SCSI (2 channels per adapter card)
4
FC
Not applicable 1
2 3
Network Appliance, Inc. 495 East Java Drive Sunnyvale, CA 94089 www.netapp.com
Drive and system capacities stated assuming Network Appliance convention of 1,048,576,000 bytes per gigabyte (GB). Industry standard is 1,000,000,000 bytes per GB. To determine industry standard equivalent capacity, multiply NetApp specification by 1.049. For a base system configured only with SCSI host bus adapters for disk shelf connections. Interface types: FC or FC-AL = Fibre Channel; LVD = Low Voltage Differential; HVD = High Voltage Differential; SE = Single-Ended; SE and LVD cannot be mixed on an adapter.
Specifications are subject to change without notice. Contact Network Appliance for current expansion adapter maximums. © 2003 Network Appliance, Inc. All rights reserved. NetApp, DataFabric, NearStore, SnapMirror, FilerView, SnapRestore, and the Network Appliance logo are registered trademarks and Network Appliance, Snapshot, SnapDrive, MultiStore, ApplianceWatch, SnapVault, Data ONTAP, SnapLock, Virtual File Manager, and The evolution of storage are trademarks of Network Appliance, Inc., in the U.S. and other countries. Microsoft is a registered trademark of Microsoft Corporation. All other brands or products are trademarks or registered trademarks of their respective holders and should be treated as such. DS-2472-1103
