Transcript
New products 2015
NEW PRODUCTS 2015 •
Audio Pro Dept •
Ingenia Series
•
ES Entertainment System
•
LVX Series
•
L80D
•
DVX P Series
•
DVA Mini M2P
•
Ready 4
•
Radio Microphone •
Moving D
•
Moving One
Series
IG1T
IG2T
IG3T
IG4T
Series
IG1T
IG2T
IG3T
IG4T
IG1T
2x 6.5” woofer, 1x 1” CD 400W RMS 800W Peak
IG2T
2x 8” woofer, 1x 1” CD 400W RMS 800W Peak
IG3T
2x 10” woofer, 1x 1.4” CD 900W RMS 1800W Peak
IG4T
4x 6.5” woofer, 1x 1.4” CD 900W RMS 1800W Peak
Series
MAIN FEATURES Premium Technology
Controlled Energy Coverage (New Horn Design) Element Position Detection (InfraRed Port) User-friendly DSP interface (OLED and Encoder) Digipro™ Class-D Amplifiers - 400W / 900W RMS Neodymium Magnet Transducers Unique Speaker Lock System Flyable/Stackable Systems
Series
Controlled Energy Coverage
The innovative design of the horn is based on the concept of an ASYMMETRICAL vertical pattern This makes possible to work with 2 speakers together, coupling the HF horns.
The clever digital processing makes Ingenia able to control the dispersion of the beam through a real DIGITAL STEERING coverage.
Series
Controlled Energy Coverage
Asymmetrical Vertical Coverage The horn of INGENIA is horizontally symmetric and vertically asymmetric
Horizontal dispersion is wide and constant
Vertical dispersion is narrow in the upper part and wide in the lower
Avoiding phase problems when a second speaker is placed upside
Series
Controlled Energy Coverage
Asymmetrical Vertical Coverage The special tracks placed below the throat of the waveguide
Increase the effectiveness of the asymmetric coverage
Improve the intelligibility and provide crystal clear sound in high frequency
Series
Controlled Energy Coverage
Digital Steering Coverage The powerful processing of INGENIA
Steers coverage according to system configuration
Acts on all transducers, allowing consistent coverage and minimizing phase cancellations due to multiple wave front overlapping
Series
Element Position Detection Infrared-Core Handle
The handle contains an infrared communication system that can detect the presence of another speaker placed on top.
Daylight-Interference Free
The infrared detection system does not suffer the presence of sunlight, so it can be used safely in any outdoor environments without any fear that something might not work properly
Series
Element Position Detection
Control Mirroring via Infra-Red Port
When stacked, the two speakers work as a single system.
Volume, and DSP Processing are unified. In other words, every change in the Master speaker will be instantly mirrored on the Slave
Series
User-Friendly Interface OLED Display
The OLED display, visible even in the sunlight, is mounted behind an elegant smoked screen and provides all the necessary information to the total system control. Furtermore, the display is integrated with an accelerometer, which allows a self-rotating function.
Rotary Encoder
All editing operations are carried out through a single rotary encoder with switch, making them extremely easy and errorfree
Series
User-Friendly Interface Configuration Wizard and Auto-Setup
The advanced interface guides the user step by step, by asking information about use and system configuration
The system automatically sets up all necessary parameters, such as EQ, Digital Steer, High Pass Filter, etc. in order to quickly get to the best possible setup.
Series
User-Friendly Interface
System Configuration Top and Subwoofer matching
The system even allows you to choose from a variety of configurations with one or more INGENIA speakers and combinations with one or more subwoofers, choosing among several dBTechnologies subs models, or generic ones.
