Transcript
Domo Tactical Communications (DTC)
NETNode IP Mesh Radio Phase 4 (Robust) – 5W COFDM – Video, Audio Telemetry and IP Products
June 2016 Data Sheet
The highly flexible mesh topology means that data can be exchanged between nodes in a point-to-point or multi-point fashion; range can be extended by using nodes as repeaters. The self-forming, self-healing mesh architecture makes the NETNode product ideal for use in marine and mobile surveillance applications, command and control applications, or advanced robotics. The Maritime radio has an inbuilt 5W power amplifier offering linearized 37dB The NETNode can be connected to third party composite cameras using the AVI option. Two PTZ control channels are available to enable control of third party PTZ cameras. Alternatively, there are dedicated IP PTZ camera solutions available for direct connection to the NETNode e.g. CAMPTZ* is a high performance, high quality day/night Domo Tactical Communications (DTC) PTZ camera for long range and overt NETNode IP mesh radios are the latest surveillance, this option requires the AVI innovations in the expanding range of DTC option to be fitted. Third party IP cameras solutions improving surveillance connectivity. can also be directly connected to the NETNode. NETNode IP radios can be combined in a fluid self-forming, self-healing mesh Security of the entire mesh network can be containing up to sixteen radios. The ensured by the use of the optional AES128 NETNode radios within the mesh exchange or AES256 encryption. data on a single frequency, simplifying frequency management. The entire mesh Control of the deployed mesh is achieved occupies just 2.5MHz of bandwidth (3.0, 3.5, using the inbuilt web browser or 5.0, 6.0 and 8.0MHz also available). The comprehensive Mission Commander PC NETNode radios employ the unique DTC application. This software suite, based COFDM modulation scheme and therefore around a mapping display, is used to offer excellent RF penetration and configure and monitor the mesh and wider performance in the presence of multipath. DTC systems, and to control its nodes and cameras. Video can be viewed on the PC The NETNode mesh radios can provide up device using the Mission Commander to 8.8Mb/s of IP data (data rate depends on software and recorded using Milestone mode, number of nodes and range between Compatible recorders. nodes). This available bit-rate can be used to exchange IP data traffic between nodes. The information contained in this document is the property of Domo Tactical Communications (DTC) Ltd. This document and the information contained herein is provided for evaluation purposes only and is subject to change without notice. Domo Tactical Communications (DTC) Ltd assumes no responsibility for errors that might appear in this document and gives no representations or warranties as to the accuracy of the information contained herein, including but not limited to the suitability and performances of the product or its intended application. © Copyright Domo Tactical Communications (DTC) Ltd 2016 All Rights Reserved
www.domotactical.com
Domo Tactical Communications (DTC)
NETNode IP Mesh Radio Phase 4 (Robust) – 5W COFDM – Video, Audio Telemetry and IP Products
June 2016 Data Sheet
Tuning step size Output power
1.00 to 1.40GHz, 1.65 to 1.9GHz, 2.00 to 2.50GHz, 4.40 to 5.00GHz, 125kHz step +37 to 10dBm in 0.25dB steps
Bandwidth Mesh capacity Modulation Carrier Modulation FEC rate Receive diversity Receive sensitivity
2.5, 3.0, 3.5, 5.0, 6.0, 8.0MHz Up to 8.8Mb/s Phase 4 COFDM 360 carrier modulation QPSK/16QAM (adaptive) FEC1/2 Maximum Ratio Combining -98dBm for most robust mode
IP interface Primary and secondary Ethernet electrical 100BaseT Ethernet IP address allocation DHCP dynamic IP addressing/Static IP Video and audio Multicast VLC compatible streaming format RTSP Support
Specification: Interfaces RF Interfaces (Antenna 1 ,2 and 3) Power and Ethernet Control and misc I/O Camera (A/V)
N-Type (2 x RX, 1 x TX) Amphenol 38999 Series 3 Amphenol 38999 Series 3 Amphenol 38999 Series 3
Typical range NETNode5W-4R-XXXXXX Line of Sight Light urban 60KM5KM RF Interfaces Antenna 1 Antenna 2 Antenna 3
Switched transmit antenna Receive only antenna Receive only antenna
RF and modulation Output frequency
340 to 470MHz,
A/V input option Video input Composite or SDI (selectable) Video format 525 or 625 (PAL or NTSC) Video encoding MPEG4 Quality User selectable quality level Video bit-rate 2.4Mb/s to 50kb/s (variable) Resolution 704, 576, 480, 352 or SIF (1/4 Resolution) Frame rate Self-selecting 30 to 2F/s Audio input Line level or microphone level Audio sample frequency 48KHz Audio encoding MPEG audio layer 1 Audio bit-rate 384 to 64kb/s Store and Forward options* Storage format SD card interface (Secure Digital card) Record options Continuous or triggered (Milestone) Files download From web browser interface/RTSP Video and audio clip size 30 seconds Encryption Type
AES128 or AES256 (both optional)
