New New The Essentials The Essentials New

Transcript

ls a e i Th ent Ess TESA DIGICO 11 electronic indicator with INTERAPID measuring support ls a e i Th ent Ess VALIDITY : 31 .12.2006 VAT excluded w e N € 2218.- TESA DIGICO 11 / Ø 60 / 0 ÷ 12,5 mm / 0,001 mm 01930104 www.tesabs.ch TESA RUGOSURF 10G 368.- 478.- INTERAPID support / H 100 mm / Ø 49 mm 01639006 206.- 265.- TESA DIGICO 10 electronic indicator with INTERAPID measuring support TESA DIGICO 10 / Ø 60 / 0 ÷ 12,5 mm / 0,001 mm 01930101 INTERAPID support / H 170 mm 01639035 € 221.- 256.- Versatile surface roughness gauge designed for the workshop. Large size colour display for easy reading of the graphic measurement results. Full set - Order No 06930011 € 2218 221.- 287.- TESA DIGICO 1 electronic indicator with INTERAPID support € TESA DIGICO 1 / 0 ÷ 30 mm / 0,001 mm 01930000 € 305.- 397.- 206.- 600.- 790.- 01639008 256.- 333.- COMPAC lever dial test indicator Ø 58 / 0 ÷ 10 mm / 0,01 mm Order No 512K € 87.- Order No 215 G € 68.- € 163.- € 125.- € TESATAST lever dial test indicator Ø 28 / 0,01 mm 0,5 mm / Contact point L=12,53 mm Order No 01810007 € 109.- Measured roughness parameters ISO standard Ra, Rq, Rt, Rz, Rp, Rv, Rc, RSm, Rδc, Rpc, Rk, Rpk, Rvk, Mr1, Mr2, Pa, Pq, Pt, Pp, Pv, Pc, Psm, Pδc, Ppc. DIN standard Rmax, R3z, R3zm CNOMO standard R, AR, Rx, Rke, Rpke, Rvke Accessories : Wide choice of probes ; matrix printer ; software for results viewing and storage Ø 40 mm / 0,002 mm 0,6 mm / Contact point L=18 mm COMPAC dial gauge 5 Cut-off Lc (mm) 0,25 0,80 2,50 Total length Lt (mm) 1,50 4,80 15,00 Traversing length Lm (mm) 1,25 4,00 12,50 Measuring range 0 - 300 μm Measuring force as per to ISO 3274 0,75 mN Gauss filtre as per ISO 11562 - Storage 30 profiles /30 000 values - Diamond tip, R = 5 μm, 90° INTERAPID support / H 140 mm 125.- € TESA SPACER 100 and 200 Technical features Hand-held laser meters for measuring long distances. Easy-to-use, fast and accurate. Measures length, area and volume. Measuring span Square m 2 Volume m3 Highest value Lowest value Distance along with 2 auxiliary values Distance along with 3 auxiliary values Partial distance along with 3 auxiliary values Slow-release Spirit level View finder, 2x magnification 87.- € 87.- € 0 - 100 m w e N 0 - 200 m 329.- INTERAPID IRA 2 dial bore gauge € € 59.- 68.- Order No 079105704 Measuring range 10 - 150 mm € 1339.- Order No 01419047 € 76.- € 59.- 10 - 150 ° Order No 01130010 01130020 € € 429.Printed in Switzerland - Modifications rights reserved - 10012.029.0609 Ø 40 / 0 ÷ 5 mm / 0,01 mm SPACER 100 SPACER 200 100 m ✔ ✔ ✔ ✔ 200 m ✔ ✔ ✔ ✔ – ✔ – ✔ – – – – ✔ ✔ ✔ ✔ ✔ 1 2 3 4 5 w e N SCS Calibration Certificate included FREE OF CHARGE ! ls ria e ate m ang ity racy ring r y l a u log u u hq acc eas hno c e Hig teed he m t n t ed ara out anc v d d Gu ough a ate st thr libr mo a c e h st and ure ed t t c a e p Fe ins lly a u ty ivid bili Ind elia r l a ion ept c x E TESA Spacer 1339.