Series
Digipro® G-3 Class-D Modules Great Power in Small Format INGENIA series comes with Digipro® G3 digital amplifiers. They feature:
400W RMS (IG1-2T) and 900W RMS (IG3-4T) in a lightweight design
SMPS technology with PSU auto-range
Remarkably efficiency and convection cooling (no fans need)
New Neutrik® NAC3PX mains connector
Series
Neodymium Magnet Transducers Lightweight and efficient
INGENIA series feature neodymium magnets, improving reliability, performance and contributing to contain the overall weight of these modules
Weights range from 10,6Kg (23.37lbs.) of IG1T to 22,24Kg (49.03lbs.) of IG3T, making them absolutely portable and easy to handle
Series
Unique Speaker Lock System
The innovative locking system of INGENIA series is the result of a very clever design Quick System Setup
One accessory fits all Ingenia models Assembly is extremely fast The lock system is rugged and absolutely reliable
Series
Unique Speaker Lock System Smart feet and recessions On top and bottom of the enclosure there are feet and recessions designed to allow perfect topto-top speakers matching. This system: Ensure the speakers to be perfectly aligned before locking the clamps
Guarantee maximum safety and longer life to mechanical parts
Avoid incorrect operations and wrong setup configurations
Series
Flyable System One Fly-bar for all models The INGENIA fly-bar is adaptable to all speakers of the series, thanks to the mechanical system that adapts the bar to the width of the different models A real line array system The bar allows the user to hang up two speakers in vertical array. Then the user can choose the appropriate processing preset
Series
Flyable System Flying on a truss An additional accessory is available to adapt the fly-bar to truss couplers and allow the array to be fixed to a truss It’s also a smart solution to block the aiming of the system in case of wind
Series
Stackable Speakers 36mmØ standard pole
INGENIA series’ housings feature a Ø36mm hole to allow them to be placed on a speaker stand, both on a sub or on a tripod
Series
Technical Specifications IG1T Speaker Type Freq. Resp. [-‐ 10dB] Freq. Resp. [-‐ 6dB] Max SPL HF DirecEvity Horn LF Amplifier Processor EQ Presets Limiter User Interface PosiEoning ConnecEons Housing Dimensions Weight
IG2T
IG3T
IG4T
1.4" Neo. Compr. driver, 2.5” v.c.
1.4" Neo. Compr. driver, 2.5" v.c.
2-‐Way Ac)ve Speaker
1" Neo. Compr. Driver, 1.4" v.c.
1" Neo. Compr. Driver, 1.4" v.c.
Ver)cal asymmetric 2x6.5” Neo., 1.5" voice coil 2x8”Neo., 2" voice coil 2x10” Neo., 2.5" voice coil 4x6.5” Neo., 1.5" voice coil 400W Class-‐D Digipro® G3 900W Class-‐D Digipro® G3 DSP 56 bit, 24bit/48kHz AD-‐DA conv. Dual Ac)ve Peak, RMS, Thermal OLED display + rotary knob w/switch, Self-‐rota)ng display, Control Mirroring EPD (Element Posi)on Detec)on) 1 x Combo IN (XLR + Jack 6.3mm), 1 x XLR link OUT, 1x USB Mini Type (Service Data) Polypropylene PP reinforced, Full Grille with invisible screws, 2x handles (1x on top / 1x on bodom), Standard D36mm pole mount 195x536x271 mm 228x646x315 mm 195x956x271 mm 280x806x393 mm 7.68x21.10x10.67 in 8.98x25.43x12.40 in 7.68x37.64x10.67 in 11.02x31.73x15.47 in 10,6Kg (23.37 lbs.) 12,8Kg (28.22 lbs.) 22,24Kg (49.03 lbs.) 19,4Kg (42.77 lbs.)
ES 503
STEREO ENTERTAINMENT SYSTEM, 1000W
ES 602
MONO ENTERTAINMENT SYSTEM, 800W
entertainment
system
ES 802
MONO ENTERTAINMENT SYSTEM, 1200W
entertainment
system
602
802
STEREO OR MONO SYSTEM
MONO SYSTEM
MONO SYSTEM
1000W
800W
1200W
3 INPUTS 1 AUX/LINK OUTPUT
1 INPUT 1 RCA IN 1 LINK OUTPUT
1 INPUT 1 RCA IN 1 LINK OUTPUT
1x 12” Sub
1x 10” Sub
1x 12” Sub
2x Top
1x Top
2x Top
entertainment
System Main Features System
● 3-Amp Stereo System ● 1000W Power Amp
● 2x Tops with 4x 3” full-range speakers
● 1x 12” Subwoofer
● Stereo or mono configurations
● 3 Inputs mixer (Mic/Line/Instrument)
● Bluetooth® audio receiver
● 1 customizable AUX/MIX Output
entertainment
System
Main Features Basic Bundle
The ES503 bundle is composed by:
● 1x Subwoofer Unit
● 2x Top Speakers
● 1x Ø25mm pole (sectioned into two segments for easy transport) ● Speakon/Speakon cable (to connect lower top to subwoofer)
entertainment
System System Configurations
Option 1
Option 2
Option 3
Single Column Mode
Single Stereo mode
Double Column Mode
1x Stand Pole
2x Tripods or 1x Stand Pole and 1x Tripod
2x ES503
entertainment
System
System Configurations
