Transcript
PRODUCT CATALOG
Edition 2.1 2016
LPG/Propane & Cutting Fuels
Industrial & Welding
Medical
Beverage
SCBA & Life Safety
Services
INTRODUCTION TABLE OF CONTENTS
SUMMARY Table of Contents.................................................................................2 Company Overview............................................................................3 Chart: CGA Selection by Gas Service............................................4 LPG/PROPANE & PROPYLENE ................................................5–17 LPG/Propane Cylinders.............................................................. 6–7 Propylene Cylinders...........................................................................8 Valves & Components................................................................9–16 Replacement Parts...........................................................................17 INDUSTRIAL & WELDING....................................................... 18–53 Cylinders......................................................................................20–28 High Pressure Aluminum.......................................................20 High Pressure Steel..........................................................21–22 Breathing Air..............................................................................23 Acetylene.....................................................................................24 CO2........................................................................................25–26 Cryogenic Liquid & Dewars..................................................27 Propylene.....................................................................................28 Valves............................................................................................29–41 Chart: Valve Part Number Designation.......................................29 Acetylene.............................................................................30–31 Breathing Air..............................................................................32 CO2................................................................................................33 Cryogenic.....................................................................................34 HVAC.............................................................................................34 Hydrogen .....................................................................................35 Industrial......................................................................................36 Inert Gases...................................................................................37 Medical Mix & Post Valves (see Medical Section)..........58–59 Nitrous Oxide.............................................................................38 Oxygen Service Valves............................................................39 Propylene (see LPG Section).........................................................15 RPV Valves...................................................................................40 Sulfur Hex....................................................................................40 Refrigerant..................................................................................41
2
TABLE OF CONTENTS
Click on a listing to go to that section or page.
INDUSTRIAL & WELDING (continued) Regulators...................................................................................42–44 CO2................................................................................................42 Medical Oxygen (See Medical Section)...............................60–61 Nitrogen.......................................................................................42 Parts & Assemblies...................................................................43 HVAC , Welding & Oxygen....................................................44 O-Rings, Safeties & Valve Replacement Parts..............45–50 O-Rings.........................................................................................45 Replacement Parts...........................................................46–48 Carry Handles............................................................................49 Chart: Safeties (PRD) Selection......................................................50 Chart: ISO vs. DOT High Pressure Cylinders......................51–53 MEDICAL....................................................................................... 54–61 Cylinders......................................................................................56–57 Valves, Post Valves & Cylinder Carts................................57–59 Medical Regulators..................................................................60–61 BEVERAGE.................................................................................... 62–81 Kegs................................................................................................62–66 Ball Lock & Pin Lock.........................................................63–65 Sankey & Pumps................................................................66–67 CO2 & Nitrogen/Beer Mix Cylinders...............................68–69 Beverage Regulators.......................................................................70 Keg Components & Parts......................................................71–77 Brewing Equipment.................................................................78–81 Brewing Kettles & Pots..................................................................81 Kegging Kits.................................................................................82-83 SCBA & LIFE SAFETY................................................................ 84–88 SCBA Cylinders.................................................................................85 SCBA Valves.......................................................................................86 Fire Extinguishers.....................................................................87–88 SERVICES...................................................................................... 89–91 Propane/LPG Cylinders & Services...........................................90 Cylinder Recertification & Recycling........................................91 TERMS AND CONDITIONS.................................................... 92–95
[email protected] / 866-958-3473
INTRODUCTION OVERVIEW
Benefits of Working with All Safe Global 1. Exclusive product lines and unique product combinations 2. Quick order turnaround 3. Cost advantages through volume purchasing power and valuedriven supply chain 4. Global fulfillment capability 5. Unique product knowledge and application-driven technical support
Products & Services
Company Overview All Safe Global, Inc. is a Minneapolis, MN-based master distributor of equipment and accessories for compressed gas delivery, beverage production, and fire suppression. The company provides a broad selection of services and hard goods to multiple end-use gas markets. All Safe Global, Inc. has been serving U.S. and select international markets since 1976. The company is a leading, nationally recognized DOT test facility and compressed gas equipment supplier, with a robust combination of service capabilities and a large inventory for rapid order fulfillment and quick turnaround. The company’s mission is to be the premier provider of valuedriven, high-quality gas and liquid delivery solutions by excelling at global sourcing, fulfillment, and customer service. All Safe Global pledges to provide customers with a competitive advantage through its large-scale operations, distinctive products and services, and extensive supply chain.
3
OVERVIEW
The company offers highly competitive products and services across a broad range of markets. Primary products include a wide selection of cylinders, valves, O-Rings, beer kegging and brewing equipment, fire suppression equipment, breathing air, and parts for compressed gas applications, including high-pressure welding, beer and beverage, medical and specialty, and low-pressure refrigerant and propane. Services include DOTauthorized hydrostatic cylinder recertification, refurbishing, recycling, and disposal. Financing assistance is also available. Before using this catalog, please refer to the safety information located in the back of the catalog.
Website: www.allsafe.net Toll Free: 866-958-3473 Fax: 651-408-7163
[email protected] / 866-958-3473
INTRODUCTION
CGA – GAS SELECTION CHART FOR FITTINGS
4
PURE GASES
MIXED GASES
CGA Fittings Pure Gases 510/300 Acetylene 590/346/347/702 Air 240/660/705 Ammonia 580/680/677 Argon 350 Arsine 320 Carbon Dioxide 350 Carbon Monoxide 660 Chlorine 510 Cyclopropane 350 Deuterium 350 Ethane 350 Ethylene 510 Ethylene Oxide 580/680/677 Helium 350/695/703 Hydrogen 330 Hydrogen Chloride 330 Hydrogen Sulfide Krypton, KR-85 580 350/695/703 Methane 510 Methyl Chloride 580/680/677 Neon 580/680/677 Nitrogen 326 Nitrous Oxide 540/577/701 Oxygen 350 Phosphine Propane 510 350 Silane 668/660 Sulfur Dioxide 590 Sulfur Hexaflouride 580/680/677 Xenon
CGA Fittings Minor Component 240/660/705 Ammonia 350 Butane 296 Carbon Dioxide 580 Carbon Dioxide 580 Carbon Dioxide and/or Nitrogen 330 Chlorine 350 Diborane 580 Freon-12 296 Helium 350 Hexane 350 Isobutane 350 Krypton-85 330 Krypton-85 540 Krypton-85 Moisture 580 660 Nitric Oxide 660 Nitrogen Dioxide 590 Nitrous Oxide 590 Oxygen 350 Propane* 660 Sulfur Dioxide Sulfur Hexaflouride 590 Sulfur Hexaflouride 350 350 Tritium
CGA – GAS SELECTION CHART FOR FITTINGS
MEDICAL GASES Major Component Nitrogen Nitrogen Oxygen Helium or Nitrogen Helium Nitrogen Argon, Helium, Hydrogen, or Nitrogen Nitrogen Oxygen Nitrogen Nitrogen Carbon Monoxide, Hydrogen, or Methane Chlorine Oxygen Argon, Helium, or Nitrogen Nitrogen Air or Nitrogen Nitrogen Nitrogen or Helium Nitrogen or Helium Air or Nitrogen Argon, Helium, or Nitrogen Hydrogen Argon, Carbon Dioxide, Hydrogen, Methane, Neon, Nitrogen, Krypton, or Xenon
CGA Fittings Gas Type 870 Oxygen 940 CO2 930 Inert / Nitrogen 960 Inert / Nitrogen 910 Nitrous Oxide 950 Breathing Air 965 Medical Gas Mixtures 973 Medical Gas Mixtures
It is the user’s responsibility to familiarize him/herself with the specific properties and dangers of the gases used for their application. The valve outlet to be used with a cylinder for a particular use is specified by the Compressed Gas Association (CGA). CGA specifications can be found in the document published by the CGA entitled “CGA STANDARD V-1, Compressed Gas Cylinder Valve Outlet Connections." These specifications have been adopted to prevent the inadvertent mixing and/or improper use of gases that could be dangerous. The chart described here is a reference tool only. Consult your gas supplier or the CGA to determine the actual valve type and CGA connection required for your application. Compressed gas cylinders, valves, and the gases contained in them are dangerous and should only be handled by qualified individuals.
[email protected] / 866-958-3473
LPG/PROPANE & PROPYLENE All Safe Global provides a premier line of low-pressure gas cylinders. Available in capacities from 4 to 420 lbs., our aluminum and steel cylinders are ideal for commercial and industrial applications as well as recreational and domestic use. LPG/Propane and Cutting Fuel/Propylene Cylinders • Transport Ready: All cylinders strictly conform to Department of Transportation (DOT) specifications 4BA, 4BW, and 4E. Most also conform to and are approved under Transport Canada (TC) specifications 4BAM, 4BWM, and 4EM.
LPG/Propane and Cutting Fuel/Propylene Valves and Components All Safe Global also provides a range of LPG and cutting fuel gas valves and system elements engineered to precisely meet the needs of commercial, industrial, and residential users.
• Tested Safe: All cylinders undergo and pass rigorous strength and integrity tests, and meet or exceed all industry quality and safety requirements.
We offer a complete array of valves, including service, multi-purpose, fill, liquid withdrawal, OPD, and relief valves. Valves are available in various outlet styles and bonnet assemblies.
• Fully Protected: Cylinders are shot-blasted and powder-coated, for maximum durability and corrosion protection.
To keep you up and running, we also carry a full line of system repair and improvement items, including high-quality forklift gas system components, cylinder gauges, and cylinder and gauge replacement parts.
• All cylinders are manufactured in state-of-the-art facilities. • Capacity gauges available on 20, 30, 40, 43, 200, and 420 lb. cylinders • Horizontal cylinders available • Contact us for current cylinder availability
5
LPG/PROPANE & PROPYLENE
[email protected] / 866-958-3473
LPG/PROPANE & PROPYLENE CYLINDERS
CGA Fitting by Gas Service see page 4
LPG/PROPANE CYLINDERS Size
Description
Part Number
4.25 lb.
Steel LPG Cylinder with OPD Valve
4LBLPG
5 lb.
Steel LPG Cylinder with OPD Valve
CYL-LP-05NS
10 lb.
Steel LPG Cylinder with OPD Valve
CYL-LP-10NS
11 lb.
Steel LPG Cylinder with OPD Valve
11LBLPG
20 lb.
Steel LPG Cylinder with OPD Valve
20LBLPG
20 lb.
Aluminum LPG Buffer Cylinder Pack with OPD Valve
20LBLP-Buffer
20 lb.
Aluminum LPG Buffer Cylinder - No OPD - Filler Valve, Gauge, & Coupler
CYL-LP-AL-20NS-B
30 lb.
Steel LPG Cylinder with OPD Valve
30LBLPG
33.5 lb.
Aluminum Forklift Cylinder, Fixed-Liquid-Level, Relief, Gauge, Service Valve, & Quick Fill
335ALUMFLQF
33.5 lb.
Aluminum Forklift Cylinder, Fixed-Liquid-Level, Relief, Gauge, Service Valve, NO Quick Fill
335ALUMFL
33.5 lb.
Steel Forklift Cylinder, Fixed-Liquid-Level, Relief, Gauge, Service Valve, NO Quick Fill
335STEELFL
4LBLPG
6
LPG/PROPANE CYLINDERS
20LBLPG
30LBLPG
335ALUMFLQF
335STEELFL
[email protected] / 866-958-3473
LPG/PROPANE & PROPYLENE CYLINDERS
LPG /PROPANE CYLINDERS Size
Description
Part Number
40 lb.
Steel LPG Cylinder with OPD Valve
40LBLPG
43 lb.
Steel LPG Cylinder with 510 POL Valve
CYL-LP-43NS-W
43.5 lb.
Aluminum Forklift Cylinder, Fixed-Liquid-Level, Relief, Gauge, Service Valve, & Quick Fill
435ALUMFLQF
60 lb.
Steel LPG Cylinder with POL Valve
60LBLPG
100 lb.
Steel LPG Cylinder with 10% Valve & Collar
100LBLPG
100 lb.
Steel LPG Cylinders with 10% POL Valve, Cap & Flange
100LBLPG-CAP
100 lb.
Steel LPG Cylinder with POL Multi Valve
100LBLPG-MULTI
100 lb.
Steel LPG Cylinder with Multi-Vapor Fill Valve & ASME
100LBLPG-MULTI-ASME
40LBLPG
7
LPG/PROPANE CYLINDERS
60LBLPG
100LBLPG
[email protected] / 866-958-3473
LPG/PROPANE & PROPYLENE CYLINDERS
STEEL PROPYLENE CYLINDERS Size
Description
Part Number
25.5 lb.
260 PSI with 10% POL Valve – Cutting Fuel/Propylene
25.5LB260PSIVLV
60 lb.
260 PSI with 10% POL Valve – Cutting Fuel/Propylene
60LB260PSIVLV
100 lb.
260 PSI with 10% POL Valve – Cutting Fuel/Propylene
100LB260PSIVLV
Acetylene cylinder selection can be found in the Industrial & Welding section – page 24.
25.5LB260PSIVLV
8
STEEL PROPYLENE CYLINDERS
60LB260PSIVLV
100LB260PSIVLV
[email protected] / 866-958-3473
LPG/PROPANE & PROPYLENE VALVES & COMPONENTS
CGA Fitting by Gas Service see page 4
LPG/PROPANE – OPD VALVES Type
Description
Part Number
OPD Valve
20 lb. OPD 3/4" NGT Inlet – FPOL & 1 5/16" ACME Outlet – 4.0” Dip Tube – Type I
ROPD20DT4.0
OPD Valve
30 lb. OPD 3/4" NGT Inlet – FPOL & 1 5/16" ACME Outlet – 4.7" Dip Tube
ROPD30DT4.7
OPD Valve
40 lb. OPD 3/4" NGT Inlet – FPOL & 1 5/16" ACME Outlet – 6.4" Dip Tube
ROPD40DT64
OPD Valve
40 lb. OPD 3/4" NGT Inlet – FPOL & 1 5/16" ACME Outlet – 7.0" Dip Tube
ROPD40DT70
Gauge
LP Gauge & Clip for 20 lb. OPD Valve
LP-GCLIP
ROPD20DT4.0
9
LPG/PROPANE – OPD VALVES
ROPD30DT4.7
[email protected] / 866-958-3473
LPG/PROPANE & PROPYLENE VALVES & COMPONENTS
LPG/PROPANE – POL VALVES Type
Description
Part Number
POL Valve
50 lb. POL 3/4" NGT Inlet – 375 PSI Relief
RPOL50
POL Valve
100 lb. POL 3/4" NGT Inlet – 375 PSI Relief – No Dip Tube
RPOL100NODT
POL Valve
100 lb. POL 3/4" NGT Inlet – 375 PSI Relief – 10.2" Dip Tube
RPOL100DT102
POL Valve
POL (CGA 510) 3/4" NGT Inlet – No PRD – No Dip Tube
RPOLNOPRD
LPG/PROPANE – ASME RELIEF Type
Description
Part Number
Relief Valve
1 1/4" NPT ASME – 1000 Gallon
RELIEF1000
Relief Valve
1" NPT ASME – 500 Gallon
RELIEF500
Relief Valve
3/4" NPT ASME – 250 Gallon
RELIEF250
RPOL100DT102
10
LPG/PROPANE – POL VALVES & ASME RELIEF
RELIEF1000
[email protected] / 866-958-3473
LPG/PROPANE & PROPYLENE VALVES & COMPONENTS
PROPANE – ASME FLOAT GAUGES Type
Description
Part Number
Float Gauge
Senior Flange 30" – 420 lb. Vertical
RBTGAUGESR-420
Float Gauge
Senior Flange 30" – 250 Gallon Horizontal
RBTGAUGESR250H
Float Gauge
Senior Flange 37" – 500 Gallon
RBTGAUGESR500
Float Gauge
Senior Flange 41" – 1000 Gallon
RBTGAUGESR1000
Float Gauge
Junior Flange – 420 lb. Vertical
RBTGAUGE420VERT-RO
Float Gauge
Junior Flange 30" – 250 Gallon Horizontal
RBTGAUGEJR250H
Float Gauge
Junior Flange 37" – 500 Gallon
RBTGAUGEJR500
Float Gauge
Junior Flange 41" – 1000 Gallon
RBTGAUGEJR1000
Float Gauge
Junior Flange 48" – Horizontal
RBTGAUGEJR-48H
RBTGAUGESR1000
11
PROPANE – ASME FLOAT GAUGES
RBTGAUGEJR500
[email protected] / 866-958-3473
LPG/PROPANE & PROPYLENE VALVES & COMPONENTS
PROPANE – ASME FLOAT GAUGES Type
Description
Part Number
Float Gauge
3/4" Threaded 41" – Horizontal
RBTGAUGE-0.750-41H
Float Gauge
1" Threaded 19" – Vertical
RBTGAUGE-1.0-19V
Float Gauge
1" Threaded 24" – Horizontal
RBTGAUGE-1.0-24H
Float Gauge
1" Threaded 24" – 200 lb. Vertical
RBTGAUGE-1.0-24V
Float Gauge
1" Threaded 30" – 420 lb. Vertical with OUT Thread Sealant
RBTGAUGE420VERT-NOS
Float Gauge
1" Threaded 30" – 420 lb. Vertical with Thread Sealant
RBTGAUGE420VERT
Float Gauge
1" Threaded 30" – 250 Gallon Horizontal
RBTGAUGE1INCH250H
Float Gauge
1" Threaded 37" – 500 Gallon
RBTGAUGE1INCH500
Float Gauge
1" Threaded 41" – 1000 Gallon
RBTGAUGE1INCH1000
Float Gauge
1 1/4" Threaded – 420 lb. Vertical
RBTGAUGE420VERT-RO
Float Gauge
1 1/4" Threaded 30" – 250 Gallon Horizontal
RBTGAUGE1.25INCH250H
Float Gauge
1 1/4" Threaded 37" – 500 Gallon
RBTGAUGE1.25INCH500
Float Gauge
1 1/4" Threaded 41" – 1000 Gallon
RBTGAUGE1.25INCH1000
RBTGAUGE1INCH250H
12
PROPANE – ASME FLOAT GAUGES
[email protected] / 866-958-3473
LPG/PROPANE & PROPYLENE VALVES & COMPONENTS
FORKLIFT – VALVES & COMPONENTS Type
Description
Part Number
ASME Cap
Black Cap Cover for 3/4" LPG ASME Relief
CAPCOVER-LP-34
Dust Cap
Black Rubber Dust Cap – 20 lb. Cylinder Compatible
QCCCAP
Female Adapter
Forklift Female Adapter
SFLFEMADT
Fixed Liquid
Fixed Liquid Level Gauge – 1/4" NPT 5.6 DT
RFLFIXEDLIQGAUGE
Fixed Liquid
Fixed Liquid Level Gauge – No DT
SFLFIXLIQGANODT
Gasket
Flat Gasket External FL Male Adapt
FLGASKETEXT
Gauge
33.5 lb. 3/4" Universal Forklift Gauge
RFLGAUGE333/4NGT
Gauge
33.5 lb. 1 1/4" Universal Forklift Gauge
RFLGAUGE125
Gauge
43.5 lb. Brass Forklift Gauge 3/4"
RFLGAUGE43-3/4NGT
Gauge
33.5 lb. Junior Flange Forklift Gauge – 4 Bolt
RFLGAUGEJunior
Gauge Dial
FL Gauge Dial Universal – 2 Tab Bolt Fasten
FLDIAL51992
Gauge Dial
FL Gauge Dial – 4 Tab Clip-On
FLDIAL52591
Gauge Dial
FL Gauge Dial – Flat Bottom
FLDIAL2733U
SFLFILL
13
RFLFIXEDLIQGAUGE
FORKLIFT – VALVES & COMPONENTS
FLDIAL51992
FLDIAL52591
[email protected] / 866-958-3473
LPG/PROPANE & PROPYLENE VALVES & COMPONENTS
FORKLIFT – VALVES & COMPONENTS Type
Description
Part Number
Hex Plug
3/4" Hex Plug Class 300
HEXPLUG075300
Hex Plug
1 1/4" Hex Plug Class 300
HEXPLUG125300
Label
UN1075 Propane Label – Flammable
LABELUN1075
Male Adapter
Male Adapter – 3/8" 1.25 ACME
SFLMALEADT
O-Ring
O-Ring Internal FL Male Adapt
FLORINGINT
Pipe Away
45 Degree Forklift Pipe Away
PIPEAWAY45
Pipe Away
Pipe Away Plastic Cover
PIPEAWAYCOVER
Relief Device
3/4” NPT 375 PSI Relief Device
SFLRELIEF
Vapor Valve
3/4" Inlet Vapor Relief/Equalizing Valve 1 1/4" ACME Outlet
EQ125ACME
Service Valve
3/4" NGT X 3/8" NPT – Small Body
SFLSERSM
Service Valve
3/4" NGT X 3/8" NPT – Large Body
SFLSERLG
SFLSERLG
14
FORKLIFT – VALVES & COMPONENTS
SFLSERSM
SFLRELIEF
[email protected] / 866-958-3473
LPG/PROPANE & PROPYLENE VALVES & COMPONENTS
LPG 420 LB. VERTICAL & 250 GALLON HORIZONTAL FITTINGS
Type
Description
Part Number
Relief Valve
Relief Valve 420 lb. 1" NGT inlet
RLF-420-1
Vapor Service Valve
3/4" Valve Inlet – POL/510 Outlet No DT
RPOL-420NODT
Vapor Service Valve
3/4" Valve Inlet – POL/510 outlet DT7 no PRD
RPOL-420DT7NOPRD
Vapor Service Valve
3/4" Valve Inlet – POL/510 outlet DT 11, 11.1, 11.7 avail no PRD
RPOL-420DTXX-NOPRD
Vapor Service Valve
3/4” Vapor Service Valve Inlet – POL/510 outlet 5.9 DT
RPOL-420DT5.9
Vapor Service Valve
3/4” Vapor Service Valve Inlet – POL/510 outlet 11.1 DT
RPOL-420DT11.1
Fill Valve
Fill Valve – See 1 1/4" or 3/4" FL Fill Valve
Call
Type
Description
Part Number
FPOL Valve
CGA510 FPOL 3/4" 435 PSI 100 lbs. PROPYLENE DT11.6
RFPOL-435-11.6
FPOL Valve
CGA510 FPOL 3/4" 435 PSI 100 lbs. PROPYLENE no DT
RFPOL-435-NODT
FPOL Valve
CGA510 FPOL 3/4" 420 PSI 100 lbs. PROPYLENE no DT
RFPOL-420-NODT
FPOL Valve
LP & Propylene Liquid Withdrawal Valve 100 lb. 3/4" (POL Available)
RFPOL-100-LW
PROPYLENE VALVES
RPOL-420
15
LPG VERTICAL & HORIZONTAL – PROPYLENE VALVES
Acetylene Valve Section see pages 30–31.
