New Fmx11 Hax 6x4 Rigid Air Ride

Transcript

Volvo Trucks. Driving Progress New FMx11 HAX 6x4 Rigid Air Ride - Construction/Heavy Construction FM 64 R1HAX 2989 ,945 Cab 2490 Chassis Dimensions [mm] WB Wheelbase 3200 3400 3700 3900 4600 A D N N Overall Chassis Length Centre of rear axle to front of body Rear Overhang (Min) Rear Overhang (Max) 7865 2603 1225 1775 8165 2803 1225 1875 8615 3103 1225 2025 8915 10015 10465 3303 4003 4303 1225 1225 1225 2125 2525 2675 T Y Y W W Theoretical Wheelbase Centre of Gravity for Payload (Min) Centre of Gravity for Payload (Max) Body Length (Min) Body Length (Max) 3885 -278 -278 5762 5762 4085 -261 -261 6127 6127 4385 -234 -234 6674 6674 4585 -215 -215 7035 7035 5285 -157 -157 8320 8320 4900 5585 -136 -136 8877 8877 Chassis Weights [kg] Front Axle Rear Bogie Kerb Weight Payload (including body, driver, fuel etc) 4680 4695 4710 4715 4760 4785 3720 3735 3755 3760 3835 3860 8400 8430 8465 8475 8595 8645 12600 12570 12535 12525 12405 12355 Turning Diameter [mm] Turning Circle Diameter Kerb to Kerb Turning Circle Diameter Wall to Wall Plated Weights [kg] Gross Vehicle Weight Gross Combination Weight Front Axle Rear Bogie 13900 14500 15400 16000 18200 19100 15400 16000 16900 17500 19700 20600 Plated Design 21000 44000 6000 15000 27500 44000 6500 21000 Important Notes Chassis Dimensions Cab Height: +416 mm for CAB-HSLP, +554 mm for CAB-XHSL. Front Axle to Back of Cab: +399 mm for CAB-HSLP and CAB-SLP and CABXHSL. D-measure includes a front clearance of 50 mm and for rigid trucks also a subframe of 100 mm. Height can vary ± 20 mm for leaf and ± 10 mm for air suspension. All dimensions are for unladen chassis and any tag axles down. Chassis height used: CHH-HIGH. Rear overhang used for vehicle weight calculation is the maximum rear overhang (N Max) for selected wheelbase. Height change when chassis height CHH-MED,FRAME300: -60 mm. Weight and dimensions are based upon the following tyres: Front Axle Tyres: 295/80R22.5 Drive Axle Tyres: 295/80R22.5 Chassis weight includes oil, water, AdBlue, 70 litres fuel and without driver. Kerb weight can vary ± 3%. Turning diameters are theoretically calculated. Legal weights can differ from country to country. For more detailed weight information, including optional equipment weights, ask your Volvo sales contact to enter your specification into the Volvo Weight Information system (WIS). Do NOT use this drawing for bodybuilding. Refer to Volvo Bodybuilder Instructions and chassis assembly drawing FM64R1HAX. 1 (4) Ref: FM 64 R1HAX16 NZL 2014-09-18 ENGAU New FMx11 HAX 6x4 Rigid Air Ride - Construction/Heavy Construction FM 64 R1HAX Truck use □ EXST-SSP Polished stainless steel exhaust stack ■ RC-ROUGH Operating class on/off road □ TBC-NZL Trailer brake connections (suzi coils) □ TIPP-PRE ■ UNIFORM Tipper preparation Basic uniform vehicle □ TRBR-HCR □ TRBR-STA Hand controlled trailer brake, reduced pressure Stationary trailer brake control Core components □ TRB-STRE Automatic trailer brake activation (stretch brake) ■ FMX-DAY □ FMX-SLP Day cab Sleeper cab □ ATANK-AL Aluminium airtanks ■ EU5SCR-M ■ TL-LED LED tail lights Eu5 SCR Selective Catalytic Reduction ( mandatory ) □ ■ □ □ Eu5 SCR engine, 11C litre, 330 hp, 1600 Nm Eu5 SCR engine, 11C litre, 370 hp, 1750 Nm Eu5 SCR engine, 11C litre, 410 hp, 1950 Nm Eu5 SCR engine, 11C litre, 450 hp, 2150 Nm D11C330 D11C370 D11C410 D11C450 ■ EBR-VEB Volvo Engine Brake (VEB) □ AT2612D □ PT2106 ■ VT2514B Volvo I-shift 12 speed automatic transmission (2600nm ) Powertronic 6 speed transmission ( 2100nm ) Volvo 14 speed manual transmission ( 2500nm ) ■ RTS2370B Rims and Tyres ■ □ □ □ Single reduction tandem 23t GCW70t Packages ■ AUDHIG Sound system-advanced Chassis RT-ALDPD RT-ALDU RT-ALPDU RT-STEEL 10 stud dura-bright alloy disc rims 10 stud alloy disc rims 10 stud polished alloy disc rims 10 stud steel disc rims □ SPWT-D □ SPWT-F Spare rim & tyre equal to drive Spare rim & tyre equal to steer □ SWCP-T2 Transport mounted spare wheel ■ JACK-12T □ JACK-15T 12 tonne capacity jack with brace 15 tonne capacity jack and brace ■ TOOLKIT Tool kit complete ■ INFLAHOS Tyre inflation hose (20 metres) Powertrain equipment ■ FST-PAR □ FST-PAR3 Parabolic leaf spring front suspension 3 leaf parabolic front springs (stiffer than normal) ■ FAL6.5 □ FAL7.5 Front axle load 6.5 tonnes Front axle load 7.5 tonnes □ TP-FUEC □ TP-HD Distribution and Construction optimized gear changing software Fuel optimized gear changing software Heavy duty (GCM) control software ■ FSTAB □ FSTAB2 □ FSTAB3 Front stabilizer, normal stiffness Front stabiliser bar increased stiffness Heavy duty front stabiliser bar □ AMSO-AUT Manual gear shift in automatic mode. □ AVO-ENH AMT Vocational option - enhanced ■ RAL21 Rear suspension load rating: 21,000 kg □ APF-ENH Enhanced I-shift PTO functions ■ RSTAB1 □ RSTAB3 Rear stabiliser bar Heavy duty rear stabiliser bar □ CD40B-O ■ CS43B-O Volvo 400mm twin plate clutch Volvo 430mm single plate clutch □ ACTST-TO Volvo Dynamic Steering ■ EBS-MED Electronic Brake System (EBS) contains ABS, Traction control, Hill start aid Diff lock control, Brake assist Wheel brake monitoring, EBS status □ TC-HWO ■ TC-MAOH2 □ TC-MWOH2 Transmission Oil Cooler High performance transmission cooler High performance transmission cooler ■ AIRIN-HI High air intake, roofline position ■ ACL1ST-S Air cleaner with two stage filter element ■ 24AL120B □ 24AL150B High capacity alternator, 120 Ampere. Alternator, 150 Ampere □ TRAP-HD Heay Duty Transmission Internals □ PTER-100 □ PTER-DIN □ PTER1400 PTO engine rear mounted with flange DIN100/ISO7646 Power Take Off / splined shaft groove (female) DIN5462. Rear engine mounted power-take-off with flange SAE 1410 □ □ □ □ □ □ □ □ □ □ HPE-F101 HPE-F41 HPE-F51 HPE-F61 HPE-F81 HPE-T53 HPE-T70 HPE-V120 HPE-V45 HPE-V75 F1-101 Hydraulic pump rear engine mounted F1-41 Hydraulic pump rear engine mounted F1-51 Hydraulic pump rear engine mounted F1-61 Hydraulic pump rear engine mounted F1-81 Hydraulic pump rear engine mounted F2-53/53 twin flow hyd pump rear engine mounted F2-70/53 twin flow hyd pump rear engine mounted V1-120 variable pump rear engine mounted V1-45 variable pump rear engine mounted V1-75 variable pump rear engine mounted □ □ □ □ □ □ □ □ □ □ PTPT-D PTPT-F PTR-D PTR-DH PTR-DM PTR-F PTR-FH PTR-FL PTRD-D PTRD-D1 PTO DIN / Powertronic PTO flange conn / Powertronic Low speed PTO with DIN connection High speed PTO with DIN connection Medium speed PTO with DIN connection Rear PTO trans.flange 100% speed High speed PTO with flange connection Low speed PTO with flange connection PTO with 2 DIN connections rear + 1 DIN connection front PTO with 1 DIN + 1 flange connection rear + 1 DIN connection □ AUXPARK Auxiliary parking brake ■ FST7070 □ FST8080 Frame section thickness 7mm Frame section thickness 8mm □ ■ □ □ □ Liner (inner) from end of engine to end of frame Liner (inner) - front of bogie to end of bogie Liner (inner)- front of bogie to end of frame Liner (inner) - trans x-mem to end of bogie Liner (inner) - trans x-mem to end of frame FIL-EEEF FIL-FBEB FIL-FBEF FIL-TXEB FIL-TXEF ■ BBOX-L Battery box mounted on LHS chassis rail ■ 2BATT225 2x225 Ah batteries □ BATTIND Battery