Option 1: Single Column Mode 1x stand pole ● The two speakers are connected top-on-top and are placed on subwoofer
through the supplied D25mm pole
● The system is used in mono. All inputs are routed to both outputs
The user can adjust volumes, 3-band EQ and send a second mix with different levels to the AUX/MIX output
entertainment
System System Configurations Option 2: Double Stereo Mode 2x tripods or 1x Tripod and 1x Stand Pole
This configuration, in addition to the basic system, needs the Stereo Kit ES503 (Kit composed by 2x D25mm tripods with bag and 2x 7m Speakon-Speakon cable)
● Mic/Instrument input is assigned to both channels
● CH1/LINE L (and Bluetooth® L) is assigned to Output L
● CH2/LINE R (and Bluetooth® R) is assigned to Output R
The user can adjust pan, volumes and EQ. He can also prepare a second mix with different levels for the AUX / MIX output
entertainment
System System Configurations Option 3: Double Column Mode 2x ES503
The third option uses two ES503 in Single Column Mode: one of the two becomes the Master for the second, feeding the signal thanks to the integrated balanced output channel. This way, both systems are driven by the Master’s onboard mixer and any setup is guided through the Master Oled Display. As a result, we get a Stereo System working without any external mixer.
entertainment
System Main Features TOPs
● 4x 3” Full-range Speakers
● Acoustic Coherent Coverage
● Curvic/Logaritmic Column Array
● Double-Ringed Phase Plug ● Digital Vertical Steering
● Fast Speaker Connection ● Pole Mount
entertainment
System ACC (Acoustic Coherent Coverage)
It’s the new technology developed by dBTechnologies to give ES Series a sound well beyond expectations. It is the combination of three elements:
● Logarithmic Curved Disposition
● Double-Ringed Phase Plug ● Digital Vertical Steering
entertainment
System
Acoustic Coherent Coverage
Logarithmic Curved Disposition ● Components of the top are mechanically aligned according to
a logarithmic curve, so as to increase the coverage of the vertical beam
entertainment
System
Acoustic Coherent Coverage Double-Ringed Phase Plug ● A special phase plug is placed on each speaker in order to
increase the horizontal coverage and give a rich and crystal clear sound to the system
entertainment
System
Acoustic Coherent Coverage
Digital Vertical Steering ● The powerful processing steers the aiming of each top
allowing consistent vertical coverage and minimizing phase cancellations due to multiple wave front overlapping ● The steering acts according to different system
configurations
entertainment
System
Fast Speaker Connection Top-to-Top Slide Connection ● The enclosure of the two satellites embeds a slide
connection system, which assures perfect top-to-top matching without the risk of incorrect assembly
● It also includes the electrical connection between the two
tops
entertainment
System
Fast Speaker Connection
Power Connection ● The two tops are respectively marked by the
letter A and B, making them easily identifiable ● “A” top receives the powered signal from the
subwoofer through a 4-poles male Speakon™ connector and re-launch the audio through the quick connection system on top of its cabinet
entertainment
System
Fast Speaker Connection
Electric Connection ● "B" top is even equipped with the Speakon™ connector and the quick
connection system, but in case of stacked use its position must be over the "A" speaker
● In other words, both tops can be used on speaker stands or poles, but in
case of vertical array the default setup must be respected
entertainment
System Main Features Subwoofer
● Active 12’’ Subwoofer
● Class-D Digital Amp with SMPS and Auto-Range ● 3-Channel Mixer with Wizard for easy setup ● OLED screen + Automatic Rotary System
● Anti-Feedback Notch Filter with selectable frequency ● EQ Factory Presets + 1 User Preset ● Built-in Bluetooth® stereo audio receiver
entertainment
System
Active Subwoofer Bass-Reflex Enclosure
● 12” Woofer
● 15mm Black Painted Birch Enclosure
● 2x Lateral Handles
● Ø 25mm Pole Mount
● Sturdy and lightweight (16.4 Kg)
entertainment
System
Active Subwoofer Metal Grid with Foam ● Protects the woofer and give a very elegant and
professional look
● Helps the reflex effect - The holes on the lower part
of the grid, just on the reflex ports, have a larger diameter and there is no foam. This facilitates sound dispersion
entertainment
System Digipro® G-3 Class-D Modules