[email protected] / 866-958-3473
LPG/PROPANE & PROPYLENE VALVES & COMPONENTS
PROPANE – MULTI & LIQUID WITHDRAWAL VALVES Type
Description
Part Number
Liquid Withdrawal
LP 100 lb. – 555 Liquid Withdrawal Valve with ET (Expulsion Tube) – 11.6 DT
555LIQETDT116
Multi Valve
3/4" Inlet POL Outlet Up To 200 lb. (DOT) – 11.6DT; Vapor Outlet
SPOLMULTI100-200-11.6
Multi Valve
1" INLET POL OUTLET Up To 420 lb. (DOT) 11.1DT
RPOL4832011004DT111
Relief Valve
1" – 375 PSI – 420 lb.
RLF-375-420
Plug
POL Plug Yellow
POL-PLUG
Liquid Withdrawal
Liquid Withdrawal – Excess Flow Valve 3/4" Inlet
SBTLIQWITH34
Liquid Withdrawal
Liquid Withdrawal – Excess Flow Valve 1 1/4" Inlet
SBTLIQWITH114
Fill Valve
ASME Double Back Check Fill Valve 1 1/4" NPT Inlet 1 3/4" ACME Out with Cap
SBTFILLVALVE
Fill Valve
Double Back Check Fill Valve – 3/4” NPT 1 3/4” ACME – Cap & Strap
SFLFILL
Multi Valve
ASME Valve 3/4" Inlet POL-Outlet Multi Valve No Relief
RBTMULTI4831001001
Multi Valve
ASME Valve 3/4" Inlet POL-Outlet Multi Valve No Relief – Dual Bonnet
RBTMULTI-NR-DB
Cluster Valve
ASME Underground Cluster Valve
ASME-CLUST1
Cluster Valve
ASME Underground Cluster Valve with Liquid Withdrawal
ASME-CLUST2-LW
Vapor Valve
ASME Vapor Equalizing Valve 3/4" Inlet 1 1/4-5 ACME Outlet
ASME4820111001Fill Valve
SPOLMULTI100-200-11.6
16
PROPANE – MULTI & LIQUID WITHDRAWAL VALVES
RBTMULTI4831001001
[email protected] / 866-958-3473
LPG/PROPANE & PROPYLENE REPLACEMENT PARTS
REPLACEMENT PARTS
17
Type
Description
Part Number
Dial
ASME Dial Gauge Replacement 5-95%
RBTDIAL5-95
Dial
ASME Dial Gauge Replacement 10-80%
RBTDIAL10-80
Dial
ASME Senior Flange Dial Gauge Replacement
RBTDIAL-SR
Gasket
Junior Flange Gasket
JRFLANGEGASKET
Screw
Junior Flange Screw
JRFLANGESCREW
Gasket
Senior Flange Gasket
SRFLANGEGASKET
Screw
Senior Flange Screw
SRFLANGESCREW
Screw
Senior Bolts 5/16-24 x 7/8" Fillister Head Machine Screw
SR-BOLT
Bolt
Junior Flange Bolts
JR-BOLT
Cap
Yellow Plastic Cap for A40000012 & A12000004
CAPYELLOWA4A12
Adapter
Adapter for Liquid Withdrawal Valves
ADAPTERLIQ
Dip Tube
2033-15-12.6 ASME Dip Tube for Sherwood
SDT-12.6
Dip Tube
2033-15-15 ASME Dip Tube for Sherwood
SDT-15
Dip Tube
Other Dip Tube Lengths Available – Contact All Safe
NA
Pigtail
12" POL male-to-male Pigtail
PT12-MALE
Pigtail
20" POL male-to-male Pigtail
PT20-MALE
T Block
POL T-Block
TBLCK-LP
Bonnet Assembly
ASME Lower Bonnet Assembly for Dual and Single Bonnet Valves
SASMELB
Bonnet Assembly
ASME Upper Bonnet, Stem, & Handwheel Assembly for Dual Bonnet Valve
SASMEUB
Bonnet Assembly
ASME Lower Bonnet Assembly with Kit Parts Included
LPBA6775-60
Bonnet Assembly
Sherwood Bonnet Assembly
LPBA3329
Bonnet Assembly
100 lb. POL Valves & 420 lb. Multi Valve Bonnet Assembly
SPOLB
Bonnet Assembly
Plummers Pot Bonnet Assembly (Only)
SPPB
Repair Kit
DOT 100-200 lb. Multi Valve Bonnet Assembly Kit
SDOT100BKIT
Repair Kit
Sherwood Fill Valve Repair Kit
SPKIT6
REPLACEMENT PARTS
[email protected] / 866-958-3473
INDUSTRIAL & WELDING Your work depends on reliable, quality equipment. All Safe Global is dedicated to providing everything you need to get the job done right. Our unmatched selection of cylinders, valves, regulators, and parts comes with equally unmatched support. A knowledgeable sales and technical support staff, worldwide shipping capabilities, and financing assistance all work together to make All Safe Global the leader in industrial gas equipment.
CYLINDERS
• High-quality chrome-moly steel construction
High-Pressure Aluminum Cylinders
• Factory painted in standard colors
• U.S. DOT- and TC-approved • 4 to 265 cu ft capacities • 1800 to 3000 PSI pressure ratings
Acetylene Cylinders
• Ships empty
• U.S. DOT- and TC-approved
• Suitable for many applications including helium, oxygen, inert and more
• 10 to 145 cu ft capacities
• Highly corrosion-resistant interior and exterior, ideal for wet gases such as CO2
• Protective cap included with 75 cu ft and larger cylinders
• Performs well at low temperatures
• Custom options available: cylinder paint colors, cylinder shoulder stamping, and high-quality valve installation
• Lightweight – up to 40 percent lighter than comparable steel Tanks • Consistent Tare Weight • Thick, consistent walls resist damage • Brushed external surface provides a low-maintenance finish
High-Pressure Steel Cylinders
• Asbestos-free porous mass • Factory painted in standard colors
Breathing Air Cylinders • U.S. DOT, ISO/UN, and TC approved • 500 and 585 cu ft capacities • Protective cap and neck ring included • High-strength chrome-moly steel construction
• U.S. DOT, ISO/UN, and TC-approved
• Factory painted in standard colors
• 20 to 600 cu ft capacities
• Custom options available: cylinder paint colors, cylinder shoulder stamping, and high-quality valve installation
• Protective cap and neck ring included with 80 cu ft and larger cylinders
18
• Custom options available: cylinder paint colors, cylinder shoulder stamping, and high-quality valve installation
INDUSTRIAL & WELDING
[email protected] / 866-958-3473
INDUSTRIAL & WELDING INTRODUCTION
CO2 Cylinders • U.S. DOT- and TC- approved
Valves
• 1800 PSI cylinders for CO2 and related gas blends, including beer mix
All Safe Global stocks high-quality valves for virtually every compressed gas application – medical, propane, welding, fire suppression, SCBA, refrigeration, beverage, and more.
• Available in 2.5 to 100 lb. capacities, including the world’s largest portable aluminum CO2 cylinder at 50 lbs. • Ships empty • Can be converted for other applications such as nitrous oxide (additional charges apply) • Highly corrosion-resistant interior and exterior, ideal for wet gases such as CO2 • Performs well at low temperatures • Lightweight – up to 40 percent lighter than comparable steel tanks • Consistent Tare Weight • Thick, consistent walls resist damage • Brushed external surface provides a low-maintenance finish
Cryogenic & Liquid Cylinders • Continuous flow rates • Portable and vacuum-insulated • Full circle shock-mount ring • Innovative non-binding contents gauge • Polished heavy-duty outer body • Reinforced lateral head support • Simple operation and longer run times for improved operational efficiency • Color-coded relief valves for different pressure settings • 5 to 7-year warranty on vacuum (cylinder dependent)
19
VALVES & REGULATORS
INDUSTRIAL & WELDING
Every valve is manufactured to North American production standards, and meets our demanding requirements for quality materials and precise construction. Many of our manufacturing partners are ISO 9001-certified, meeting the strictest manufacturing and quality benchmarks in the industry. All valves feature: • Robust construction, with a durable brass body and precisely machined internal components • Pressure Relief Devices (PRD) with excellent flow and a robust, durable thread design • Leak rate-testing with 100% helium • Designs suitable for low- and high-pressure applications • Cleaning for oxygen applications where appropriate
Regulators All Safe Global offers a wide variety of regulators and flow control devices for CO2 and nitrogen applications. Our line of nitrogen, CO2, and HVAC regulators feature: • Robust brass and aluminum construction, for reliable performance over time • Safety-first design, including pressure-relief systems and impactresistant gauges and gauge covers • Locking adjustment valves with durable, user-friendly polycarbonate bonnets • CO2 regulators include a 10 micron contaminant filter and are available in single or dual pressure gauge configurations.
[email protected] / 866-958-3473
INDUSTRIAL & WELDING CYLINDERS
CGA Fitting by Gas Service see page 4
HIGH PRESSURE ALUMINUM CYLINDERS Size
Gas Service
Description
Part Number
4 cu ft
Multiple
4 cu ft Aluminum Cylinder – 2216 PSI – Standard Dome
4CUFTALVLV
7 cu ft
Multiple
7 cu ft Aluminum Cylinder – 2015 PSI – Standard Dome
7CUFTALVLV
20 cu ft 22 cu ft
Multiple Multiple
20 cu ft Aluminum Cylinder – 2015 PSI – No Paint 22 cu ft Aluminum Cylinder – 2216 PSI – Custom Painted Dome
20CUFTALVLV 22CUFTALVLV
33 cu ft
Multiple
33 cu ft Aluminum Cylinder – 2216 PSI – Custom Painted Dome
33CUFTALVLV
60 cu ft
Multiple
60 cu ft Aluminum Cylinder – 2216 PSI – Custom Painted Dome
60CUFTALVLV
88 cu ft
Multiple
88 cu ft Aluminum Cylinder – 2216 PSI – Standard Dome
88CUFTALVLV
150 cu ft
Multiple
150 cu ft Aluminum Cylinder – 2015 PSI – Carry Handle – Brushed Finish
150CUFTALVLV
265 cu ft
Multiple
265 cu ft Aluminum Cylinder – 2216 PSI – Standard Dome
265CUFTALVLV
Valves Installed per Customer Request
20CUFTALVLV
20
22CUFTALVLV
HIGH PRESSURE ALUMINUM CYLINDERS
60CUFTALVLV
All Safe offers a unique selection of high pressure (2015 PSI to 3000 PSI) aluminum cylinders for containment of a variety of gases. Sizes range from 4 cu ft to 270 cu ft. All cylinders offered are manufactured to meet DOT and TC specifications.
[email protected] / 866-958-3473
INDUSTRIAL & WELDING CYLINDERS
HIGH PRESSURE STEEL CYLINDERS Size
Gas Service
Description
Part Number
20 cu ft
Multiple
20 cu ft Steel Cylinder – Standard Valve
20STEEL
40 cu ft
Multiple
40 cu ft Steel Cylinder – Standard Valve
40STEEL
40 cu ft
Multiple
40 cu ft Steel Cylinders – Standard Valve – Cap & Collar
40STEELCAP
55 cu ft
Multiple
55 cu ft Steel Cylinder – Standard Valve – Cap & Collar
60STEEL
80 cu ft
Multiple
80 cu ft Steel Cylinder – Standard Valve – Cap & Collar
80STEEL
Valves installed per customer request Choose valve type, custom paint, stencil, & collar options
For more information on the differences and advantages of ISO cylinders, see pages 51–53. All Safe offers a large selection of high pressure steel cylinders that are US DOTand TC-approved. All Safe carries both US DOT/TC marked cylinders and UN/ISO marked cylinders (Both approved for use in USA and Canada by the U.S. Department of Transportation & Transport Canada). We generally recommend ISO type when purchasing steel.
20STEEL
21
HIGH PRESSURE STEEL CYLINDERS
40STEEL
80STEEL
[email protected] / 866-958-3473
INDUSTRIAL & WELDING CYLINDERS
HIGH PRESSURE STEEL CYLINDERS Size
Gas Service
Description
Part Number
125 cu ft
Multiple
125 cu ft Steel Cylinder – Standard Valve – Cap & Collar
125STEEL
150 cu ft
Multiple
150 cu ft Steel Cylinder – Standard Valve – Cap & Collar
150STEEL
250 cu ft
Multiple
250 cu ft Steel Cylinder – Standard Valve – Cap & Collar
250STEEL
300 cu ft
Multiple
300 cu ft Steel Cylinder – Standard Valve – Cap & Collar
300STEEL
Valves installed per customer request Choose valve type, custom paint, stencil, & collar options
For more information on the differences and advantages of ISO cylinders, see pages 51–53. All Safe offers a large selection of high pressure steel cylinders that are US DOTand TC-approved. All Safe carries both US DOT/TC marked cylinders and UN/ISO marked cylinders (Both approved for use in USA and Canada by the U.S. Department of Transportation & Transport Canada). We generally recommend ISO type when purchasing steel.
125STEEL
22
150STEEL
HIGH PRESSURE STEEL CYLINDERS
250STEEL
300STEEL
[email protected] / 866-958-3473
INDUSTRIAL & WELDING CYLINDERS
BREATHING AIR CYLINDERS Size
Gas Service
Description
Part Number
345 cu. ft 500 cu ft
Breathing Air Breathing Air
345 cu ft UN/ISO cylinder with standard valve inlet - 3600 PSI 500 cu ft UN/ISO Cylinder – 25E Valve Inlet – 4500 PSI
345STEEL 500STEEL-25E
500 cu ft 585 cu ft
Breathing Air Breathing Air
500 cu ft Exemption Special Permit Cylinder – 3/4"-14 NGT Valve Inlet – 4500 PSI 585 cu ft UN/ISO Cylinder – 25E Valve Inlet – 6000 PSI
500STEEL 585STEEL-25E
585 cu ft
Breathing Air
585 cu ft Exemption Special Permit Cylinder – 3/4"-14 NGT valve inlet – 6000 PSI
585STEEL
Varies
Breathing Air
Note: other sizes of breathing air also available. Contact your represenative for details.