- ETALON Basic dial gauge s sona a e in r ng ma hoosiMade c ss l forA Swi g too TES surin mea ii e e t t TT hhss ee nn EE ss ss l l aa TESA SA Switzerland Bugnon 38 CH-1020 Renens Tél. +41 (0)21 633 16 00 Fax +41 (0)21 633 17 57 [email protected] Model Spacer 100 Spacer 200 € 329.429.- New TESA-HITE 400 and 700 Measuring spans : 415 / 715 mm Application range : 570 / 870 mm With accessory S07001622 : 795 / 1095 mm Accuracy : (2,5+4 • L) μm (L in m) Repeatability : 2 s ≤ 2 μm Perpendicularity error : 10 / 15 μm Automatic meaurement of diameters Protected against the penetration of dust or liquids Integrated air cushion TESA FRANCE SAS 13-15, av. Georges de La Tour F-54303 Lunéville Cedex Tél. +33 (0)3 83 76 83 76 Fax +33 (0)3 83 74 13 16 [email protected] TESA Deutschland Hexagon Metrology GmbH Netzestraße 32 D-71638 Ludwigsburg Tel. +49 (0)7141 8747 0 Fax +49 (0)7141 8747 88 [email protected] TESA Technology UK Metrology House – Halesfield 13 Telford, Shropshire TF7 4PL Tel. +44 1952 681 349 Fax +44 1952 681 391 [email protected] TESA Technology ITALIA s.r.l. Via Bizzozzero, 118 20032 Cormano (MI) Tel. +39 (0)2 663 053 69 Fax +39 (0)2 663 090 82 [email protected] TESA Technology Ibérica Av. de Vizcaya s/n – Apart. 202 ES-48260 Ermua Tel. +34 943 170 340 Fax +34 943 172 092 [email protected] BENELUX – Pascal Siebens Generaal de Wittelaan 17 – Bus 21 B-2800 Mechelen Tel. +32 (0)15 435 301 Fax +32 (0)15 435 302 [email protected] Headquarters: TESA SA – Bugnon 38 – CH-1020 Renens – Switzerland – Tel. + 41 (0)21 633 16 00 – Fax + 41 (0)21 635 75 35 – www.tesabs.ch – [email protected] Order No. 00730043 00730044 Model 400 700 € 3120.3987.- € 2490.3190.- € 3190.€ 2490.- e tial h T en Ess € 105.- s e tial h T en Ess TESA calipers with vernier reading • • • • • Swiss made Accuracy according to DIN 862 / NF E 11-091 Hardened stainless steel Satin-chrome scale background, protected against wear Provided with inspection report along with a declaration of conformity s e tial h T en Ess TESA-CAL IP67 Electronic Calipers • • • • • s www.tesabs.ch Swiss made Accuracy according to DIN 862 100 % protection against fluids Opto-coupled RS 232 data output on selected models Provided with inspection report along with a declaration of conformity € € 125.- 171.- Micromaster Easy Order No 06030010 € Vernier 0,02 mm 00510509 00510511 00510521 00510531 00510541 00510551 Vernier 0,05 mm 00510506 00510512 00510522 00510532 00510542 00510552 Measuring range 0 - 200 mm 0 - 250 mm 0 - 300 mm 0 - 400 mm 0 - 500 mm 0 - 600 mm € 105.132.144.320.397.511.- Measuring range 0 - 200 mm 0 - 250 mm 0 - 300 mm 0 - 500 mm € 123.151.171.467.- Models with external jaws and rounded measuring faces Vernier 0,02 mm 00510701 00510711 00510721 00510741 € Vernier 0,05 mm 00510702 00510712 00510722 00510742 w e N 317.- Vernier 0,05 mm 00510371 00510375 Measuring range 10 - 160 mm 20 - 160 mm € 131.188.- Depth Calipers Accuracy according to both DIN 862 (Style C) and NF E11-096 Removable bridge (optinal for all models) € 227.- Vernier 0,05 mm 00510134 00510144 00510164 00510174 Measuring range 0 - 150 mm 0 - 250 mm 0 - 500 mm 0 - 600 mm € 76.109.203.260.