Great Power in Small Footprint ES503 comes with Digipro® G3 class-D digital amplifier. It features:
● 1000W in lightweight design
● SMPS technology with PSU auto-range
● Remarkably efficiency and convection cooling
(no fans need)
entertainment
System
Built-in 3-channel mixer Mic/Instrument Channel
● Balanced/unbalanced combo connector ● Impedance compensation
● Notch-filter with selectable frequency
● Adjustable gain with 3 positions (0, +10, + 20dB)
entertainment
System
Built-in 3-channel mixer 2 Line Level Channels
● Two Balanced/unbalanced combo connector
● Bluetooth™ built-in stereo receiver
Mix Output ● Mix Output: 1x XLR balanced output
entertainment
System
Built-in 3-channel mixer 3-Band EQ ● 3-band EQ that, depending preset configuration,
works as an overall EQ or channels EQ
● The user can choose among Factory Presets + 1 User
defined Preset
entertainment
System
Built-in 3-channel mixer CUSTOMIZABLE Mix Output
This XLR output can be used:
● As a simple mono link connection to re-launch part of
the stereo mix to another speaker system (e.g.: right output to a second ES503) ● To create a new mono mix with independent levels
for stage monitoring or recording purposes
This output is also provided with a second notch filter with selectable frequency
entertainment
System User-Friendly Interface Intuitive Wizard ● The ES503 comes with an intuitive wizard that
guides the user step-by-step and automatically configures the system
● The advanced graphical interface allows to enter
the heart of the system, allowing the user to recall configuration presets, adjust levels, EQ and create a post/post gain mix for different purposes
entertainment
System User-Friendly Interface OLED Display ● The OLED display, visible even in the sunlight, is
mounted behind an elegant smoked screen and provides all the necessary information to the total system control Rotary Encoder ● All editing operations are carried out through a
single rotary encoder with switch, making them extremely easy and error-free
entertainment
System User-Friendly Interface
Service Data USB Port ● The integrated USB Mini-type port allows the user
to upgrade the firmware of the ES503, ensuring the system to be always updated to the latest version (download it from www.dbtechnologies.com)
entertainment
System Accessories
SK-25TT
Kit with 2x Tripods (D25mm) + bag
DCK-4P
Kit composed by 2x Speakon cables, 7m length
Stereo Kit ES503
Kit with 2x tripods, 1x bag for tripods + 2x 7m Speakon cables
TC-ES12
Bag for ES503
DT-50
Trolley for ES503 and SUB 28D+2x L 160D
TK-ES12
Transport kit for ES503 (trolley + bag)
entertainment
System ES 503 Speaker Type Frequency Response [-10dB] Max SPL MF-HF LF Directivity Amplifier Technology Controls Power Supply Processor System Presets Crossover Frequency LF-MF Inputs / Outputs Housing Dimensions WxHxD Weight
3-amped Stereo System with two full-range tops and one subwoofer 37 - 15.000 Hz 121 dB 8x 3” Neodymium 12” 95°x65° 1000W Digipro® G3 Class-D power amp 1x OLED Display with rotary encoder w/switch 1x Audio signal monitoring LED 1x USB “B” type port (service data) SMPS with PSU Auto-range and VDE socket DSP 24 Bit/48 kHz with Dual Active, Peak, RMS and Thermal Limiter Factory presets + User defined 206 Hz Mic/Instrument Channel: 1x Combo (XLR/Jack) balanced/unbalanced input Line Channels: 2x Combo (XLR/Jack) balanced/unbalanced inputs Media Channel: 1x Bluetooth™ built-in receiver Mix Output: 1x XLR balanced output Subwoofer: 15mm Black Painted Birch Plywood / Tops: Polypropylene PP Subwoofer: 465x400x430 mm - 18.3x15.7x16.9 in / Tops: 95x360x137 mm – 3.74x13.98x5.39 in 1 Top: 1.9Kg – 4.19lbs. / Subwoofer: 16.4Kg – 36.16lbs
602 MONO SYSTEM
800W 1 INPUT 1 RCA IN 1 LINK OUTPUT
1x 10” Sub 1x Top
802 MONO SYSTEM
1200W 1 INPUT 1 RCA IN 1 LINK OUTPUT
1x 12” Sub 2x Top
The Series LVX 8 2-Way Active Speaker, 8” / 1”, 400W PRG
LVX 10 2-Way Active Speaker, 10” / 1”, 400W PRG
LVX 12 2-Way Active Speaker, 12” / 1”, 800W PRG
LVX 15 2-Way Active Speaker, 15” / 1” 800W PRG
Main Features •
Selected Transducers
•
Rotatable Compression Diver Horns
•
Digipro® Class-D Digital amp modules
•
24-Bit/48kHz DSP with EQ Presets
•
Elegant and Sturdy Enclosures with Multifunctional Design
•
Rigging points, Wall-mount brackets and Pole-mount plate
Impeccable Sound Very linear voicing for any audio contents ●
Selected Transducers LVX 8 HF
LVX 10
LVX 12
LVX 15
1” compression driver with 1” voice coil
LF
8” woofer 1.5” v.c.