Varies
Standard CGA valves installed per customer request
345STEEL
23
BREATHING AIR CYLINDERS
500STEEL-25E
585STEEL-25E
[email protected] / 866-958-3473
INDUSTRIAL & WELDING CYLINDERS
ACETYLENE CYLINDERS Size
Gas Service
Description
Part Number
10 cu ft
Acetylene
“MC" 10 cu ft Steel Cylinder – No Cap Required
ACET-MC
40 cu ft
Acetylene
“B" 40 cu ft Steel Cylinder – No Cap Required
ACET-B
40 cu ft
Acetylene
“B" 40 cu ft Steel Cylinder – Includes Cap
ACET-B-CAP
75 cu ft
Acetylene
75 cu ft Steel Cylinder – Includes Cap
ACET-75CUFT
145 cu ft
Acetylene
145 cu ft Steel Cylinder – Includes Cap
ACET-145CUFT
Valves installed per customer request
ACET-MC
24
ACETYLENE CYLINDERS
ACET-B
ACET-75CUFT
ACET-145CUFT
All Safe offers acetylene cylinders that are US DOT- and TC-approved.
[email protected] / 866-958-3473
INDUSTRIAL & WELDING CYLINDERS
ALUMINUM CO2 CYLINDERS Size
Gas Service
Description
Part Number
2.5 lb.
CO2
2.5 lb. Aluminum – CGA320 Valve – 1800 PSI
25LBALVLV
5 lb.
CO2
5 lb. Aluminum – CGA320 Valve – 1800 PSI
5LBALVLV
10 lb.
CO2
10 lb. Aluminum – CGA320 Valve – 1800 PSI
10LBALVLV
10 lb.
CO2
10 lb. Aluminum – CGA 320 Valve – 1800 PSI – Carry Handle
10LBALVLV-H
15 lb.
CO2
15 lb. Aluminum – CGA320 Valve – 1800 PSI
15LBALVLV
20 lb.
CO2
20 lb. Aluminum – CGA320 Valve – 1800 PSI – Carry Handle
20LBALVLV
35 lb.
CO2
35 lb. Aluminum – CGA320 Valve – 1800 PSI – Carry Handle
35LBALVLV
50 lb.
CO2
50 lb. Aluminum – CGA320 Valve – 1800 PSI – Carry Handle or Cap
50LBALVLV
Standard CGA valves installed per customer request
25LBALVLV
25
5LBALVLV
ALUMINUM CO2 CYLINDERS
10LBALVLV
20LBALVLV
35LBALVLV
50LBALVLV
[email protected] / 866-958-3473
INDUSTRIAL & WELDING CYLINDERS
STEEL CO2 CYLINDERS Size
Gas Service
Description
Part Number
20 lb.
CO2
20 lb. Steel Cylinder – CGA320 Valve – Cap
20LB-ST-VLV
50 lb.
CO2
50 lb. Steel Cylinder – CGA320 Valve – Cap
50LB-ST-VLV
75 lb.
CO2
75 lb. Steel Cylinder – CGA320 Valve – Cap
75LB-ST-VLV
100 lb.
CO2
100 lb. Steel Cylinder – CGA320 Valve – Cap
100LB-ST-VLV
Standard CGA valves installed per customer request
Silk screen, stamp, stencil, wrap, or adhesive label cylinders with your brand or message. Custom neck rings can also be installed on steel cylinders. Please call for details.
50LB-ST-VLV
26
STEEL CO2 CYLINDERS
75LB-ST-VLV
[email protected] / 866-958-3473
INDUSTRIAL & WELDING CYLINDERS
CRYOGENIC LIQUID CYLINDERS & DEWARS
Size
Gas Service
Description
Part Number
600 lb.
Liquid CO2
600 lb. Liquid CO2 Capacity – Primary PRD 300 PSI
LC-CO2-600lb-TW
175 liter
Liquid Nitrogen
175 liter Nitrogen – Withdrawal Rate 350 cfh. PRD 350 PSI
LC-N2-175L-TW
4 liter
Liquid Nitrogen Dewar
4 liter Capacity Liquid Nitrogen Dewar
LD-4L-TW
10 liter
Liquid Nitrogen Dewar
10 liter Capacity Liquid Nitrogen Dewar
LD-10L-TW
25 liter
Liquid Nitrogen Dewar
25 liter Capacity Liquid Nitrogen Dewar
LD-25L-TW
Withdrawal
Withdrawal Device
Liquid Withdrawal Device for LD25 Liquid Nitrogen Dewar
LDLW25
LD-25L-TW
27
CRYOGENIC LIQUID CYLINDERS & DEWARS
LD-25L-TW
LC-CO2-600lb-TW
Cyrogenic Liquid Valves see page 34.
[email protected] / 866-958-3473
INDUSTRIAL & WELDING CYLINDERS
PROPYLENE STEEL CYLINDERS Size
Gas Service
Description
Part Number
25.5 lb.
Propylene
25.5 lb. Steel Cylinder – 260 PSI with 10% Valve – Cutting Fuel
25.5LB260PSIVLV
60 lb.
Propylene
60 lb. Steel Cylinder – 260 PSI with 10% Valve – Cutting Fuel
60LB260PSIVLV
100 lb.
Propylene
100 lb. Steel Cylinder – 260 PSI with 10% Valve – Cutting Fuel
100LB260PSIVLV
Standard CGA valves installed per customer request
25.5LB260PSIVLV
28
PROPYLENE STEEL CYLINDERS
60LB260PSIVLV
100LB260PSIVLV
[email protected] / 866-958-3473
INDUSTRIAL & WELDING VALVES
COMMON VALVE PART NUMBER DESIGNATION
320 61-28-7OS-C
CGA Gas Service
Inlet Size
PRD – (Safety)
Oversize
Special Features
320 3/4" NGT = 61 Burst Pressure 4,7 or 24 Turns Toggle = T 580 1" NGT = 81 See Chart RPV = Residual Valve Pressure 540 .750" UNF = 51.750 Chrome = C 346 1.125" UNF = 51.1.125 MRI = MRI Compatible 347 1/2" NGT = 41 326 Manifold 1/2" NGT = 40 etc. UN = 25E Note: UNF type threads are “straight thread" with O-Ring seal typically used for aluminum & composite cylinders. NGT-type threads are a tapered thread typically for steel cylinders.
29
COMMON VALVE PART NUMBER DESIGNATION
[email protected] / 866-958-3473
INDUSTRIAL & WELDING VALVES
CGA Fitting by Gas Service see page 4
ACETYLENE SERVICE VALVES & PLUGS Type
Description
Part Number
CGA200
CGA200 Acetylene Valve – 3/8" NGT – CG3 PRD – Packed & Wrench Operated
S200
CGA200
CGA200 Acetylene Valve – 3/8" NGT – CG3 PRD – Hand Wheel
200HW
CGA300
CGA300 Acetylene Valve – 1/2" NGT Inlet – No PRD
30040
CGA300
CGA300 Acetylene Valve – 1" NGT – No PRD
30080
CGA300
CGA300 Acetylene Valve – 3/4" NGT – No PRD
30060
CGA400
CGA400 Acetylene Valve – 3/4" NGT – No PRD
41060
CGA510
CGA510 Acetylene Valve – 1/2" NGT – No PRD
51040
CGA510
CGA510 Acetylene Valve – 1" NGT – No PRD
51080
Propylene valves can be found on page 15. To determine the proper safety for your valve see our PRD selection chart on page 50.
30080
30
ACETYLENE SERVICE VALVES & PLUGS
200HW
30060
[email protected] / 866-958-3473
INDUSTRIAL & WELDING VALVES
ACETYLENE SERVICE VALVES & PLUGS Type
Description
Part Number
CGA510
CGA510 Acetylene Valve – 3/4" NGT – No PRD
51060
CGA510V
CGA510 Acetylene Valve – 3/4" NGT – GVT Vertical Outlet with handwheel
51060T-VERT
CGA510V
CGA510 Acetylene Valve – 3/4" NGT – Vertical Outlet – Wrench Style
51060-VERT-W
CGA510
CGA 510 Acetylene Valve – 3/4" NGT (+3 tours)
51060-3
VAC520B
VAC520B Acetylene Valve – 3/8" NGT – CG3 PRD
520B
VAC520B
VAC520B Acetylene Valve – 3/8" NGT – CG3 PRD with Handwheel
520BHW
Felt
Acetylene Felt 3/8”
FELT0375
Felt
Acetylene Felt 3/4”
FELT0750
Felt
Acetylene Felt 1”
FELT1000
Plug
Fuse Plug – 1/8" NPT – CG3 212F – Tin Steel
SGVFUSEPLUG-200B
Plug
Fuse Plug – 1/4" NPT – CG3 212 – Brass
SGVFUSEPLUG-212
Screen
Acetylene Screen 3/8”
SCREEN0375
Screen
Acetylene Screen 3/4”
SCREEN0750
Screen
Acetylene Screen 1”
SCREEN1000
Check out valve replacement parts on pages 45-49. To determine the proper safety for your valve see our PRD selection chart on page 50.
51060
31
ACETYLENE SERVICE VALVES & PLUGS
51060T-VERT
520BHW
[email protected] / 866-958-3473
INDUSTRIAL & WELDING VALVES
CGA Fitting by Gas Service see page 4
BREATHING AIR SERVICE VALVES Type
Description
Part Number
CGA346
CGA346 Valve – 3/4" NGT – 3000 PSI
34661-XX
CGA346
CGA346 Valve – 1" NGT – 3000 PSI
34681-XX
CGA346
CGA346 Valve – 1/2" NGT – Manifold – No PRD
34640
CGA346
CGA346 Valve – 1.125" Straight – 3000 PSI
34651-XX.1.125
CGA346
CGA346 Valve – .750" Straight – 3360 PSI
34651-XX.750
CGA347
CGA347 Valve – 3/4" NGT – .024" Oversize – 6750 PSI
34761-XX-24OS
CGA347
CGA347 Valve – 3/4" NGT – 6750 PSI
34761-XX
CGA347
CGA347 Valve – 25E – 6750 PSI
34725E1-XX
CGA347
CGA347 Valve – 1" NGT – 6750 PSI
34781-XX
CGA702
CGA702 Valve – 1" NGT – Special Order 250+
70281-XX
CGA702
CGA702 Valve – 3/4" NGT – 9000 PSI
70261-XX
CGA702
CGA702 Valve – 25E – 9000 EURO
70225E-XX
To determine the proper safety for your valve see our PRD selection chart on page 50.
34761-XX
32
BREATHING AIR SERVICE VALVES
70261-XX
[email protected] / 866-958-3473
INDUSTRIAL & WELDING VALVES
CO2 SERVICE VALVES Type
Description
Part Number
CGA320
CGA320 Valve – 1/2" NGT – 3000 PSI
32041-XX
CGA320
CGA320 Valve – 3/4" NGT – 3000 PSI
32061-XX
CGA320
CGA320 Valve – 1.125" NGT – 3000 PSI
32051-XX.1.125
CGA320
CGA320 Valve – 1/2" NGT – MANIFOLD
32040-XX
CGA320
CGA320 Valve – 1/2” NGT – MANIFOLD
32040M-XX040
CGA320
CGA320 Valve – 3/4” NGT – MANIFOLD
32060-XX
CGA320
CGA320 Valve – 3/4" NGT – MANIFOLD
32060M-XX060
CGA320
CGA320 Valve – .750" UNF – 3000 PSI
32051-XX.750
CGA320
CGA320 Valve – 1" NGT – 3000 PSI
32081-XX
To determine the proper safety for your valve see our PRD selection chart on page 50.
32051-XX.1.125
33
CO2 SERVICE VALVES
[email protected] / 866-958-3473
INDUSTRIAL & WELDING VALVES
CRYOGENIC VALVES Type
Description
Part Number
Shut-Off Valve
Cryogenic Shut-Off Valve for Liquid Cylinder Service
SCRYO9001
Shut-Off Valve
Cryogenic Shut-Off Valve for Liquid Cylinder Service
SCRYO9002
Type
Description
Part Number
HVAC Multi-Valve
Nitrogen Valve Regulator and Flowmeter for HVAC Purge – 250 PSI Test Pressure
REGHVAC-250
HVAC Multi-Valve
Nitrogen Valve Regulator and Flowmeter for HVAC Purge – 500 PSI Test Pressure
REGHVAC-500
HVAC MULTI-VALVES
REGHVAC-250 and -500 are innovative flowmeter / regulator combinations designed to test and purge HVAC systems with a single unit. Each features preset flows for brazing, purging, and testing; tool-less cylinder connection; content gauge; and large, easyto-read flow selector.
SCRYO9001
34
SCRYO9002
CRYOGENIC & HVAC MULTI-VALVES
REGHVAC-250
REGHVAC-500
[email protected] / 866-958-3473
INDUSTRIAL & WELDING VALVES
HYDROGEN SERVICE VALVES Type
Description
Part Number
CGA350
CGA350 Valve – 1.125" Straight – 3360 PSI/212F
35055-XX-1.125
CGA350
CGA350 Valve – 1/2" NGT – 3000 PSI 212F – Leaded safety
35045-XX
CGA350
CGA350 Valve – 3/4" NGT – 3360 PSI – .004" Oversize
35065-XX
CGA350
CGA350 Valve – 1/2" NGT – Manifold
35040
CGA350
CGA350 Cap & Chain – Brass
350CC
To determine the proper safety for your valve see our PRD selection chart on page 50.
35055-XX-1.125
35
HYDROGEN SERVICE VALVES
[email protected] / 866-958-3473
INDUSTRIAL & WELDING VALVES
INDUSTRIAL SERVICE VALVES Type
Description
Part Number
CGA330
CGA330 Valve – Stainless – 1 1/8" Straight Thread – 3360 PSI
33051-XX.1.125
Line Valve
Line Valve – 1/4" NGT – Male/Female – Compressed Air
3010
Line Valve
Line Valve Panel Mount – 1/4" NGT – Male / Female – Compressed Air
3010A
Line Valve
Line Valve Panel Mount – 1/4" NGT – Male / Female – 4 Port
3010-4F
CGA555
CGA555 Valve – 3/4" NGT – 3360 PSI
55561-XX
CGA577
CGA 577 Valve – 3/4" NGT – 5833 PSI
57761-XX
CGA880
CGA 880 Valve – 1/2" NGT Post
88044-XX
CNG Valve
CNG – 3/4" NGT – Inlet Dual – 1/4" NPT Outlet Vertical – 6750 PSI – Leaded Safety 212F
CNG61V65SB
CNG Valve
CNG – 3/4" NGT – Inlet Dual – 1/4" NPT Outlet Vertical – 6750 PSI – Non-Leaded Safety
CNG-61V-XX
CNG Valve
CNG – 3/4" NGT – Inlet Dual – 1/4" NPT Outlet Horizontal – 5833 PSI – Leaded Safety 212F
CNG61H-XX-SB
CGA296
CGA296 Valve – 3/4" NGT – 4000 PSI
29661-XX
Chlorine
660/820 Chlorine CL – XX Inlet – No PRD
660/820-CL-XX
Chlorine
660/820 Chlorine CL-1 Inlet– No PRD
660/820 CL-1
Manifold Valve
Manifold Valve – 1/2" x 1/2" NPT – Female Valve
430CM
To determine the proper safety for your valve see our PRD selection chart on page 50.
3010
36
INDUSTRIAL SERVICE VALVES
430CM
[email protected] / 866-958-3473
INDUSTRIAL & WELDING VALVES
INERT GAS SERVICE VALVES Type
Description
Part Number
CGA580
CGA580 Valve – 1/2" NGT – 4000 PSI
58041-XX
CGA580
CGA580 Valve – 1.125" UNF – 3000 PSI
58051-XX-1.125
CGA580
CGA580 Valve – .750" UNF – 3360 PSI
58051-XX.750
CGA580
CGA580 Valve – 3/4" NGT – 3000 PSI
58061-XX
CGA580
CGA580 Valve – 1" NGT – 3000 PSI
58081-XX
CGA580
CGA580 Valve – 1/2" NGT Manifold – No PRD
58040
CGA580
CGA580 Valve Lever Action with 3000 PSI Gauge – 3360 PSI PRD
SGV8032SYSLVRG
CGA580
CGA580 Valve Lever Action with 4000 PSI Gauge – 4000 PSI PRD
580-XX-SYSLVRG
CGA677
CGA677 Valve – 1" NGT – 10,000 PSI
67781-XX
CGA677
CGA677 Valve – 3/4" NGT – 10,000 PSI
67761-XX
CGA677
CGA677 Valve – 25E – 9000 PSI
67725E-XX
CGA680
CGA680 Valve – 3/4" NGT – 5833 PSI
68061-XX
CGA680
CGA680 Valve – 25E EURO Inlet – 6750 PSI
68025E1-XX
CGA680
CGA680 / 580 Valve – 3/4" Dual Outlet
680580-XX
To determine the proper safety for your valve see our PRD selection chart on page 50.
58061-XX
37
INERT GAS SERVICE VALVES
680580-XX
[email protected] / 866-958-3473
INDUSTRIAL & WELDING VALVES
NITROUS OXIDE SERVICE VALVES Type
Description
Part Number
CGA326
CGA326 Valve – 1/2" NGT – 3000 PSI
32641-XX
CGA326
CGA326 Valve – 1.125" 12 UNF – 3000 PSI
32651-XX-1.125
CGA326
CGA326 Valve – .750" UNF – 3360 PSI
32651-XX.750
CGA326
CGA326 Valve – 3/4" NGT – 3000 PSI
32661-XX
CGA326
CGA326 Valve – 1" NGT – 3000 PSI
32681-XX
CGA326
CGA326 Valve – 1/2" NGT Manifold – No PRD
32640
CGA660
CGA660 Valve – 1" NGT – 3000 PSI
66081-XX
CGA660
CGA660 Valve – 3/4" NGT – 3000 PSI Safety – Brass
66061-XX
CGA660
CGA660 Valve – 3/4" NGT – 3360 PSI Safety – Stainless
66061-ST-XX
CGA660
CGA660 Valve – 3/4" NGT – No Safety – Stainless
66061-ST-NS
CGA660
CGA660 Valve – 1.125" UNF – 3000 PSI
66051-XX.1.125
Cap & Chain
CGA660 Cap & Chain Stainless
660SCC
Cap & Chain
CGA660 Cap & Chain Brass
CAP-660-S-C
To determine the proper safety for your valve see our PRD selection chart on page 50.
