Transcript
Network Solutions
10/100 to 100BaseFX SC Multimode Unmanaged Industrial DIN-rail Mount Switch
Signamax’ 065-7403HTB 3-Port 10/100 to 100BaseFX SC Multimode Unmanaged Industrial DIN-rail Mount Switch has been developed to operate in harsh industrial environments that require ruggedized equipment that can operate in severe temperature extremes. This switch is an affordable solution for outdoor environments, transportation roadside systems, shop floors, and other harsh environments where consistent operation at temperature extremes of -40°F to 167°F (-40°C to 75°C) is necessary. It can also be used as a media converter where two twisted-pair ports must be fed by a single 100BaseFX SC multimode fiber connection. This unmanaged switch is a compact, plug-and-play device with an IP30 metal case, which does not require complex user setup.
KEY FEATURES • Meets EN 61000 series standards for Industrial Environment. • Usable as a hardened multi-port media converter. • 10/100 Mbps – Full/Half Duplex, Auto-Negotiation, Auto-MDIX. • 1024 MAC Addresses, Full Wire-Speed Performance. • Redundant 24 V DC Terminal Block Power Inputs. (120-240V AC hardened external power supply sold separately.) • Supports DIN-rail installations.
ORDERING INFORMATION PART NUMBER
DESCRIPTION
065-7403HTB
Unmanaged Industrial Switch with 2 10/100BaseT/TX ports plus 1 100BaseFX SC Multimode port, 24 V DC Redundant Power Terminal Block
www.signamax.com 999 N.W. 159th Drive • Miami, FL 33169 • 800.446.2377 • 305.944.7710 • Fax: 305.949.4483 Copyright 2015 Signamax, Inc./AESP, Inc. All rights reserved • Signamax Connectivity Systems is a trademark of AESP, Inc. • Specifications subject to change. 0657403HTB 03122015
Network Solutions
SPECIFICATIONS • APPLICABLE STANDARDS IEEE802.3 10BaseT IEEE802.3u 100BaseTX / 100BaseFX IEEE802.3x Flow Control and Back pressure • FIXED PORTS 2 -- 10/100BaseT/TX auto-negotiating Auto-MDIX ports, plus 1 100BaseFX port, with SC multimode connector, 2 km span. • LED STATUS INDICATORS Per Switch: Power Status (amber) Per 10/100BaseT/TX Port: Link/Activity (amber), 100 Mbps speed (green) 100BaseFX Port: Link/Activity (green) • PERFORMANCE Latency: <7.1 µs (LIFO). Throughput: 14,880 pps for 10 Mbps, 148,800 pps for 100 Mbps (64-byte packets) Switch Fabric Speed: 4.0 Mbps (non-blocking, wire speed performance) MAC Address Capacity: 1024 MAC addresses Switch Architecture: Store and Forward • POWER INPUT REQUIREMENTS Redundant 12 to 36 Volts DC Terminal Block. Optional hardened power supply sold separately. • POWER CONSUMPTION: 24 V DC @ 0.1 A; 2.4 Watts Maximum. • INSTALLATION Included pre-attached DIN-rail mount. • ENVIRONMENTAL CHARACTERISTICS Operating Temperature: -40°F to 167°F (-40°C to 75°C) Storage Temperature: -40°F to 185°F (-40°C to 85°C) Operating Humidity: 5 to 95% (non-condensing) • PHYSICAL CHARACTERISTICS Dimensions: 1.58 in. x 3.03 in. x 3.82 in., W x D x H (40 mm x 77 mm x 97 mm) Weight: 0.572 lb (260 g.) Housing: IP30 protection, metal case • CERTIFICATIONS EMI： ：FCC Part 15 Subpart B Class A，EN 55022 Class A EMISSIONS： ： EN 61000-4-2 (ESD) Grade 3，EN 61000-4-3 (RS) Grade 3， EN 61000-4-4 (EFT) Grade 3，EN 61000-4-5 (Surge) Grade 3， EN 61000-4-6 (CS) Grade 3，EN 61000-4-8 Grade 3 Impact： ：IEC 60068-2-27 Freefall： ：IEC 60068-2-32 • SAFETY UL 60950-1 • WARRANTY Five years
www.signamax.com 999 N.W. 159th Drive • Miami, FL 33169 • 800.446.2377 • 305.944.7710 • Fax: 305.949.4483 Copyright 2015 Signamax, Inc./AESP, Inc. All rights reserved • Signamax Connectivity Systems is a trademark of AESP, Inc. • Specifications subject to change. 0657403HTB 03122015