10” woofer 2” v.c.
12” woofer 2” v.c.
15” woofer 2” v.c.
Freq. Resp. [-10dB]
65 - 20.000 Hz
60 - 20.000 Hz
55 - 20.000 Hz
49 - 20.000 Hz
Max SPL
121 dB
125 dB
127 dB
128 dB
Xover Freq.
2050 Hz, 24dB/Oct.
1800 Hz, 24dB/Oct.
Impeccable Sound Very linear voicing for any audio contents ● Symmetric Compression Driver Horns
LVX 10
● All horns are rotatable
LVX 8 Dispersion
LVX 10 90° x 70°
LVX 8
LVX 12
LVX 15
90° x 40°
LVX 12 LVX 15
Impeccable Sound
LVX 8
Maximum Versatility
LVX 10
● Slanted Backside for monitor use
LVX 8
LVX 10
Rotatable Horn Angle Up
LVX 12
LVX 12
Yes 40°
LVX 15
45°
LVX 15
Advanced Technology DIGIPRO® Modules ● Lightweight and Small Sized ● 400W and 800W PRG Powers ● Class-D Digital Technology ● Switch Mode Power Supplies ● Highly Efficient Amplifiers (No Fans needed, Totally Silent) LVX 8
LVX 10
LVX 12
LVX 15
PRG Power
400W
800W
Peak Power
800W
1600W
LVX 8 / 10
LVX 12 / 15
Advanced Technology Digital Preamp with DSP The 24bit/48kHz DSP controls: ● Audio Crossover ● Frequency Response ● Dual Active Peak-RMS-Thermal limiter ● Acoustic Alignment
System Presets ● Flat ● Processed
Advanced Technology Controls ● Audio Input:
1 x XLRF - balanced / 1 x XLRM – balanced
● Link Out:
1 x jack 1/4” – balanced
● Power Connection:
VDE Mains Socket with Fuse
● Controls:
1x EQ Preset switch 1x Volume Knob 1x Mic/Line Sensitivity Switch 3x LEDs (Limiter, Signal, Ready)
Sturdy and Stylish Enclosures Cabinet Features ● Robust Plywood with Scratch-Resistant Paint ● Black and White Finish available ● Frontal Grille with Internal Foam
LVX 8 Box Material Front Grille
LVX 10
LVX 12
LVX 15
12mm Plywood
15mm Plywood
1.2mm Perforated Steel
1.5mm Perforated Steel
Sturdy and Stylish Enclosures Cabinet Features ● Flying Points ● Handles ● Pole Mount Cup
Flying Points Handles Pole Mount
LVX 8
LVX 10
LVX 12
LVX 15
10 x M8
12 x M8
12 x M10
12 x M10
1x top side, recessed
1x top side
1x top side, 1x side
1x top side, 1x side
Ø36mm, Aluminum
TILT VERTICAL BRACKET (FOR ALL MODELS)
TILT HORIZONTAL BRACKET (FOR ALL MODELS)
L80D Minibox Series
L80D Minibox • 2x 4inch. Woofers • 1x dome tweeter in coax with the upper woofer • 80W Class-D digital amplifier • Multiple DSP EQ presets available
p Passive Loudspeakers & Subs
Passive Speakers & Subs Summary
DVX P8
DVX P10
DVX P12
DVX P15
Passive Speaker 8” / 1” 600 Watts
Passive Speaker 10” / 1” 600 Watts
Passive Speaker 12” / 1.4” 1000 Watts
Passive Speaker 15” / 1.4” 1000 Watts
Passive Speakers & Subs
DVX P215 Passive Speaker (bi-amp mode option) 2x15” / 1.4” 2000 Watts
DVX PSW15 DVX PSW18 Passive Subwoofer 15” 1000 Watts
Passive Subwoofer 18” 2000 Watts
DVX PSW218 Passive Subwoofer 2x18” 2000 Watts
Passive Speakers & Subs Common Feature 2-way Speakers
● Multifunction 2-way passive speakers
● Rotatable high-frequency horns for stage monitor use
● State-of-the-art transducers
● Premium crossover with precision filters
● Self-resetting thermal protection on HF driver
● Multiplex birch plywood enclosures, sturdy and lightweight