32651-XX-1.125
38
NITROUS OXIDE SERVICE VALVES
[email protected] / 866-958-3473
INDUSTRIAL & WELDING VALVES
OXYGEN SERVICE VALVES Type
Description
Part Number
CGA540
CGA540 Valve – Vertical Oxygen with Gauge Port & Handwheel
54034-XX-G
CGA540
CGA540 Valve – 3/8" NGT – 3360 PSI
BS341-311-XX
CGA540
CGA540 Valve – .750" UNF – 3360 PSI
54031-XX
CGA540
CGA540 Valve – 1/2" NGT – 3000 PSI
54041-XX
CGA540
CGA540 Valve – 1.125" Straight – 3360 PSI
54051-XX-1.125
CGA540
CGA540 Valve – .750 UNF – 3360 PSI
54051-xx-.750
CGA540
CGA540 Valve – 3/4" NGT – 3000 PSI
54061-XX
CGA540
CGA540 Valve – 1/2" NGT Manifold – No PRD
54040
CGA540
CGA540 Valve – 1" NGT – 3000 PSI
54081-XX
For more oxygen service, medical mix, and medical post valves see the Medical section pages 58-59. To determine the proper safety for your valve see our PRD selection chart on page 50.
54051-XX-1.125
39
OXYGEN SERVICE VALVES
54061-XX
[email protected] / 866-958-3473
INDUSTRIAL & WELDING VALVES
RPV VALVES Type
Description
Part Number
Fill Adapter
580 RPV Fill Adapter – Fixed Pin
FA-580RPV
Fill Adapter
540 RPV Fill Adapter – Fixed Pin
FA-540RPV
Fill Adapter
320 RPV Fill Adapter – Fixed Pin
FA-320RPV
Type
Description
Part Number
CGA590
CGA590 Valve – 1 1/8"-12 UNF-2A 3360 PSI
59051-XX
CGA590
CGA590 Valve – 3/4" NGT 3360 PSI
59061-XX
SULFUR HEX OR COMPRESSED AIR
To determine the proper safety for your valve see our PRD selection chart on page 50.
FA-580RPV
40
RPV VALVES & SULFUR HEX OR COMPRESSED AIR
59051-XX
[email protected] / 866-958-3473
INDUSTRIAL & WELDING VALVES
REFRIGERANT VALVES Type
Description
Part Number
Relief
Pressure Relief Valve – Low Pressure Application
SRVRELIEF
CGA660
Liquid Valves – CGA660 – Low Pressure Application
SRV660L
CGA660
Vapor Valves – CGA660 – Low Pressure Application
SRV660V
CGA660
Dual Port Stack Valve w/Dip Tube – CGA 660 - 600 PSI
RRVSTACK
Dip Tube
Dip Tube Chemical & Thermal Resistant ‘Per Foot’ Min 48” Length.
RRVTUBE48
ACME Y Valve
Reclaim Valve Y 1/2" ACME Dual Port ACME Valve with Dip Tube- Liquid/Vapor DT12.5
RRVYACMEDT13
Y Valve
Reclaim Valve Y 1/4" Flare – Liquid/Vapor DT13.0 350 PSI STD
RVE16561A350B
Y Valve
Reclaim Valve Y 1/4" Flare – Liquid/Vapor DT13.0 600 PSI STD
RRVYFLAREDT13600
Handwheel
Blue Vapor Replacement Handwheel – Rotorex
67500003
Handwheel
Red Vapor Replacement Handwheel – Rotorex
67500004
To determine the proper safety for your valve see our PRD selection chart on page 50.
SRV660L
41
REFRIGERANT VALVES
RVE16561A350B
[email protected] / 866-958-3473
INDUSTRIAL & WELDING REGULATORS
PRIMARY REGULATORS Type
Description
Part Number
CO2 Primary Regulator
High Performance Dual Gauge – No Shutoff – 0-50 PSI Range –
CO2REG-DUAL-X
Dual 60 lb. & 2000 lb. Gauges
CO2 Primary Regulator
High Performance – MFL Shutoff Installed – 0-50 PSI Range –
Dual 60 lb. & 2000 lb. Gauges
CO2 Primary Regulator
High Performance – 1/4 Shutoff Installed – 0-50 PSI Range –
Dual 60 lb. & 2000 lb. Gauges
CO2 Primary Regulator
High Perfomance – MFL Shutoff with 5/16" Barb Swivel –
0-50 PSI Range – Dual 60 lb. & 2000 lb. Gauges
CO2 Primary Regulator
High Performance – Single 60 lb. Gauge – 5/16" Barb Outlet with Shutoff – 0-50 PSI Range
CO2REG-SINGLE-5/16BARB
CO2 Primary Regulator
High Performance – Single 60 lb. Gauge –
CO2REG-SINGLE-MFL-HP
MFL Outlet with Shutoff – 0-50 PSI Range
Nitrogen Primary Regulator
Nitrogen Primary Regulator – Dual Gauge – 5/16" Shutoff Installed –
0-50 PSI – 60 lb. & 3000 lb. Gauge
Nitrogen Primary Regulator
Nitrogen Primary Regulator – Dual Gauge – 1/4" Shutoff Installed –
0-50 PSI – 60 lb. & 3000 lb. Gauge
CO2REG-DUAL-MFL
42
CO2 & NITROGEN PRIMARY REGULATORS
CO2REG-SINGLE-MFL-HP
CO2REG-DUAL-MFL CO2REG-DUAL-1/4BARB CO2REG-DUAL-M516
N2REG-DUAL-5/16BARB N2REG-DUAL-1/4BARB
N2REG-DUAL-5/16BARB
[email protected] / 866-958-3473
INDUSTRIAL & WELDING REGULATORS
REGULATOR REPLACEMENT GAUGES
Type
Description
Part Number
CO2 Gauge
60 lb. 0 - 50 PSI High-Performance Replacement Gauge
REG-GAUGE60
CO2 Gauge
2000 lb. High-Performance Replacement Gauge
REG-GAUGE2000
Type
Description
Part Number
Shutoff Assembly
Shutoff Assembly – 1/4" NPT x 1/4" MFL with Check Valve
OUTLET-1/4FLARE
Shutoff Assembly
Shutoff Assembly – 1/4" NPT x 5/16" Hose Barb with Check Valve
OUTLET-5/16BARB
Shutoff Assembly
Shutoff Assembly – 1/4" NPT x 1/4" Hose Barb with Check Valve
OUTLET-1/4BARB
Nut & Nipple Assemblies
Nut & Nipple Assemblies: 320, 346, 347, 540, 580, 677, 680, 702, etc.
Nut/Nipple
ASSEMBLIES
CO2G60
43
REGULATOR REPLACEMENT GAUGES & ASSEMBLIES
CO2G2000
320 Nut & Nipple Assembly
[email protected] / 866-958-3473
INDUSTRIAL & WELDING REGULATORS
HVAC VALVE REGULATORS Type
Description
Part Number
HVAC Nitrogen Valve Regulator
Nitrogen Valve Regulator and Flowmeter for HVAC Purge –
REGHVAC-250
250 PSI Test Pressure
HVAC Nitrogen Valve Regulator
Nitrogen Valve Regulator and Flowmeter for HVAC Purge –
500 PSI Test Pressure
REGHVAC-500
WELDING REGULATORS
Type
Description
Part Number
CO2 / Argon Regulator
Accu-trol MIG / TIG Argon & Argon / CO2 Welding Regulator
REG-ACUMIG-200
Type
Description
Part Number
Oxygen Regulator
Beverage Oxygen Regulator “Oxygenator Kit" Amber Color
HB-OXY-REG1
BEVERAGE OXYGENATOR REGULATOR
REGHVAC-250
44
HVAC, WELDING, AND OXYGENATOR REGULATORS
REGHVAC-500
REG-ACUMIG-200
[email protected] / 866-958-3473
INDUSTRIAL & WELDING O-RINGS, SAFETIES & VALVE PARTS
O-RINGS Type
Description
Part Number
O-Ring
Small Medical Teflon O-Ring
OR1
O-Ring
Large Medical Teflon O-Ring
OR2
O-Ring
SCBA #3 O-Ring Quad
OR3
O-Ring
Paintball O-Ring Type 1 Air Cylinders
OR4
O-Ring
SCBA #5 Fiber Wrap O-Ring
OR5
O-Ring
SCBA #6 O-Ring
OR6
O-Ring
SCBA #7 O-Ring
OR7
O-Ring
SCUBA V Type Green
OR8
O-Ring
Large CO2
OR9
O-RINGS
45
O-RINGS
[email protected] / 866-958-3473
INDUSTRIAL & WELDING O-RINGS, SAFETIES & VALVE PARTS
VALVE REPLACEMENT PARTS Type
Description
Part Number
Disk
Sherwood TV Friction Disk
STVFRICTIONDISK
Gauge
0-3000 PSI Oxygen Gauge 1/8" NGT
03000G
Handwheel
Sherwood TV Plastic Handwheel Washer
PW-13-S
Handwheel
Sherwood TV Lexan Handwheel
STVHWL
Handwheel
Sherwood TV Aluminum Handwheel
STVHWA
Handwheel
Sherwood GV Aluminum Handwheel
HWA
Handwheel
Sherwood GV Lexan Handwheel
HWL
Nut
Sherwood TV Nut
STVNUT
Nut
Sherwood GV Handwheel Nut
NUT
HWA
46
VALVE REPLACEMENT PARTS
HWL
STVHWA
STVHWL
[email protected] / 866-958-3473
INDUSTRIAL & WELDING O-RINGS, SAFETIES & VALVE PARTS
VALVE REPLACEMENT PARTS Type
Description
Part Number
Packing
Sherwood TV Packing
STVPACKING
Plug
Sherwood TV Plug & Seat Aseembly
STVPLUGSEAT
Plug
3010 Line Valve Plug & Seat
3506-9
Plug
Sherwood GV Lower Seat Plug – Small
SEATPLUGSM
Rebuild Kit
430 Series Rebuild Kit – Non Acetylene
430KIT
Socket
Sherwood Handwheel Socket
SGVSOCKET
Spring
Sherwood TV Spring
STVSPRING
Stem
Sherwood TV Stem & Tang
STVSTEMTANG
Stem
Sherwood GV Bonnet & Stem Assembly Oxygen Compatible
BONSTEMOXY
Stem
Sherwood GV Bonnet & Stem Assembly
BONSTEM
Please call for parts or brands not listed here
47
VALVE REPLACEMENT PARTS
[email protected] / 866-958-3473
INDUSTRIAL & WELDING O-RINGS, SAFETIES & VALVE PARTS
SIPHON TUBE & DIP TUBE ACCESSORIES Type
Description
Part Number
Adapter
68–64 3/8" OD X 1/4" MIP Compression Adapter
MIPCOMPRESSIONADAPT
Pipe
20' Copper Pipe Type L – 1/4" per Foot with Chop & Debur
COPPERPIPE2025
Thread Protector
Valve Protectors – Orange Snap On for CGA320 CO2 valves
CO2CAP1
Rubber Boot
Bottom Rubber Boot for 20 lb. CO2 Cylinder
GPB-01
Type
Description
Part Number
Sealant
Formula 8 Tube 100g
Formula8
Sealant
Lox 8 Paste Jar 100g
LOX8J-100g
Sealant
Lox 8 Paste Jar 10g
LOX8J-10g
Sealant
Lox 8 Paste Plunger 100g
LOX8P
Sealant Tape
Teflon Tape 3/4"
Teflon34
Sealant Tape
Teflon Tape 1/2"
Teflon12
THREAD SEALANT
Formula8
48
LOX8J-100g
SIPHON & DIP TUBE ACCESSORIES, THREAD SEALANT
LOX8P
Teflon34
[email protected] / 866-958-3473
INDUSTRIAL & WELDING O-RINGS, SAFETIES & VALVE PARTS
CARRY HANDLES & PARTS Type
Description
Part Number
Carry Handle
Carry Handle Luxfer Style
ASA
Carry Handle
Carry Handle Catalina Style
ASB
Carry Handle
Carry Handle KIDDE Style
ASC
Carry Handle
Carry Handle Threaded
AST
Collar
100 lb. LPG Acetylene Const Collar
CLPCO1
Collar
Threaded Collar with Cap
TCC
Cylinder Cap
Coarse Thread Cylinder Cap – 3 1/8" x 7 Thread – North American Coarse
HPCAPCOARSE
Cylinder Cap
Fine Thread Cylinder Cap – 3 1/8" x 11 Thread – North American Fine
CAP-HPF-SC
Fiber Washer
CO2 Fiber Washer 500 pkg.
CO2FIBERWasher
Handle Adapter
Luxfer Handle Adapter
LHA19
Leak Stopper
CO2 Leak Stoppers
CO2LEAKSTOPPER
Nylon Washer
CO2 Nylon Washer 1000 pkg.
CO2NYLONWasher
Snap Ring
Snap Ring Luxfer
SRA
Snap Ring
Snap Ring Catalina
SRB
Snap Ring
Snap Ring KIDDE
SRC
ASA
49
CARRY HANDLES & PARTS
HPCAPFINE
CO2FIBERWasher
CO2LEAKSTOPPER
[email protected] / 866-958-3473
INDUSTRIAL & WELDING PRD SELECTION CHART
PRD SELECTION CHART Disc Rupture Range PSI @ 165°F Minimum
Pressure Relief Device Cap Stamping
-26 1665
2500
2775
-28 1800
2700
3000
-32 2015
3025
3360
-35 2265
3400
3775
-38 2400
3600
4000
-39
3915
4350
-43 2670
4005
4450
-46 2900
4350
4833
-47 2950
4425
4917
-48 3000
4500
5000
-50
4860
5600
-55 3500/3600
5250
5833
-63 4000
6000
6665
-65
6075
6750
-78 5000
7500
8333
-85
8100
9000
9000
10000
-XX Suffix
D.O.T. Spec 3A, 3AA, 3AL Cylinders in PSI
D.O.T. Exemption Cylinders in PSI
3600 4500 6000
-95 6000
50
PRD SELECTION CHART
[email protected] / 866-958-3473
INDUSTRIAL & WELDING
ISO VS. DOT HIGH PRESSURE CYLINDERS All Safe Global: Cylinder Certification & Specification Overview All Safe Global has been a U.S. DOT-certified hydrostatic testing facility for over 40 years. In addition to offering new cylinders for sale, we perform refurbishing and cylinder recertification services which are compliant with, and monitored by, the U.S. DOT. UN/ISO Cylinders are equivalent to, and arguably superior to, DOT/TC-rated cylinders for the following reasons:
3. UN/ISO cylinders have a higher working pressure and gas volume capacity than, DOT/TC cylinders. 4. DOT/TC-stamped cylinders are acceptable for transport to, from, and within the U.S. UN/ISO-stamped cylinders must have “USA" country-of-approval marking to be acceptable for transport to, from, or within the U.S. All Safe Global’s UN/ISO cylinders are stamped “USA".
1. In addition to the USA and Canada, All Safe Global’s UN/ISO cylinders are approved for use in almost every country around the world. UN/ISO is a worldwide, harmonized regulation for compressed gas cylinders that is universally recognized. This means cylinders can cross country borders and still be filled easily.
5. DOT/TC markings must conform to the applicable requirements of 49 CFR 178.35, and UN/ISO pressure receptacles markings must conform to the applicable requirements of 49 CFR 178.71.
2. Higher-rated capacities allow for UN/ISO cylinders to be easily integrated into a fleet of DOT/TC cylinders. UN/ISO service pressure is at or above the common fill pressure of a DOT cylinder with a +10% overfill designation. Also, our UN/ISO cylinders contain friendly markings with service pressures rated in PSI and bar.
7. DOT/TC date of manufacture is expressed as month-year (10-13), while UN/ISO is stamped year (4 digits) and month (2013/01)
3. UN/ISO cylinders remain in circulation at maximum capacity for the life of the tank. Due to the higher design ratings for pressure, UN/ISO cylinders do not require REE (Rejection Elastic Expansion) testing to achieve the common cylinder service pressures used and approved in North America. While REE is a valuable and stringent test, DOT/TC cylinders will often have their maximum fill pressure ratings reduced after testing. This is very inconvenient for fillers, because they like to fill many cylinders at once with the same pressure.
Facts and Differences About UN/ISO and DOT/TC Stamping Requirements: 1. Gas fillers in the USA can legally fill UN/ISO and DOT/TC cylinders that meet CFR regulations.
6. DOT/TC and UN/ISO cylinder markings are expressed in conventional units.
8. DOT/TC stamps service pressure only in PSI. All Safe Global UN/ ISO cylinders have stamps for both service pressure (PW) and test pressure (PH) in bar and PSI. 9. DOT/TC does not require inlet thread profile to be stamped. UN/ ISO requires the inlet thread profile to be stamped. 10. The manufacture approval number granted by U.S. Department of Transportation (Pipeline and Hazardous Materials Safety Administration) is required by both the DOT/TC and UN/ISO. If manufactured in same facility, the approval number will be the same. 11. Third-party independent inspection is required for both DOT/TC and UN/ISO designs. 12. There is no plus or star for UN/ISO cylinders. The service pressure is already at or above the 10% overfill authorized for select gas services by DOT/TC.
2. All Safe Global UN/ISO and DOT/TC cylinders are manufactured in the U.S. and other foreign countries.
51
ISO VS. DOT HIGH PRESSURE CYLINDERS
[email protected] / 866-958-3473
INDUSTRIAL & WELDING
ISO VS. DOT HIGH PRESSURE CYLINDERS What is the Requalification Frequency for UN/ISO Cylinders, How are They Requalified, and What are the Markings? 1. UN/ISO pressure receptacles must be requalified at least once every 10 years, except for composite cylinders and pressure receptacles used for certain specialized service which must be requalified every 5 years (49 CFR 180.207). 2. The requalification markings must conform to the requirements of 49 CFR 180.213. ............................................................................ 3. UN/ISO pressure receptacles may be requalified by a hydraulic pressure test or by ultrasonic examination (UE). The hydraulic pressure test may be either the volumetric expansion test or the proof pressure test. (49 CFR 180.207)............................ 4. 49 CFR 180.207(c) Requalification interval. Each UN/ ISO pressure receptacle that becomes due for periodic requalification must be requalified at the interval specified in the following table:
52
ISO VS. DOT HIGH PRESSURE CYLINDERS
Requalification Intervals of UN Pressure Receptacles Interval (years)
UN pressure receptacles/ hazardous materials
10……………..