- Vernier 0,05 mm 00510124 € € € 105.- 340.- 378.- Measuring range 0 - 150 mm Order No 00530300 00530301 00530311 00530302 00530303 Measuring range 0 - 150 mm 0 - 150 mm 0 - 150 mm 0 - 200 mm 0 - 300 mm IP 67 ✔ ✔ ✔ ✔ ✔ RS 232 ✔ - € 131.131.163.202.298.- € 105.105.128.142.209.- Order No 00530221 00530222 00530223 Measuring range 0 - 200 mm 0 - 250 mm 0 - 300 mm IP 67 ✔ ✔ ✔ RS 232 ✔ ✔ ✔ € 282.307.317.- Models with rounded measuring faces (internal) and knife-edge jaws (external) Convertible models with both a steel tip and short cut measuring face Vernier 0,02 mm 00510123 € 128.- Models with rounded measuring faces for inside dimensions Models with flat measuring faces Vernier 0,02 mm 00510133 00510143 00510163 00510173 TESA-CAL IP67 Advanced Technology € 119.- Order No 00530231 00530232 00530233 Measuring range 0 - 200 mm 0 - 250 mm 0 - 300 mm ✔ ✔ ✔ € ✔ ✔ ✔ 301.326.350.- 119.- Vernier 0,02 mm 00510202 00510212 00510222 Vernier 0,05 mm 00510201 00510211 00510221 81.- Order No 00119046 00119050 Measuring range 0 - 25 mm 0 - 100 mm Measuring range 0 - 150 mm 0 - 250 mm 0 - 500 mm * Additional models up to 2000 mm available upon request € 227.238.273.- Models with rounded measuring faces and knife-edge jaws (internal for both) Order No 00530230 Measuring range 0 - 250 mm IP 67 ✔ RS 232 ✔ Depth Calipers RS 232 ✔ ✔ ✔ € 305.322.340.- ✔ ✔ 378.- Model with two fixed jaws 00530247 0 - 300 mm ✔ ✔ 469.- Model with rotary stop plate 00530248 0 - 250 mm ✔ ✔ 350.- IP 67 ✔ ✔ ✔ RS 232 ✔ ✔ ✔ € 370.378.394.- € 392.- Measuring range 0 - 150 mm 0 - 200 mm 0 - 300 mm € € 36.- 219.- 63.- € 43.261.- € 36.219.- Order No 06230023 06230024 06230025 06230026 06230027 06230028 06230029 06230030 06230031 06230032 06230033 06230034 06230035 Measuring range 10 - 12.5 mm 12.5 - 15 mm 15 - 17.5 mm 17.5 - 20 mm 20 - 25 mm 25 - 30 mm 30 - 35 mm 35 - 40 mm 40 - 50 mm 50 - 60 mm 60 - 70 mm 70 - 85 mm 85 - 100 mm TESA ALESOMETER Partial tool sets € 855.855.855.855.867.867.867.867.941.941.941.941.941.- € 656.656.656.656.667.667.667.667.721.721.721.721.721.- Order No 06230100 06230110 06230111 06230112 Measuring range 6 - 10 mm 10 - 20 mm 20 - 40 mm 40 - 100 mm € 1168.1617.1713.2980.- € 876.1213.1284.2234.- € 2234.- Model with one fixed jaw 00530245 0 - 300 mm Order No 00530271 00530272 00530273 € 180.230.275.303.- € 63.- TESA ALESOMETER Internal micrometers € IP 67 ✔ ✔ ✔ € 234.298.357.391.- € 180.- ETALON BASIC external micrometers Horizontal Scale Units Models with rotary stop plate € 00160201 721.Models with a short cut measuring face Order No Measuring range 00530241 0 - 200 mm 00530242 0 - 250 mm 00530243 0 - 300 mm € 125.- TESA micrometer stand € w e N Measuring range 0 - 30 mm 25 - 75 mm 50 - 75 mm 75 - 100 mm TESA-CAL IP67 - The Reference Models for internal grooves 76.- Order No 06030030 06030031 06030032 06030033 392.- Models with rounded measuring faces € 180.- Micromaster IP 54 with RS232 data output € 131.- Measuring range 0 - 30 mm TESA Printer SPC No 06430000 RS Cable No 04761046 € 61.- € 327 .-