● Rugged metal grille with acoustic foam
● Pole mount cup (Ø36mm)
● 12 rigging points
● Side flypins for wall-mount brackets
Passive Speakers & Subs Common Feature Subwoofers
● High-performance passive subwoofers
● High-quality woofers
● Bass reflex birch plywood cabinet, sturdy and lightweight
● Rugged metal grille
● Lateral handles housing
● M-20 pole mount plate
● Recesses for superimpose 2-ways speakers or another
subwoofer. ● Wheels predisposition
Passive
DVA M2P Passive line array module
Portable bi-amp battery powered speaker
- Mic/line XLR or TRS input - 16ch UHF diversity wireless built-in receiver - Stereo RCA input - Bluetooth® receiver - USB mp3 reader - Changeable battery
Digital Wireless Microphone System World-Wide Wireless Connectivity
Digital Wireless Microphone system
World-Wide Wireless Connectivity
Broadband operation in the whole radio-frequency range Country frequencies selection More than 90 transmitters simultaneously High interference rejection Digital quality audio Extremely low-latency Encrypted audio Innovative broadband antenna Fully programmable and upgradable via software
Digital Wireless Microphone system
Technical Specification System features Frequency range:
470 to 870 MHz hardware capability tuning for Tx and Rx Bands: Software defined Minimum frequency step: 25 KHz Modulation: Digital Multilevel Modulation Diversity function: True Diversity Latency: MAX 2.8 mS Dynamic Range: 108 dB Frequency response: 35Hz - 19KHz [+/- 1dB] Signal to noise range: 105 dB typical AD /DA converter: 24 bit Sample rate: 44.1 KHz
Digital Wireless Microphone system
Technical Specification
+3
Select
0 -3 -6
On
Up
I.R.
Down
-9 Push Ok
-15
Esc
Made in Italy
Power 15Vdc - 1A
Line Out Unbal
Mic Out Bal
Mic Line
ANT. “B”
Hub Bus
USB
SERVICE
ANT. “A”
* Moving-D Receiver is supplied with two “first use” antennas just to test the operation of the system
Moving-D Receiver Receiver size: Half rack size (19” rack mount frame adapter available) Display: Blue and withe LCD graphic dis. Audio Outputs: ¼” Jack Unbalanced XLR Bal., Mic/Line level switch PC Interface: USB Mini-B System Interface: RJ-11 connector for HUB 800 connection IrDA (infrared) system: Avaliable Antennas: 2 BNC “First Use” antennas* 2 BNC omnidirectional (optional) Power supply: 12-15 VDC Weight: 750g – 1.65 lbs.
Digital Wireless Microphone system
Technical Specification Moving-D Handheld Microphone capsule: cardioid capsule Input sensitivity Display: Frequency response: RF output power: Antenna: Input limiter: IrDA (infrared) system: Batteries: Battery life: Low battery warning: Weight:
Transmitter Bayerdynamic TG-X58 dynamic Adjustable OLED display 35Hz to 19KHz [+/- 1dB] 10mW / 50mW switchable Aerial Integrated Avaliable Avaliable 2x1,5V AA Type > 7 hours (Alkaline batteries) Avaliable 350g - 0.77lbs. (with batteries)
Digital Wireless Microphone system
Technical Specification
+ + 1.5V AA 1.5V AA CAUTION, RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USE BATTERIES ACCORDING TO THE INSTRUCTIONS.
