Transcript
NetPower NPM115 15W MidSpan Injector Single Port PoE (IEEE802.3af)
DESCRIPTION The NetPower NPM115 is a 15W single port, Power over Ethernet (PoE) midspan injector designed for access control and security industry applications. The NPM115 provides power and passes data (e.g. video or lock control data) for PoE compliant devices. The NPM115 complies with IEEE802.3af standard and provides up to 15.4W power to PoE compliant Powered Device (PD) such as IP cameras or door control devices. The NPM115 utilizes 24V AC or DC power from LifeSafety Power’s FPO series power systems, or alternatively, from AC power mains through a 24V AC Class 2 wall adapter or exisiting CCTV power source.
BENEFITS ¾¾Operates from low voltage 24V AC or 24V DC input ¾¾Reset feature allows PoE shutdown ¾¾Battery backup capability ¾¾15.4W IEEE 802.3af, Listed to UL294B ¾¾Data rate 10/100 BASE-T compliant
ELECTRICAL RATINGS
¾¾Visual diagnostics by on board LED
Parameter
Rating
Input Voltage
24V AC or 24V DC ± 15%
Input Current
1.4 Amps
Output Voltage
50V DC
¾¾This module may be used to power DC IP cameras, access control door controllers, and other similar PoE equipment
Output Current
300mA
Shutdown Terminals
5 to 24V DC, 10mA max
¾¾Operates off 24V AC or DC input or 120V AC with optional 24V AC wall transformer (24V AC / 40VA typical)
Input Reverse Polarity
Protected
Output Overload
Protected
Output Short-circuit
Protected
Output Over-voltage
Protected
Port Status Indicator
Green LED
Data Cable Length
100m (328 feet) max
Data Rate
10/100 Base - T
Non PoE Device Detection
Detected and Protected
ESD Immunity
8kV
PoE pin Assignment (RJ45)
Positive(VCC+): Pins 4,5 Negative(VCC-): Pins 7,8 Data: Pins 1,2,3,6
FEATURES ¾¾Listed for CCTV, Access Control
-20 to +70 ºC
Operating humidity:
5% to 95% (Non-condensing)
November 2012
Fiberglass PCBs for improved environmental protection
¾¾GreenSmart
RoHS, Lead-free manufacturing compliant
¾¾Ten year warranty
AGENCY LISTINGS USA UL 294B Standards for Access Control System Units, 5th Edition UL Subject 294B Outline of Investigation for Power over Ethernet (PoE) UL/CUL 60950-1 IEEE802.3af CANADA CSA C22.2 No.205-M1983, Signal Equipment RoHS Compliance The product shall be compliant with the European Union's Restriction of Hazardous Substances Directive (RoHS)
Operating Ambient Temperature 0 to 49 ºC, indoor use only Storage temperature
¾¾Reliability+
1/2
www.lifesafetypower.com
NetPower NPM115 PoE MidSpan
Expansion This module is typically part of an existing system or purchased to expand an existing system. Flexibility This module may be used to power DC IP cameras, access control door controllers, and other similar PoE equipment. See the instruction manual or application notes for more information.
GreenSmart All members of the NetPower family are RoHs compliant, leadfree, and meet the latest state, federal and European requirements for energy efficiency.
ORDERING Model No. Order No NPM115 A10-001 NPM115DR (Din Rail) A10-003
Mechanical Information Size: 4.2" x 2.5" x 1.2" Weight: .15 lb. Size: 4.2" x 2.5" x 1.2" Weight: .19 lb.
INSTALLATION DIAGRAM
#6 Diameter 3.85” on Center
Network Data Connection
PoE / Data Output
10/100 Base T Compliant
IEEE 802.3af, 15.5W
Data
PoE/Data
NPM115 NetPower
Port Status
Status Indicator
Single Port 15W MidSpan Injector Input: 24VAC / 24VDC 1.4A max Output: 48VDC 15.4W max per IEEE 802.3af
LED ON:
Output OK
LED OFF:
Non-Powered Device or Port Open
LED FLASH:
Overcurrent 1 Flash - Low Signature 2 Flash - High Signature 5 Flash - Port Overload
24V AC/DC Input
PoE Shutdown
Power Input
PoE Shutdown
Apply a voltage between 9 and 32 Volts AC or DC to these terminals to shutdown PoE output power
24V AC or DC
Important: All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their particular application. LifeSafety Power makes no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. LifeSafety Power’s only obligations are those in the LifeSafety Power Standard Terms and Conditions of Sale for this product, and in no case will LifeSafety Power or its distributors be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the product. Specifications are subject to change without notice. In addition, LifeSafety Power reserves the right to make changes—without notification to Buyer—to processing or materials that do not affect compliance with any applicable specification.
Worldwide Headquarters LifeSafety Power, Inc. 49 Range Road Windham, NH 03087 USA Tel 888-LSP-BUY8
[email protected]
November 2012
2/2
www.lifesafetypower.com
© 2012 LifeSafety Power Inc. P01-269A 11/12
Reliability+ All boards within the NetPower system feature fiberglass PC boards to protect the electronics from water, dust, and other corrosive elements found in industrial settings.
LifeSafety Power, FlexPower, DataLink, GreenSmart, FlexConnect, PowerCom, Reliability+, SureCharge, TruWatt, and VSelect are trademarks of LifeSafety Power Inc. or its affiliates.
NETPOWER FEATURES