Pressure receptacles for all hazardous materials except as noted below (also for issolved acetylene, see paragraph (d)(3) of this section):
5………………..
Composite pressure receptacles.
5………………..
Metal hydride storage systems.
5………………..
Pressure receptacles used for:
All division 2.3 materials. UN1013, Carbon dioxide. UN1043, Fertilizer ammoniating solution with free ammonia. UN1051, Hydrogen cyanide, stabilized containing less than 3% water.
UN1052, Hydrogen fluoride, anhydrous. UN1745, Bromine pentafluoride. UN1746, Bromine trifluoride. UN2073, Ammonia solution. UN2495, Iodine pentafluoride. UN2983, Ethylene oxide and propylene oxide mixture, not more than 30% ethylene oxide.
[email protected] / 866-958-3473
INDUSTRIAL & WELDING
ISO VS. DOT HIGH PRESSURE CYLINDERS UN-ISO AND DOT/TC FRIENDLY MARKINGS ON ALL SAFE CYLINDERS (Note both ISO and TC Markings are Present for Ease of Filling in USA and Canada): Working Pressure (PSI) Test Pressure (PSI)
Manufacture’s Identification
Country of Manufacture
Manufacture Serial Number
Identification of Cylinder Thread Stamp for NDT
Hydrogen Compatible Minimum Wall Thickness
UN Marking
Test Pressure (bar)
Empty Weight (no value)
Initial Test Date (yr/mth)
Standard
Working Pressure
Water Capacity
Inspection Stamp Country of Approval Stamp Mark
TOP ROW—Contains manufacturing marks such as the cylinder thread type, the country of manufacture, and the serial number assigned by the manufacturer.
Other markings are permitted in low-stress areas, provided they are not on the side wall. Other marks must not conflict with the required markings.
MIDDLE ROW—Contains operational marks such as the minimum wall thickness, the tare or empty weight, water capacity in liters, working pressure (PW) in bar, and test pressure (PH) in bar.
All ISO/UN cylinders provided by All Safe comply with applicable requirements in 173.301b and 173.304b for transportation and filling.
BOTTOM ROW—Contains certification marks such as the UN packaging symbol, the ISO standard, the country or countries of approval, the manufacturer’s approval mark, the approved third party independent inspection agency identification stamp, and the initial inspection year and month separated by a slash.
53
Approval Number
UN-ISO AND DOT/TC MARKINGS
*Note: Refillable seamless steel cylinders conforming to ISO 9809-1, 9809-2, or 9809-3 are authorized with UN USA approval within the U.S. All Safe UN/ISO cylinders are ISO9809-1 UN USA approved.
[email protected] / 866-958-3473
MEDICAL Health care organizations worldwide rely on the proven performance of our medical compressed gas equipment. We feature a full range of high-quality cylinders, valves, regulators, and carts for all your care requirements.
Medical Gas Cylinders
Medical Valves and Regulators
Exceptionally safe and strong, our cylinders are in daily use by EMS teams, home oxygen providers, and medical institutions. Available in all medical standard sizes, including E, D, M6, M9, M24, and M122.
All Safe Global carries post valves, mix service valves, regulators, and integrated valve regulators for most medical and EMS gas applications. Manufactured to exacting standards of performance and reliability, our valves and regulators are available for steel, aluminum and composite cylinders, and in all common medical gas service configurations.
• Tough and Durable: All Safe cylinders are fracture-tough, resistant to tears and cracks under extended high-pressure loads, and inherently corrosion-resistant, for long service life in the most demanding environments
Medical Post Valves
• Lightweight: We feature easy-to-carry carbon composite and aluminum cylinders—up to 40% lighter than steel
• Durable: Extruded brass chrome-finished valve bodies provide long cycle life and excellent corrosion resistance
• Tested Safe: All cylinders undergo and pass rigorous strength and integrity tests, and meet or exceed all industry quality and safety requirements
• Protected: Chamber design protects threads and valve stem from accidental damage
• Transport Ready: All cylinders strictly conform to Department of Transportation (DOT) specifications. Most also conform to and are approved under Transport Canada (TC) specifications • Labels Included: Easy-to-read consumer warning decals with every cylinder, for the protection of you and your customers • Ships unfilled • Free shipping available on pallet orders of certain cylinders • Contact us for up-to-the-minute cylinder availability
• Secure: Engineered for complete, low-torque sealing and leak resistance, with precise thread machining, Teflon packing, dual O-Rings, and a leak-resistant bonnet seal • Safe: Valves feature an integrated pressure relief device for proper assembly, lasting safety, and tamper-resistance • Ready for use with all CGA-specified yoke style valves • Available in wrench- or toggle-type connections • Fully cleaned for oxygen service • Contact us for up-to-the-minute valve availability Please note: for handwheel-type and other medical gas valves, please see the Industrial Valves section of this catalog. For O-Rings and replacement parts, please see the Industrial O-Ring, Safeties, and Valve Replacement Parts section of this catalog.
54
MEDICAL
[email protected] / 866-958-3473
MEDICAL
INTRODUCTION Medical Regulators • Durable: Precision-machined from aluminum for long life, light weight, and compact form • Easy to Use: Large, user-friendly markings for simple and accurate flow adjustment • Secure: Engineered for leak resistance, with precise thread machining • Versatile: For maximum usability in a wide range of applications, each regulator comes with yoke- and nut-style inlet connections and are available in multiple flow ranges • Fully cleaned for oxygen service • Contact us for up-to-the-minute regulator availability
Medical Cylinder Carts Our Rack N’ Roll Modular Cylinder System provides simple and secure storage for aluminum medical gas cylinders. The system features completely molded construction, no-rattle trays, and aluminum handles, and is available in stationary or smooth-rolling locking wheel designs.
55
MEDICAL
[email protected] / 866-958-3473
MEDICAL CYLINDERS
CGA Fitting by Gas Service see page 4
MEDICAL OXYGEN CYLINDERS Type
Description
Part Number
E
Medical E – Aluminum Cylinder – Standard Post Valve
MEALALUM
D
Medical D – Aluminum Cylinder – Standard Post Valve
MDALUM
M4
Medical M4 – Aluminum Cylinder – Standard Post Valve
M4ALUM
M6
Medical M6 – Aluminum Cylinder – Standard Post Valve
M6ALVLV
M7
Medical M7 – Aluminum Cylinder – Standard Post Valve
M7ALUM
M9
Medical M9 “C" – Aluminum Cylinder – Standard Post Valve
M9ALUM
M22
Medical M22 – “Jumbo D" Aluminum Cylinder – Standard Post Valve
M22ALUM
M60
Medical M60 – Aluminum Cylinder – CGA540 Valve
M60ALUM
M90
Medical M90 – Aluminum Cylinder CGA540 Valve
M90ALUM
M122
Medical M122 (MM) – Aluminum Cylinder – CGA540 Valve – Plus Cap & Collar
MMALUM
M150
Medical M150 – Aluminum Cylinder – CGA540 Valve – Plus Carry Handle
M150ALUM
M200
Medical M200 - Aluminum Cylinder - CGA540 Valve - Plus Carry Handle
M200ALUM
MEALALUM
56
MEDICAL OXYGEN CYLINDERS
MDALUM
M6ALVLV
M60ALUM
Ask about free freight of pallet quantities on certain medical cylinders.
[email protected] / 866-958-3473
MEDICAL CYLINDERS
MEDICAL OXYGEN CYLINDERS Type
Description
Part Number
M09B
M09B – Carbon Composite Cylinder – Standard Post Valve
M09B-COMP
M15A
M15A – Carbon Composite Cylinder – Standard Post Valve
M15A-COMP
M24A
M24A – Carbon Composite Cylinder – Standard Post Valve
M24A-COMP
M66A
M66A – Carbon Composite Cylinder – Standard Post Valve
M66A-COMP
MB08
MB08 – Standard Post Valve – 3000 PSI High Capacity Aluminum Cylinder
MB08-HC
MC13
MC13 – Standard Post Valve – 3000 PSI High Capacity Aluminum Cylinder
MC13-HC
MD22
MD22 – Standard Post Valve – 3000 PSI High Capacity Aluminum Cylinder
MD22-HC
MEDICAL CYLINDER CARTS Type
Description
Part Number
Cylinder Cart
Rack N’ Roll Complete – with Wheels
RNR-W
Cylinder Cart
Rack N’ Roll Complete – Stationary
RNR-S
Handles
Rack N’ Roll Handles
RNRHANDLE
Tray
Rack N’ Roll Lower Tray
RNRLOWERTRAY
Tray
Rack N’ Roll Upper Tray
RNRUPPERTRAY
RNR-W
57
MEDICAL OXYGEN CYLINDERS & CARTS
Ask about free freight on pallet quantities ofcertain medical cylinders.
[email protected] / 866-958-3473
MEDICAL VALVES
CGA Fitting by Gas Service see page 4
MEDICAL POST VALVES Type
Description
Part Number
Oxygen
CGA870 Post Valve – 1/2" NGT Yellow – 3360 PSI
87044-XX
Oxygen
CGA870 Post Valve – 1/2" NGT Yellow – 3360 PSI Toggle
87044-XX-T
Oxygen
CGA870 Post Valve – 3/4" UNF – Yellow 3360 PSI
87054-XX
Oxygen
CGA870 Post Valve – 3/4" UNF – Yellow 3360 PSI MRI
87054-XX-MRI
Oxygen
CGA870 Post Valve – 3/4" UNF – Yellow 3360 PSI Toggle
87054-XX-T
Oxygen
CGA870 Post Valve – 3/4" UNF – Yellow 3360 PSI Gauge Port
87054-XX-G
CO2
CGA940 Post Valve – 1/2" NGT 3360 PSI
94041-XX
CO2
CGA940 Post Valve – .750" UNF 3360 PSI
94051-XX
For the oxygen service valves CGA540 (handwheel type), other medical valves, handwheels, and handwheel types see the Industrial Valves section for the specific gas type. For O-Rings and parts see our Industrial O-Rings, Safeties & Valve Replacement Parts pages 45–49.
87054-XX
58
MEDICAL POST VALVES
87054-XX-T
87054-XX-MRI
87054-XX
[email protected] / 866-958-3473
MEDICAL VALVES
MEDICAL POST VALVES Type
Description
Part Number
Inert/Nitrogen
CGA930 Post Valve – 1/2" NGT 3360 PSI
93044-XX
Inert/Nitrogen
CGA960 Post Valve – 1/2" NGT 3360 PSI
96044-XX
Inert/Nitrogen
CGA960 Post Valve – .750" UNF 3360 PSI
96054-XX
Nitrous Oxide
CGA910 Post Valve – 1/2" NGT 3360 PSI
91041-XX
Nitrous Oxide
CGA910 Post Valve – .750" UNF 3360 PSI
91051-XX
Breathing Air
CGA950 Post Valve – 1/2" NGT 3360 PSI
95044-XX
Breathing Air
CGA950 Post Valve – .750" UNF 3360 PSI
95054-XX
Medical Gas Mixtures
CGA965 Post Valve – .750" UNF 3360 PSI
96554-XX
Medical Gas Mixtures
CGA973 Post Valve – 1/2" NGT 3360 PSI
97344-XX
Medical Gas Mixtures
CGA973 Post Valve – .750" UNF 3360 PSI
97354-XX
MEDICAL MIX SERVICE Type
Description
Part Number
CGA500
CGA500 Valve – 3/4" NGT 3360 PSI
50061-XX
CGA500
CGA500 Valve – .750" UNF 3360 PSI
50051-XX.750
For the Oxygen Service Valve CGA540 handwheel type see page 39.
59
MEDICAL POST & MEDICAL MIX VALVES
[email protected] / 866-958-3473
MEDICAL REGULATORS
MEDICAL OXYGEN REGULATORS Type
Description
Part Number
Aluminum Regulator
0-4 LPM CGA540 Mini Regulator – Brass Insert – Barb Outlet – Fraction
RM-04-540-BARB-FRAC
Aluminum Regulator
0-4 LPM CGA870 Mini Regulator – Brass Insert – Barb Outlet – Decimal
RM-04-870-BARB-DEC
Aluminum Regulator
0-4 LPM CGA870 Mini Regulator – Brass Insert – Barb Outlet – Fractions
RM-04-870-BARB-FRAC
Aluminum Regulator
0-4 LPM CGA540 Regulator – Brass Insert – DISS Fitting
RM-04-540-D
Aluminum Regulator
0-4 LPM CGA540 Regulator – Brass Insert – Decimal – DISS Fitting
RS-04-540-DISS-DEC
Aluminum Regulator
0-4 LPM CGA540 Regulator – Brass Insert – Fraction – DISS Fitting
RS-04-540-DISS-FRAC
Aluminum Regulator
0-4 LPM CGA870 Regulator – Brass Insert – Barb Outlet – Decimal
RS-04-870-BARB-DEC
Aluminum Regulator
0-8 LPM CGA870 Mini Regulator – Brass Insert – Barb Outlet
RM-08-870
Aluminum Regulator
0-15 LPM CGA870 Mini Regulator – Brass Insert – Barb Outlet
RM-15-870-DEC-BARB
Aluminum Regulator
0-15 LPM CGA540 Regulator - Brass Insert - Barb Outlet - DISS Fitting
REGMED54015B
Aluminum Regulator
0-15 LPM CGA540 Regulator - Brass Insert - MFL Outlet
REGMED54015F
Aluminum Regulator
0-25 LPM CGA870 Mini Regulator – Brass Insert – Barb Outlet
RM-25-870-BARB-DEC
RM-04-540-BARB-FRAC
60
MEDICAL OXYGEN REGULATORS
RM-15-870-BARB-DEC
REGMED54015F
REGMED54015B
[email protected] / 866-958-3473
MEDICAL REGULATORS
MEDICAL OXYGEN REGULATORS Type
Description
Part Number
Aluminum Regulator
0-4 LPM CGA870 Regulator – Brass Insert – Fractions
RS-04-870-FRAC
Aluminum Regulator
0-8 LPM CGA540 Regulator – Brass Insert – DISS Fitting – [BLUE PRVT LBL]
RS-08-540-DISS-DEC-BLPL
Aluminum Regulator
0-8 LPM CGA540 Regulator – Brass Insert – DISS Fitting – [GREEN PRVT LBL]
RS-08-540-DISS-DEC-GRPL
Aluminum Regulator
0-8 LPM CGA540 Regulator – Brass Insert – DISS Fitting
RS-08-540-DISS-DEC
Aluminum Regulator
0-8 LPM CGA870 Regulator – Brass Insert – Barb Outlet
RS-08-870-BARB-DEC
Aluminum Regulator
0-15 LPM CGA540 Regulator – Brass Insert – DISS Fitting
RS-15-540-DISS-DEC
Aluminum Regulator
0-25 LPM CGA540 Regulator – Brass Insert – DISS Fitting
RS-25-540-DEC-DISS
Integrated Valve Regulator
0-15 LPM CGA540 Fill Connection – 3/4” 16UNF - No DISS
OXYG-V-15-XX
Integrated Valve Regulator
0-15 LPM CGA540 - No DISS
RM200L-AL
Integrated Valve Regulator
0-25 LPM CGA540 - DISS 1240 - High Flow
RH200L-AL
OXYG-V-15-XX
61
MEDICAL OXYGEN REGULATORS
[email protected] / 866-958-3473
BEVERAGE Whether you operate a taproom, craft brewery, retail location or online store, All Safe Global’s complete line of brewing, kegging, and dispensing equipment gives you everything the discriminating beverage producer needs. Kegs Quality 304 stainless steel ball lock, pin lock, and Sankey kegs for home and commercial brewers alike. • NSF-approved beverage safe • Available in sizes for all applications, from 2.5 to 5 gallons and 1/6 to 1/4 barrels.
Gas Parts Manifolds, labels, and adapters for cylinder connections.
Dispensing Parts
• Durable rubber or steel bottoms (keg-dependent)
Faucets and components to deliver your finished product.
• Steel or rubber handles (keg-dependent)
Sankey Parts
Cylinders
Couplers, conversion parts, and components for Sankey keg connections.
The essential companion to our kegs or the ideal upgrade to your existing beverage system. All Safe Global is proud to offer high-quality, DOTapproved CO2 cylinders in lightweight aluminum or economical steel, with capacities from 2.5 lbs. to 100 lbs.
Keg Pumps
• New CO2-standard CGA 320 valve on every cylinder • Tanks meet or exceed all regulatory standards worldwide • Many larger cylinders are equipped with convenient carry handles • Choice of cap available • Ships unfilled; siphon tube not included • Contact us for up-to-the-minute cylinder availability
Beverage Kits and Parts Get started with the beverage of your choice with our convenient and affordable keg kits, or build, upgrade, or enhance a system with our complete selection of parts.
Keg Components Relief valves, posts, O-Rings, and more – the essentials for the care, repair,
62
and maintenance of your keg. High-quality disconnects, barbs, clamps, and tubes for easy liquid and gas handling.
BEVERAGE
Quality hand pumps for quick and easy beverage dispensing.
Keg Kits & Conversion Kits Available with or without gas cylinders, each NSF-certified food safe kit contains a keg, regulator, disconnects, and all necessary lines and clamps – everything needed to start producing today.
Kettles Professional-quality, 304 stainless steel brew kettles in sizes from 8 to 20 gallons.
Conversion Kits Make any refrigerator a beverage machine with our conversion kits. Available with or without CO2 cylinders.
Oxygenator Kit Precise oxygen injection for the serious home brewer. Tank, stainless wand, regulator, and lines included.