Made in ITALY
Moving-D Bodypack Transmitter Display: OLED display Frequency response: 35Hz to 19KHz [+/- 1dB] RF output power: 10mW / 50mW switchable Mic Input Connector: 4-Pin Mini-XLR Guitar/Bass cable: ¼” jack to Mini-XLR, lowcapacity cable, 1m Input sensitivity: adjustable Input limiter: Avaliable Peak indicator: Avaliable (Also on receiver display by telemetry) Batteries: 2x1,5V AA Type Low battery warning: Yes Battery life: > 7 hours (Alkaline batteries) Weight: 250g - 0.55lbs. (with batteries)
Digital Wireless Microphone system
Broadband Performance Entire radio-frequency range in a single system
MOVING-D is the first microphone wireless system in the world with 400 MHz continuous working range without band switch
it can use the entire radio-frequency range (470-870 MHz), where permitted from country regulation
MOVING-D is ready for each country without the need of creating systems for local frequency bands
Digital Wireless Microphone system
Broadband Performance Both Rx and Tx operate in the whole band
Normally, transmitters of competitor’s systems operate only on portions of the whole radiofrequency range.
With MOVING-D you don’t need to change transmitter whenever interference is experienced or regulations change
Digital Wireless Microphone system
Easy “Quick-Start” Frequency Selection 150
120
90
60
30
0
30
60
90
120
150
Country frequencies selection Due to the fact that each country has different regulations regarding the use of radio frequencies, MOVING-D is able to discriminate between those permitted in the selected country of use 60
30
Equator
You only need to choose the country by using the onboard OLED display or via USB through the dedicated software for Windows™ 0
Each country contains a batch of frequencies, specifically calculated by the internal engine, without intermodulation interference 30
60
150
120
90
60
30
0
30
60
90
120
150
Digital Wireless Microphone system
Fast Rx/Tx Setup System +3 0 On/Stby
-3
Select Up
-6 -9
I.R. Down
-15
Push Ok
Esc
Infrared Communica)on
Infrared Communica)on
IrDA (infrared) Rx/Tx setup communication system Once you set the operating frequencies on the receiver, you can automatically setup the transmitter through the on-board infrared communication system, avoiding boring manual procedures Using the PC software interface will be possible to transfer the singer name on the OLED transmitter display
Digital Wireless Microphone system
The real breakthrough: The Tracking Filter More than 90 transmitters simultaneously
The broadband receiver operates with narrow and automatically-tunable input filters over the whole bandwidth, permitting a lot of microphones to operate together without mutual interference
The system has been tested with 100 transmitters without interference!
Digital Wireless Microphone system
Full compatibility with Regulations 4-level digital modulation system It increases the amount of transmitted information (KBPS) while assuring the total compatibility with European regulations (ETSI)
Digital Wireless Microphone system
Cristal Clear Digital Sound
Digital Quality Audio 44.1kHz / 16bit audio without “pumping”, due to the “compander-free” circuitry and the patented dBTechnologies algorithm Extremely Low Latency
Max 2.8mS latency that avoids the effect of delayed sound, typical of other digital wireless systems
Digital Wireless Microphone system
Utmost Discretion
Password Encrypted Audio Guarantees the utmost discretion in any context (Corporate, Military, Government applications), thanks to the 48-bit random encryption key
This means that you can’t decrypt the audio signal even if you use another Moving-D in the nearby
Digital Wireless Microphone system
Broadband Antenna Technology
Omnidirectional Antenna Innovative broadband antenna from 470 MHz to 870 MHz, which allows a reception within 100 meters (in the absence of strong interference as DTV or radio antennas near the receiver, etc.) A single antenna is used on all MOVING-D systems Each hourglass antenna is supplied with a featured stand adapter for easy positioning
Digital Wireless Microphone system
Broadband Antenna Technology
Directive log–periodic antenna 470-870 MHz For external and internal application where directivity is needed Mic stand adapter included
Digital Wireless Microphone system
Broadband Antenna Technology
“First Use” Antenna • Each Receiver is supplied with two “first use” antennas just to test the operation of the system
Digital Wireless Microphone system
Fully programmable and upgradable via Software Moving-D Uploader A dedicated Uploader for Windows® operating systems allows you to keep up to date your Moving-D
The receiver is equipped with a USB Mini-B through which you can connect to a PC and upload the firmware
Once done you can send the new firmware to the transmitter via infrared connection
The latest Firmware is available on www.dbtechnologies.com
Digital Wireless Microphone system