charge indicator (in the DID) ■ MSWI-C □ MSWI-R Isolation toggle switch LHS of chassis Isolation switch on key fob (press door lock twice to isolate) ■ R415A66 RHS 415 litre alloy fuel tank w/o step Min volume 415l Max volume 465l ■ UL-FUEL LHS fuel tank not fitted ■ ADB064 □ ADB090 AdBlue tank 64 litres (LHS) AdBlue tank 90 litres (LHS) ■ FCAP-L Fuel tank cap with lock ■ ESH-RIGH □ ESH-VERT Muffler horizontal, right exhaust outlet Muffler horizontal, vertical exhaust outlet on right hand side ■ Standard Equipment □ TP-DICON □ Optional Equipment For more detailed information about cab and powertrain equipment, please refer to separate specification sheets. For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the Volvo Sales Support system (VSS). The factory reserves the right to modify design and change equipment without previous notification. The specification can vary from country to country. 2 (4) Ref: FM 64 R1HAX16 NZL 2014-09-18 ENGAU New FMx11 HAX 6x4 Rigid Air Ride - Construction/Heavy Construction FM 64 R1HAX □ PTRD-D2 □ PTRD-F □ □ □ □ □ HPG-F101 HPG-F41 HPG-F61 HPG-F81 HPG-V120 front PTO with 2 flange connection rears + 1 DIN connection front PTO with 1 DIN + 1 flange connection rear F1-101 hydraulic pump gearbox mounted F1-41 hydraulic pump gearbox mounted F1-61 hydraulic pump gearbox mounted F1-81 hydraulic pump gearbox mounted VP1-120 hydraulic pump gearbox mounted □ ETSB-R Rear cab wall storage □ TABLE Table □ REF-ICPK Refrigerator prep kit (on engine tunnel) □ BOTH-D Bottle holder in driving area ■ INLI-BAS □ INLI-NL Interior night lights Interior white and red (night) light □ EIDLESD Engine idle shutdown (2.5 minutes) □ ARL-FLEX Flexible reading lamp (snake light) ■ INST-MED Mechanical instrument cluster with DID. ■ RH-MSR Roof hatch-manual - steel - rear opening □ CRUIS-E ■ CRUISEC Cruise control (use with TP-FUEC or TP-FUEC3) Cruise control Cab exterior ■ PAICS-B Grey mirrors, sun visor, instep & bumper ■ ESP-BAS1 ESP package (trailer combinations with ABS) ■ AWIND-RF Cab rear window- fitted □ HWSS-AC Adaptive cruise control & forward collision warning □ SWIND-PS Cab passenger side aux. window □ LCS Lane change support □ RSENS-W Rain sensor to activate wipers ■ LOCK-MAN □ LOCK-REM Manual door locking Central door locking with remote control □ CU-ECC ■ CU-MCC Climate controlled air conditioning Manual controlled air conditioning ■ BUMP-HD Bumper-heavy duty □ IMMOBIL Engine immobiliser □ SIDEH-B □ SIDSTP-R Side handle ( driver's side ) Side ladder with handle ( driver's side ) □ ALARM-B Anti-theft alarm (cab) ■ BUGNET Insect net in front of radiator ■ WLIFT-EB Electric windows ■ ISUNS-DS □ CTILTP-E ■ CTILTP-M Electrical cab tilt pump Manual cab tilt pump Interior side sunvisor - driver's door ■ ISUNF-B □ ISUNF-MD Interior front sunvisor-standard Interior front sunvisor- with mirror (driver's side) □ FCABS-A ■ FCABS-M Front cab suspension-air bellows Front cab suspension-mechanical spring ■ CSPU-S Upper-cup holders & lower-storage area □ RCABS-A ■ RCABS-M Rear cab suspension-air bellows Rear cab suspension-mechanical spring ■ BUPALARM Reverse alarm ■ MIRCOMFX Heated & elec. operated both sides. (convex ) □ BUPMON Back-up monitor ■ SUNV-H Exterior sunvisor □ LOADIND Load indicator, electronic controlled suspension (SUSPL-EC) □ AD-ROOF Aero-dynamic roof mounted deflector □ REMC-MF Multifunction wireless remote control □ AD-SIDES Aero-dynamic cab side deflectors ■ FIREX25A Fire extinguisher 2.5 kg □ GUARD-W Windscreen stoneguard ■ WRITEPAD Storable steering wheel fit clip board ■ UPHTRI01 Vinyl & Textile trim ■ HL-BAS2 □ HL-BHID2 Heavy duty headlamps Xenon head lamps high intensity discharge ■ DST-CF5 Fully adjustable driver's comfort seat Air suspension, heated, integrated safety belt □ HL-CLEAN Head lamp cleaning system ■ HLP-ST □ HLP-ST2 Headlamp protection-steel Headlamp protection-steel/wire mesh (non ADR compliant) □ HL-ADJ Head lamp adjustment ■ DRL-LED V-shaped LED daytime running light ■ IDLAMP-A Identification lamps-amber Passenger seatbelt pretensioner □ BEACON-P Beacon light wire preparation Armrests driver's both sides - passenger side single Armrests both sides - driver's & passenger's seat Armrests both sides - driver's seat □ SPOTP-F Aux spotlamp preparation, 280W maximum □ ANT-CBR Antenna for CB radio, single antenna ■ SBPRE-DS Drivers seat belt pretensioner ■ PST-BAS1 □ PST-BENC □ PST-CF5 Basic passenger's seat Passenger bench seat Fully adjustable passenger comfort seat Air suspension, heated, safety belt □ SBPRE-PS □ ARM-DBPS □ ARMRE-BB ■ ARMRE-DB Superstructure ■ ARU-BAS Seat armrest upholstery - basic ■ GRABHI-B Instep grab handle - standard ■ FMAT-RU2 □ FMAT-TX2 Floor mats-rubber (extended side) Floor mats-textile & rubber □ LBK-RES □ LBK70 ■ ULBK Foldable rest kit Lower bunk 700mm wide Without lower bunk □ MATL-SF Mattress lower bunk - semi firm □ WL-CHPK Chassis mounted working lamp prep kit □ OLMAT-BA Mattress overlay - basic □ SAFE Safe box at bed-end □ ETSB-F □ ETSB-FR Engine tunnel storage box Engine tunnel storage box & rear cab wall □ □ □ □ 2 x H3/70W work lamps with white lens. Prep kit for high-mounted work lamps. Prep kit for low-mounted work lamps. Prep kit for low- and high-mounted work lamps. ■ Standard Equipment □ SRWL-2RW □ SRWL-PK □ □ □ □ SWL-2FW SWL-2RW SWL-4W SWL-PK WLC-H2W WLC-PKH WLC-PKL WLC-PKLH 2 white rear chassis-mounted working lamps Wiring prep for chassis-mounted reverse/working lamps-3 position switch 2 white side working lamps (forward facing) 2 white side working lamps (rearward facing) 4 white side working lamps Wiring prep for chassis-mounted working lamps-2 position switch □ Optional Equipment For more detailed information about cab and powertrain equipment, please refer to separate specification sheets. For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the Volvo Sales Support system (VSS). The factory reserves the right to modify design and change equipment without previous notification. The specification can vary from country to country. 3 (4) Ref: FM 64 R1HAX16 NZL 2014-09-18 ENGAU New FMx11 HAX 6x4 Rigid Air Ride - Construction/Heavy Construction FM 64 R1HAX ■ ECBB-HIG Body builder module □ BBCHAS1 □ BBCHAS3 Body builder chassis electrical interface, 1 x 7 pin connector Body builder chassis electrical interface, 3 x 7 pin connectors □ BEPR-T2 Body Builder electrical prep. for tipper with remote control □ HBA-SB Holes for body attachments ■ AESW2 □ AESW2PK 2 flexible switches (AUX 1 and AUX 2). 2 flexible switches (AUX 1 & AUX 2) + additional 4 flexible switches □ AUXSW-4 4 extra bi-stable switches wired to BBM Delivery services ■ TGW-3GWL Telematics gateway with 3G & WLAN □ TESP-T TESP (Dynafleet) with transport info □ FMS-PK Fleet management system gateway ■ Standard Equipment □ Optional Equipment For more detailed information about cab and powertrain equipment, please refer to separate specification sheets. For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the Volvo Sales Support system (VSS). The factory reserves the right to modify design and change equipment without previous notification. The specification can vary from country to country. 4 (4) Ref: FM 64 R1HAX16 NZL 2014-09-18 ENGAU