[email protected] / 866-958-3473
BEVERAGE KEGS
BALL LOCK KEGS Type
Description
Part Number
AMCYL
Ball Lock – 2.5 Gallon Keg – Single Handle
CKN25INX
AMCYL
Ball Lock – 2.5 Gallon Keg – Dual Rubber Handle
CKN25DRHINX
AMCYL
Ball Lock – 3 Gallon Keg – Single Handle
CKN3INX
AMCYL
Ball Lock – 3 Gallon Keg – Dual Rubber Handle
CKN3DRHINX
AMCYL
Ball Lock – 5 Gallon Keg – Single Handle
CKN5INX
AMCYL
Ball Lock – 5 Gallon Keg – Dual Rubber Handle
CKN5DRHINX
Type
Description
Part Number
AMCYL
New Pin Lock – 5 Gallon Keg – Dual Rubber Handle
CK2N-5DRHINX
AMCYL
New Pin Lock – 5 Gallon Keg – Single Handle
CK2N-5INX
PIN LOCK KEGS
CKN25INX
63
BALL LOCK & PIN LOCK KEGS
CKN25DRHINX
CKN3INX
CKN5INX
CKN5DRHINX
[email protected] / 866-958-3473
BEVERAGE KEGS
BALL LOCK KEGS Type
Description
Part Number
AEB
Ball Lock – 2.5 Gallon Keg – Single Handle
CKN25
AEB
Ball Lock – 2.5 Gallon Keg – Dual Rubber Handle
CKN25R
AEB
Ball Lock – 3 Gallon Keg – Single Handle
CKN3
AEB
Ball Lock – 5 Gallon Keg – Single Handle
CKN5
AEB
Ball Lock – 5 Gallon Keg – Dual Rubber Handle
CKN5R
AEB
Cleaning Tank – 18 Liter – 4 Beer Neck – Without Spear Tube
CT1
CKN25
64
BALL LOCK & PIN LOCK KEGS
CKN25R
CKN5
CT1
[email protected] / 866-958-3473
BEVERAGE
RECONDITIONED KEGS BALL LOCK & PIN LOCK KEGS Type
Description
Part Number
Varies
Reconditioned Ball Lock – 5 Gallon Keg – Processed – Dual Handle
CK1
Varies
Reconditioned Pin Lock – 5 Gallon Keg – Processed – Dual Handle
CK2
CK1
65
RECONDITIONED KEGS
CK2
[email protected] / 866-958-3473
BEVERAGE KEGS
SANKEY KEGS Type
Description
Part Number
AMCYL
1/6 Barrel Keg – Rubber Top & Bottom – Spear Tube D Type
KEG16STD-DRH
AMCYL
1/6 Barrel All Steel Keg – Spear Tube D Type
KEG16STD
AMCYL
1/4 Barrel Keg – Spear Tube D Type
KEG14STD
AMCYL
1/2 Barrel Keg – Spear Tube D Type
KEG12STD
Type
Description
Part Number
Multiple
Spear Tube A Type
ST-A
Multiple
Spear Tube S Type
ST-B
Multiple
Spear Tube G Type
ST-G
Multiple
Spear Tube D Type – “American Sankey”
ST-D
Multiple
Spear Tube U Type
ST-U
SANKEY KEGS SPEAR TUBE
KEG16STD
66
SANKEY KEGS & SPEAR TUBES
KEG14STD
KEG12STD
ST-D
[email protected] / 866-958-3473
BEVERAGE KEG PUMPS
SANKEY KEG PUMPS & COUPLERS
Type
Description
Part Number
Coupler
Sankey D Coupler – Blue Handle
SANKEYD1
Converter
Converter - Sankey Liquid Connection to Ball Lock Post
BLP-SANKEY-LIQ
Converter
Converter - Sankey Gas Connection to Ball Lock Post
BLP-SANKEY-GAS
Coupler
1/2” NPT Coupler, Stainless Steel
A-SSCOUPLER1
Pony Pump
Pony Pump – White Body – Hose and Faucet
PUMP1
Bronco Pump
Bronco Pump – Black Body – Lever Tap Handle – Hose and Faucet
PUMP2
Hand Pump
Stainless Steel 4" Hand Pump – Lever Tap Handle – Hose and Faucet
PUMP3
Hand Pump
4" Hand Pump – No Fittings with 3/4" 18 Thread
HND-PUMP-4-NF
Hand Pump
8" Hand Pump – No Fittings with 3/4" 18 Thread
HND-PUMP-8-NF
PUMP2
67
KEG PUMPS & COUPLERS
PUMP1
HND-PUMP-4-NF
SANKEYD1
[email protected] / 866-958-3473
BEVERAGE CYLINDERS
CO2 CYLINDERS
Size
Gas
Description
Part Number
2.5 lb.
CO2
2.5 lb. Aluminum – CGA320 Valve – 1800 PSI
25LBALVLV
5 lb.
CO2
5 lb. Aluminum – CGA320 Valve – 1800 PSI
5LBALVLV
10 lb.
CO2
10 lb. Aluminum – CGA320 Valve – 1800 PSI
10LBALVLV
10 lb.
CO2
10 lb. Aluminum – CGA 320 Valve – 1800 PSI – Carry Handle
10LBALVLV-H
15 lb.
CO2
15 lb. Aluminum – CGA320 Valve – 1800 PSI
15LBALVLV
20 lb.
CO2
20 lb. Aluminum – CGA320 Valve – 1800 PSI – Carry Handle
20LBALVLV
35 lb.
CO2
35 lb. Aluminum – CGA320 Valve – 1800 PSI – Carry Handle
35LBALVLV
50 lb.
CO2
50 lb. Aluminum – CGA320 Valve – 1800 PSI – Carry Handle or Cap
50LBALVLV
25LBALVLV
68
CO2 CYLINDERS
5LBALVLV
10LBALVLV
20LBALVLV
35LBALVLV
50LBALVLV
[email protected] / 866-958-3473
BEVERAGE CYLINDERS
NITROGEN / BEER MIX CYLINDERS
Size
Gas
Description
20 cu ft
Nitrogen / Beer Mix
20 cu ft Aluminum Cylinder – 2015 PSI – No Paint
20CUFTALVLV
22 cu ft
Nitrogen / Beer Mix
22 cu ft Aluminum – CGA580 Valve – 1800 PSI
22CUFTALVLV
30 cu ft
Nitrogen / Beer Mix
30 cu ft Aluminum – CGA580 Valve – 1800 PSI
30CUFTALVLV
60 cu ft
Nitrogen / Beer Mix
60 cu ft Aluminum – CGA580 Valve – 1800 PSI
60CUFTALVLV
20CUFTALVLV
69
CO2 & NITROGEN / BEER MIX CYLINDERS
Part Number
22CUFTALVLV
60CUFTALVLV
[email protected] / 866-958-3473
BEVERAGE REGULATORS
PRIMARY REGULATORS Type
Description
Part Number
CO2 Primary Regulator
High Performance Dual Gauge – No Shutoff – 0-50 PSI Range –
CO2REG-DUAL-X
Dual 60 lb. & 2000 lb. Gauges
CO2 Primary Regulator
High Performance – MFL Shutoff Installed – 0-50 PSI Range –
Dual 60 lb. & 2000 lb. Gauges
CO2 Primary Regulator
High Performance – 1/4 Shutoff Installed – 0-50 PSI Range –
Dual 60 lb. & 2000 lb. Gauges
CO2 Primary Regulator
High Perforformance – MFL Shutoff with 5/16" barb swivel –
0-50 PSI range – Dual 60 lb. & 2000 lb. Gauges
CO2 Primary Regulator
High Performance – Single 60 lb. Gauge – 5/16" Barb Outlet with Shutoff – 0-50 PSI Range
CO2REG-SINGLE-5/16BARB
CO2 Primary Regulator
High Performance – Single 60 lb. Gauge –
CO2REG-SINGLE-MFL-HP
MFL Outlet with Shutoff – 0-50 PSI Range
Nitrogen Primary Regulator
Nitrogen Primary Regulator – Dual Gauge – 5/16" Shutoff Installed –
0-50 PSI – 60 lb. & 3000 lb. Gauge
Nitrogen Primary Regulator
Nitrogen Primary Reg – Dual Gauge – 1/4" Shutoff Installed –
0-50 PSI – 60 lb. & 3000 lb. Gauge
Oxygen Regulator
Portable Oxygen Regulator with 1/4” Barb Output
CO2REG-DUAL-MFL
70
BEVERAGE REGULATORS
CO2REG-SINGLE-MFL-HP
CO2REG-DUAL-MFL CO2REG-DUAL-1/4BARB CO2REG-DUAL-M516
N2REG-DUAL-5/16BARB N2REG-DUAL-1/4BARB HB-OXY-REG2
N2REG-DUAL-5/16BARB
[email protected] / 866-958-3473
BEVERAGE
KEG COMPONENTS & PARTS KEG PARTS Type
Description
Part Number
Lid
Lid with Pressure Relief & Lid O-Ring
BLLN-A
Lid
Carbonation Lid with .5 mm Diffusion Stone
A-CARBLID-0.5DS
Lid Feet
Lid Closure Feet Cover
LCF
O-Ring
Universal Poppet O-Ring
PP-OR-U
O-Ring
Lid O-Ring
BEVORING-LOR
O-Ring
Dip Tube O-Ring
BEVORING-DTOR
O-Ring
Pin Lock Post O-Ring
BEVORING-PLPOST
O-Ring
Ball Lock-Post O-Ring
BEVORING-BLPOST
O-Ring Kit
Ball Lock 5 Piece O-Ring Kit
ORK-BL1
O-Ring Kit
Pin Lock 5 Piece O-Ring Kit
ORK-PL1
Poppet
Universal Poppet with Universal Spring
POPPET-AEP
Poppet
Cornelius Poppet
POPPET-CORN
Relief Ring
Pull Ring for Relief Valve
PULLRING
Relief Valve
Pressure Relief Valve – Ball Lock Lids
KPRVO
Relief Valve Assembly
Keg Pressure Relief Valve Assembly – Replaces ‘Dome’-Style Reliefs
KPRVA
Spring
Universal Poppet Spring
AE-SO
BLLN-A
71
KEG PARTS
LCF
POPPET-AEP
POPPET-CORN
[email protected] / 866-958-3473
BEVERAGE
KEG COMPONENTS & PARTS KEG PARTS & ACCESSORIES Type
Description
Part Number
Post
Ball Lock – Liquid Post – With O-Ring – No Poppet
BLPWPLIQ
Post
Ball Lock – Gas Post – With O-Ring – No Poppet
BLPWPGAS
Post
Ball Lock Posts for Pin Lock Conversion Gas & Liquid
BLPCONV
Post
Ball Lock Post for Pin Lock Conversion - Gas
BLPCONV-GAS
Post
Ball Lock Post for Pin Lock Conversion - Liquid
BLPCONV-LIQ
O-Ring
Pin Lock Post O-Ring
BEVORING-PLPOST
O-Ring
Ball Lock-Post O-Ring
BEVORING-BLPOST
Neoprene Jacket
Neoprene Keg Parka/Jacket for 5 Gallon (19L) Kegs
KPARKA1
Neoprene Jacket
Neoprene Keg Parka/Jacket for 2.5 Gallon (9L) Kegs
KPARKA2
BLPWPGAS
72
KEG PARTS & ACCESSORIES
KPARKA1
KPRVO
[email protected] / 866-958-3473
BEVERAGE
KEG COMPONENTS & PARTS KEG PARTS & ACCESSORIES Type
Description
Part Number
Disconnect
Ball Lock Quick Disconnect – Threaded – Liquid Connection – Short
BLDLIQT99
Disconnect
Ball Lock Quick Disconnect – Threaded – Gas Connection – Short
BLDGAST77
Disconnect
Ball Lock Quick Disconnect – Barbed – Gas Connection – Short
BLDGASB277
Disconnect
Ball Lock Quick Disconnect – Barbed – Liquid Connection – Short
BLDLIQB299
Disconnect
Pin Lock Quick Disconnect – Barbed – Gas Connection – Short
PLDGASB27-S
Disconnect
Pin Lock Quick Disconnect – Barbed – Liquid Connection – Short
PLDLIQB29-S
Disconnect
Pin Lock Quick Disconnect – Threaded – Liquid Connection – Long
PLDLIQT299
Disconnect
Pin Lock Quick Disconnect – Threaded – Gas Connection – Long
PLDGAST277
Disconnect
Stainless Steel Ball Lock Disconnect – Liquid (MFL)
BLDLIQMFL-SS
Disconnect
Stainless Steel Ball Lock Disconnect – Gas (MFL)
BLDGASMFL-SS
BLDGAST77
73
KEG PARTS & ACCESSORIES
BLDLIQB299
PLDLIQB29
PLDGAST277
BLDLIQMFL-SS
[email protected] / 866-958-3473
BEVERAGE
KEG COMPONENTS & PARTS KEG PARTS & ACCESSORIES
74
Type
Description
Part Number
Barb
1/4" Barb with Swivel 1/4" Nut Assembly
BRB-SWVL-1/4A
Barb
5/16" Barb with Swivel 1/4" Nut Assembly
BRB-SWVL-5/16A
Barbed Fitting
Stainless Steel Male Barbed Fitting 1/2” NPT
A-SS-FITTING-1
Barbed Fitting
Stainless Steel Female Barbed Fitting 1/2” NPT
A-SS-FITTING-2
Barbed Swivel
1/4” Barbed Swivel Hose Stem
BRB-SWVL-1/4-BARB
Barbed Swivel
Threaded Nut for 1/4” Barbed Swivel Hose Stem
BRB-SWVL-1/4-NUT
Barbed Swivel
5/16” Barbed Swivel Hose Stem
BRB-SWVL-5/16-BARB
Barbed Swivel
Threaded Nut for 5/16” Barbed Swivel Hose Stem
BRB-SWVL-5/16-NUT
Beer Nut
Beer Nut – 1 inch HEX
BNUT1
Beer Stem
Beer Stem – 1/4 inch MFL
BSTEM025MF
Beer Washer
Beer Washer – Sankey Conversion 1/2” I.D. x 13/16” O.D. x 1/8” Buna Duro 80
BWASH1
Clamp
Hose clamp – For 5/16" I.D. Tubing 7/32" to 5/8" worm gear
HOSECLAMP
Clamp
Hose clamp – For 3/16" I.D. Tubing 7/32" to 5/8" worm gear
HC316
Hex Nut
Stainless Steel 1” Hex Nut – Beer Thread (29/32-14)
BNUT2
Hose Clamp
12.5 mm Stepless Hose Clamp for 7/16” OD Gas Tubing
HOSECLAMP-ST1
Hose Clamp
10 mm Stepless Hose Clamp for 5/16” OD Gas Tubing
HOSECLAMP-ST2
Keg Lubricant
Keg Lubricant – Sanitary Gel Grease – 4 oz. Tube – NSF Approved
KEGLUBE
Pigtail Assembly
Ball Lock Liquid Pigtail Assembly – Ball Lock Quick Disconnect – Hose – Clamps
LIQ-PIGTAIL-BL
Pigtail Assembly
Ball Lock Gas Pigtail Assembly – Ball Lock Quick Disconnect – Hose – Clamps
GAS-PIGTAIL-BL
Shank
Shank for Refrigerator Conversion – 4 1/8” x 1/4” Bore – 1/4” Barb Inlet – Black Plastic Flange
SHANK1
Tubing
Liquid Tubing – 3/16” I.D. (5/16 O.D. 1/16 wall) 45 PSI – NSF Approved
T316IDLIQ
Tubing
Gas Tubing – 5/16” I.D. (7/16 O.D. 1/16 wall) 30 PSI – NSF Approved
T516IDGAS
Washer
Nylon Washer for Flare Fitting – Bevel 1/4” Washer
NWMFL1
KEG PARTS & ACCESSORIES
[email protected] / 866-958-3473
BEVERAGE
KEG COMPONENTS & PARTS DISPENSING & GAS PARTS Type
Description
Part Number
Faucet
Picnic Faucet – Black Plastic 1/4" Barb
PICNICFAUCET
Faucet
Brass Perlick Style Faucet – Short Shank (w/Nut, Tail, Collar)
FAUCET2
Faucet
Brass Perlick Style Faucet – Long Shank 100mm (w/Nut, Tail, Collar)
FAUCET3
Faucet
Beer Faucet with Stainless Steel Lever – Black Knob for Faucet
FAUCET-SS1
Faucet Adapter
Ball Lock Disconnect to Faucet Adapter
A-FADAPT1
Faucet Handle
Black Knob for Stainless Faucet – Compatible with SS1
FAUCETKNOB
Faucet Tower
Single Faucet Tower – 3" Diameter Stainless Steel Column – Stainless Steel Lever Faucet
TOWER1-SS
Faucet Tower
Double Faucet Tower – 3" Diameter Stainless Steel Column – Stainless Steel Lever Faucet
TOWER2-DFSS
Faucet Tower
Double Faucet Tower – 3" Diameter Stainless Steel Column – Brass Lever Faucet
TOWER3-DFSS
Faucet Tower
Single Faucet Tower Kit – Chrome-Plated Plastic Tower, Faucet, 13’ of 5 mm ID Liquid Line,
A-SFONTKIT
Stainless Steel Clamps, & Faucet Tool
Faucet Tower
Dual Faucet Tower Kit – Chrome-Plated Plastic Tower, Two Faucets, 26’ of 5 mm ID Liquid Line,
Stainless Steel Clamps, & Faucet Tool
Label
CO2 Label UN1013
CO2LABEL
Wrench
Combination Beverage Wrench – Spanner, Hex Nut, & Screw Drive Wrench for Faucet Installation
BEVWRENCH
PICNICFAUCET
75
FAUCETKNOB
DISPENSING & GAS PARTS
FAUCET-SS1
TOWER1-SS
A-DFONTKIT
TOWER2-DFSS
[email protected] / 866-958-3473
BEVERAGE
KEG COMPONENTS & PARTS DISPENSING & GAS PARTS Type
Description
Part Number
Adapter
Brass Adapter – CGA320 Cylinder to CGA580 Regulator
A1320580
Adapter
Brass Adapter – CGA580 Cylinder to CGA320 Regulator
A2580320
Adapter
Sodastream Adapter Hose – 36”
CO2 Charger Kit
Keg CO2 Charger Kit
CO2-CHRG-KIT1
Charger Cartridge
16 Gram CO2 Charger Cartridge/Bulb (threaded)
CO2-16GRAM
Charger Cartridge
74 Gram CO2 Charger Cartridge/Bulb (threaded)
CO2-74GRAM
Charger
Premium Regulated CO2 Charger w /Ball Lock fitting & Gauge
CO2-CHRG01
Charger Adapter
CO2 Cartridge Adapater for Mini Regulator - 74 g Cartridge to 16 g Charger
A-REG-ADAPT-1
Manifold
2-Way Manifold – 5/16" Barb Shutoff Outlet – 3/8" Barb Inlet
MAN2W516
Manifold
3-Way Manifold – 5/16" Barb Shutoff Outlet – 3/8" Barb Inlet
MAN3W516
Manifold
4-Way Manifold – 5/16” Barb Shutoff Outlet – 3/8” Barb Inlet
MAN4W516
Manifold
2-Way Manifold – 1/4” Barb Shutoff Outlet – 1/4” Barb Inlet
MAN2W14
Manifold
3-Way Manifold – 1/4” Barb Shutoff Outlet – 1/4” Barb Inlet