Fully programmable and upgradable via Software Moving-D Managing Software Complete managing software (available on www.dbtechnologies.com) for:
Spectrum analyzer Country selection
Automatic frequency scan Intermodulation calculation Transmitter gain adjust
… and many others
UHF Diversity Wireless Microphone System
UHF Diversity Wireless Microphone System
System Overview Analog heart, digital mind Moving one combines the best of analog tradition with the contribution of digital technology It provides a more noise-free and interference-free audio signal in any situation 6 frequency bands (518 – 865MHz) Band 1 = 518-542 MHz Band 2 = 606-630 MHz Band 3 = 662-686 MHz Band 4 = 742-766 MHz Band 6 = 823 - 832 MHz Band 7-ISM = 863-865 MHz
UHF Diversity Wireless Microphone System
System Overview Digital Code Squelch Technology In addition to the audio data, the system handles further telemetry information, like system on/off and charge level of transmitter battery. Main advantages of Digital Code Squelch technology: Squelch adjustments are no longer necessary It prevents any interference to enter the receiver when transmitter is turned off
UHF Diversity Wireless Microphone System
System Overview Improved Diversity Technology Diversity system with digital-assisted antenna selection and monolithic-chip switch circuitry This technology guarantees a virtually inaudible switching between the two antennas Automatic free-frequency research The system automatically searches for free frequencies and, in case of disturbed channels, a LED flashes indicating the presence of interference The selected frequency of the receiver is then sent to the transmitter via infrared with a simple operation
UHF Diversity Wireless Microphone System
System Overview Infrared Rx/Tx setup communication system
Once you set the operating frequencies on the receiver, you can automatically setup the transmitter through the on-board infrared communication system, avoiding boring manual procedures
Compliance with European standards
Moving one complies with European standards
UHF Diversity Wireless Microphone System
System Technical Specifications
6 frequency bands available (518 – 865 MHz) Up to 25 MHz wide bands (ISM Europe – 2 MHz) Up to 80 channels available divided in 10 groups (ISM up to 40 channels divided in 10 groups) Diversity system with automatic free-frequency research It is possible to increase the number of channels by using multiple bands Digital Code Squelch for extremely quiet power on/off operation and no squelch adjustments needed 100m receiving distance (outdoor use) 40Hz - 18kHz [+/- 2dB] frequency response 104dB S/N ratio [A-weighted]
UHF Diversity Wireless Microphone System
Packages Overview Moving one H
Moving one receiver Handheld transmitter External power supply and 2x 1,5V AA type batteries
Moving one B
Moving one receiver Bodypack transmitter Beyerdynamic® headset Instrument optimized impedance with featured low capacitance cable (optional) External power supply and 2x 1,5V AA type batteries
UHF Diversity Wireless Microphone System
Moving one Receiver
Intuitive user interface with only 4 buttons and a 2-digit LED display, 7 segments each Diversity receiver with digital switching system between the two antennas Busy channel or interference indication on the receiver 100m receiving distance (in open space and without interference) Infrared Rx/Tx communication system Low battery warning indication XLR balanced and ¼” (6.3mm) Jack balanced/unbalanced outputs
UHF Diversity Wireless Microphone System
Moving-one Handheld Transmitter
Condenser capsule, particularly brilliant Adjustable capsule gain with two position selector: HIGH +10dB (speak), LOW 0dB (sing) Transmission power between 10 mW and 50 mW factory defined in function of Country regulations Constant Tx/Rx transmission of information related to mute and battery status Infrared Rx/Tx communication system Integrated Antenna 2x1,5V AA type batteries Battery life of approximately 18 hours (Alkaline batteries)
UHF Diversity Wireless Microphone System
Moving one Bodypack Transmitter
Beyerdynamic® headset with condenser capsule Adjustable capsule gain with three position selector: : HIGH (+10dB), MID (0dB) and LOW (-10dB) Transmission power between 10 mW and 50 mW factory defined in function of Country regulations Constant Tx/Rx transmission of information related to mute and battery status Infrared Rx/Tx communication system Integrated Antenna Instrument optimized impedance with featured low capacitance cable (optional) 2x1,5V AA type batteries Battery life of approximately 18 hours (Alkaline batteries)
Active:
NEW PRODUCTS 2015 Complete products list
dBTechnologies Italy May 2015 Rev. Cantalù Marco
Passive:
•
Ingenia IG1T
•
DVX P8
•
Ingenia IG2T
•
DVX P10
•
Ingenia IG3T
•
DVX P12
•
Ingenia IG4T
•
DVX P15
•
DVX P215
•
ES 503
•
DVX PSW15
•
ES 602
•
DVX PSW18
•
ES 802
•
DVX PSW218
•
LVX 8
•
DVA Mini M2P
•
LVX 10
•
LVX 12
•
LVX 15
•
Ready 4
•
Minibox L80D
•
Radio Microphones: •
Moving D
•
Moving One