Open Audio comms channel (shared voice channel) Multi-user audio comms channel Interface microphone level/headphone o/p
The information contained in this document is the property of Domo Tactical Communications (DTC) Ltd. This document and the information contained herein is provided for evaluation purposes only and is subject to change without notice. Domo Tactical Communications (DTC) Ltd assumes no responsibility for errors that might appear in this document and gives no representations or warranties as to the accuracy of the information contained herein, including but not limited to the suitability and performances of the product or its intended application. © Copyright Domo Tactical Communications (DTC) Ltd 2016 All Rights Reserved
www.domotactical.com
Domo Tactical Communications (DTC)
NETNode IP Mesh Radio Phase 4 (Robust) – 5W COFDM – Video, Audio Telemetry and IP Products
June 2016 Data Sheet Compression and mute Encryption Type
G726 32kbit audio 8KHz sampling
Local control Remote control
AES128 or AES256 (both optional)
GPS Dedicated GPS interfaceRS232/RS485 Data interface RS232/RS485 data input 1K2 to 115K2 baud switchable (shared with user camera With UDP and TCP routing protocol control) PTZ camera interface (with AVI fitted) User camera type PAL or NTSC User camera control From Mesh Commander PC application using VISCA, PELCOD or PELCOP From any user supplied desk controller Requires RS232/RS485 interface NETNode camera options CAMPTZ long range Pan Tilt Zoom
LEDs power and mesh status Mission Commander PC application Full control of all parameters in a map based application Web Browser control
Physical Sealing IP66 Minimum Dimensions H 260mm, W 160mm, D 60mm Mounting options base unit Tripod mount and through hole screws Mounting options adaptation plate Pole mounting kit Weight 2.56kg Power DC input Power Consumed Output power 5W (+/- 1dB) Environment Temperature range
12-14V 60W +37 to 0dBm in 0.25dB steps
-10 to 50 deg C
Control Note: The above are also available with AVI for Composite Audio, Video Input, or AVIHD for H.264 HD
Product Code: NETNode5W-4R-034047 IP Mesh Node 5W Phase 4 Robust 340-470MHz excl PSU & ANTs NETNode5W-4R-100140 IP Mesh Node 5W Phase 4 Robust 1.00-1.40GHz excl PSU & ANTs NETNode5W-4R-165190 IP Mesh Node 5W Phase 4 Robust 1.65-1.90GHz excl PSU & ANTs NETNode5W-4R-200250 IP Mesh Node 5W Phase 4 Robust 2.00-2.50GHz excl PSU & ANTs NETNode5W-4R-440500 IP Mesh Node 5W Phase 4 Robust 4.40-5.00GHz excl PSU & ANTs
Product Code Includes: CA2580 Power/Ethernet External Screen Cable Assembly 5m CA2581 Control & Data External Screened Cable Assembly 2m CA2585 Microphone/Headphone and Control/Debug External Screened Cable Assembly 1M Accessory Options: NETNode-AVI-UP3R for
Composite Video and Audio input
COFDM IP Mesh Node Robust (factory fit only) CAMPTZ* Pan, Tilt and Zoom camera for NETNode MISCDR (Mission Commander) Control Interface (Levels – Bronze/Silver/Gold)
The information contained in this document is the property of Domo Tactical Communications (DTC) Ltd. This document and the information contained herein is provided for evaluation purposes only and is subject to change without notice. Domo Tactical Communications (DTC) Ltd assumes no responsibility for errors that might appear in this document and gives no representations or warranties as to the accuracy of the information contained herein, including but not limited to the suitability and performances of the product or its intended application. © Copyright Domo Tactical Communications (DTC) Ltd 2016 All Rights Reserved
www.domotactical.com
Licensing Options: AES128NN 128bit AES Encryption AES256NN 256bit AES Encryption Note: AES may be subject to export control
* Items marked with an asterisk (*) will be supported in future releases Products are available to security users in licensed frequency bands. Encryption licences are subject to export control. These products are not approved for use by unlicensed users. Commercial products are available if used in appropriate licensed frequency bands.
DTC - Solent Fusion 2,1100 Parkway Whiteley, Hampshire PO15 7AB, UK T: +44 1489 566 750
DTC - Tampa 3845 Gateway Center Blvd Ste 360 Pinellas Park FL 33782, USA T: +1 727 471 6900
DTC – Randers Haraldsveg 64B DK-8960 Randers SØ Denmark T: +45 8791 8100
DTC - Brazil Av. das Nações Unidas 12551- 17ºandar - Sala 1725 04578-903 São Paulo T: +55 11 3443 7545
The information contained in this document is the property of Domo Tactical Communications (DTC) Ltd. This document and the information contained herein is provided for evaluation purposes only and is subject to change without notice. Domo Tactical Communications (DTC) Ltd assumes no responsibility for errors that might appear in this document and gives no representations or warranties as to the accuracy of the information contained herein, including but not limited to the suitability and performances of the product or its intended application. © Copyright Domo Tactical Communications (DTC) Ltd 2016 All Rights Reserved
www.domotactical.com
