Transcript
Nera WorldCommunicator - Quickstart 7 The shaded signal strength bar Setting up
1 Open the WorldCommunicator by swinging down the Modem Unit.
2 Unfold the antenna. Use storm locks if necessary. Higher digit 3 Press and hold 2 secs.
for
4 PIN code:
WorldCommunicator Phone PIN : 0 0
09:46
Next digit After 4th Lower digit digit
use multibuttons as indicated (default code: 1 2 3 4).
above equator, see map in "Getting Started" or on CD. Aim the antenna towards the estimated position of the satellite, or make a slow scan across the hemisphere with the vertical angles 60°, 30° or 0° as indicated. If necessary, use the compass. Free line of sight to the satellite is required. Doc. no. 102194
Rev. 2.2 09.04
indication
8 Press
to accept the Ocean Region satellite.
If no spot beam is found from the current satellite, try another Ocean Region.
Storm lock
5 Check antenna cable connections. 6 The four satellites are positioned stationary
Searching regions
appearing in the display increases All in length when closing in on the 0 satellite. Maximum achieved The signal strength should signal strength strength be at least 535 for 64 kbps Signal bar communication. Signal strength
09:46 Use AOR-W ?
535
09:46
t
igh fs e o e lit lin atel e s e Fr the to
ANTENNA
Compass
Elevation lock > Start Lock
52 0
MENU Search terminal 05 : 46
ISDN RS-232
USB
Antenna cable
Battery pack SIM card 30°
MEN Sear 52 Lock 0 term ch U inal
ISDN
05 :
Telenor IOR Ready for call
46
ISDN OK
RS-2
DEL
1
60°
MODEM UNIT
> Start
0°
2
4
ghi
7
pqrs
abc
32 USB
3
def
5
jkl
6
mno
8
tuv
9
wyz
0
ISDN telephone
PC
DECT handset
Nera WorldCommunicator - Quickstart CONT’D Note! Default Net service provider must be programmed the first time an Ocean Region is entered: to open the MENU. • Press Scroll down to Set Default Net . and press at required provider. • Press When using a SIM card, the Net service provider is preset.
Telenor (001) AOR-E Ready for call 630
• 09
MENU > Set Default Net. Configure DTE 520 09:46
High quality 64 kbps speech service is selected via Menu >Active MSN in the Nera ISDN Handset (see Getting Started.)
10 Press
Making a call:
11 Dial 00, country code and subscriber number . Press
ISDN telephone: 9 Connect the ISDN telephone and verify that you have a dial tone. If no MSN number is configured, 4.8 kbps speech quality is automatically chosen.
DECT handset registration:
Enter the WorldCommunicator base station pass word: 1 2 3 4, and confirm • Press when REGISTERED appears in the WorldCommunicator display.
Device Manager
> Add device on the Remove device 535 09:46 WorldCommunicator to enter the MENU. Select Device Manager>Add device>DECT>Speech, and enter Owner's password before pressing . Open to register appears in the display.
• Press to switch ON the DECT handset. • Open the menu. Scroll down: • select and confirm. • select and confirm. • select base station (1 - 4).
0
0
to send the number, e.g.: 4
7
6
7
2
4
4
7
0
0
On DECT also:
Data setup: Use the Windows dial-up networking to programme the server telephone number. Make sure to use the correct modem driver. Note! Some Net providers offer free e-mail and internet access by dialing 28#. Dialing a mobile ISDN compatible server: Connect the computer to the ISDN/RS-232 or USB port. Use the following modem drivers: • ISDN, use a driver matching your PCMCIA/PCI card. • RS-232, use a 33.600 bps driver in Windows. • USB, on computer use the Nera WorldCommunicator USB modem driver (found on the CD). On a Mac computer, use Metric Ricochet Wireless. Dialing MPDS is only possible via RS-232 and USB. Dial number **94#. See detailed regarding use of applications on the Nera WorldCommunicator CD.
