New Built-in Model Bi-48s Side-by-side

Transcript

New Built-In Model BI-48S Side-by-Side Side-by-side Model BI-48S provides the highest refrigerator and freezer capacity in a single Built-In unit. Sub-Zero dual refrigeration along with new air purification and water filtration systems guard the freshness of your food and water like nothing before. Framed, overlay/flush inset and stainless steel models are available. A new flush inset installation option allows the unit to sit flush with surrounding cabinetry. Stainless steel Model BI-48S shown with tubular handles. Features Model Options Framed, overlay/flush inset and stainless steel design applications BI-48S/F BI-48S/O BI-48S/S/TH BI-48S/S/PH BI-48S/S/CH Framed Overlay/Flush Inset Stainless Stainless Stainless Louvered Panel Stainless Stainless Stainless Full-Length * Tubular Pro Curved Design Grille Flush inset installation option allows unit to sit flush with surrounding cabinetry Handle Air purification system *Handle not included to allow for design flexibility. Water filtration system Dual refrigeration system Flip-up grille for easy access to condenser Evenly-distributed bright interior lighting Door shelves are adjustable in one-inch increments Crisper and deli drawers form a special low-temperature zone Informational freshness cards inside unit Max ice feature to increase rate of ice production for a 24-hour period Exceeds tough Department of Energy standards This appliance is certified by Star-K to meet strict religious regulations in conjunction with specific instructions found on www.star-k.org. Flip-Up Grille Air Purification System Interior Features Refrigerator 18.8 cu ft Capacity Air Purification System 4 Adjustable Glass Shelves 1 Stationary Glass Shelf 1 High-Humidity Drawer with Divider 2 Storage Drawers with Divider 3 Adjustable Door Shelves 2 Stationary Door Shelves Adjustable Dairy Compartment Freezer 9.5 cu ft Capacity Water Filtration System Automatic Ice Maker 3 Adjustable Wire Shelves 1 Stationary Solid Shelf 3 Storage Drawers 5 Adjustable Door Shelves Accessories Louvered, panel and stainless steel grilles for 83", 84" and 88" finished heights Stainless steel front panels for framed and flush inset applications with stainless steel finish and handle options Side panels in classic stainless steel and white Stainless steel tubular, pro or curved handles and full-length extended handles Dozen egg container with lid 90° door stop kit Accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit the Showroom Locator section of our website, subzero.com. Built-In Model BI-48S Installation Specifications Standard Installation *ANTI-TIP BRACKET MUST NOT TOP VIEW 1/2" (13) INTERFERE WITH WATER LINE. Overall Dimensions 6" 18" (457)* REFER TOnot INSTALLATION *Anti-tip bracket must interfere INSTRUCTIONS FOR COMPLETE with water line.DETAILS. Extend water line approximately EXTEND 36" from back wall. WATER LINE APPROX 24" (610) OPENING DEPTH 36" (914) FROM BACK WALL. Dimensions in parentheses are in millimeters unless otherwise specified. (152) WATER LINE OUTLINE OF FRAMED, OVERLAY OR STAINLESS STEEL MODEL SHUT-OFF VALVE 84" 7" (2134) (178) LOCATE ELECTRICAL WITHIN SHADED AREA 24" (610) OPENING DEPTH E 6" (152) 47 1/2" (1206) OPENING WIDTH 48" 24" (1219) (610) 75 1/2" 83 3/4" (2127) OPENING HEIGHT (1918) 47 1/4" (1200) 23 7/8" (606) BEHIND FRAME LOCATE WATER SUPPLY WITHIN SHADED AREA 30" (762) Unit dimensions may vary by ± 1/8" (3). 48" (1219) 18" 6" (457) (152) 3" (76) SIDE VIEW W FRONT VIEW 6" 18" (457)* Specifications Overall Dimensions Flush Inset *ANTI-TIP Installation BRACKET MUST NOT 48"W x 84"H x 24"D Door Clearance 30" Opening Width Flush Inset Width 47 1/2" 50" Opening Height Flush Inset Height 83 3/4" 84" Opening Depth Flush Inset Depth 24" 26 3/16" Electrical Requirements Plumbing Requirements 115 V AC, 60 Hz 15 amp circuit 1/ 4" OD copper line 30–100 psi TOP VIEW 1/2" (13) INTERFERE WITH WATER LINE. REFER TOnot INSTALLATION *Anti-tip bracket must interfere INSTRUCTIONS FOR COMPLETE with water line.DETAILS. Extend water line approximately **ASSUMES 36" from 3back /4" (19)wall. PANEL 24" (610) OPENING DEPTH THICKNESS. 3/4" (19) **Dimensions based EXTEND on WATER LINE APPROX 36" (914) FROM BACK WALL. panels. 1/4" (6) 24" (610) OPENING DEPTH 582–630 lbs WATER LINE 26 3/16" OUTLINE OF FLUSH INSET APPLICATION WITH 3/4" (19) PANEL SHUT-OFF VALVE 7" LOCATE (178) ELECTRICAL WITHIN SHADED AREA 2 3/16" (56)** E 6" (152) FLUSH INSET DETAIL 26 3/16" (665) FLUSH INSET DEPTH 1/4" (6) 2 3/16" 83 3/4" (2127) OPENING HEIGHT (665) FLUSH INSET DEPTH 2 3/16" (56)** (56) Shipping Weight (152) 24" (610) OPENING DEPTH 84" 75 1/2" (1918) (2134) FLUSH INSET HEIGHT 11/4" (32) Installation Notes Built-In models may be used in a standard installation or in a flush inset installation which allows the unit to be flush with surrounding cabinetry. 47 1/2" (1206) OPENING WIDTH 11/4" 11/4" (32) (32) 50" (1270) FLUSH INSET WIDTH Complete installation specifications, including panel sizes, can be found on our website, subzero.com. LOCATE WATER SUPPLY WITHIN SHADED AREA 3" (76) SIDE VIEW 18" 6" (457) (152) W FRONT VIEW