Transcript
PRELIMINARY DATASHEET
NEC NC1040L
NEC NC1040L Cinema Laser Projector
ORDER CODE
The future starts now with the new NEC NC1040L 4K Laser projector. Delivering outstanding resolution and for the first time on any projection system, colours beyond the DCI or Adobe RGB specifications. Your movies and animations will appear more vibrant and stunning than ever before, thanks for the increased colour spectrum of laser. Characters will appear in more details, thanks to the 4K resolution and accuracy of laser light. The NEC NC1040L is a Premium Solution for Cinemas, Post Production, Rental/Staging, Virtual Reality and Industrial Design.
DELIVERING GENUINE BENEFITS 4K Projection is the ideal solution for highest picture quality - with it’s super high resolution image (over 4 times greater than conventional Full HD).
Present the best colours that you have ever seen with the
OUTSTANDING PERFORMANCE •
PREMIUM SOLUTION WITH THE LIGHT SOURCE OF THE FUTURE Create outstanding images on screens up to 9.5 m using the latest light source.
•
HIGH RESOLUTION AND CONTENT with the latest 4K Media and DLP® Cinema Technology from Texas Instruments. This projector faithfully reproduces digital cinema and 4K high-definition input sources requiring superior colour reproduction by utilising the wider colour gamut of Laser Light Source.
•
HIGH RELIABILITY. The Solid Light Source of the NC1040L provides up to 20,000 hours of expected life at a more stable brightness level without any need of lamp exchange.
amazing colour space of the Light Source of the future - LASER
Enjoy Lower TCO - No need to change any lamp, therefore no more lamp cost and very low service costs with the additional benefit of lower power consumption.
Easy Installation - The small projector head and laser source connected by a fibre tube offer ulitmate flexibility.
NEC Information: This document is © Copyright 2010 NEC Display Solutions Europe GmbH. All rights are reserved in favour of their respective owners. The document, or parts
Call: +49 (0)89/99 699-0
thereof, should not be copied, adapted, redistributed, or otherwise used without the prior written permission of NEC Display Solutions Europe GmbH. This
Email:
[email protected]
document is provided “as is” without warranty of any kind whatsoever, either express or implied. Errors and omissions are excepted. NEC Display Solutions Europe GmbH may make changes, revisions or improvements in, or discontinue the supply of any product described or referenced in this document at any time without notice. 25. June 2013
www.nec-display-solutions.com
NEC NC1040L
Technical Specifications NEC NC1040L PROJECTION METHOD
3-chip DMD reflection method
OPTICAL Screen size
up to 9,5 m at 1.8 Gain
Brightness
5000 Lumen by using one Laser Source modul
Contrast Ratio
2000:1 (full on/off)
Light Source
External Laser Light source connected by fiber tube
Lenses
Zoom / Focus: Motorized; Motorized Shift: Horizontal/Vertical Motorized Other: Dowser (light shutter); Lens memory stores lens setting (shift/ zoom/focus); Range of shift is dependent on lens 1.13-1.66:1 1.30-1.85:1 1.44-2.16:1 1.63-2.71:1 1.95-3.26:1 2.71-3.89:1
•
MINIMAL MAINTENANCE and no lamp replacement required and maintains more stable brightness. A cost saving operation.
•
OUTSTANDING PERFORMANCE. Full 4K resolution of 4096 x 2160 and an unrivalled colour space create unequalled image quality for the most discernible Cinema, Graphics or even Theme Park applications.
•
NEC OPTIONAL INTEGRATED MEDIA SERVER (IMS) as one stop solution.
DMD Specifications
4096 x 2160 Chip: 1.38’’ DLP Tilt Angle [°]: 12
•
HIGH FRAME RATE (HFR) CAPABILITY - 48 and 62 fps.
Cooling method
Liquid: Liquid cooling inside, air cooling with dust-preventing electrostatic filter Demand of exhaust duct: NO
•
EXPANDABLE BRIGHTNESS by simply adding additional Laser Modules.
•
GREAT CONNECTIVITY FOR 4K VIRTUAL REALITY or Industrial Design with the four 3GSDI input board option.
CONNECTIVITY External Controls
1 x D-Sub 37 pin (GPIO); 1 x D-Sub 15-pin (3D); 1 x DSub 9 pin (RS-232); 1 x D-Sub 9-pin; 1 x Remote control connector; 1 x USB port (Type A); 1 x RJ45
Input Terminals
4 x 3GSDI (BNC) (optional); 2 x DVI-D (optional) 3 x USB
ELECTRICAL
SPECIAL CHARACTERISTICS
Power Supply
Projector Power Supply Unit: 100 to 240V AC, 50/60Hz, single phase Laser Unit: 200 to 240V, 50/60Hz, Single Phases
Power Consumption
Projector Power: 400W (TBD.) Laser Module Power: 1300W typ. (TBD)
Latest Laser Light source, High 4K resolution, Wide Laser colour space, Low TCO, up to 20,000 h expected life time without lamp exchange, flexible installation with separated laser source
ENVIRONMENTAL CONDITIONS Operating Temperature [°C]
10 to 35, Recommended: 10 to 25
Operating Humidity [%]
10 to 85 - non-condensing
Storage Temperature [°C]
-10 to 50
MECHANICAL External Dimensions (WxHxD in mm)*
Projector Head*: 737 x 364 x 666 Laser module: 780 x 652 x 450
Weight [kg]
Projector Head: 50, Laser module: 73
Fan Noise [dB (A)]
Head: <45, Laser module: 54 typ. (TBD)
Regulations
EN55022 1998, Class A; EN55024 1998; EN61000-3-2; EN61000-3-3
OPTIONAL ACCESSORIES
Air filter, IMS option, 4K SIB input board option
WARRANTY
2 year parts warranty
Additional accessories are available. Visit www.nec-display-solutions.com or www.digital-cinema-nec.com for details.
Ecological Material: Eliminate waste and landfill implications
associated with 35mm media. Laser
technology reduces power usage and
reduces replacement materials required.
Save printing waste. All NEC datasheets are available for download at our website www.nec-display-solutions.com and www.digital-cinema-nec.com
DLP Cinema and the DLP Cinema logo are registered trademarks of Texas Instruments. All other brand or product names are trademarks or registered trademarks of their respective holders.
*Excluding lens, lens hood and exhaust stack.
Home
Products
FREE AV guides
Tel: 01754 769967 / 0800 018 9967
Welcome to Wedgwood UK specialist education, medical, government, MOD and business supplier since 1996 with over 9,000 audio visual products
SPECIAL OFFER: Wedgwood AV has partnered with Repeat Software to give you a FREE Repeat Signage V4 Standalone Edition digital signage software licence with any purchase order over £500+VAT.
LCD monitors
This means if you purchase goods to the value of £2,000+VAT you receive 4 Repeat Signage licences, each worth £145+VAT. Also please check our Special Offers page as we have weekly and monthly offers. Plus FREE delivery for our customers, when quoting code: WAV-V4, on your purchase orders.
[email protected] Tel: 01754 769967.
Medical monitors
With Repeat Signage V4 you can easily create a presentation in minutes for your reception area display screen, to promote your own products, services and activities. Exciting new features in V4 allow page-turning PDF’s, conveyor-belt pictures and has touch screen support. www.repeatsoftware.com
Commercial TV
Mounting solutions
Projectors
Whiteboards
Document cameras
Touch screens
Digital signage
Lecterns
Audio solutions
Wedgwood AV Ltd. Tel: 01754 769967 Order fax line: 01754 768036 UK sales:
[email protected] www.wedgwood-group.com