MAN3W14
Manifold
4-Way Manifold – 1/4” Barb Shutoff Outlet – 1/4” Barb Inlet
MAN4W14
Gauge Boot
Gauge Protection Boot – Fits Gauges 2 1/4" Diameter x 1 1/8" – Flexible PVC
GPB-01
Oxygen Wand
22" Stainless Steel Oxygen Dispensing Wand with Diffusing Stone
WANDOXY
MAN2W516
76
DISPENSING & GAS PARTS
MAN4W516
GPB-01
WANDOXY
[email protected] / 866-958-3473
BEVERAGE
KEG COMPONENTS & PARTS TUBING Type
Description
Part Number
Tubing
Liquid Tubing – 3/16” I.D. (5/16” O.D. 1/16” Wall) 45 PSI – NSF Approved
T316IDLIQ
Tubing
Liquid Tubing – 1/4” I.D. (7/16” O.D. 1/16” Wall) 45 PSI – NSF Approved
T14IDLIQ
Tubing
Gas Tubing – 5/16” I.D. (7/16” O.D. 1/16” Wall) 30 PSI – NSF Approved
T516IDGAS
Tubing
Liquid Tubing – 3/8” I.D. (1/2” O.D, 1/16” Wall) For Auto-Siphon Applications – NSF Approved
T38IDLIQ-Clear
Tubing
Liquid Tubing – 1/2” I.D. (5/8” O.D, 1/16” Wall) For Auto-Siphon Applications – NSF Approved
T12IDLIQ-Clear
Tubing
High-Temperature Liquid Tubing – 3/8” I.D. (1/2” O.D., 1/8” Wall) Black, Rated For Use Up To 200º C,
T38HTLIQ-Black
175 PSI Maximum Working Pressure at 73º C– NSF Approved
Tubing
High-Temperature Liquid Tubing – 3/8” I.D. (1/2” O.D., 1/8” Wall) White, Rated For Use Up To 200º C, T38HTLIQ-White
175 PSI Maximum Working Pressure at 73º C– NSF Approved
Tubing
High-Temperature Liquid Tubing – 1/2” I.D. (5/8” O.D., 1/8” Wall) Black, Rated For Use Up To 200º C,
175 PSI Maximum Working Pressure at 73º C– NSF Approved
Tubing
High-Temperature Liquid Tubing – 1/2” I.D. (5/8” O.D.) White, Rated For Use Up To 200º C,
175 PSI Maximum Working Pressure at 73º C– NSF Approved
T14IDLIQ
77
TUBING
T12IDLIQ-CLR
T12HTLIQ-Black T12HTLIQ-White
T516IDGAS
[email protected] / 866-958-3473
BEVERAGE
BREWING EQUIPMENT BREWING EQUIPMENT Type
Description
Part Number
Washer
Keg/Carboy/Parts Washer
KEGWASH1
Beer Gun
Stainless/ABS Composite Beer Gun
A-PG1
Thermometer
132mm Bi−Metal 3inch Dial Thermometer − Long Stem
A-THERM1
Thermometer
40mm Bi−Metal 3inch Dial Thermometer − Short Stem
A-THERM2
Bulkhead
Poly Bulkhead for 6.5mm Diameter Temperature Probe
A-TPROBE1
Heat Exchanger
20 Plate Wort Chiller / Heat Exchanger
A-HEATEX1
Fast Ferment
Fast Ferment Kit, 7.9 Gallons, with Screw Top, Wall Mount, Grommet, Air Lock, A-FFKIT1
Collection Ball, Valve, Wall Mount, Tubing, & Fittings
Fast Ferment
Fast Ferment Spare Collection Ball
A-CBALL1
Fast Ferment
Fast Ferment Carry Strap
A-CSTRAP-FF1
Fast Ferment
Fast Ferment Thermometer
A-THERM-FF1
Fast Ferment
Fast Ferment Metal Stand
A-STAND-FF1
Hop Spyder
Stainless Steel Hop Spyder for Brew Kettles and Fermenters
A-SPYDER1
KEGWASH1
78
BREWING EQUIPMENT
A-THERM1
A-TPROBE1
A-FFKIT1
[email protected] / 866-958-3473
BEVERAGE
BREWING EQUIPMENT BREWING EQUIPMENT Type
Description
Part Number
Auto-Siphon
Auto-Siphon & Racking Cane, 3/8” Connection
A-ASIPHON1
Beer Filtering
Beer Filtering System 10inch
A-FILTERSYS1
Beer Filtering
Washable Reinforced Filter 1 Micron Absolute
A-FILTER1
Chiller
25’ Stainless Steel Immersion Wort Chiller
A-CHILLER1
Cooling Coil
Stainless Steel Cooling Coil 16m
A-COIL1
Diffusion Stone
2 Micron Stainless Steel Diffusion Stone/Air Stone
A-DIFFST-2.0MIC
Diffusion Stone
0.5 Micron Stainless Steel Diffusion Stone
A-DIFFST-0.5MIC
Refractometer
Portable Refractometer with ATC (with SG Scale)
A-REFRACT1
Racking Cane
Stainless Steel Racking Cane, 30”
A-RCSS1
A-COIL1
79
BREWING EQUIPMENT
A-DIFFST-2.0MIC
A-REFRACT1
[email protected] / 866-958-3473
BEVERAGE
BREWING EQUIPMENT BREWING EQUIPMENT Type
Description
Part Number
Alcometer
Alcometer 0 to 100%
A-ALC-METER1
Air Pump
Wort Aerator − Air Pump Kit
A-PUMP-AIR1
Drive Pump
High Temperature Magnetic Drive Pump (1/2 BSP)
A-PUMP-MAG1
Drive Pump
High Temperature Micro 12v Direct Drive Brown Pump
A-PUMP-DRV1
Hydrometer Hydrometer
A-HYDRO1
Hydrometer
Thermohydrometer - Temperature-Compensated Hydrometer
A-THYDRO-A
Fermenter
30L Pail Fermenter − With Airlock, Temp Stick, Tap
A-FERMENT1
Growler
Growler – 2 Liter Capacity, Sprung Wire Lid
GROWL-U1
Growler
Ultimate Growler − 2 Liter Capacity, Vacuum Insulated, Screw Lid, Handle
GROWL-V2
Mash Paddle
Stainless Steel Mash Paddle
A-MASHP1
Test Kit
100 Strip PH Test Kit (PH 0−14)
A-PHKIT1
Test Kit
100 Strip Narrow-Range PH Test Kit (PH 3.8−5.4)
A-PHKIT2
Thermometer
LCD Thermometer Strip for Pail Fermenter
A-THERMS
A-MASHP1
80
BREWING EQUIPMENT
A-PHKIT2
A-HYDRO1
GROWL-U1
[email protected] / 866-958-3473
BEVERAGE
BREWING EQUIPMENT BREWING KETTLES & POTS Type
Description
Part Number
Pot Set
60L/40L Nested Aluminium Pot Set
A-POTSET1
Brew Kettle
8 Gallon Brew Kettle, Food-Grade 304 Stainless Steel
KETTLE-A8
Brew Kettle
10 Gallon Brew Kettle, Food-Grade 304 Stainless Steel, Silicone Handles
KETTLE-A10
Weldless 3-Piece Ball Valve, Weldless Port with Plug, Lid
Brew Kettle
15 Gallon Brew Kettle, Food-Grade 304 Stainless Steel, Silicone Handles
Weldless 3-Piece Ball Valve, Weldless Port with Plug, Lid
Brew Kettle
20 Gallon Brew Kettle, Food-Grade 304 Stainless Steel, Silicone Handles
Weldless 3-Piece Ball Valve, Weldless Port with Plug, Lid
Bazooka Screen
12inch/30cm Stainless Hop Bazooka Screen
A-POTSET1
81
BREWING KETTLES & POTS
KETTLE-A8
KETTLE-A15 KETTLE-A20 A-SCREEN1
KETTLE-A15
[email protected] / 866-958-3473
BEVERAGE KEGGING KITS
KEGGING KITS Type
Description
Part Number
Keg Kit 1
New 5 Gallon Ball-Lock Single Handle Keg – 5 lb. Aluminum CO2 Cylinder – Dual Gauge CO2 Regulator – Gas & Liquid Pigtails
KIT1-CKN5-5A-REG516C
Keg Kit 2
Used 5 Gallon Ball-Lock Keg – 5 lb. Aluminum CO2 Cylinder – Dual Gauge CO2 Regulator – Gas & Liquid Pigtails
KIT2-U5-5A-REG516C
Keg Kit 3
Used 5 Gallon Ball-Lock Keg – Dual Gauge CO2 Regulator – Gas & Liquid Pigtails – NO CO2 Cylinder
KIT3-U5-REG516C-NO CO2
Keg Kit 4
Used 5 Gallon Ball-Lock Keg – 7 lb. Steel CO2 Cylinder – Dual Gauge CO2 Regulator – Gas & Liquid Pigtails
KIT4-U5-7S-REG516C
Keg Kit 5
Used Pin-Lock Keg – 5 lb. Aluminum CO2 Cylinder – Dual Gauge CO2 Regulator – Gas & Liquid Pigtails
KIT5-CK2-5A-REG516C
Keg Kit 6
New 3 Gallon Ball-Lock Keg – 5 lb. Aluminum CO2 Cylinder – Dual Gauge CO2 Regulator – Gas & Liquid Pigtails
KIT6-CKN3-5A-REG516C
Keg Kit 7
Used 5 Gallon Pin-Lock Keg – Dual Gauge CO2 Regulator – Gas & Liquid Pigtails
KIT7-CK2-REG516C-NO CO2
Keg Kit 8
N2 Pro – New 5 Gallon Ball-Lock Keg – 22 cu ft Aluminum Nitrogen Cylinder – Dual Gauge CO2 Regulator
KIT8-N5-22CU-REG516N
KIT1-CKN5-5A-REG516C
82
KEGGING KITS
KIT2-U5-5A-REG516C
[email protected] / 866-958-3473
BEVERAGE KEGGING KITS
KEGGING KITS Type
Description
Part Number
Oxygenator Kit
Oxygenator Kit – Steel Cylinder – Oxygen Regulator and Wand
KIT-OXYBEV1
Sankey Conversion Kit
Sankey Only – Refrigerator Conversion Kit – No CO2
KIT-C1
Sankey Conversion Kit
Sankey Only – Refrigerator Conversion Kit – 5lb CO2
KIT-C2-5A
Multi Conversion Kit
Universal Refrigerator Conversion Kit – Ball Lock and Sankey Connections – 5 lb CO2
KIT-CONV-U2-5A
Multi Conversion Kit
Parts Conversion Kit – Converts Sankey to Ball Lock Connections
PART-CONVKIT1-BL
Multi Conversion Kit
Universal Refrigerator Conversion Kit – Ball Lock and Sankey Connections – No CO2 Tank
KIT-CONV-U1
Shank Tailpiece
Shank Tailpiece for 1/4” ID Hose, Chrome Plated
SHANK-TAIL14C
Shank Tailpiece
Shank Tailpiece for 1/4” ID Hose, Stainless Steel
SHANK-TAIL14SS
Shank Tailpiece
Shank Tailpiece for 3/16” ID Hose, Chrome Plated
SHANK-TAIL316C
Shank Tailpiece
Shank Tailpiece for 3/16” ID Hose, Stainless Steel
SHANK-TAIL316SS
Shank Tailpiece
Shank Tailpiece for 5/16” ID Hose, Stainless Steel
SHANK-TAIL516C
Shank Tailpiece
Shank Tailpiece for 5/16” ID Hose, Chrome Plated
SHANK-TAIL516SS
KIT-OXYBEV1
83
KEGGING KITS
KIT-C2-5A
PART-CONVKIT1-BL
[email protected] / 866-958-3473
SCBA & LIFE SAFETY When performance and reliability are life-saving essentials, All Safe Global has you covered. Our complete line of SCBA cylinders and valves and our full range of fire extinguishers provide unmatched safety when you need it most, with exceptional quality at an affordable price. SCBA Cylinders and Valves • Light and Strong: All SCBA cylinders feature high-performance composite construction • Extended Certification: All SCBA cylinders feature a minimum 15 year service life before recertification; several are available with an extraordinary 30 year interval. • Fit to Your Needs: Cylinders are available in all standard configurations – including Scott, MSA, and ISI/Survivair types – in 30 and 45 minute capacities, and in 2216 and 4500 PSI configurations. Valves are available in types, pressure ratings, handle placements, and outlet styles to fit your system exactly. • Valves and cylinders sold separately • Cylinders ship unfilled • Contact us for up-to-the-minute cylinder and valve availability
Fire Extinguishers For fire safety in any situation, we provide a complete range of extinguisher types and capacities. ABC, CO2, Halotron, and Class K extinguishers are available, in sizes from 2.5 to 20 lbs. A variety of brackets and cabinets for secure storage are also available; please contact your All Safe Global representative for details.
84
SCBA & LIFE SAFETY
[email protected] / 866-958-3473
SCBA & LIFE SAFETY CYLINDERS
CGA Fitting by Gas Service see page 4
SCBA CYLINDERS Type
Description
Part Number
15 Year Cylinder
SCBA – 30 Minute – 2216 PSI – Standard Composite – Scott Type – No Valve – 15 yr
SCBA-SC-30-2216-G
15 Year Cylinder
SCBA – 30 Minute – 2216 PSI Standard Composite – MSA Type – No Valve – 15 yr
SCBA-SC-30-2216-MSA
15 Year Cylinder
SCBA – 30 Minute – 4500 PSI Standard Composite – Scott/MSA Type – No Valve – 15 yr
SCBA-SC-30-4500-A
15 Year Cylinder
SCBA – 30 Minute – 4500 PSI Standard Composite – ISI/Survivair Type – No Valve – 15 yr
SCBA-SC-30-4500-B
15 Year Cylinder
SCBA – 45 Minute – 4500 PSI Standard Composite – Scott/MSA Type – No Valve – 15 yr
SCBA-SC-45-4500-A
30 Year Cylinder
SCBA – 45 Minute – 4500 PSI Standard Composite – Scott/MSA Type – No Valve – 30 yr
SCBA-SC-45-4500-A-30
30 Year Cylinder
SCBA – 45 Minute – 4500 PSI Standard Composite – ISI/Survivair Type – No Valve – 30 yr
SCBA-SC-45-4500-B-30
Aluminum Cylinders For Aluminum 3AL SCBA Cylinders Contact your All Safe Global Representative DuraLite Cylinders
Call 866-958-3473
For Dura Lite 15 Year Composite SCBA Cylinders Contact your All Safe Global Representative Call 866-958-3473
Cylinders types available for Draeger, Interspiro, ISI, Sperian, Survivair, MSA, and Scott type systems. For medical cylinders see pages 56–57.
SCBA-SC-30-2216-G
85
SCBA CYLINDERS
SCBA-SC-45-4500-A-30
[email protected] / 866-958-3473
SCBA & LIFE SAFETY VALVES
CGA Fitting by Gas Service see page 4
SCBA VALVES Type
Description
Part Number
Generic
Generic SCBA Valve, 2216 PSI with 180° Outlet
S-2216-180-GEN
Generic
Generic SCBA Valve 3000 PSI
S-3000-GEN
Generic
Generic SCBA Valve 4500 PSI with 180° Outlet
S-4500-180-GEN
Interspiro
Interspiro Type SCBA Valve, 2216 PSI, Diamond-Shaped Non-Locking Handle
S-2216-INTER-DIA
Interspiro
Interspiro Type SCBA Valve, 4500 PSI, Diamond-Shaped Non-Locking Handle
S-4500-INTER-DIA
Scott
Scott Type SCBA Valve, 4500 PSI, w/Tri-Lobed Locking Handle & Clip
S-4500-SCOTT-TRI
Scott
Scott Type SCBA Valve, 2216 PSI, w/Tri-Lobed Locking Handle & Clip
S-2216-SCOTT-TRI
Scott
Scott Type SCBA Valve, 4500 PSI, w/Round Locking Handle & Clip
S-4500-SCOTT-RD
Scott
Scott Type SCBA Valve, 2216 PSI, w/Round Locking Handle & Clip
S-2216-SCOTT-RD
Draeger
Draeger Type SCBA Valve, 4500 PSI, 90° Outlet w/Locking Handle
S-4500-90-DRAEGER
Draeger
Draeger Type SCBA Valve, 2216 PSI, 90° Outlet w/Locking Handle
S-2216-90-DRAEGER
S-4500-90-DRAEGER
86
SCBA VALVES
[email protected] / 866-958-3473
SCBA & LIFE SAFETY FIRE EXTINGUISHERS
DRY CHEMICAL FIRE EXTINGUISHERS Size
Description
Part Number
2.5 lb.
Dry Chemical 2.5 lb. ABC Extinguisher with Vehicle Bracket
B250M
5 lb.
Dry Chemical 5 lb. ABC Extinguisher with Wall Hook
B5M
10 lb.
Dry Chemical 10 lb. ABC Extinguisher with Wall Hook
B10M
20 lb.
Dry Chemical 20 lb. ABC Extinguisher with Wall Hook
B20M
Size
Description
Part Number
5 lb. CO2
5 lb. CO2 Fire Extinguisher
B5V
10 lb. CO2
10 lb. CO2 Fire Extinguisher
B10V
15 lb. CO2
15 lb. CO2 Fire Extinguisher
B15V
20 lb. CO2
20 lb. CO2 Fire Extinguisher
B20V
CO2 FIRE EXTINGUISHERS
B250M
87
B5M
DRY CHEMICAL & CO2 FIRE EXTINGUISHERS
B10M
B20M
EXTMOUNT
[email protected] / 866-958-3473
SCBA & LIFE SAFETY VALVES
HALOTRON FIRE EXTINGUISHERS Size
Description
Part Number
2.5 lb.
2.5 lb. Halotron Extinguisher with Wall Hook
2.5HAB
5 lb.
5 lb. Halotron Extinguisher with Wall Hook
5HAB
11 lb.
11 lb. Halotron Extinguisher with Wall Hook
11HAB
15 lb.
15.5 lb. Halotron Extinguisher with Wall Hook
15HAB
CLASS K FIRE EXTINGUISHERS Type
Description
Part Number
Class K
Class K 6 Liter Extinguisher with Wall Hook & Signage
WC100
Size
Description
Part Number
2.5 Gallon
2.5 Gallon Water Extinguisher with Wall Hanger
WP61
WATER EXTINGUISHERS
We carry a wide variety of brackets and cabinets. Ask your All Safe Global represenative for more details.
WC100
88
WP61
HALOTRON, CLASS K, & WATER FIRE EXTINGUISHERS
11HAB
[email protected] / 866-958-3473
CYLINDER SERVICES All Safe Global is one of the largest DOT cylinder service centers in the U.S. With over 37 years in the business, we have the experience, technical knowledge, and attention to detail necessary for exceptional cylinder service. We offer testing and visual inspection to re-certify high- and low-pressure cylinders as well as a full range of reconditioning services. A full list of our services is found below. Hundreds of thousands of cylinders pass through our testing and reconditioning facility every year, so you can count on us to be your cylinder resource. We also understand your need for a quick turn-around on orders. Our cylinder service operates daily, so your cylinders will always be ready when you need them. To provide the most efficient service possible, we have our own fleet of commercial vehicles delivering regularly, and have great freight rates for areas outside of our normal delivery area.
Hydrostatic Testing
Aluminum Cylinder Cleaning/Label Removal
The industry standard method of requalifying (recertifying) compressed and packaged gas cylinders, to determine whether they are safe for continued use. Testing includes an in-depth visual examination of the cylinder’s interior and exterior and a water pressure test.
Aluminum oxygen cylinders can be made to look nearly new again. Our proprietary cleaning process and cylinder shoulder painting is a lower-cost alternative to completely refurbishing the cylinder. The process is usually performed when a cylinder in need of recertification is already in our facility.
Hydrostatic testing is required by the Department of Transportation for refrigerant cylinders, SCUBA tanks, SCBA tanks, aircraft cylinders, fire extinguisher cylinders, beverage (CO2) cylinders, and common compressed gas cylinders, including oxygen, argon, helium, nitrogen, hydrogen, air, nitrous oxide, and others.
Propane Recertification
Aluma Furb This fantastic refurbishing process refinishes and clear coats your aluminum cylinder. When coupled with a hydrostatic test (recertification), Aluma Furb is a very cost-effective alternative to purchasing new cylinders, bringing your cylinder back to “like new" condition for half the price!
89
CYLINDER SERVICES
Recertification of propane and LP gas cylinders is due 12 years after the original manufacturer date and every 5 years thereafter. In addition to recertifying your propane cylinders, we can shot-blast and repaint reconditionable cylinders.
Cylinder Exterior Blasting and Painting All Safe Global uses cylinder-blasting machines to remove all paint, scale, and exterior contaminants from the cylinder. The cylinder is left with an ideal surface for applying an exterior coating.
[email protected] / 866-958-3473
CYLINDER SERVICES Internal Shot Blasting (ISB)
Cylinder Stenciling, Embossing and Neck Rings
ISB is the most effective method for removing rust and corrosion from inside steel cylinders. It obsoletes the older method of cylinder tumbling.
We can stencil or stamp your name on your cylinders, and replace or retighten neck rings.
Cylinder Exterior Blasting and Painting
CO2 Cylinder Filling
All Safe Global uses cylinder-blasting machines to remove all paint, scale, and exterior contaminants from the cylinder. The cylinder is left with an ideal surface for applying an exterior coating.
All Safe Global can fill any CO2 cylinder, including filling purchased cylinders prior to shipping. Contact your representative for details.
LPG /PROPANE CYLINDERS & SERVICES Type Number
90
5 lb. – Blast/Paint/Recertify/Valve-Install
BPR-5
10 lb. Tall – Blast/Paint/Recertify/Valve-Install
BPR-10
10 lb. Pancake – Blast/Paint/Recertify/Valve-Install
BPR-10P
11.5 lb. Blast – Blast/Paint/Recertify/Valve-Install
BPR-11.5
20 lb. – Blast/Paint/Recertify/Valve-Install
BPR-20
30 lb. – Blast/Paint/Recertify/Valve-Install
BPR-30
33.5 lb. – Blast/Paint/Recertify/Valve-Install
BPR-33.5
Forklift Gauge Replacement – SHOP RATE
FRK-GA
40 lb. – Blast/Paint/Recertify/Valve-Install
BPR-40
43 lb. – Blast/Paint/Recertify/Valve-Install
BPR-43
50 lb. – BBlast/Paint/Recertify/Valve-Install
BPR-50
60 lb. – BBlast/Paint/Recertify/Valve-Install
BPR-60
100 lb. – Blast/Paint/Recertify/Valve-Install
BPR-100
5 lb. – CO2 Cylinder Fill
RC05H
10 lb. – CO2 Cylinder Fill
RC10H
15 lb. – CO2 Cylinder Fill
RC15H
20 lb. – CO2 Cylinder Fill
RC20H
CYLINDER SERVICES
[email protected] / 866-958-3473
CYLINDER SERVICES REFRIGERANT SERVICES Type Number 30 to 50 lbs.
REFRIG-HYDRO-30
51 to 990 lbs.
REFRIG-HYDRO-50
1000 lbs.
REFRIG-HYDRO-1000
MEDICAL SERVICES E SIZE & SMALLER Type Number Hydrotest & Recertification
MED-HYDRO
Teflon O-Ring (required)
T-ORING
870AY NO TOGGLE Installed End of Line
870AY-SHER
Alumafurb/Clear Coat/Paint Dome
ALUMAFURB
Label Removal & Clean
LRC
INDUSTRIAL SERVICES 20 CU FT TO 585 CU FT Type Number Hydro HYDRO Valve VALVESINSTALLED
91
Blast / Paint
BP
Label Removal
LRC
CYLINDER SERVICES
[email protected] / 866-958-3473
TERMS AND CONDITIONS ATTENTION: PLEASE READ THESE TERMS CAREFULLY BEFORE USING THIS CATALOG OR ORDERING PRODUCT. USING THIS CATALOG INDICATES THAT YOU ACCEPT THESE TERMS. IF YOU DO NOT ACCEPT THE TERMS NOTED HEREIN, DO NOT USE THIS CATALOG.
order quantity requirements. Items ordered outside of these specific quantities may be priced at different levels. All Safe Global may ship partial orders and adjust orders to meet the nearest quantity break for a specific price. Payment
Applicability A sales order document denoting pricing, quantities, Customer’s name, delivery details, Terms and Conditions of sale and other pertinent information is generated by the Seller for each sales transaction (“Sales Order”). The Terms and Conditions on the Sales Order (referred to here as “Terms” or “Agreement”) are the only terms that govern the sale of the goods (“Goods”) by All Safe Global, Inc., American Cylinder, Inc. (d/b/a All Safe and All Safe Global) (collectively; ”Seller”) to the Customer. The customer is the user of this catalog and/or Buyer of Goods (“Customer”). These Terms prevail over any general terms and conditions of purchase submitted by Customer. Customer is subject to the terms of use of this Catalog. Ordering All Safe Global, is regularly open for business Monday through Friday, 7:30AM – 4:00PM CST. Phone orders may be placed during business hours at (866) 958-3473. Fax orders may be submitted to (651) 408-7163. Online orders should be submitted via email to
[email protected].
92
All Safe Global accepts payment via commercial check, wire transfer, or ACH. We also accept Visa, MasterCard, American Express, and Discover cards. Credit card purchases are subject to a 4% processing fee. Accounts seeking Net 30 terms are subject to credit approval and must submit a credit request with references in writing. Payments must be received in advance for orders placed on accounts without open terms. Past-due invoices may delay the release of pending shipments. Customer will pay interest on all late payments at the lesser of the rate of 1.5% per month or the highest rate permissible under applicable law, calculated daily and compounded monthly. Customer will reimburse Seller for all costs incurred in collecting any late payments, including, without limitation, attorneys’ fees. In addition to all other remedies available under these Terms or at law (which Seller does not waive by the exercise of any rights hereunder), Seller will be entitled to suspend the delivery of any Goods if Customer fails to pay any amounts when due hereunder. Customer will not withhold payment of any amounts due and payable by reason of any set-off of any claim or dispute with Seller, whether relating to Seller’s breach, bankruptcy or otherwise.
Minimum Orders
Shipping Terms
All Safe Global requires minimum order amounts for certain products and specific quantities to be purchased of certain items to receive designated pricing. Contact your sales representative for details. Orders of those products that do not meet the minimum are subject to a $25 service fee and higher pricing. The $25 minimum order fee will be added to the total invoice amount. Prices provided in this document or in supplements reflect specific
While most items ship within 24 to 48 hours of order processing, the standard lead time on build-to-stock items is 5 to 10 business days, not including transit time. Lead time on non-stock items, special orders, and other items may vary. Seller typically delivers Goods FCA Seller’s facility in Wyoming, Minnesota (INCOTERMS 2010) (the “Delivery Point”) using Seller’s standard methods for packaging and shipping such Goods unless otherwise specified in
TERMS AND CONDITIONS
[email protected] / 866-958-3473
TERMS AND CONDITIONS the Sales Order. The cost of shipping and insurance (if requested by Customer) will be prepaid by Seller and added to the invoice of Goods. Customer-arranged freight is subject to administrative and handling fees. All Safe Global’s normal dock hours are Monday through Friday, 7:00am to 2:30pm CST. Completed orders received before 2:00 p.m. CST will generally be processed on the same business day. Orders received after 2:00 p.m. CST will generally be processed on the next business day. All requests for same day shipping must be received before 12:00 p.m. CST. Same-day shipping may not be available. Title and Risk of Loss Title and risk of loss passes to Customer upon delivery of the Goods at the Delivery Point. As collateral security for the payment of the purchase price of the Goods, Customer hereby grants to Seller a lien on and security interest in and to all of the right, title and interest of Customer in the Goods, wherever located, and whether now existing or hereafter arising or acquired from time to time, and in all accessions thereto and replacements or modifications thereof, as well as all proceeds of the foregoing. The security interest granted under this provision constitutes a purchase money security interest under the Minnesota Uniform Commercial Code. Order Cancellation Any order placed for same day shipping may not be cancelled or changed. All standard lead time orders require a minimum of 24 hours between the scheduled ship date and notice of cancellation. Staged or loaded merchandise may be subject to a 15% to 25% restocking fee at Seller’s discretion. Sales of custom and special order merchandise are final and may not be cancelled and merchandise may not be returned.
receipt (”Inspection Period”). Customer will be deemed to have accepted the Goods unless it notifies Seller in writing of any Nonconforming Goods during the Inspection Period and furnishes such written evidence or other documentation as reasonably required by Seller. “Nonconforming Goods” means only the following: (i) product shipped is different than identified in Customer’s purchase order; or (ii) product’s label or packaging incorrectly identifies its contents. If Customer timely notifies Seller of any Nonconforming Goods, Seller will, in its sole discretion, (i) replace such Nonconforming Goods with conforming Goods, or (ii) credit or refund the Price for such Nonconforming Goods, together with any reasonable shipping and handling expenses incurred by Customer in connection therewith. Customer will ship, at its expense and risk of loss, the Nonconforming Goods to Seller’s facility located in Wyoming, Minnesota. If Seller exercises its option to replace Nonconforming Goods, Seller will, after receiving Customer’s shipment of Nonconforming Goods, ship to Customer, at Customer’s expense and risk of loss, the replaced Goods FCA Delivery Point. Customer acknowledges and agrees that the remedies set forth in Section 4(b) are Customer’s exclusive remedies for the delivery of Nonconforming Goods. Customer is responsible for checking orders upon delivery to ensure that they are complete and undamaged. If your shipment arrives damaged or shows evidence of tampering, notify the carrier immediately in writing and note any discrepancies on all copies of your delivery paperwork. Customers can partially accept, or refuse, damaged or tamper-evident shipments. Claims against the carrier for damage or loss should be initiated with the carrier by the receiver. All Safe Global has no recourse to file claims against carriers for shipments delivered freight collect or those signed for as received in good condition.
Inspection and Rejection of Nonconforming Goods Customer will inspect the Goods within two business days of
93
TERMS AND CONDITIONS
[email protected] / 866-958-3473
TERMS AND CONDITIONS Warranty and Returns Products manufactured by a third party (”Third Party Product”) constitute substantially all of the Goods. The SELLER MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE GOODS, INCLUDING ANY (i) WARRANTY OF MERCHANTABILITY; (ii) WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE; OR (iii) WARRANTY AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OF A THIRD PARTY, WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. Seller warrants to Customer that for a period of 30 days from the date of shipment of the Goods (“Valve Service Warranty Period”), that any valve installation services performed by Seller will be free from material defects in workmanship. In case of breach of the warranty in this Section, Seller will, in its sole discretion, either: (i) repair or replace such Goods (or the defective part) or (ii) credit or refund the price of such Goods at the pro rata contract rate provided that, if Seller so requests, Customer will, at Seller’s expense, return such Goods to Seller. THE REMEDIES SET FORTH IN SECTION SHALL BE THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY AND SELLER’S ENTIRE LIABILITY FOR ANY BREACH OF THE (continued over)LIMITED WARRANTY SET FORTH IN THIS SECTION. Some products may have manufacturer’s warranties provided by the manufacturer. For questions about manufacturer’s warranties contact your All Safe Global representative. Before any item is returned to All Safe Global, for any reason, a Return Material Authorization number must be obtained from our Customer Service Department. Availability and Pricing
purchase the Goods from Seller at the price(s) (the “Price(s)”) set forth in the Sales Order. The Price, and all prices, are Seller’s confidential information and will not be disclosed to any third party by the Customer. Unless otherwise stated on the Sales Order, all Prices are stated in US dollars and do not include shipping, transportation, storage, special packaging or services, insurance, sales, use and excise taxes, and any other similar taxes, duties and charges of any kind imposed by any Governmental Authority on any amounts payable by Customer. Customer will be responsible for all such charges, costs and taxes; provided, that, Customer will not be responsible for any taxes imposed on, or with respect to, Seller’s income, revenues, gross receipts, personnel or real or personal property or other assets. Catalog Content All content and materials contained in the Catalog are the property of Seller. Any use or reuse of this content without expressed written permission of Seller is strictly prohibited. Permission to otherwise reprint or electronically reproduce any page in part or in its entirety is expressly prohibited unless prior written consent has been obtained. All Rights Reserved © 1999–2016 American Cylinder, Inc. Seller and its affiliates do not make any representations or warranties as to accuracy of the information in this Catalog. Customer should not rely on the information in this Catalog to determine the appropriate product, service or procedure for use in your application. The Customer, and/or user of any products or services from All Safe, is strictly responsible for ensuring their safe usage and that the products meet all applicable safety requirements and government regulations that may apply.
Availability and prices are subject to change without notice. All Safe Global reserves the right to amend quoted prices and minimum quantities on parts and/or components. Customer will
94
TERMS AND CONDITIONS
[email protected] / 866-958-3473
TERMS AND CONDITIONS Limitation of Liability IN NO EVENT SHALL SELLER BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOSS OF USE, REVENUE OR PROFIT, OR FOR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR PUNITIVE DAMAGES WHETHER ARISING OUT OF BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, REGARDLESS OF WHETHER SUCH DAMAGES WERE FORESEEABLE AND WHETHER OR NOT SELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND NOTWITHSTANDING THE FAILURE OF ANY AGREED OR OTHER REMEDY OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL SELLER’S AGGREGATE LIABILITY ARISING OUT OF OR RELATED TO THIS AGREEMENT, WHETHER ARISING OUT OF OR RELATED TO BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, EXCEED THE TOTAL OF THE AMOUNTS PAID TO SELLER FOR THE GOODS SOLD HEREUNDER. In no event will Seller be liable for any damages whatsoever (including, without limitation, those resulting from lost profits, lost data, business interruption or human injury) arising out of the use, inability to use, or the results of use of this Catalog, any websites linked to this Catalog, or the materials or information or services contained herein or at any or all such websites, whether based on warranty, contract, tort or any other legal theory and whether or not advised of the possibility of such damages. If your use of the materials, information or services from this Catalog results in the need for servicing, repair, medical attention or correction of equipment or data, you assume all costs thereof. This Catalog does not provide legal advice and visitors should refer any such questions to a qualified Attorney. Furthermore, Seller makes no representations or warranties regarding the condition or functionality of websites it may link to, their suitability for use, or that these links will be uninterrupted. Applicable law may not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may be limited by law and in such cases should be interpreted to be enforced to the
95
TERMS AND CONDITIONS
full extent allowed by law. Warning; Customer’s Duty to Warn; Indemnification of Seller Compressed gas equipment is dangerous and poses a risk of explosion, fire, suffocation, poisoning, extreme temperature, crushing and related injuries. Misuse, using the wrong equipment, or using equipment under unsafe conditions can result in bodily injury, and/or death. Customer alone is responsible for determining what equipment to use. Customer acknowledges that Seller does not customarily affix to Goods warnings labels that set forth hazards related to use of Goods themselves or intended contents (“Product Warnings”), because, as Customer hereby acknowledges, Seller is not aware of the ultimate use of Goods or contents with which Goods will be filled. Customer further acknowledges that Customer has a duty to warn end-users about dangers inherent in filling and using high-pressure gas cylinders, including a duty to warn end-users about dangers related to filling cylinders with certain gases (including those designated as hazardous substances), and that Seller has no such duty. Customer will be solely responsible for, and assumes all obligations for and liability associated with, determining the use of Goods and the foreseeable maintenance and refilling risks, as well as affixing to Goods all appropriate warning labels, including those warning labels required by law and any appropriate Product Warnings. Customer will defend, indemnify and hold Seller harmless against all claims and losses arising out of or related to (i) failure or alleged failure to provide or affix warning labels, including Product Warnings, on Goods, (ii) any deficiencies in warning labels provided or affixed to Goods, or (iii) Seller’s act of providing or/and affixing warning labels to Goods in accordance with Customer’s specifications, including causes of action in negligence, tort, product liability, strict liability or warranty.
[email protected] / 866-958-3473
ALL SAFE GLOBAL, INC. Freight & Service Center Location 26443 Fallbrook Avenue Wyoming, MN 55092 Walk-In Sales & CO2 Fills 26453 Fallbrook Avenue Wyoming, MN 55092 Website: www.allsafe.net Toll Free: 866-958-3473 Fax: 651-408-7163
